Experimental research on the influence of the air humidity conditions in an air conditioning system

The factors that have influence on the energy consumption of a small air conditioning system that are worth mentioning are the efficiencies of the compressor, evaporator and condenser, the form that the refrigerant flow is controlled, the fan model used, and climatic conditions. Within the climate issue, an interesting factor is that the relative humidity when it comes to the effect that it causes, especially in the performance of the air condenser, which generally is not considered in the projects. This study aims to evaluate the influence of humidity on the coefficient of system performance (COP), seeking to quantify their influence when it happens. The tests were performed on a testing bench, mounted at the Laboratory for Energy Efficiency (LAMOTRIZ) UNESP-Campus Guaratinguetá. In the study, the wet bulb temperature was ranged, keeping the rotation of the scroll compressor with application of a frequency inverter in its best performance. The test bench is provided with a supervisory system of data collection that is also able to control all functions of the bench. In the results, there was a significant influence, particularly when comparing high humidity conditions with low humidity, noting that only over 65% relative humidity is that significant changes are observed in the COP of the system. © 2013 Elsevier Inc.

Test-retest reliability of a 3-min isokinetic all-out test using two different cadences

Objectives: To investigate the test-retest reliability of mechanical parameters derived from a 3-min isokinetic all-out test, performed at 60 and 100 rpm. Reliability and validity of the peak oxygen uptake derived from 3-min isokinetic all-out test were also tested. Design: 14 healthy male subjects completed an incremental ramp testing and four randomized 3-min isokinetic all-out test (two at 60 rpm and two at 100 rpm). Methods: The absolute and relative reliability of the following parameters were analyzed: peak power, mean power, end power, fatigue index, work performed above end power and peak oxygen uptake. Results: No difference was found between each two sets of data, although there were between-cadence differences for peak power, mean power, end power, and fatigue index. Higher intra-class correlation (ICC) and lower coefficient of variation (CV) were found for end power (ICC = 0.91 and 0.95; CV = 5.6 and 5.7%) and mean power (ICC = 0.97 and 0.98; CV = 2.4 and 3.1%), than for peak power (ICC = 0.81 and 0.84; CV = 8.7 and 10%) and work performed above end power (ICC = 0.79 and 0.84; CV = 7.9 and 10.6%; values reported for 60 rpm and 100 rpm, respectively). High reliability scores were also observed for peak oxygen uptake at both cadences (60 rpm, CV = 3.2%; 100 rpm, CV = 2.3%,) with no difference with the incremental ramp testing peak oxygen uptake. Conclusions: The power profile and peak oxygen uptake of a 3-min isokinetic all-out test are both highly reliable, whether the test is performed at 60 or 100 rpm. Besides, peak oxygen uptake and work performed above end power were not affected by the change in cadence while peak power, mean power, end power, and fatigue index were. © 2013.

The structural heterogeneity of family farming in Brazil

Includes bibliography.

Voltammetric determination of Δ 9-THC in glassy carbon electrode: an important contribution to forensic electroanalysis

A new voltammetric method for the determination of Delta(9)-tetrahydrocannabinol (Delta(9)-THC) is described. The voltammetric experiments were accomplished in N-N dimethylformamide/water (9: 1, v/v), using tetrabutylammonium tetrafluoroborate (TBATFB) 0.1 mol/L as supporting electrolyte and a glassy carbon disk electrode as the working electrode. The anodic peak current was observed at 0.0 V (vs. Ag/AgCl) after a 30 s pre-concentration step under an applied potential of -1.2 V (vs. Ag/AgCl). A linear dependence of Delta(9)-THC detection was obtained in the concentration range 2.4-11.3 ng/mL, with a linear correlation coefficient of 0.999 and a detection limit of 0.34 ng/mL. The voltammetric method was used to measure the content of Delta(9)-THC in samples (hemp and hashish) confiscated by the police. The elimination of chemical interferences from the samples was promptly achieved through prior purification using the TLC technique, by employing methanol/water (4: 1, v/v) as the mobile phase. The results showed excellent correlation with results attained by HPLC.

