Wide area control through aggregation of power systems

This thesis was a step forward in improving the stability of power systems by applying new control and modelling techniques. The developed methods use the data obtained from voltage angle measurement devices which are synchronized with GPS signals to stabilize the system and avoid system-wide blackouts in the event of severe faults. New approaches were developed in this research for identifying and estimating reduced dynamic system models using phasor measurement units. The main goal of this research is achieved by integrating the developed methods to obtain a feasible wide-area control system for stabilizing the power systems.

Humans, ‘things’ and space : costing hospital infection control interventions

Background: Previous attempts at costing infection control programmes have tended to focus on accounting costs rather than economic costs. For studies using economic costs, estimates tend to be quite crude and probably underestimate the true cost. One of the largest costs of any intervention is staff time, but this cost is difficult to quantify and has been largely ignored in previous attempts. Aim: To design and evaluate the costs of hospital-based infection control interventions or programmes. This article also discusses several issues to consider when costing interventions, and suggests strategies for overcoming these issues. Methods: Previous literature and techniques in both health economics and psychology are reviewed and synthesized. Findings: This article provides a set of generic, transferable costing guidelines. Key principles such as definition of study scope and focus on large costs, as well as pitfalls (e.g. overconfidence and uncertainty), are discussed. Conclusion: These new guidelines can be used by hospital staff and other researchers to cost their infection control programmes and interventions more accurately.

Improving statistical analysis of matched case-control studies

Matched case–control research designs can be useful because matching can increase power due to reduced variability between subjects. However, inappropriate statistical analysis of matched data could result in a change in the strength of association between the dependent and independent variables or a change in the significance of the findings. We sought to ascertain whether matched case–control studies published in the nursing literature utilized appropriate statistical analyses. Of 41 articles identified that met the inclusion criteria, 31 (76%) used an inappropriate statistical test for comparing data derived from case subjects and their matched controls. In response to this finding, we developed an algorithm to support decision-making regarding statistical tests for matched case–control studies.

Risk factors for impaired respiratory function during nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory : a matched case-control study

Background: Side effects of the medications used for procedural sedation and analgesia in the cardiac catheterisation laboratory are known to cause impaired respiratory function. Impaired respiratory function poses considerable risk to patient safety as it can lead to inadequate oxygenation. Having knowledge about the conditions that predict impaired respiratory function prior to the procedure would enable nurses to identify at-risk patients and selectively implement intensive respiratory monitoring. This would reduce the possibility of inadequate oxygenation occurring. Aim: To identify pre-procedure risk factors for impaired respiratory function during nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory. Design: Retrospective matched case–control. Methods: 21 cases of impaired respiratory function were identified and matched to 113 controls from a consecutive cohort of patients over 18 years of age. Conditional logistic regression was used to identify risk factors for impaired respiratory function. Results: With each additional indicator of acute illness, case patients were nearly two times more likely than their controls to experience impaired respiratory function (OR 1.78; 95% CI 1.19–2.67; p = 0.005). Indicators of acute illness included emergency admission, being transferred from a critical care unit for the procedure or requiring respiratory or haemodynamic support in the lead up to the procedure. Conclusion: Several factors that predict the likelihood of impaired respiratory function were identified. The results from this study could be used to inform prospective studies investigating the effectiveness of interventions for impaired respiratory function during nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory.

