Fishery potential along the Indian coastal waters between Porbandar and Ratnagiri

As part of the ongoing marine pollution monitoring programme the coastal stretch between Porbandar and Ratnagiri was considered to assess the fishery potential. Regular experimental trawling was done off Porbandar, Veraval, Diu, Hazira, Daman, Bassein, Bombay, Murud and Ratnagiri at a depth range of 5-25 m during 1988 to 1992. The catch rate varied from 1.2 to 225 kg/h (av.20.3 kg/h). Zonewise maximum catch (av.56.8 kg/h) was observed off Ratnagiri followed by off Porbandar (av.30.1 kg/h), off Bombay (av.23.9 kg/h) and off Murud (av.19.8 kg/h). The area between Hazira and Daman was poor in fish catch. In general, the catch rate showed a fluctuating trend during the period of observation. Among the hundred species identified from the collections the most common species were Coilia dussumieri, Johnius glaucus, Scoliodon laticaudus, Lepturacanthus savala, Harpadon nehereus, Sardinella longiceps, Pampus sp. and Congresox sp. The community structure and species assemblage at different zones are discussed in detail.

Potential tuning of porous silicon luminescence

Electrochemical investigations were conducted of the effect of potential on the luminescence of porous silico (PS). The use of liquid contacts allows the potential to be controlled during studies of the photoluminescence (PL) and electroluminescence (EI). The PL and EL of PS samples prepared from n-type substrates is considered. To obtain luminescence from such PS it is necessary to generate holes in the valence band. This is achieved by either photoexcitation or an electrochemical process involving the reduction of persulfate. This paper describes the investigations of the effect of potential on the PL and EL of PS. A mechanism of 'potential tuning' based on electron occupancy and Auger quenching is then proposed.

A Preliminary survey of 21 Ceylon lakes. 2. Limnology and fish production potential

Some morphometric, physical and chemical conditions of 21 lakes in Ceylon are described. The values for the organic matter in the plankton and for the dry weight of bottom fauna in the lakes have been calculated. These values have been utilised to evaluate the potential fish production figures for the lakes. Fishing trials were made in each lake. Suggestions regarding mesh sizes and time of fishing are put forward.

Wake, shock and potential field interactions in a 1.5 stage turbine: Part I: Vane-rotor and rotor-vane interaction

The composition of the time-resolved surface pressure field around a high-pressure rotor blade caused by the presence of neighboring blade rows was studied, with the individual effects of wake, shock and potential field interaction being determined. Two test geometries were considered: first, a high-pressure turbine stage coupled with a swan-necked diffuser exit duct; secondly, the same high-pressure stage but with a vane located in the downstream duct. Both tests were carried out at engine-representative Mach and Reynolds numbers. By comparing the results to time-resolved computational predictions of the flowfield, the accuracy with which the computation predicts blade interaction was determined. It was found that in addition to upstream vane-rotor and rotor-downstream vane interactions, a new interaction mechanism was found resulting from the interaction between the downstream vane's potential field and the upstream vane's trailing edge potential field and shock.

Wake, shock and potential field interactions in a 1.5 stage turbine: Part II: Vane-vane interaction and discussion of results

The composition of the time-resolved surface pressure field around a high-pressure rotor blade caused by the presence of neighboring blade rows was studied, with the individual effects of wake, shock and potential field interaction being determined. Two test geometries were considered: first, a high-pressure turbine stage coupled with a swan-necked diffuser exit duct; secondly, the same high-pressure stage but with a vane located in the downstream duct. Both tests were carried out at engine-representative Mach and Reynolds numbers. By comparing the results to time-resolved computational predictions of the flowfield, the accuracy with which the computation predicts blade interaction was determined. Evidence was obtained that for a large downstream vane, the flow conditions in the rotor passage, at any instant in time, are close to being steady state.

