1000 resultados para Aproximación de superfícies


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this thesis, we study the application of spectral representations to the solution of problems in seismic exploration, the synthesis of fractal surfaces and the identification of correlations between one-dimensional signals. We apply a new approach, called Wavelet Coherency, to the study of stratigraphic correlation in well log signals, as an attempt to identify layers from the same geological formation, showing that the representation in wavelet space, with introduction of scale domain, can facilitate the process of comparing patterns in geophysical signals. We have introduced a new model for the generation of anisotropic fractional brownian surfaces based on curvelet transform, a new multiscale tool which can be seen as a generalization of the wavelet transform to include the direction component in multidimensional spaces. We have tested our model with a modified version of the Directional Average Method (DAM) to evaluate the anisotropy of fractional brownian surfaces. We also used the directional behavior of the curvelets to attack an important problem in seismic exploration: the atenuation of the ground roll, present in seismograms as a result of surface Rayleigh waves. The techniques employed are effective, leading to sparse representation of the signals, and, consequently, to good resolutions

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Among the therapeutic approaches that can be used to achieve this goal is the gait training on sloping surfaces, but there are few scientific findings that elucidate the results of this practice. OBJECTIVE: To evaluate the effects of training on sloping surfaces on the gait of subjects with chronic hemiparesis. MATERIALS AND METHODS: A controlled, randomized, blinded clinical trial was conducted. Concluded the study twenty-four subjects with age between 40 and 70 years (54,91±9,3). Their neurological function, functional independence, motor function and balance assessed, besides the gait evaluation through kinemetry. The subjects were allocated into two groups: control group (CG) underwent gait training on treadmill with partial body weight support (PBWS) without inclination; and the experimental group (EG) submitted to gait training on treadmill with PBWS and inclination of 10%. Twelve training sessions were performed. The paired t Student test and Wilcoxon test were used in statistical analysis to compare findings before and after training for each group, and the t student test for independent samples and Mann-Whitney.test were used to compare the to groups. RESULTS: After training within-group changes were observed on balance recovery, motor function and functionality, in both experimental conditions. The EG showed changes after training on speed, stride length, step length of paretic and non-paretic side, paretic single support, double support time and non-paretic swing time. The CG the differences were detected on double support, paretic single support and hip range of movement. The EG showed better results when compared to CG on the variables: speed (p=0,034), non-paretic single support (p=0,02) and paretic swing time (p=0,02). CONCLUSION: gait training on sloping surfaces represents a promising strategy for gait training of subjects with chronic hemiparesis since it is can influence a greater number of gait variables, when compared with gait training on flat surface

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present experiment used cell culture to analyze the adhesion capacity of mouse mesenchymal bone marrow cells and rat periodontal ligament to different titanium surfaces. Grade II ASTM F86 titanium discs 15mm in diameter and 1.5mm thick were used and received 2 distinct surface treatments (polished and cathodic cage plasma nitriding). The cells were isolated from the mouse bone marrow and rat periodontal ligament and cultured in α-MEM basic culture medium containing antibiotics and supplemented with 10% FBS and 5% CO2, for 72 hours at 37ºC in a humidified atmosphere. Subculture cells were cultured in a 24-well plate with a density of 1 x 104 cells per well. The titanium discs were distributed in accordance with the groups, including positive controls without titanium discs. After a 24-hour culture, the cells were counted in a Neubauer chamber. The results show that both the mouse mesenchymal bone marrow cells and rat periodontal ligament cells had better adhesion to the control surface. The number of bone marrow cells adhered to the polished Ti surface was not statistically significant when compared to the same type of cell adhered to the Ti surface treated by cathodic cage plasma nitriding. However a significant difference was found between the control and polished Ti groups. In relation to periodontal ligament cell adhesion, a significant difference was only found between the control and plasma-treated Ti surfaces. When comparing equal surfaces with different cells, no statistically significant difference was observed. We can therefore conclude that titanium is a good material for mesenchymal cell adhesion and that different material surface treatments can influence this process

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the last years, many scientific researches in implantology have been focused on alternatives that would provide higher speed and quality in the process of osseointegration. Different treatment methods can be used to modify the topographic and chemical properties of titanium surface in order to optimize the tissue-implant reactions by a positive tissue response. This study aimed to evaluate the adhesion and proliferation of mesenchymal cells from human periodontal ligament on two different titanium surfaces, using cell culture techniques. Grade II titanium discs received different surface treatments, forming two distinct groups: polished and cathodic cage plasma nitriding. Human periodontal ligament mesenchymal cells were cultured on titanium discs in 24-well cell culture plates, at a density of 2 x 104 cells per well, including wells with no discs as positive control. Data obtained by counting the cells that adhered to the titanium surfaces (polished group and cathodic cage group) and to the plastic surface (control group), in the 24, 48 and 72-hour periods after plating, were used to analyze cell adhesion and proliferation and to obtain the cell growing curve in the different groups. The data were submitted to nonparametric analysis and the differences between groups were compared by Kruskal-Wallis and Friedman statistical tests. No statistically significant differences were found in the cells counts between the groups (p>0.05). It was concluded that both treatments produced surfaces compatible with the adhesion and proliferation of human periodontal ligament mesenchymal cells