Alternative models of cardiac rehabilitation : a systematic review

The traditional hospital-based model of cardiac rehabilitation faces substantial challenges, such as cost and accessibility. These challenges have led to the development of alternative models of cardiac rehabilitation in recent years. The aim of this study was to identify and critique evidence for the effectiveness of these alternative models. A total of 22 databases were searched to identify quantitative studies or systematic reviews of quantitative studies regarding the effectiveness of alternative models of cardiac rehabilitation. Included studies were appraised using a Critical Appraisal Skills Programme tool and the National Health and Medical Research Council's designations for Level of Evidence. The 83 included articles described interventions in the following broad categories of alternative models of care: multifactorial individualized telehealth, internet based, telehealth focused on exercise, telehealth focused on recovery, community- or home-based, and complementary therapies. Multifactorial individualized telehealth and community- or home-based cardiac rehabilitation are effective alternative models of cardiac rehabilitation, as they have produced similar reductions in cardiovascular disease risk factors compared with hospital-based programmes. While further research is required to address the paucity of data available regarding the effectiveness of alternative models of cardiac rehabilitation in rural, remote, and culturally and linguistically diverse populations, our review indicates there is no need to rely on hospital-based strategies alone to deliver effective cardiac rehabilitation. Local healthcare systems should strive to integrate alternative models of cardiac rehabilitation, such as brief telehealth interventions tailored to individual's risk factor profiles as well as community- or home-based programmes, in order to ensure there are choices available for patients that best fit their needs, risk factor profile, and preferences.

Aircraft collision avoidance using spherical visual predictive control and single point features

This paper presents practical vision-based collision avoidance for objects approximating a single point feature. Using a spherical camera model, a visual predictive control scheme guides the aircraft around the object along a conical spiral trajectory. Visibility, state and control constraints are considered explicitly in the controller design by combining image and vehicle dynamics in the process model, and solving the nonlinear optimization problem over the resulting state space. Importantly, range is not required. Instead, the principles of conical spiral motion are used to design an objective function that simultaneously guides the aircraft along the avoidance trajectory, whilst providing an indication of the appropriate point to stop the spiral behaviour. Our approach is aimed at providing a potential solution to the See and Avoid problem for unmanned aircraft and is demonstrated through a series.

Control of dc capacitor voltages in diode-clamped multilevel inverter using bidirectional buck-boost choppers

The dc capacitors voltage unbalancing is the main technical drawback of a diode-clamped multilevel inverter (DCMLI), with more than three levels. A voltage-balancing circuit based on buck–boost chopper connected to the dc link of DCMLI is a reliable and robust solution to this problem. This study presents four different schemes for controlling the chopper circuit to achieve the capacitor voltages equalisation. These can be broadly categorised as single-pulse, multi-pulse and hysteresis band current control schemes. The single-pulse scheme does not involve faster switching actions but need the chopper devices to be rated for higher current. The chopper devices current rating can be kept limited by using the multi-pulse scheme but it involves faster switching actions and slower response. The hysteresis band current control scheme offers faster dynamics, lower current rating of the chopper devices and can nullify the initial voltage imbalance as well. However, it involves much faster switching actions which may not be feasible for some of its applications. Therefore depending on the system requirements and ratings, one of these schemes may be used. The performance and validity of the proposed schemes are confirmed through both simulation and experimental investigations on a prototype five-level diode-clamped inverter.

Smart robust resources control in LV network to deal with voltage rise issue

Often voltage rise along low voltage (LV) networks limits their capacity to accommodate more renewable energy (RE) sources. This paper proposes a robust and effective approach to coordinate customers' resources and control voltage rise in LV networks, where photovoltaics (PVs) are considered as the RE sources. The proposed coordination algorithm includes both localized and distributed control strategies. The localized strategy determines the value of PV inverter active and reactive power, while the distributed strategy coordinates customers' energy storage units (ESUs). To verify the effectiveness of proposed approach, a typical residential LV network is used and simulated in the PSCAD-EMTC platform.

CPAP apparatus : an inexpensive alternative

Objective: To describe an effective and inexpensive CPAP-mask apparatus for use in the emergency department. Conclusion: CPAP is an effective tool in the treatment of acute pulmonary oedema in the emergency department. The mask apparatus described is an inexpensive alternative to the commercially produced machines.