Determination of ethyl carbamate in cachaça produced from copper stills by HPLC

Ethyl carbamate (EC) is a common substance in fermented foods and drinks, and its quantification is important because of its carcinogenic nature and its usually presence in alcoholic beverages. The present work involved the development and validation of an analytical method for the evaluation of EC in cachaça by HPLC-FLD after previous derivatization with xanthydrol. The method presented a mean recovery of 94.88%, an intra-day precision of 4.19% (30.0 μg L−1) and 3.32% (75.0 μg L−1), a coefficient of determination (r2) equal to 0.9985, and limits of detection and quantification equal to 6.39 and 21.32 μg L−1, respectively. The results show that the analytical method is accurate, reproducible and linear over the concentration range from 5.0 to 160 μg of EC per litre. The method was applied to the analysis of EC in cachaça, the analyses being rapid and efficient.

Determinants of unfair inequality in Brazil, 1995 and 2009

This article analyses the trend of unfair inequality in Brazil (1995-2009) using a nonparametric approach to estimate the income function. The entropy metrics introduced by Li, Maasoumi and Racine (2009) are used to quantify income differences separately for each effort variable. A Gini coefficient of unfair inequality is calculated, based on the fitted values of the non-parametric estimation; and the robustness of the estimations, including circumstantial variables, is analysed. The trend of the entropies demonstrated a reduction in the income differential caused by education. The variables “hours worked” and “labour-market status” contribute significantly to explaining wage differences imputed to individual effort; but the migratory variable had little explanatory power. Lastly, the robustness analysis demonstrated the plausibility of the results obtained at each stage of the empirical work.

Industrial location and sectoral linkages: the case of the Brazilian automotive industry

The aim of this article is to analyse the spatial distribution of the automotive industry in Brazil in terms of its various economic categories between 1995 and 2011, and to shed light on its sectoral linkages through inter-regional input-output matrices. By calculating the coefficient of localization (QLij) for that period, it was found that the third wave of investments, which began in the second half of the 1990s, actually caused a slight spatial deconcentration of this sector in the national economy. The coefficient of geographic association (CAik)calculated for different years revealed a slight reduction, while maintaining a high level of concentration, which suggests that vehicle production is closely integrated with other economic activities. This integration was corroborated particularly in terms of input purchases (backward linkages) in all of the analysed regions.

Geração de segundo harmônico em vidros teluritos TeO2 – LiNbO3

Pós-graduação em Ciência dos Materiais - FEIS

Evaluation via multivariate techniques of scale factor variability in the rietveld method applied to quantitative phase analysis with X ray powder diffraction

ABSTRACT: The present work uses multivariate statistical analysis as a form of establishing the main sources of error in the Quantitative Phase Analysis (QPA) using the Rietveld method. The quantitative determination of crystalline phases using x ray powder diffraction is a complex measurement process whose results are influenced by several factors. Ternary mixtures of Al2O3, MgO and NiO were prepared under controlled conditions and the diffractions were obtained using the Bragg-Brentano geometric arrangement. It was possible to establish four sources of critical variations: the experimental absorption and the scale factor of NiO, which is the phase with the greatest linear absorption coefficient of the ternary mixture; the instrumental characteristics represented by mechanical errors of the goniometer and sample displacement; the other two phases (Al2O3 and MgO); and the temperature and relative humidity of the air in the laboratory. The error sources excessively impair the QPA with the Rietveld method. Therefore it becomes necessary to control them during the measurement procedure.