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to its high resolution, Ground Penetrating Radar (GPR) has been used to image subsurface sedimentary deposits. Because GPR and Seismic methods share some principles of image construction, the classic seismostratigraphic interpretation method has been also applied as an attempt to interpret GPR data. Nonetheless some advances in few particular contexts, the adaptations from seismic to GPR of seismostratigraphic tools and concepts unsuitable because the meaning given to the termination criteria in seismic stratigraphy do not represent the adequate geologic record in the GPR scale. Essentially, the open question relies in proposing a interpretation method for GPR data which allow not only relating product and sedimentary process in the GPR scale but also identifying or proposing depositional environments and correlating these results with the well known Sequence Stratigraphy cornerstones. The goal of this dissertation is to propose an interpretation methodology of GPR data able to perform this task at least for siliciclastic deposits. In order to do so, the proposed GPR interpretation method is based both on seismostratigraphic concepts and on the bounding surface hierarchy tool from Miall (1988). As consequence of this joint use, the results of GPR interpretation can be associated to the sedimentary facies in a genetic context, so that it is possible to: (i) individualize radar facies and correlate them to the sedimentary facies by using depositional models; (ii) characterize a given depositional system, and (iii) determine its stratigraphic framework highligthing how it evolved through geologic time. To illustrate its use the proposed methodology was applied in a GPR data set from Galos area which is part of the Galinhos spit, located in Rio Grande do Norte state, Northeastern Brazil. This spit presents high lateral sedimentary facies variation, containing in its sedimentary record from 4th to 6th cicles caused by high frequency sea level oscillation. The interpretation process was done throughout the following phases: (i) identification of a vertical facies succession, (ii) characterization of radar facies and its associated sedimentary products, (iii) recognition of the associated sedimentary process in a genetic context, and finally (iv) proposal of an evolutionay model for the Galinhos spit. This model proposes that the Galinhos spit is a barrier island constituted, from base to top, of the following sedimentary facies: tidal channel facies, tidal flat facies, shore facies, and aeolic facies (dunes). The tidal channel facies, in the base, is constituted of lateral accretion bars and filling deposits of the channels. The base facies is laterally truncated by the tidal flat facies. In the foreshore zone, the tidal flat facies is covered by the shore facies which is the register of a sea transgression. Finally, on the top of the stratigraphic column, aeolic dunes are deposited due to areal exposition caused by a sea regression

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo deste estudo foi comparar as decisões de tratamento restaurador de superfícies oclusais, sem cavitação, quando realizadas através dos aspectos clínicos e radiográficos, convencional e digitalizado. Foram examinados, 33 sítios das superfícies oclusais de 30 molares permanentes extraídos, com e sem pigmentação. O plano de tratamento para cada região foi realizado por 5 cirurgiões-dentistas, professores universitários, utilizando dois tipos de exames: exame visual de fotografias e radiografia interproximal convencional (IV + RXC); e exame visual de fotografias e radiografia digitalizada (IV + DIGORA). O padrão de validação para os planos de tratamento foi realizado através do aspecto histológico. A sensibilidade em determinar a não-necessidade de tratamento restaurador foi, em média, tanto para a IV + RXC quanto para a IV + DIGORA, de 0,23. A especificidade foi, em média, de 0,83 e 0,86, para a IV + RXC e IV + DIGORA, respectivamente. Quando comparou-se os planos de tratamento intra-examinadores, não foi encontrada diferença estatisticamente significante à nível de 5%. Baseado nestes dados, pode-se concluir que os métodos radiográficos, convencional e digitalizado, não demonstraram diferenças na efetividade da determinação do plano de tratamento de superfícies oclusais sem cavitação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Materiais restauradores que liberam íons flúor e/ou promovem adesão à estrutura dental têm sido relacionados com a inibição do desenvolvimento de lesões de cárie adjacentes às restaurações. A hipótese testada neste estudo foi a de que o uso de resina composta/sistema adesivo tem efeito cariostático semelhante a um material adesivo que libera íons flúor - cimento de ionômero de vidro - sobre a superfície radicular adjacente às restaurações. Foram utilizadas 20 raízes de terceiros molares humanos extraídos, embutidas em resina de poliestireno e planificadas. Cavidades padronizadas foram preparadas e restauradas aleatoriamente com (a) Chelon-Fil (Espe) ou (b) Z100/SingleBond (3M). Valores iniciais (KHNi) de microdureza superficial Knoop da dentina foram obtidos a 100, 200 e 300 mim da margem oclusal das restaurações. Uma área de 2,0 mm ao redor da restauração foi delimitada e submetida à indução de cárie artificial. Obtiveram-se, então, os valores finais (KHNf) de microdureza, nas mesmas condições e localizações da leitura inicial. As diferenças entre KHNi e KHNf foram consideradas para a análise estatística. As medianas de KHNi - KHNf nas distâncias de 100, 200 e 300 mim foram para (a): -3,8; -0,3; -1,0; e para (b): 3,3; 2,5; 1,7. O teste de Kruskal-Wallis não evidenciou diferença significativa entre as distâncias dentro de cada grupo. Às distâncias de 200 e 300 mim, não houve diferença significativa entre os materiais avaliados. À distância de 100 mim, (a) diferiu significativamente de (b) (p < 0,05). Sob as condições deste estudo, o cimento de ionômero de vidro apresentou maior potencial cariostático que a resina composta com sistema adesivo dentinário.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

