Shape control of laminated panels using piezoelectric actuators

This paper presents a finite element formulation based on the classical laminated plate theory for laminated structures with integrated piezoelectric layers or patches, acting as actuators.The finite element model is a single layer trinaguular nonconforming plate/shell element with 18 degrees of fredom for the generalized displacements, and one electrical potential degree of freedom for each piezoelectric element elemenet layer or patch. An optimization of the patches position is perfomed to maximize the piezoelectric actuators efficiency as well as,the electric potential distribution is serach to reach the specified strusctura transverse displacement distribution is search to reach the specified structures trsnsverse displacement distribution (shape control). A gradient based algorithm is used for this purpose.Results are presented and discussed.

Simple brightness models with low-pass and Gabor filters

A syntactical brightness model based on a multiscale line and edge representation obtained by a set of anisotropic Gabor filters is quite complex (du Buf and Fischer, 1995 Optical Engineering 34 1900-1911). Although only tested in 1-D, it was shown to yield correct brightness effects for many patterns.

Estimating bottom properties with a vector sensor array during MakaiEx 2005

Nowadays, vector sensors which measure both acoustic pressure and particle velocity begin to be available in underwater acoustic systems, normally configured as vector sensor arrays (VSA). The spatial filtering capabilities of a VSA can be used, with advantage over traditional pressure only hydrophone arrays, for estimating acoustic field directionality as well as arrival times and spectral content, which could open up the possibility for its use in bottom properties' estimation. An additional motivation for this work is to test the possibility of using high frequency probe signals (say above 2 kHz) for reducing size and cost of actual sub bottom profilers and current geoacoustic inversion methods. This work studies the bottom related structure of the VSA acquired signals, regarding the emitted signal waveform, frequency band and source-receiver geometry in order to estimate bottom properties, specially bottom reflection coefficient characteristics. Such a system was used during the Makai 2005 experiment, off Kauai I., Hawai (USA) to receive precoded signals in a broad frequency band from 8 up to 14 kHz. The agreement between the observed and the modelled acoustic data is discussed and preliminary results on the bottom reflection estimation are presented.

Face normalization using multi-scale cortical keypoints

Empirical studies concerning face recognition suggest that faces may be stored in memory by a few canonical representations. Models of visual perception are based on image representations in cortical area V1 and beyond, which contain many cell layers for feature extractions. Simple, complex and end-stopped cells tuned to different spatial frequencies (scales) and/or orientations provide input for line, edge and keypoint detection. This yields a rich, multi-scale object representation that can be stored in memory in order to identify objects. The multi-scale, keypoint-based saliency maps for Focus-of-Attention can be explored to obtain face detection and normalization, after which face recognition can be achieved using the line/edge representation. In this paper, we focus only on face normalization, showing that multi-scale keypoints can be used to construct canonical representations of faces in memory.

Competências das entidades inspectoras ou organismos de inspecção de acordo com a norma NP EN 45 004

O regulamento técnico relativo ao projecto, construção, exploração e manutenção de redes de gás combustível canalizado tem sofrido algumas alterações ao longo dos últimos treze anos. Este facto está directamente relacionado com o projecto de introdução do gás natural (GN) no território nacional, considerado como uma das prioridades na política energética dos últimos governos. A área geográfica de concessão de serviço público de importação de gás natural e do seu transporte e fornecimento através da rede de alta pressão encontra-se actualmente alargada a todos os municípios do continente, por força da Portaria n.º 2/2001, de 2 de Janeiro.

Optimal dynamic control of laminated adaptive structures using a higher order model and a genetic algorithm

This paper deals with a finite element formulation based on the classical laminated plate theory, for active control of thin plate laminated structures with integrated piezoelectric layers, acting as sensors and actuators. The control is initialized through a previous optimization of the core of the laminated structure, in order to minimize the vibration amplitude. Also the optimization of the patches position is performed to maximize the piezoelectric actuator efficiency. The genetic algorithm is used for these purposes. The finite element model is a single layer triangular plate/shell element with 24 degrees of freedom for the generalized displacements, and one electrical potential degree of freedom for each piezoelectric element layer, which can be surface bonded or embedded on the laminate. To achieve a mechanism of active control of the structure dynamic response, a feedback control algorithm is used, coupling the sensor and active piezoelectric layers. To calculate the dynamic response of the laminated structures the Newmark method is considered. The model is applied in the solution of an illustrative case and the results are presented and discussed.

Cortical object segregation and categorization by multi-scale line and edge coding

In this paper we present an improved scheme for line and edge detection in cortical area V1, based on responses of simple and complex cells, truly multi-scale with no free parameters. We illustrate the multi-scale representation for visual reconstruction, and show how object segregation can be achieved with coarse-to-finescale groupings. A two-level object categorization scenario is tested in which pre-categorization is based on coarse scales only, and final categorization on coarse plus fine scales. Processing schemes are discussed in the framework of a complete cortical architecture.

Multi-scale keypoint hierarchy for Focus-of-Attention and object detection

Hypercolumns in area V1 contain frequency- and orientation-selective simple and complex cells for line (bar) and edge coding, plus end-stopped cells for key- point (vertex) detection. A single-scale (single-frequency) mathematical model of single and double end-stopped cells on the basis of Gabor filter responses was developed by Heitger et al. (1992 Vision Research 32 963-981). We developed an improved model by stabilising keypoint detection over neighbouring micro- scales.

