Integração de modelos espaciais e temporais para predições de níveis freáticos extremos

O objetivo deste trabalho foi avaliar cenários de níveis freáticos extremos, em bacia hidrográfica, por meio de métodos de análise espacial de dados geográficos. Avaliou-se a dinâmica espaço‑temporal dos recursos hídricos subterrâneos em área de afloramento do Sistema Aquífero Guarani. As alturas do lençol freático foram estimadas por meio do monitoramento de níveis em 23 piezômetros e da modelagem das séries temporais disponíveis de abril de 2004 a abril de 2011. Para a geração de cenários espaciais, foram utilizadas técnicas geoestatísticas que incorporaram informações auxiliares relativas a padrões geomorfológicos da bacia, por meio de modelo digital de terreno. Esse procedimento melhorou as estimativas, em razão da alta correlação entre altura do lençol e elevação, e agregou sentido físico às predições. Os cenários apresentaram diferenças quanto aos níveis considerados extremos - muito profundos ou muito superficiais - e podem subsidiar o planejamento, o uso eficiente da água e a gestão sustentável dos recursos hídricos na bacia.

Efeitos de absorventes de umidade e de aditivos químicos e microbianos sobre o valor nutritivo, o perfil fermentativo e as perdas em silagens de capim-marandu

The objective of this trial was to evaluate the nutritional value, fermentation profile and dry matter losses of Palisadegrass silages ensiled with either dried citrus pulp, soybean hulls, chemical or microbial additives. The trial was carried out in a completely randomized experimental design and in a factorial arrangement (3 x 5), with three dry matter levels (wet forage or forage ensiled with pelleted citrus pulp or pelleted soybean hulls) and five additives (without or with the presence of bacterial inoculants or the addition of: sodium benzoate, formic acid in the concentration of 62% or 44%), totalizing 15 treatments and 60 experimental silos. The variables analyzed were: nutritional value, losses due to gases and effluents, and dry matter recovery. The use of dried citrus pulp or soybean hulls at the ensiling time increased the dry matter content (29.4 and 28,9%) and decreased the effluent production (4.1 and 3.8 kg/t of fresh matter), also providing fermentable substrate to microorganisms, resulting in increased fermentation coefficient and digestibility of silages. The use of formic acid resulted in silages with higher digestibility and increased water-soluble carbohydrates and crude protein content. This additive was also effective in reducing the losses due to gases and, as a result, increased the total dry matter recovery. The treatment containing homolactic bacteria showed similar trend of increasing the digestibility and reducing the losses due to gases. The use of sodium benzoate was less effective in altering the fermentation pattern of tropical silages. The nutritional value and total dry matter losses of silages ensiled without additives can be considered satisfactory. However, wet forage ensiled with dried citrus pulp and, mainly, with soybeans hulls showed the best results. Treatments containing formic acid had a beneficial effect on the fermentation profile of tropical grass silages.

História da missão dos padres capuchinhos na ilha do Maranhão e suas circumvisinhaças

O autor passou quatro meses no Maranhão e em 1614 editou a obra em francês. A presente tradução brasileira, ainda que seja a primeira, é considerada imperfeita, na visão de Rubens Borba de Moraes. O texto, porém, é considerado um clássico da etnografia brasileira e uma importante contribuição acerca do domínio francês no Maranhão.

Decorative tiles between Brazil and Europe: the case of the Santa Catharina factory