A Importância da variável climática na produtividade da soja no Sudoeste de Goiás

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Growth curve of female collared peccaries (Pecari tajacu) raised in captivity in the Brazilian Amazon Region

Com o objetivo de ajustar modelos não-lineares, foram utilizados registros mensais do peso de 10 fêmeas de cateto (Pecari tajacu) coletados durante dois anos, no criatório do campo experimental Álvaro Adolfo da Embrapa Amazônia Oriental, Belém, PA. Utilizaram-se os modelos de Von Bertalanffy, Brody, Gompertz e Logístico. Os parâmetros foram estimados usando o procedimento NLIN do aplicativo SAS. Os critérios utilizados para verificar o ajuste dos modelos foram: desvio padrão assintótico (ASD); coeficiente de determinação (R²); desvio médio absoluto dos resíduos (ARD) e o índice assintótico (AR). Os modelos Brody e Logístico estimaram, respectivamente, o maior (19,44kg) e o menor (19,18kg) peso assintótico (A), caracterizando a menor (0,0064kg/dia) e a maior (0,0113kg/dia) taxa de maturação (K), haja vista a natureza antagônica entre estes parâmetros, comprovada pela correlação fenotípica variando entre -0,75 à -0,47. O modelo Brody estimou o menor valor para o ARD, fator limitante para caracterizar o menor valor para o AR por este modelo. Considerando o AR, o modelo Brody apresentou o melhor ajuste, contudo, pelos valores encontrados, os demais modelos também apresentaram ajuste adequando aos dados ponderais da referida espécie/sexo. Com base no AR adotado neste trabalho, recomenda-se o modelo Brody para ajustar a curva de crescimento de fêmeas de cateto (Pecari tajacu). Em razão dos valores estimados, sobretudo, para a K, essa característica pode ser incluída em um índice de seleção. Contudo, estudos com grupos mais representativos e criados em outras condições se faz oportuno.

Collecting and evaluation of germplasm of spiked pepper from Brazilian Amazon

Piper aduncum L. é uma planta que ocorre na Amazônia Brasileira com elevado teor de óleo essencial e que apresenta propriedades biológicas utilizáveis na agricultura e saúde humana. Com o objetivo de avaliar germoplasma visando ao melhoramento genético e cultivo econômico, realizaram-se coletas (inflorescências, estacas, folhas e ramos finos) em dez municípios da Amazônia Brasileira (Manaus, Marabá, Goianésia, Moju, Belém, Santa Izabel, Americano, Bonito, Santarém Novo e Aveiro). Tomaram-se dados do ambiente, populações e de doze caracteres morfoagronômicos (número de folhas por ramo, comprimento da folha, largura da folha, circunferência do ramo mais velho, altura da planta, número de ramos ortotrópicos, número de ramos plagiotrópicos, comprimento do entrenó, número de espigas por ramo, rendimento de óleo, teor e produção de dilapiol). As inflorescências e estacas foram identificadas e encaminhadas para a UFRA em Belém-PA e, as folhas e ramos finos, para o Museu Paraense Emílio Goeldi-MPEG, para extração do óleo essencial (hidrodestilação). Utilizaram-se estimadores de média, desvio padrão, coeficiente de variação e amplitude total para estudo da variabilidade fenotípica. As matrizes prevalenceram em ambientes antropizados, solos argilosos, condições de drenagem variáveis, terrenos planos e clima Ami, como também predominaram populações definíveis pela agregação dos indivíduos, em terra alta e a pleno sol, serrapilheira, tamanho das populações e presença de plântulas no chão muito variáveis. Os caracteres de maior variabilidade foram número de ramos ortotrópicos, número de espigas por ramo, circunferência do ramo mais velho (morfológicos), teor e produção de dilapiol (agronômicos). Concluiu-se que a espécie apresenta adaptação a diferentes ambientes com relação à vegetação, solo, clima, relevo e drenagem, facilitando o cultivo e domesticação. Há variabilidade morfoagronômica favorecendo a seleção e fitomelhoramento.

