Promoter effects in the polymerisation of a mixed hydrocarbon feed with silica-supported BF3

The activity of a silica-supported BF3–methanol solid acid catalyst in the cationic polymerisation of an industrial aromatic C9 feedstock has been investigated. Reuse has been achieved under continuous conditions. Titration of the catalyst acid sites with triethylphosphine oxide (TEPO) in conjunction with 31P MAS NMR shows the catalyst to have two types of acid sites. Further analysis with 2,6 di-tert-butyl-4-methylpyridine (DBMP) has revealed the majority of these acid sites to be Brønsted in nature. The role of α-methylstyrene in promoting resin polymerisation via chain transfer is proposed.

CuII chain compound showing a ferromagnetic coupling through triple N1,N2-1,2,4-triazole bridges

[Cu(hyetrz)3](CF3SO3)2·H2O [hyetrz = 4-(2′-hydroxyethyl)-1,2,4-triazole] represents the first structurally characterised ferromagnetically coupled CuII chain compound containing triple N1,N2-1,2,4-triazole bridges. catena-[μ-Tris{4-(2′-hydroxyethyl)-1,2,4-triazole-N1,N2}copper(II)] bis(trifluoromethanesulfonate) hydrate (C14H23F6S2O10CuN9) crystallises in the triclinic space group Pl, a = 13.54(3), b = 14.37(3), c = 15.61(4) Å, α = 95.9(1), β = 104.9(1), γ = 106.5(1)°, V = 2763(11) Å3, Z = 4 (CuII units). The CuII ions are linked by triple N1,N2-1,2,4-triazole bridges yielding an alternating chain with Cu1−Cu2 = 3.8842(4) Å and Cu2−Cu3 = 3.9354(4) Å. Analysis of the magnetic data according to a high-temperature series expansion gives a J value of +1.45(3) cm−1. The nature and the magnitude of the ferromagnetic exchange have been discussed on the basis of the structural features. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2003).

Synthesis and characterization of silica-supported L-Lysine-based dendritic branches

Two series of novel modified silicas have been prepared in which individual dendritic branches have been attached to aminopropylsilica using standard peptide coupling methodology. The dendritic branches are composed of enantiomerically pure l-lysine building blocks, and hence, the modified silicas have the potential to act as chiral stationary phases in chromatography. In one series of modified silicas, the surface of the dendritic branch consists of Boc carbamate groups, whereas the other has benzoyl amide surface groups. Different coupling reagents have been investigated in order to maximize the loading onto the solid phase. The new supported dendritic materials have been fully characterized with properties of the bulk material determined by elemental analysis, 13C NMR, and IR spectroscopy, whereas XPS provides important information about the surface of the modified silica exposed to the incident X-rays, the key region in which potential chromatographic performance of these materials will take place. Although the bulk analyses indicate that loading of the dendritic branch onto silica decreases with increasing dendritic generation (and consequently steric bulk), XPS indicates that the optimum surface coverage is actually obtained at the second generation of dendritic growth.

Sharp Bounds on the Number of Resonances for Symmertic Systems II. Non-Compactly Supported Perturbations

We extend the results in [5] to non-compactly supported perturbations for a class of symmetric first order systems.

Highly selective hydrogenation of furfural over supported Pt nanoparticles under mild conditions

The selective liquid phase hydrogenation of furfural to furfuryl alcohol over Pt nanoparticles supported on SiO2, ZnO, γ-Al2O3, CeO2 is reported under extremely mild conditions. Ambient hydrogen pressure, and temperatures as low as 50 °C are shown sufficient to drive furfural hydrogenation with high conversion and >99% selectivity to furfuryl alcohol. Strong support and solvent dependencies are observed, with methanol and n-butanol proving excellent solvents for promoting high furfuryl alcohol yields over uniformly dispersed 4 nm Pt nanoparticles over MgO, CeO2 and γ-Al2O3. In contrast, non-polar solvents conferred poor furfural conversion, while ethanol favored acetal by-product formation. Furfural selective hydrogenation can be tuned through controlling the oxide support, reaction solvent and temperature.

Building bridges: the third sector responding locally to diversity

This paper focuses on a hitherto unstudied segment of the broad 'third sector': organisations and groupings that aim to build bridges (that is, increase interpersonal contacts) between people of different faiths and/or ethnic groups. We draw on the findings of an empirical study, conducted in three diverse urban areas of England, of community-level projects with bridge building as an explicit aim. We describe the characteristics of bridge-building activities and the challenges they face; both the organisational challenges and those that arise from the nature of bridge building itself. We conclude by exploring the implications of our findings for an understanding of the third sector generally and for the potential role of the sector in responding to our diverse society.