Abstract It was in the first decade of the twentieth century that the first white china Factory was implemented in Brazil. Fruit of the association between the Sao Paulo Aristocracy and the Italian Romeo Ranzini, this factory was responsible for producing significant amounts of crockery in industrial moulds in sao Paulo, Brazil. It was also the first factory to produce decorative tiles that would be part of the architecture of the public buildings built between 1919 and 1922 in Commemoration of the Centennial of the Brazilian Independence. Known as The Santa Catharina Factory, this factory was inaugurated in 1913 with the participation of Italian immigrants and German technologies for the development of its first manufacturing activities. As a result of a number of economic, political and social matters that started in the previous century in the city of Sao Paulo, The Santa Catharina factory played an important role in industrial development as regards the production of national white china and was used as a model for the construction of new ceramic factories in Sao Paulo. After acquired by Matarazzo industries in 1927, had closed their activities in 1937. This research is based on the identification and analysis of the first tiles produced in Brazil by the Santa Catharina Factory, which were part of the architectural decorations of the buildings built in Sao Paulo to the celebration of the Centennial of the Brazilian Independence. Designed by Victor Dubugras, The Largo da Memoria (located in the city of Sao Paulo) and the buildings located in the "Paths of the Sea" road marked the beginning of Brazilian industrialization and the emergence of Neocolonial Movement in architecture of Sao Paulo. Studies of the first national patterns of decorative tiles approach a subject poorly researched by experts in tiled studies in Brazil, although in this case these tiles have represented not only an important milestone in the national industrialization, but also have demarcated the significant changes in architectural and decorative practices in the country in the early twentieth century; RESUMÈ: C'est durant la premiere decennie du XXe siecle que la premiere usine de porcelaine blanche fut implant& au Bresil. Elle fut le fruit de l'association entre l'aristocratie de Sao Paulo et l'italien Romeo Ranzini. L'usine produisait une quantite signifiante de porcelaine sur le territoire industriel de Sao Paulo. Ce fut egalement la premiere usine a produire des carreaux decoratifs qui sont aujourd'hui visibles dans l'architecture des batiments publics construit entre 1919 et 1922, pour la commemoration du centenaire de l'independance bresilienne. Connue sous le nom de Santa Catharina, cette usine fut inaugure en 1912. Elle fut construite par des émigrés Italiens, et utilisa pour la technologie allemande pour so production. En tant que resultat d'un certain nombre de questions economiques, politiques et sociales qui ont &butes durant le siecle precedent dans la ville de Sao Paulo, l'usine Santa Catharina a joue un role important dans le developpement industriel de la production de porcelaine blanche nationale et a ete utilise comme modele pour la construction de nouvelles usines de ceramique a Sao Paulo. Apres avoir ete achete par l'industrie Matarazzo en 1927, elle cessa ses activites en 1937. Cette recherche est basee sur l'identification et l'analyse des premiers carreaux decoratifs fabriques au Bresil par l'usine Santa Catharina, qui etait une partie des decorations architecturales des batiments construits a Sao Paulo pour la celebration du centenaire de l'Independance Bresilienne. Connue par Victor Dubugras, le "Largo da Memoria" (situe dans la ville de Sao Paulo), et les batiments situes sur le "Path of the Sea", ont marque le debut de l'industrialisation bresilienne et l'emergence d'un mouvement neocolonialiste dans l'architecture de Sao Paolo. L'etude des premiers modeles nationaux de carreaux decoratifs est un sujet peut etudie par les experts bresiliens, bien qu'ils furent un jalon importante pour l'industrialisation nationale. Its ont egalement entrains des changements importants dans les pratiques architecturales, et decoratives au sein du pays au XXe siecle. Mots-cles: Ceramique - carreaux decoratifs — L'usine Santa Catharina, Bresil - Production de carreaux; RIASSUNTO: Nel primo decennio del Novecento vide luce la prima fabbrica di ceramica di porcellana in Brasile. Frutto dell'associazione tra l'aristocrazia Paulista e l'italiano Romeo Ranzini, questa fabbrica fu responsabile della produzione di notevoli quantita di ceramica di porcellana mediante stampi industriali nella citta di San Paolo, Brasile. Fu anche la prima fabbrica a produrre azulejos che avrebbero poi fatto parte dell'architettura degli edifici pubblici costruiti tra it 1919 ed it 1922, per la commemorazione del Centenario dell'indipendenza Brasiliana. Conosciuta come Fabbrica di Santa Catharina, questa fu inaugurata nel 1913, con la partecipazione di immigrati italiani e con l'impiego di tecnologie tedesche per lo sviluppo delle sue prime attivita produttive. Risultato di una serie di cambiamenti economici, politici e sociali, che ebbero inizio nel secolo precedente nella citta di San Paolo, la Fabbrica di Santa Catharina svolse un ruolo importante nello sviluppo industriale per quanto riguarda la produzione di ceramica di porcellana nazionale e fu adottata come modello per la costruzione di nuove fabbriche a San Paolo. Successivamente, fu acquisita dalle industrie Matarazzo nel 1927, vedendo poi chiudersi le sue attivita nel 1937. Questa ricerca si basa sull'identificazione e l'analisi dei primi azulejos prodotti in Brasile dalla Fabbrica di Santa Catharina che fecero parte delle decorazioni architettoniche degli edifici costruiti a San Paolo per la commemorazione del Centenario dell'indipendenza Brasiliana. Progettati da Victor Dubugras, it Largo da Mem(Via (situato nella citta di San Paolo) e gli edifici che si trovano nei Caminhos do Mar marcarono l'inizio dell'industrializzazione brasiliana e la nascita del Movimento Neocolonial dell'architettura Paulista. Gli studi dei primi modelli di azulejos nazionali affrontano un argomento poco studiato dagli esperti in azulejaria in Brasile, nonostante rappresentino un importante avvenimento dell'industrializzazione nazionale, ma segnano anche i cambiamenti di significative pratiche architettoniche e decorative nel Paese nel primo Novecento. Parole chiave: Ceramica - porcellana - La fabbrica di Santa Catharina - Produzione di ceramica .

