Efeito da combinação de antibióticos e sinvastatina sobre microrganismos de interesse endodôntico e na expressão de marcadores odontoblásticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de uma tecnologia de produção de iogurtes funcionais com leite de cabra contendo fibra Beta vulgaris e frutos de Vaccinium cylindraceum

Dissertação de Mestrado, Tecnologia e Segurança Alimentar, 02 de Junho de 2014, Universidade dos Açores.

Influência da espessura do substrato dental sobre a eficácia clareadora e citotoxicidade de diferentes protocolos de clareamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Implementação de uma marca de produção e distribuição de citrinos biológicos: Orange made in Algarve

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

Sensitive bi-enzymatic biosensor based on polyphenoloxidases–gold nanoparticles–chitosan hybrid film–graphene doped carbon paste electrode for carbamates detection

A bi-enzymatic biosensor (LACC–TYR–AuNPs–CS/GPE) for carbamates was prepared in a single step by electrodeposition of a hybrid film onto a graphene doped carbon paste electrode (GPE). Graphene and the gold nanoparticles (AuNPs) were morphologically characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, dynamic light scattering and laser Doppler velocimetry. The electrodeposited hybrid film was composed of laccase (LACC), tyrosinase (TYR) and AuNPs entrapped in a chitosan (CS) polymeric matrix. Experimental parameters, namely graphene redox state, AuNPs:CS ratio, enzymes concentration, pH and inhibition time were evaluated. LACC–TYR–AuNPs–CS/GPE exhibited an improved Michaelis–Menten kinetic constant (26.9 ± 0.5 M) when compared with LACC–AuNPs–CS/GPE (37.8 ± 0.2 M) and TYR–AuNPs–CS/GPE (52.3 ± 0.4 M). Using 4-aminophenol as substrate at pH 5.5, the device presented wide linear ranges, low detection limits (1.68×10− 9 ± 1.18×10− 10 – 2.15×10− 7 ± 3.41×10− 9 M), high accuracy, sensitivity (1.13×106 ± 8.11×104 – 2.19×108 ± 2.51×107 %inhibition M− 1), repeatability (1.2–5.8% RSD), reproducibility (3.2–6.5% RSD) and stability (ca. twenty days) to determine carbaryl, formetanate hydrochloride, propoxur and ziram in citrus fruits based on their inhibitory capacity on the polyphenoloxidases activity. Recoveries at two fortified levels ranged from 93.8 ± 0.3% (lemon) to 97.8 ± 0.3% (orange). Glucose, citric acid and ascorbic acid do not interfere significantly in the electroanalysis. The proposed electroanalytical procedure can be a promising tool for food safety control.

Organic versus conventional tomatoes: Influence on physicochemical parameters, bioactive compounds and sensorial attributes

The effect of organic and conventional agricultural systems on the physicochemical parameters, bioactive compounds content, and sensorial attributes of tomatoes (‘‘Redondo’’ cultivar) was studied. The influence on phytochemicals distribution among peel, pulp and seeds was also accessed. Organic tomatoes were richer in lycopene (+20%), vitamin C (+30%), total phenolics (+24%) and flavonoids (+21%) and had higher (+6%) in vitro antioxidant activity. In the conventional fruits, lycopene was mainly concentrated in the pulp, whereas in the organic ones, the peel and seeds contained high levels of bioactive compounds. Only the phenolic compounds had a similar distribution among the different fractions of both types of tomatoes. Furthermore, a sensorial analysis indicated that organic farming improved the gustative properties of this tomato cultivar.

Uma abordagem à incorporação de lenhinosulfonatos e materiais reciclados em misturas de SBR para produção sustentável de solas

Mestrado em Engenharia Química - Ramo Otimização Energética na Indústria Química

Modelling of a wastewater treatment plant using GPS-X

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Portucel: Equity research

UNL - NSBE

Lucuma as an exotic high quality fruit imported into Portugal and the UE

This project has two different goals, one of them is to promote the consumption of exotic fruits with high quality. The other goal of the project is to look for the viability of turning this work project into a real business, focusing in two different channels to diversify its revenues: B2B and B2C. In order to achieve this second goal, this project aims to see the best way to commercialize this product (Lucuma powder and Pulp of Lucuma) and how to make it in an efficient way with right companies. Therefore, the project aims to create a company to commercialize the product between the producers in Peru and possibly small businesses interested in acquire the processed fruit and also individuals interested in own consumption in small quantities. This project, if successful, tries to diversify the consumption into other good organic healthy products in the long-term.