Non-linear analysis of composite structures with integrated piezoelectric sensors and actuators

This paper deals with the geometrically non linear analysis of thin plate/shell laminated structures with embedded integrated piezoelectric actuors or sensors layers and/or patches.The model is based on the Kirchhoff classical laminated theory and can be applied to plate and shell adaptive structures with arbitrary shape, general mechanical and electrical loadings. the finite element model is a nonconforming single layer triangular plate/shell element with 18 degrees of fredom for the generalized displacements and one eçlectrical potential degree of freedom for each piezoelectric layer or patch. An updated Lagrangian formulation associated to Newton-Raphson technique is used to solve incrementally and iteratively the equilibrium equation.The model is applied in the solution of four illustrative cases, and the results are compared and discussedwith alternative solutions when available.

Métodos dos momentos

Os métodos utilizados na resolução de problemas, nos vários ramos da Engenharia ou ciências aplicadas, baseiam-se, actualmente, em uma de duas categorias: métodos analíticos e métodos numéricos. É preferível a utilização dos métodos analíticos, na resolução de equações ou outros modelos matemáticos, sempre que possível, uma vez que formamões gerais em vez de particularizadas, para além de uma maior informação.

Condition monitoring and diagnostics of power transformers

This paper addresses the subject of condition monitoring and diagnostics of power transformers. The main results of two reliability surveys, carried out under the auspices of CIGRE and IEEE in order to assemble objective data on the performance of transformers in service, are presented, providing useful information on the main causes of transformer failures, the most likely affected components and the related outages times. A survey of the most important methods, actually in use, for condition monitoring and diagnostics of power transformers is also given, which stresses the need for the development of new diagnostic methods, that can be applied without taking the transformers out of service, and that can also provide a fault severity criteria, in particular for determining transformers windings integrity. Preliminary results, concerning the on-going research activity on the development of a new approach for inter-turn winding fault diagnosis in three-phase transformers, are also reported in the paper.

Modelação da qualidade microbiológica da água na Ria Formosa

Este estudo integra-se numa avaliação hidrodinâmica e monitorização microbiológica da qualidade da água da Ria Formosa. A monitorização foi implementada pela DRAOT Algarve com a colaboração da EST, da FCMA e do IST. A metodologia utilizada consiste na aplicação de um modelo matemático para simulação das variáveis hidrodinâmicas e da qualidade da água. Utilizam-se como traçadores os coliformes fecais (CF), considerados indicadores de contaminação fecal pelo Dec-Lei 236/98 de 1 de Agosto, relativo à qualidade de águas do litoral e salobras para fins aquícolas- águas conquícolas. As águas da ria são usadas para cultura de diversas espécies conquícolas de bivalves. Estes são organismos que filtram e retêm no seu interior material particulado existente em suspensão na água tais como os CF entre outros microorganismos presentes na água. Para avaliar a concentração de coliformes nos bivalves e gastrópodes foi desenvolvido um modelo que simula a bioacumulação desta propriedade por parte do bivalve. Da sua aplicação permite classificar a Ria em várias classes conforme o estabelecido no Dec. Lei nº 293/98 de 18 de Setembro.

A utilização de sistemas solares térmicos nas unidades hoteleiras de 3 estrelas do Algarve

A região do Algarve é uma das regiões da União Europeia com maior potencialidade no aproveitamento da energia solar nomeadamente através da utilização de sistemas solares térmicos para aquecimento de água. A tecnologia utilizada nestes sistemas é relativamente simples e bem conhecida mas infelizmente verifica-se que, por diversas razões, nem sempre é aplicada. A alternativa, é a utilização de sistemas de aquecimento de água que utilizam combustíveis fósseis, quer de forma directa, como por exemplo através da queima de um combustível (gasóleo, gás propano, etc), ou de forma indirecta, através da electricidade. A utilização de combustíveis fósseis esta na origem de um dos maiores problemas ambientais da nossa época, o aquecimento global. Além disso, dependendo do tipo de combustível e da

Looking through the eyes of the painter: from visual perception to non-photorealistic rendering

In this paper we present a brief overview of the processing in the primary visual cortex, the multi-scale line/edge and keypoint representations, and a model of brightness perception. This model, which is being extended from 1D to 2D, is based on a symbolic line and edge interpretation: lines are represented by scaled Gaussians and edges by scaled, Gaussian-windowed error functions. We show that this model, in combination with standard techniques from graphics, provides a very fertile basis for non-photorealistic image rendering.

A three-dimensional hydrodynamic model with generic vertical coordinate

A three-dimensional primitive equation model and its application to a tidal estuary is described. The model solves the primitive equations for incompressible fluids with Boussinesq and hydrostatic approximations. The discretization is based on the finite volume method and allows a general vertical coordinate. The computational code is implemented in such a way that different vertical coordinates can be used in different parts of the domain. The model was designed to be able to simulate the flow both in the open ocean and in coastal and estuarine zones and can be coupled in a simple way to ecological models. The model was implemented successfully in several estuarine and coastal areas. Results are show for the Sado estuary in Portugal to illustrate model accuracy and potential. Quantitative validation is based on field data (water levels and velocities) while qualitative verification is based on the analysis of secondary flows.