The history and fishery potential of Kisoro Minor Lakes part two: Preliminary survey of Lakes Mutanda and Mulehe fisheries 

The fisheries of Lakes Mutanda and Mulehe during 1998/9 were mainly at subsistence scale and only few fishers operated at irregular intervals. The commercial catch records between 1963 to 1999 showed that Lake Mulehe was landing more fish than Lake Mutanda despite the fact that Lake Mutanda (26.4 km2) was bigger than Lake Mulehe (4.11 cm2). The constant decline of catches was due to irregular restocking and applying low stocking densities of fry. However, restocking should consider using species that withstand low temperature (15-240C) in the district. These include Oreochromis niloticus (Nile tilapia), Macropterus salmoides (Black bass), and Cyprinus carpio (Common carp). Most of these species have either disappeared or declined to very low levels. Due to lack of commercial fish species for harvest, the fishers by 1998/9 resorted to harvesting the haplochromines, Clarias carsoni and edible frogs (Xenopus kigesiensis) as alternative resources. Experimental studies have shown the need and techniques to enhance fish production on these two lakes.

Selected trace metal concentration in bottom water and sediments of Kyoga basin lakes, and its potential to aquatic pollution

Although other research studies on areas such as the physical-chemical, nutrients and phytoplankton status of Lake Kyoga systems have been given a lot of attention (e.g. Mungoma 1988 and NaFIRRI 2006), efforts to determine the pollution status of this system, especially by heavy metals as one of the worldwide emerging environmental problems, is still limited. Many trace metals are regarded as serious pollutants of aquatic ecosystems because of their persistence, toxicity and ability to be incorporated into food chains (Mwamburi J., and Nathan O.F., 1997). Given the rapid human population growth and the associated economic activities both within the rural and urban areas in Uganda, such fish production systems are becoming very prone to various kinds of pollution including that by heavy metals. Anthropogenic factors such deforestation, use of chemicals and dumping of metallic products, spillages of fuels from outboard engines and many others and or natural processes involving atmospheric deposition by wind or rain, surface run-offs and streams flows from the catchment introduces heavy metals into the lake environment,.

Hybrid potential flow-streamtube method for modelling VAWT-flowfield interactions

When designing vertical-axis wind turbines (VAWTs) for deployment in the urban environment, it is desirable to have a low-cost computational model that allows for modelling the coupled interaction of the turbine with the flowfleld. Such a method is presented in this paper, It combines a variation of the multiple streamtube model with a potential method to model flowfleld interactions. A method referred to as "streamtube surgery" is used to couple the influence of the flowfleld with the performance model of the VAWT. This tool is used to explore the instantaneous and cycle-averaged flowflelds of VAWTs. It can also be used to evaluate the influence on performance of multiple VAWTs in dense arrays or to quantify blockage effects of a VAWT in wind tunnel testing.

The potential of mixed culture of freshwater giant prawn Macrobrachium rosenbergii de Man and tiger shrimp Penaeus monodon Fab. at Khulna region, Bangladesh

The freshwater giant prawn (golda), Macrobrachium rosenbergii and tiger shrimp (bagda), Penaeus monodon were stocked together with or without fin fishes at different stocking rates in semi-saline waters at Khulna region and their growth, survival, yield and costreturn analysis were made. Survival rate of golda and bagda ranged from 23.0 to 36.8% and 8.2 to 24%, respectively. The both species were significantly affected by their own stocking density. The average final weight of golda and bagda ranged from 62.4 to 73.3 g and 32.0 to 66.4 g. The bivariate analysis of average final weight of both golda and bagda revealed that golda positively and bagda negatively influenced by the total stocking density. However, the results of the individual sizes of both golda and bagda showed an increase in the proportions of smaller animals and a decrease in the proportion of larger ones with increasing stocking rates. The harvesting weights of all animals in the experimental ghers were in marketable sizes although their prices varied with the individual size. The total production comprised of both golda and bagda ranged from 514.6 to 952.8 kg ha·1, over a culture period of 10 months. Return on investment ranged from 51.0 to 125.7%.

Influence of stocking density on the culture potential of freshwater catfish Pangasius pangasius in pond

Influence of stocking density on the production of freshwater catfish Pangasius pangasius with formulated feed in ponds was studied. The fish fry were collected from the Meghna river near Chandpur which is a natural breeding ground of this fish. Three stocking densities chosen during this experiment were 5000, 8000 and 11000 fry/ha with an initial weight of 42.57 ±2.51 g. The formulated feed was prepared in the laboratory which contained 45% fish meal, 30% mustard oil cake, 15% wheat bran and 10% rice bran to supply 40.48% protein in feed. The growth of P. pangasius in terms of net weight gain was 409.49, 266.49 and 236.37 g at the 5000/ha, 8000/ha and 11000/ha stocking densities respectively, which was statistically significant (p<0.05). High food conversion ratio (FCR) was also observed during this research study which ranged between 7.06 to 7.72. A production of 2.6 tons/ha at the stocking density of 11000/ha; 2.13 tons/ha at the stocking density of 8000/ha and 2.04 tons/ha at the stocking density of 5000/ha was obtained, while the growth of individual fish at the end of experiment was in opposite order. The result of this experiment indicates that stocking density has significant influence on the culture potential of freshwater catfish P.pangasius.