Effect of lipid sources and inclusion levels in diets for broiler chickens

This research aimed to evaluate the interactions and effects of 2 and 4% addition levels of poultry slaughterhouse fat (chicken tallow) and soybean oil in diets for broiler chickens. Two experiments were carried out using one-day-old male Cobb chicks in an entirely random design with a 2x2 factorial scheme. In the first experiment, 560 chicks were used to evaluate performance and carcass characteristics. In the second experiment, 100 chicks were used to determine the nutrient digestibility, dietary energy utilization and the lipase and amylase pancreatic activity. There was no interaction between the fat sources and the addition levels for any of the analyzed variables, except for the digestibility coefficient of dry matter (DCDM), which was higher in diets added with 2% soybean oil when compared to chicken tallow. The addition of 4% fat in the diet, regardless of fat source, improved the digestibility coefficient of ethereal extract (DCEE) and increased weight gain and feed intake. Moreover, in the initial phase, the addition of 4% fat to the diet increased lipase activity when compared to diets with 2% addition, and a positive correlation between DCEE and pancreatic lipase activity was observed. In conclusion, there is no interaction between fat sources and addition levels, except for DCDM. Carcass characteristics are not influenced by any of the studied factors. The addition of 4% fat increases pancreatic lipase activity and improves DCEE, resulting in greater weight gain, regardless of the tested fat source, making chicken tallow a great alternative to soybean oil.

Chemical composition and metabolizable energy values of corn germ meal obtained by wet milling for layers

An experiment was carried out to determine the chemical composition, metabolizable energy values, and coefficients of nutrient digestibility of corn germ meal for layers. The chemical composition of corn germ meal was determined, and then a metabolism assay was performed to determine its apparent metabolizable energy (AME) and apparent metabolizable energy corrected for nitrogen (AMEn) values and its dry matter and gross energy apparent metabolizability coefficients (CAMDM and CAMGE, respectively). In the 8-day assay (four days of adaptation and four days of total excreta collection), 60 29-week-old white Lohman LSL layers were used. A completely randomized experimental design, with three treatments with five replicates of four birds each, was applied. Treatments consisted of a reference diet and two test diets, containing 20 or 30% corn germ meal. Results were submitted to analysis of variance and means were compared by the Tukey tests at 5% probability level. The chemical composition of corn germ meal was: 96.39% dry matter, 49.48% ether extract, 1.87% ashes, 7243 kcal gross energy/kg, 11.48% protein, 0.19% methionine, 0.21% cystine, 0.48% lysine, 0.40% threonine, 0.72% arginine, 0.35% isoleucine, 0.83% leucine, 0.57% valine, and 0.37% histidine, on as-fed basis. There were no statistical differences in AME, AMEn, CAMDM, and CAMGE values with the inclusion of 20 and 30% corn germ meal in the diets. On dry matter basis, AME, AMEn, CAMDM, and CAMGE values of corn germ meal were: 4,578 and 4,548 kcal/kg, 4,723 and 4,372 kcal/kg, 64.95 and 61.86%, respectively.

Magnetic susceptibility in the prediction of soil attributes in two sugarcane harvesting management systems

This study aimed to investigate the potential use of magnetic susceptibility (MS) as pedotransfer function to predict soil attributes under two sugarcane harvesting management systems. For each area of 1 ha (one with green sugarcane mechanized harvesting and other one with burnt sugarcane manual harvesting), 126 soil samples were collected and subjected to laboratory analysis to determine soil physical, chemical and mineralogical attributes and for measuring of MS. Data were submitted to descriptive statistics by calculating the mean and coefficient of variation. In order to compare the means in the different harvesting management systems it was carried out the Tukey test at a significance level of 5%. In order to investigate the correlation of the MS with other soil properties it was made the correlation test and aiming to assess how the MS contributes to the prediction of soil complex attributes it was made the multiple linear regressions. The results demonstrate that MS showed, in both sugarcane harvesting management systems, statistical correlation with chemical, physical and mineralogical soil attributes and it also showed potential to be used as pedotransfer function to predict attributes of the studied oxisol.