A Didactic Model of Computer Supported Education in Higher Mathematics

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2016

Catalytic supercritical water gasification of plastics with supported RuO2:a potential solution to hydrocarbons-water pollution problem

Here we report on a potential catalytic process for efficient clean-up of plastic pollution in waters, such as the Great Pacific Garbage Patch (CPGP). Detailed catalytic mechanisms of RuO2 during supercritical water gasification of common polyolefin plastics including low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP) and polystyrene (PP), have been investigated in a batch reactor at 450 °C, 60 min. All four plastics gave very high carbon gasification efficiencies (CGE) and hydrogen gasification efficiencies (HGE). Methane was the highest gas component, with a yield of up to 37 mol kg−1LDPE using the 20 wt% RuO2 catalyst. Evaluation of the gas yields, CGE and HGE revealed that the conversion of PS involved thermal degradation, steam reforming and methanation; whereas hydrogenolysis was a possible additional mechanism during the conversion of aliphatic plastics. The process has the benefits of producing a clean-pressurized methane-rich fuel gas as well as cleaning up hydrocarbons-polluted waters.

Effect of Cu and Sn promotion on the catalytic deoxygenation of model and algal lipids to fuel-like hydrocarbons over supported Ni catalysts

The ability of Cu and Sn to promote the performance of a 20% Ni/Al2O3 catalyst in the deoxygenation of lipids to fuel-like hydrocarbons was investigated using model triglyceride and fatty acid feeds, as well as algal lipids. In the semi-batch deoxygenation of tristearin at 260 °C a pronounced promotional effect was observed, a 20% Ni-5% Cu/Al2O3 catalyst affording both higher conversion (97%) and selectivity to C10-C17 alkanes (99%) in comparison with unpromoted 20% Ni/Al2O3 (27% conversion and 87% selectivity to C10-C17). In the same reaction at 350 °C, a 20% Ni-1% Sn/Al2O3 catalyst afforded the best results, giving yields of C10-C17 and C17 of 97% and 55%, respectively, which contrasts with the corresponding values of 87 and 21% obtained over 20% Ni/Al2O3. Equally encouraging results were obtained in the semi-batch deoxygenation of stearic acid at 300 °C, in which the 20% Ni-5% Cu/Al2O3 catalyst afforded the highest yields of C10-C17 and C17. Experiments were also conducted at 260 °C in a fixed bed reactor using triolein − a model unsaturated triglyceride − as the feed. While both 20% Ni/Al2O3 and 20% Ni-5% Cu/Al2O3 achieved quantitative yields of diesel-like hydrocarbons at all reaction times sampled, the Cu-promoted catalyst exhibited higher selectivity to longer chain hydrocarbons, a phenomenon which was also observed in experiments involving algal lipids as the feed. Characterization of fresh and spent catalysts indicates that Cu enhances the reducibility of Ni and suppresses both cracking reactions and coke-induced deactivation.

Base-free, one-pot chemocatalytic conversion of glycerol to methyl lactate using supported gold catalysts

We report an efficient one-pot conversion of glycerol (GLY) to methyl lactate (MLACT) in methanol in good yields (73 % at 95 % GLY conversion) by using Au nanoparticles on commercially available ultra-stable zeolite-Y (USY) as the catalyst (160 °C, air, 47 bar pressure, 0.25 M GLY, GLY-to-Au mol ratio of 1407, 10 h). The best results were obtained with zeolite USY-600, a catalyst that has both Lewis and Brønsted sites. This methodology provides a direct chemo-catalytic route for the synthesis of MLACT from GLY. MLACT is stable under the reaction conditions, and the Au/USY catalyst was recycled without a decrease in the activity and selectivity. From glycerol to green building blocks and solvents! An efficient, base-free conversion of glycerol to methyl lactate in methanol is reported, achieving good yields (73 % at 95 % glycerol conversion) using Au/ultra-stable zeolite-Y (USY) as the catalyst and environmentally benign oxygen as the oxidant by combining two separate reaction steps efficiently in a one pot procedure. The Au/USY catalyst can be recycled without a decrease in the activity and selectivity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Strongly localized moving discrete dissipative breather-solitons in Kerr nonlinear media supported by intrinsic gain