Molecular characterization of Trimeresurus stejnegeri venom L-amino acid oxidase with potential anti-HIV activity

A novel L-amino acid oxidase, named TSV-LAO, has been purified and cloned from the snake Trimeresurus stejnegeri. Fifty percentage cytotoxic concentrations (CC50) of TSV-LAO on C8166 cells were 24 and 390 nM in the absence or presence of catalase (400nM), respectively. However, at concentrations that showed little effect on cell viability, TSV-LAO displayed dose dependent inhibition on HIV-1 infection and replication. The antiviral selectivity indexes (CC50/EC50) were 16 and 6, respectively, corresponding to the measurements of syncytium formation and HIV-1 p24 antigen expression. Interestingly, the presence of catalase resulted in an increase of its antiviral selectivity to 52 and 38. Under the same conditions, no anti-HIV-1 activity was observed by exogenous addition of H2O2. The complete amino acid sequence of TSV-LAO, as deduced from its cDNA, exhibits a high degree of sequence identity with other snake venom LAOs. (C) 2003 Elsevier Inc. All rights reserved.

Cloning of bradykinin precursor cDNAs from skin of Bombina maxima reveals novel bombinakinin M antagonists and a bradykinin potential peptide

Bombinakinin M (DLPKINRKGP-bradykinin) is a bradykinin-related peptide purified from skin secretions of the frog Bombina maxima. As previously reported, its biosynthesis is characterized by a tandem repeats with various copy numbers of the peptide and sometimes co-expressed with other structure-function distinguishable peptides. At present study, two novel cDNAs encoding bombinakinin M and its variants were cloned from a cDNA library from the skin of the frog. The encoded two precursor proteins are common in that each contains three repeats of a novel 16-amino acid peptide unit and one copy of kinestatin at their N- and C-terminal parts, respectively. They differ in that the first precursor contains two copies of bombinakinin M and the second one contains one copy of a novel bombinakinin M variant. Bombinakinin M was found to elicit concentration-dependent contractile effects on guinea pig ileum, with an EC50 value of 4 nM that is four times higher than that of bradykinin (1 nM). Interestingly, the synthetic peptide (DYTIRTRLH-amide), as deduced from the 16-amino acid peptide repeats in the newly cloned cDNAs, possessed weak inhibitory activity on the contractile effects of bombinakinin M, but not on that of bradykinin. Furthermore, the newly identified bombinakinin M variant (DLSKMSFLHG-Ile(1)-bradykinin), did not show contractile activity on guinea pig ileum, but showed potentiation effect on the myotropic activity of bradykinin. In a molar raito of 1:58, it augmented the activity of bradykinin up to two-fold. (C) 2004 Elsevier B.V. All rights reserved.

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

Towards a process framework for assessing the potential value of technologies

Current technology valuation literature predominantly focuses on explaining the merits and implications of specific tools, but little research is available that takes a contextual process perspective. The aim of this paper is to further develop an integrative process framework that supports the structuring of the valuation process and the more systematic choice of valuation techniques for new technologies. The paper starts by reviewing key concepts and issues that surround the assessment of technology investments and the evidence of what companies use. Many factors need to be brought into the appraisal process, reflecting technological and market conditions. While there is usually a desire to reduce the assessment to a financial value, it is also widely appreciated that there is long term strategic value in securing a technological lead, which is difficult, or even inappropriate, to assess in purely financial terms. The multiple factors involved in the evaluation activity are identified with respect to the changing nature of the appraisal process as the technology matures and the implications for associated tools. The result of the literature review is a process framework which provides a conceptual basis for integrating valuation techniques. This framework is then populated with the results of industrial case studies on technology valuation to allow conclusions on its applicability to be drawn. © 2011 IEEE.