Universal active and reactive power control of electronically interfaced distributed generation sources in virtual power plants operating in gridconnected and islanding modes

The control paradigms of the distributed generation (DG) sources in the smart grid are realised by either utilising virtual power plant (VPP) or by employing MicroGrid structures. Both VPP and MicroGrid are presented with the problem of control of power flow between their comprising DG sources. This study depicts this issue for VPP and proposes a novel and improved universal active and reactive power flow controllers for three-phase pulse width modulated voltage source inverters (PWM-VSI) operating in the VPP environment. The proposed controller takes into account all cases of R-X relationship, thus allowing it to function in systems operating at high, medium (MV) and low-voltage (LV) levels. Also proposed control scheme for the first time in an inverter control takes into account the capacitance of the transmission line which is an important factor to accurately represent medium length transmission lines. This allows the proposed control scheme to be applied in VPP structures, where DG sources can operate at MV LV levels over a short/medium length transmission line. The authors also conducted small signal stability analysis of the proposed controller and compared it against the small signal study of the existing controllers.

Mediating conflict and control : practice challenges for nurses working in palliative care

A work-based professional development program was offered to a group of registered nurses working in palliative care. The goal of the program was to improve skills in psychosocial care (Yates et al., 1996). Participants were encouraged to reflect critically on their practice experience within a group setting. The focus of the group discussion and reflection were shared practice incidents. Each participant was given the opportunity to identify and describe an incident from their professional practice that presented a challenging issue within palliative nursing. This paper explores the themes of conflict and control, evident within the collection of fifteen practice incidents and discusses the nurses role as mediator. The concepts of patient advocacy and professional autonomy are challenged through the nurses experience of providing care within a hierarchical and bureaucratic health service. The outcome of reflection for the organization is most effective when shared experience and collective action (rather than individual practice) are the focus.

A multi-objective optimization approach for coordinating available transfer capability with risk control

In the electricity market environment, coordination of system reliability and economics of a power system is of great significance in determining the available transfer capability (ATC). In addition, the risks associated with uncertainties should be properly addressed in the ATC determination process for risk-benefit maximization. Against this background, it is necessary that the ATC be optimally allocated and utilized within relative security constraints. First of all, the non-sequential Monte Carlo stimulation is employed to derive the probability density distribution of ATC of designated areas incorporating uncertainty factors. Second, on the basis of that, a multi-objective optimization model is formulated to determine the multi-area ATC so as to maximize the risk-benefits. Then, the solution to the developed model is achieved by the fast non-dominated sorting (NSGA-II) algorithm, which could decrease the risk caused by uncertainties while coordinating the ATCs of different areas. Finally, the IEEE 118-bus test system is served for demonstrating the essential features of the developed model and employed algorithm.

A bondgraph approach to formation control using relative state measurements

In this paper we apply port-Hamiltonian theory with the bondgraph modelling approach to the problem of formation control using partial measurements of relative positions. We present a control design that drives a group of vehicles to a desired formation without requiring inter-vehicle communications or global position and velocity measurements to be available. Our generic approach is applicable to any form of relative measurement between vehicles, but we specifically consider the important cases of relative bearings and relative distances. In the case of bearings, our theory closely relates to the field of image-based visual servo (IBVS) control. We present simulation results to support the developed theory.

Feeding attitudes, practices and traditional dietary beliefs of Chinese mothers with young children in Australia : a mixed methods study