We investigate the mobility of nonlinear localized modes in a generalized discrete Ginzburg-Landau-type model, describing a one-dimensional waveguide array in an active Kerr medium with intrinsic, saturable gain and damping. It is shown that exponentially localized, traveling discrete dissipative breather-solitons may exist as stable attractors supported only by intrinsic properties of the medium, i.e., in the absence of any external field or symmetry-breaking perturbations. Through an interplay by the gain and damping effects, the moving soliton may overcome the Peierls-Nabarro barrier, present in the corresponding conservative system, by self-induced time-periodic oscillations of its power (norm) and energy (Hamiltonian), yielding exponential decays to zero with different rates in the forward and backward directions. In certain parameter windows, bistability appears between fast modes with small oscillations and slower, large-oscillation modes. The velocities and the oscillation periods are typically related by lattice commensurability and exhibit period-doubling bifurcations to chaotically "walking" modes under parameter variations. If the model is augmented by intersite Kerr nonlinearity, thereby reducing the Peierls-Nabarro barrier of the conservative system, the existence regime for moving solitons increases considerably, and a richer scenario appears including Hopf bifurcations to incommensurately moving solutions and phase-locking intervals. Stable moving breathers also survive in the presence of weak disorder. © 2014 American Physical Society.

Tudásmenedzsmentet támogató szervezeti megoldások (Knowledge management supported by organizational solutions)

A tudás a vállalatok egyre fontosabb erőforrásává vált, ezért tudatos megoldásokkal kell törekedni a szervezeti tudásban rejlő lehetőségek hatékony kihasználására. A tudás kezelésére irányuló tevékenységeket mind technológiai-informatikai, mind HR-, mind pedig szervezeti megoldásokkal lehet támogatni. Jelen cikkben a vállalatok szervezeti megoldásait elemzi a szerző: rámutat a szervezeti struktúrák, a szervezeti kultúra, a vezetői megközelítések (leadership) szerepére, valamint a kommunikáció különböző formáinak lehetőségeire. ______ Knowledge management activities became important part of knowledge oriented organisations, like software development companies. These activities can be supported by technological and organisational solutions. This paper concentrates on the organisational support factors of knowledge management activities in the software development industries, and examines the role of organisational design, structures, processes, communication and management support, while highlights the challenges.

Self-esteem and job satisfaction of adults with mild mental retardation in sheltered workshops and supported employment programs

A sample of 200 adults with mild mental retardation were assessed on overall job satisfaction and self-esteem using the Vocational Program Evaluation Profile and the Coopersmith Self-esteem Inventory. The subjects worked either in a sheltered workshop or in a supported employment setting. Results indicated that there was a significant relationship between self-esteem and job satisfaction for both groups of subjects. In addition, subjects who worked in supported employment reported significantly higher levels of job satisfaction also. There was also an interaction between place of residence and place of employment when looking at self-esteem; those who live in a semi-independent home and work in supported employment reported the highest levels of self-esteem. These results are discussed in terms of the social validity of supported-employment for persons with mild mental retardation. ^

Examining a proposed job retention model for adult workers with mental retardation in supported employment

This quantitative study investigated the predictive relationships and interaction between factors such as work-related social behaviors (WRSB), self-determination (SD), person-job congruency (PJC), job performance (JP), job satisfaction (JS), and job retention (JR). A convenience sample of 100 working adults with MR were selected from supported employment agencies. Data were collected using a survey test battery of standardized instruments. The hypotheses were analyzed using three multiple regression analyses to identify significant relationships. Beta weights and hierarchical regression analysis determined the percentage of the predictor variables contribution to the total variance of the criterion variables, JR, JP, and JS. ^ The findings highlight the importance of self-determination skills in predicting job retention, satisfaction, and performance for employees with MR. Consistent with the literature and hypothesized model, there was a predictive relationship between SD, JS and JR. Furthermore, SD and PJC were predictors of JP. SD and JR were predictors of JS. Interestingly, the results indicated no significant relationship between JR and JP, or between JP and JS, or between PJC and JS. This suggests that there is a limited fit between the hypothesized model and the study's findings. However, the theoretical contribution made by this study is that self-determination is a particularly relevant predictor of important work outcomes including JR, JP, and JS. This finding is consistent with Deci's (1992) Self-Determination Theory and Wehmeyer's (1996) argument that SD skills in individuals with disabilities have important consequences for the success in transitioning from school to adult and work life. This study provides job retention strategies that offer rehabilitation and HR professionals a useful structure for understanding and implementing job retention interventions for people with MR. ^ The study concluded that workers with mental retardation who had more self-determination skills were employed longer, more satisfied, and better performers on the job. Also, individuals whose jobs were matched to their interests and abilities (person-job congruency) were better at self-determination skills. ^