INTRODUÇÃO: O Running Anaerobic Sprint Test (RAST) tem sido considerado um teste válido para avaliação anaeróbia. Entretanto, como a superfície e o calçado podem afetar alguns parâmetros mensurados durante o exercício, isso pode modificar os parâmetros do RAST. OBJETIVO: Comparar as variáveis do RAST mensuradas utilizando chuteiras na grama (RAST CG) e tênis na pista (RAST TP). MÉTODOS: Oito jogadores de futebol (da categoria sub-17) participaram do estudo. Os participantes realizaram dois RAST (intervalo > 24 h). O RAST consistiu em seis corridas máximas de 35m com 10s de intervalo passivo entre cada corrida. O tempo de cada esforço foi registrado para determinação da potência pico (PP), potência média (PM) e índice de fadiga (IF). Após o sexto esforço, amostras sanguíneas foram coletadas para determinação da lactacidemia ([Lac]). RESULTADOS: Durante o RAST TP, a PP (763,1 ± 87,2 W) e PM (621,6 ± 68,1 W) foram significativamente superiores às PP e PM mensuradas em RAST CG (PP = 667,3 ± 67,0 W e PM = 555,9 ± 74,7 W), enquanto que as [Lac] observadas em RAST TP (7,3 ± 1,8 mmol.L-1) foram significativamente inferiores às mensuradas em RAST CG (9,9 ± 3,2 mmol.L-1). No entanto, o IF não foi significativamente diferente (RAST TP = 32,5 ± 8,3%; RAST CG = 34,1 ± 6,6%). Significativas correlações foram observadas entre as PM (r = 0,90) e as [Lac] (r = 0,72). CONCLUSÃO: Podemos concluir que as variáveis do RAST são influenciadas pela superfície e calçado utilizados, com valores superiores observados em RAST TP.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho teve por objetivo avaliar modelo matemático para estimar a radiação solar global diária sobre superfícies com diferentes exposições e declividades, no período de março de 2002 a março de 2003. A pesquisa foi desenvolvida em uma estrutura denominada Bacia Hidrográfica Experimental do Departamento de Engenharia Rural da UNESP, Câmpus de Jaboticabal - SP. Nessa estrutura, foram utilizadas superfícies caracterizadas como H, 10N, 10S, 20N, 20S, 10E, 10W, 20E e 20W. O sensor utilizado para medir a radiação solar global incidente nas superfícies estudadas foi um piranômetro da marca Kipp & Zonnen, modelo CM3. Para calcular a radiação solar incidente nas superfícies estudadas, foi utilizado o modelo de Kondratyev. As análises dos resultados foram feitas para o período diário, utilizando-se de análise de regressão e considerando o modelo linear (y = ax + b), na qual a variável dependente foi a radiação global medida (K¯M) e a radiação global calculada (K¯C) foi a variável independente. Os resultados deste estudo mostram que o modelo apresentou bons resultados para estimar a radiação nas superfícies H, 10N, 10S, 10E, 10W, 20E e 20W. Utilizando-se de dados de dias com céu límpido, foram obtidos os seguintes resultados: no inverno, o modelo foi preciso para estimar a radiação solar na superfície 20N, e apresentou resultados aceitáveis para estimar a radiação solar na superfície 20S.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudou-se a lixiviação (leaching) de potássio em folhas destacadas de várias plantas através das superfícies adaxial e abaxial sob luz e obscuridade. Os resultados indicam que no lado mais rico em estomatos a lixiviação é maior tanto na luz como na obscuridade, embora as diferenças sejam bem mais acentuadas na obscuridade.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Variations in soil attributes occur based on relief forms and parent material. The objective of this research was to study the influences of geomorphic surfaces on the spatial distribution of soil attributes in a sugarcane cultivation area. First, 530,67 hectares were mapped by using a Global Positioning System. Then, a Digital Elevation Model was developed and geomorphic surfaces were identified and delimited, according to topographic and stratigraphic criteria based on detailed field investigations. Soil samples were collected every 7 ha, at 0.0-0.25 m and 0.80-1.00 m depths, totalizing 134 samples. Texture, Ca, K, Mg, SB, CEC, V%, pH, and OMS analyses were carried out as well as descriptive statistics and geostatistics analysis. It was concluded that the geostatistic techniques and digital elevation model helped to notice that soil attributes presented limits close to the geomorphic surfaces ones.