Hiokerejektien käsittely MC-sakeudessa

Työn tavoitteena oli optimoida LWC-paperitehtaan kahden hiomolinjan rejektinkäsittelyt. Uusituilla rejektilinjoilla on käytössä keskisakeusrejektinjauhatus. Työn keskeinen osa oli teräkoeajot, teräsarjoja tutkittiin kuusi, kolme molemmilla linjoilla. Kahdessa ensimmäisessä teräkoeajossa oli molemmilla linjoilla samanlaiset jauhinterät. Teräkoeajojen tuloksista havaittiin yleisellä tasolla, että suurin osa mitatuista ominaisuuksista parani jauhatusastetta nostettaessa. Ainoastaan repäisylujuus heikkeni. Terävaihtoehdoista pystyttiin poimimaan molemmille linjoille sopiva terävaihtoehto. Rejektinlajittelun havaittiin parantavan edelleen massan laatuominaisuuksia, paitsi repäisylujuutta. Toisena osuutena vertailtiin keskisakeusjauhimen terävaihtoehtoa, jolla saavutettiin hyviä tuloksia, toisen paperitehtaan korkeassa sakeudessa jauhettuun rejektiin. Korkeasakeusjauhimen terää ei erityisesti valikoitu koeajoa varten. Tuloksista havaittiin, että keskisakeusjauhimella saadaan aikaan varsin hyvää LWC-paperiin käytettävää massaa. Keskisakeudessa jauhettu massa oli monilta ominaisuuksiltaan jopa parempaa kuin korkeasakeusjauhimen massa. Työn kolmannessa osuudessa ajettiin rejektilinjalla sakeuskoeajo. Sakeuskoeajosta havaittiin, että optiset ominaisuudet olivat parhaimmillaan jauhimen MC-sakeusalueen keskivaiheilla. Jauhatussakeuden noustessa kuidut jäivät jäykemmiksi ja karkeammiksi. Tikkupitoisuus oli sitä pienempi, mitä alhaisempaa jauhatussakeutta käytettiin. Sakeudella ei ollut selvää vaikutusta lujuusominaisuuksiin. Tulosten perusteella paras jauhatussakeus keskisakeusjauhimella oli sakeusalueen puoliväli. Työn viimeisenä osana selvitettiin miten kytkentämuutos, jossa rejektilinjan viimeisen lajittimen rejekti käännettiin palaamaan jälkilajittelun sijaan rejektilinjan kaariseulalle, vaikutti koko hiomon kapasiteettiin ja rejektilinjan massan laatuun. Koeajojen tuloksena havaittiin, että kytkentämuutolla pystyttiin nostamaan koko hiomon kapasiteettia ja rejektilinjan akseptin laatu parani.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Effects of naringenin on glucose uptake in L6 skeletal muscle cells