Background and Objectives Obesity and some dietary related diseases are emerging health problems among Chinese immigrants and their children in developed countries. These health problems are closely linked to eating habits, which are established in the early years of life. Young children’s eating habits are likely to persist into later childhood and youth. Family environment and parental feeding practices have a strong effect on young children’s eating habits. Little information is available on the early feeding practices of Chinese mothers in Australia. The aim of this study was to understand the dietary beliefs, feeding attitudes and practices of Chinese mothers with young children who were recent immigrants to Australia. Methods Using a sequential explanatory design, this mixed methods study consisted of two distinct phases. Phase 1 (quantitative): 254 Chinese immigrant mothers of children aged 12 to 59 months completed a cross-sectional survey. The psychometric properties and factor structure of a Chinese version of the Child Feeding Questionnaire (CFQ, by Birch et al. 2001) were assessed and used to measure specific maternal feeding attitudes and controlling feeding practices. Other questions were developed from the literature and used to explore maternal traditional dietary beliefs and feeding practices related to their beliefs, perceptions of picky eating in children and a range of socioeconomic and acculturation factors. Phase 2 (qualitative): 21 mothers took part in a follow-up telephone interview to assist in explaining and interpreting some significant findings obtained in the first phase. Results Chinese mothers held strong traditional dietary beliefs and fed their children according to these beliefs. However, children’s consumption of non-core foods was high. Both traditional Chinese and Australian style foods were consumed by their children. Confirmatory factor analysis revealed that the original 7-factor model of the CFQ provided an acceptable fit to the data with minor modification. However, an alternative model with eight constructs in which two items related to using food rewards were separated from the original restriction construct, not only provided an acceptable fit to the data, but also improved the conceptual clarity of the constructs. The latter model included 24 items loading onto the following eight constructs: restriction, pressure to eat, monitoring, use of food rewards, perceived responsibility, perception of own weight, perception of child’s weight, and concern about child becoming overweight. The internal consistency of the constructs was acceptable or desirable (Cronbach’s α = .60 - .93). Mothers reported low levels of concern about their child overeating or becoming overweight, but high levels of controlling feeding practices: restriction, monitoring, pressure to eat and use of food rewards. More than one quarter of mothers misinterpreted their child’s weight status (based on mothers’ self-reported data). In addition, mothers’ controlling feeding practices independently predicted half of the variance and explained 16% of the variance in child weight status: pressuring the child to eat was negatively associated with child weight status (β = -0.30, p < .01) and using food rewards was positively associated with child weight status (β = 0.20, p < .05) after adjusting for maternal and child covariates. Monitoring and restriction were not associated with child weight status. Mothers’ perceptions of their child’s weight were positively associated with child weight status (β = 0.33, p < .01). Moreover, mothers reported that they mostly decided what (65%) and how much (80%) food their child ate. Mothers who decided what food their child ate were more likely to monitor (β = -0.17, p < .05) and restrict (β = -0.17, p < .05) their child’s food consumption. Mothers who let their child decide how much food their child ate were less likely to pressure their child to eat (β = -0.38, p < .01) and use food rewards (β = -0.24, p < .01). Mothers’ perceptions of picky eating behaviour were positively associated with their use of pressure (β = 0.21, p < .01) and negatively associated with monitoring (β = -0.16, p < .05) and perceptions of their child’s weight status (β = -0.13, p < .05). Qualitative data showed that pressuring to eat, monitoring and restriction of the child’s food consumption were common practices among these mothers. However, mothers stated that their motivation for monitoring and restricting was to ensure the child’s general health. Mothers’ understandings of picky eating behaviour in their children were consistent with the literature and they reported multiple feeding strategies to deal with it. Conclusion Chinese immigrant mothers demonstrated strong traditional dietary beliefs, a low level of concern for child weight, misperceptions of child weight status, and a high overall level of control in child feeding in this study. The Chinese version of the CFQ, which consists of eight constructs and distinguishes between the constructs using food rewards and restriction, is an appropriate instrument to assess feeding attitudes and controlling feeding practices among Chinese immigrant mothers of young children in Australia. Mothers’ feeding attitudes and practices were associated with children’s weight status and mothers’ perceptions of picky eating behaviour in children after adjusting for a range of socio-demographic maternal and child characteristics. Monitoring and restriction of children’s food consumption according to food selection may be positive feeding practices, whereas pressuring to eat and using food rewards appeared to be negative feeding practices in this study. In addition, the results suggest that these young children have high exposure to energy-dense, nutrient-poor food. There is a need to develop and implement nutrition interventions to improve maternal feeding practices and the dietary quality among children of Chinese immigrant mothers in Australia.