Gestão territorial e geografia dos transportes : o processo de concessão do Aeroporto Internacional de Brasília

Dissertação (mestrado)—Universidade de Brasília, Departamento de Geografia, Programa de Pós-Graduação em Geografia, 2016.

Desenvolvimento de pastas de cimento flexíveis para poços de petróleo submetidos à injeção de vapor utilizando látex do tipo SBR

Novel cementing materials formulations containing flexible polymeric admixtures have been studied aiming at improving the mechanical behavior of oil well cement slurries submitted to steam injection. However, research activities in this sector are still under development. The steam injected directly into the well causes casing dilation, which after a reduction in temperature, tends to return to its original dimensions, resulting in crack formation and hydraulic isolation loss of the well, which will result in shortening of well life. In this scenario, the objective of the present study was to evaluate the mechanical behavior of Portland-based slurries containing SBR latex, applied in oil well cementing of wells submitted to steam injection. Were formulated slurries with densities of 1.797 g/cm3 (15.0 lb/Gal) and 1.869 g/cm3 (15.6 lb/Gal), containing admixtures with a latex concentration of 0; 66.88; 133.76; 200.64 and 267.52 L/m3 (0, 0.5, 1.0, 1.5 and 2.0 gpc). Tests including rheology, fluid loss control, thickening time, API compressive strength and splitting tensile strength, beyond steam injection simulation. Microstrutural characteristics of the slurries were also performed (XRD, TG, FTIR and SEM). The results showed that increasing the polymer concentration increased in the rheological properties and fluid loss, and a decrease in the elasticity modulus of the cement slurries. The results obtained showed that the slurries can be applied in cementing operations of oil wells submitted to steam injection.

Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Formulação de grautes leves para a cimentação de poços de petróleo onshore

Grautes are dry mixes with hydraulic characteristics widely used in construction. This material comprises cement, mineral additives and dosed in accordance with the desired properties. The use of grautes in cementing oil wells potentially increases the precision in the composition of the mixture, since it is requires only the addition of the mixing water before its pumping. Such benefit may be availed in cementing wells since the formulations grautes meet the temperature and pressure characteristics typical of wells. The objective of this study is to evaluate the effect of adding different percentages of industrial minerals properties of light grautes for onshore oil wells. For the formulation of the employees were grautes light industrial minerals and waste minerals abundant in the Northeast, in addiction to Portland cement and chemical additives Special class. Grautes were formulated with densities between 1.55 g/cm3 (13.0 lb/gal) and 1.68 g/cm3 (14 lb/gal). Tests results showed that grautes with higher density in the range studied meet the specifications for cementation of shallow wells onshore. The compositions lighter can also be adjusted for applying the material in the cementation of oil wells

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Benefícios da integração lavoura-pecuária sobre a qualidade física do solo visando à sustentabilidade da produção de soja no nordeste matogrossense.

O objetivo desse trabalho foi avaliar o efeito de forrageiras tropicais em sistema de integração lavoura-pecuária sobre a qualidade física do solo, na região nordeste do Estado do Mato Grosso.

Effect of bleaching agents containing fluoride or calcium on enamel microhardness, roughness and permeability

Aim: To evaluate the effect of different in-office bleaching agents on the permeability, roughness and surface microhardness of human enamel. Methods: For evaluation of roughness and microhardness, 40 hemi-faces of 20 premolars were subjected to initial roughness (Ra parameter) and microhardness (VHN) measurements. Thirty-two premolar’s crowns were used for permeability test. Then, all specimens were randomly divided into four groups: C - without bleaching (control), HP35 - bleaching with 35% hydrogen peroxide (HP), HPF38 - 38% HP+fluoride, HPC35 - 35% HP+calcium. Final roughness (FR) and microhardness (FM) measurements were evaluated. For permeability, the 32 crowns were immersed in 1% sodium hypochlorite (20 min) and silver nitrate solutions (2 h) and subjected to developing solution under fluorescent light (16 h). Three sections from the crowns were analyzed in light microscope (100x) to evaluate the scores of permeability: Score 0 - no tracer agent penetration; Score 1 - less than half the thickness of enamel penetration; Score 2 - tracer agent reaching half the enamel thickness; Score 3 - entire enamel depth penetration, without reaching dentin and Score 4 - tracer agent reaching dentin. For roughness and microhardness evaluation were used one-way ANOVA and Dunnet post-test for independent samples, and t test for paired samples. For permeability, the data were analyzed by Kruskal Wallis and Dunn tests. Results: A significantly higher permeability and surface roughness were observed in groups HP35, HPF38 and HPC35 compared to the C group, as well as decreased microhardness (p<0.05). Conclusions: All bleaching agents increased permeability and surface roughness, and decreased microhardness of human enamel; thus, the addition of fluoride or calcium was not beneficial.

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Adição de resíduo cerâmico em pastas geopoliméricas para cimentação de poços de petróleo

The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic