A importância das revistas Química Nova e Journal of the Brazilian Chemical Society no crescimento da área de química no Brasil

Quimica Nova and the Journal of the Brazilian Chemical Society are two examples of successful initiatives taken by the Brazilian Chemical Society (SBQ - Sociedade Brasileira de Química), and may serve as models for the scientific societies of developing countries. Pillars of the SBQ, these two periodicals are undeniable demonstrations that idealism, utopia and dignity are the essential ingredients for transforming dreams into reality. Few believed that the Brazilian chemical community would one day have, as it does today, two scientific research periodicals indexed in the principal international data banks.

Chemical composition and antimicrobial activity of the essential oil from Aeolanthus suaveolens Mart. ex Spreng

The essential oils from leaves (sample A) and flowers (sample B) of Aeolanthus suaveolens Mart. ex Spreng were obtained by hydrodistillation and analyzed by GC, GC-MS, and chiral phase gas chromatography (CPGC). Six compounds have been identified from the essential oils, representing ca 94.3 and 93% of the oils corresponding to samples A and B, respectively. The major constituents of samples A and B essential oils were respectively, linalool (34.2%/34.9%), (-)-massoialactone (25.9%/17.0%) and (E)-beta-farnesene (25.4%/29.1%). The enantiomeric distribution of the monoterpene linalool was established by analysis on heptakis- (6-O-methyl-2,3-di-O-pentyl)-beta-cyclodextrin capillary column. The antimicrobial activity of the essential oil from leaves and isolated compounds was also evaluated.

Chemical constituents from Tabernaemontana catharinensis root bark: a brief NMR review of indole alkaloids and in vitro cytotoxicity

This work describes the isolation and structural determination of pharmacological compounds present in the bark of roots of Tabernaemontana catharinensis (Apocynaceae). Among the 27 substances detected 12 were identified as terpenoid-indole alkaloids, 2 steroids and 13 pentacyclic triterpenes. Structures were outlined based on HMQC, COSY, DEPT, 13C, and ¹H NMR data and MS. Spectral data of indole alkaloids were reviewed. An in vitro screening of the extracts and isolated compounds was carried out. Compounds ibogamine (5), 3-oxo-coronaridine (9) and 12-methoxy-4-methylvoachalotine (MMV) demonstrated effective cytotoxicity towards SKBR-3 breast adenocarcinoma and C-8161 human melanoma tumor cell lines.

Influence of the temperature and type of salt on the phase equilibrium of peg 1500 + potassium phosphate and peg 1500 + sodium citrate aqueous two-phase systems

The present work analyzed the effect of the temperature and type of salt on the phase equilibrium of aqueous two-phase systems (ATPS) formed by poly (ethylene glycol) (PEG) 1500 + potassium phosphate, from (278.15 to 318.15) K, and PEG 1500 + sodium citrate, from (278.15 to 298.15) K. The rise of the temperature normally increased the slope of the tie line (STL). With respect to the influence of the type of salt, sodium citrate showed better capability to induce phase separation, when compared to potassium phosphate.

Aplicação de Zr/Ti-PILC no processo de adsorção de Cu(II), Co(II) e Ni(II) utilizando modelos físico-químicos de adsorção e termodinâmica do processo

The aim of this investigation is to study how Zr/Ti-PILC adsorbs metals. The physico-chemical proprieties of Zr/Ti-PILC have been optimized with pillarization processes and Cu(II), Ni(II) and Co(II) adsorption from aqueous solution has been carried out, with maximum adsorption values of 8.85, 8.30 and 7.78 x10-1 mmol g-1, respectively. The Langmuir, Freundlich and Temkin adsorption isotherm models have been applied to fit the experimental data with a linear regression process. The energetic effect caused by metal interaction was determined through calorimetric titration at the solid-liquid interface and gave a net thermal effect that enabled the calculation of the exothermic values and the equilibrium constant.

Sampling in chemical analysis

The uncertainty of any analytical determination depends on analysis and sampling. Uncertainty arising from sampling is usually not controlled and methods for its evaluation are still little known. Pierre Gy’s sampling theory is currently the most complete theory about samplingwhich also takes the design of the sampling equipment into account. Guides dealing with the practical issues of sampling also exist, published by international organizations such as EURACHEM, IUPAC (International Union of Pure and Applied Chemistry) and ISO (International Organization for Standardization). In this work Gy’s sampling theory was applied to several cases, including the analysis of chromite concentration estimated on SEM (Scanning Electron Microscope) images and estimation of the total uncertainty of a drug dissolution procedure. The results clearly show that Gy’s sampling theory can be utilized in both of the above-mentioned cases and that the uncertainties achieved are reliable. Variographic experiments introduced in Gy’s sampling theory are beneficially applied in analyzing the uncertainty of auto-correlated data sets such as industrial process data and environmental discharges. The periodic behaviour of these kinds of processes can be observed by variographic analysis as well as with fast Fourier transformation and auto-correlation functions. With variographic analysis, the uncertainties are estimated as a function of the sampling interval. This is advantageous when environmental data or process data are analyzed as it can be easily estimated how the sampling interval is affecting the overall uncertainty. If the sampling frequency is too high, unnecessary resources will be used. On the other hand, if a frequency is too low, the uncertainty of the determination may be unacceptably high. Variographic methods can also be utilized to estimate the uncertainty of spectral data produced by modern instruments. Since spectral data are multivariate, methods such as Principal Component Analysis (PCA) are needed when the data are analyzed. Optimization of a sampling plan increases the reliability of the analytical process which might at the end have beneficial effects on the economics of chemical analysis,

Chelating Adsorbents in Purification of Hydrometallurgical Solutions

In this thesis, equilibrium and dynamic sorption properties of weakly basic chelating adsorbents were studied to explain removal of copper, nickel from a concentrated zinc sulfate solution in a hydrometallurgical process. Silica-supported chelating composites containing either branched poly(ethyleneimine) (BPEI) or 2-(aminomethyl)pyridine (AMP) as a functional group were used. The adsorbents are commercially available from Purity Systems Inc, USA as WP-1® and CuWRAM®, respectively. The fundamental interactions between the adsorbents, sulfuric acid and metal sulfates were studied in detail and the results were used to find the best conditions for removal of copper and nickel from an authentic ZnSO4 process solution. In particular, the effect of acid concentration and temperature on the separation efficiency was considered. Both experimental and modeling aspectswere covered in all cases. Metal sorption is considerably affected by the chemical properties of the studied adsorbents and by the separation conditions. In the case of WP-1, acid affinity is so high that column separation of copper, nickel and zinc has to be done using the adsorbent in base-form. On the other hand, the basicity of CuWRAM is significantly lower and protonated adsorbent can be used. Increasing temperature decreases the basicity and the metals affinity of both adsorbents, but the uptake capacities remain practically unchanged. Moreover, increasing temperature substantially enhances intra-particle mass transport and decreases viscosities thus allowing significantly higher feed flow rates in the fixed-bed separation. The copper selectivity of both adsorbents is very high even in the presence of a 250-fold excess of zinc. However, because of the basicity of WP-1, metal precipitation is a serious problem and therefore only CuWRAM is suitable for the practical industrial application. The optimum temperature for copper removal appears to be around 60 oC and an alternative solution purification method is proposed. The Ni/Zn selectivity of both WP-1 and CuWRAM is insufficient for removal of the very small amounts of nickel present in the concentrated ZnSO4 solution.

I2: uma molécula didática

Iodine vapor is a very suitable substance to learn about molecular energy levels and transitions, and to introduce spectroscopic techniques. As a diatomic molecule its spectra are relatively simple and allow straightforward treatment of the data leading to the potential energy curves and to quantum mechanics concepts. The overtone bands, in the resonance Raman scattering, and the band progressions, in the electronic spectra, play an important role in the calculation of the Morse potential curves for the fundamental and excited electronic state. A weaker chemical bond in the electronic excited state, compared to the fundamental state, is evidenced by the increase in the equilibrium interatomic distance. The resonance Raman scattering of I2 is highlighted due to its importance for obtaining the anharmonicity constant in the fundamental electronic state.

Passeig per l’invisible: itinerari químic per la ciutat de Girona = A walk through the invisible: a chemical journey through Girona

The presented itinerary covers eleven sites of the city of Girona that have been chosen for their interest from a chemical point of view. Girona is a city with chemistry, and this journey allowed student to see that chemistry is present everywhere, even in everyday life and not only in classrooms and laboratories. This approach aims to motivate students to discover something that had been invisible

Aplicação de adsorção para remover amônia de efluentes suinícolas pré-tratados

The aim of this work is to evaluate the use of natural zeolites to remove the NH4+ that remains in effluents from swine facilities which were submitted to physico-chemical and biological treatments. Experiments were made in batch made adding 5% (w/w) of adsorbent (0.6-1.3 and 3.0-8.0 mm) to synthetic and real swine facilities effluents. The results show that ammonium removal is influenced by adsorbent particle size and the presence of other ions in the effluent. The adsorption equilibrium was described by Langmuir as well as Freundlich isotherms and the kinetic data fitted well a pseudo-second order model.

Chemical composition and antimicrobial activity of the essential oil of Hyptis pectinata (l.) Poit.

Essential oil was extracted from leaves of Hyptis pectinata using hydrodistillation, and its composition determined using GC-FID and GC-MS. Chemical analysis showed that there was a predominance of sesquiterpenes, of which β-caryophyllene (18.34%), caryophyllene oxide (18.00%) and calamusenone (24.68%) were measured for the first time in the genus Hyptis. Twenty-one compounds were identified, and calamusenone was isolated using preparative thin layer chromatography with a silica gel plate (60 PF254). The minimal inhibitory concentration (MIC) and minimal microbicidal concentration (MMC) were determined for various pathogenic microorganisms. H. pectinata oil was most effective against Gram (+) bacteria and yeasts.

Chemical composition and analgesic activity of the leaves and branches of Marlierea tomentosa Camb.

This paper describes the isolation of five phytoconstituents from Marlierea tomentosa. The triterpenes α-amyrin (1) and β-amyrin (2), and the flavonoids quercitrin (3) and isoquercetin (4), were isolated from the leaves. The branches afforded the triterpene arjunolic acid (5). The antinociceptive activity of crude extract, fractions and compound 5 were tested using the writhing and formalin tests in mice. The crude extract, some fractions, particularly dichloromethane and butanol (leaves), ethyl acetate (branches) and arjunolic acid (5) (81.2% inhibition) were more active against the writhing test than the two reference drugs, acetylsalicylic acid and indomethacin.

Constituintes químicos do caule de Senna reticulata Willd. (Leguminoseae): Chemical constituents isolated from the wood of Senna reticulata Willd.

The phytochemical investigation of the wood extracts of Senna reticulata (Leguminoseae) yielded six anthraquinones: chrysophanol, physcion, aloe-emodin, 1,3,8-trihydroxyanthraquinone, 3-methoxy-1,6,8-trihydroxyanthraquinone, emodin and the chrysophanol-10,10' bianthrone. The triterpenes a and b-amirin, the steroids b-sitosterol and stigmasterol as well as the flavonoid kaempferol were also identified. The structures were established by spectral analysis, including two-dimensional NMR techniques. It is the first report of 1,3,8-trihydroxyanthraquinone and 3-methoxy-1,6,8-trihydroxyanthraquinone in higher plants.

Avaliação da pós-graduação da área de química na CAPES e a internacionalização das revistas da Sociedade Brasileira de Química: Journal of the Brazilian Chemical Society e Química Nova

This paper discusses of the use of the Impact Factor in the evaluation of chemistry graduate courses by CAPES and the internationalization of the Journal of the Brazilian Chemical Society and Química Nova.