Diabetes mellitus is a disorder of inadequate insulin action and consequent high blood glucose levels. Type 2 diabetes accounts for the majority of cases of the disease and is characterized by insulin resistance and relative insulin deficiency resulting in metabolic deregulation. It is a complex disorder to treat as its pathogenesis is not fully understood and involves a variety of defects including ~-cell failure, insulin resistance in the classic target tissues (adipose, muscle, liver), as well as defects in a-cells and kidney, brain, and gastrointestinal tissue. Present oral treatments, which aim at mimicking the effects of insulin, remain limited in their efficacy and therefore the study of the effects of novel compounds on insulin target tissues is an important area of research both for potentially finding more treatment options as well as for increasing our knowledge of metabolic regulation in health and disease. In recent years the extensively studied polyphenol, resveratrol, has been reported to have antidiabetic effects showing that it increases glucose uptake by skeletal muscle cells and prevents fatty acid-induced insulin resistance in vitro and in vivo. Naringenin, a citrus flavonoid with structural similarities to resveratrol, is reported to have antioxidan.t, antiproliferative, anticancer, and anti-inflammatory properties. Effects on glucose and lipid metabolism have also been reported including blood glucose and lipid lowering effects. However, whether naringenin has insulinlike effects is not clear. In the present study the effects of naringenin on glucose uptake in skeletal muscle cells are examined and compared with those of insulin. Naringenin treatment of L6 myotubes increased glucose uptake in a dose- and time dependent manner and independent of insulin. The effects of naringenin on glucose uptake achieved similar levels as seen with maximum insulin stimulation and its effect was additive with sub-maximal insulin treatment. Like insulin naringenin treatment did not increase glucose uptake in myoblasts. To elucidate the mechanism involved in naringenin action we looked at its effect on phosphatidylinositol 3-kinase (PI3K) and Akt, two signalling molecules that are involved in the insulin signalling cascade leading to glucose uptake. Naringenin did not stimulate basal or insulinstimulated Akt phosphorylation but inhibition of PI3K by wortmannin partially repressed the naringenin-induced glucose uptake. We also examined naringenin's effect on AMP-activated protein kinase (AMPK), a molecule that is involved in mediating glucose uptake by a variety of stimuli. Naringenin stimulated AMPK phosphorylation and this effect was not inhibited by wortmannin. To deduce the nature of the naringenin-stimulated AMPK phosphorylation and its impact on glucose uptake we examined the role of several molecules implicated in mod.ulating AMPK activity including SIRTl, LKB 1, and ca2+ Icalmodulin-dependent protein kinase kinase (CaMKK). Our results indicate that inhibition of SIRTI did not prevent the naringeninstimulated glucose uptake Of. AMPK phosphorylation; naringenin did not stimulate LKB 1 phosphorylation; and inhibition of CaMKK did not prevent naringeninstimulated glucose uptake. Inhibition of AMPK by compound C also did not prevent naringenin-stimulated glucose uptake but effectively inhibited the phosphorylation of AMPK suggesting that AMPK may not be required for the naringenin-stimulated glucose uptake.

Ontario Paper Company Limited

On February 29, 1912 The Ontario Paper Company Limited was incorporated under the leadership of Col. Robert R. McCormick. Four months later construction began in Thorold, Ontario as this location was best for the abundance of power and water and water transportation. The first machine was started at the mill on September 5, 1913. The mill was one of the most advanced of its era, using electricity instead of water power. The mill was also the first of its kind as it combined pulp and paper making instead of separating the two operations.

Walker Brothers Quarries Limited fonds, 1975, 1980-1981, 1984, 1987-1989

Serving the Niagara and surrounding areas for over 120 years, Walker Industries has made its impact not only commercially, but also culturally. Beginning in 1875 with the erection of a stone sawing mill on a property John Walker purchased from the Welland Canal Loan Company. One of the first projects Walker cut stone for was the Merritton Town Hall. In 1882 the business expanded to include Walkers children, changing the name to Walker & Sons. Eventually in 1887 the two eldest sons took control of the business operation and their partnership changed the company’s name to Walker Brothers, the same year the company began operating its first quarry. The quarry was conveniently located alongside the 3rd Welland canal, offering easy access to Toronto and Hamilton. It was also close to the railway system which allowed immediate access to Thorold and Niagara Falls and later access to parts of Ontario and Quebec. The quarry supplied stone to build numerous halls and armouries across Ontario. A use was also found for the ‘waste products’ of cutting the limestone. Leftover stone chips were sent to paper mills, where stone was needed as part of the sulphite pulp process for making paper. Beginning to supply the Ontario Paper Company with stone in 1913, meant not only long, hard, work, but also more profit for the company. Before mechanization, most of the loading and unloading of the stone was done by hand, taking 19 man-hours to load an 18 yard railway car. Mechanization followed in 1947 when the plant became fully mechanized making the work easier and increasing production rates. In 1957 the company moved from its original location and opened the St. Catharines Crushed Stone Plant.