Fabrication of carbon nanofiber by pyrolysis of freeze-dried cellulose nanofiber

The possibility of fabricating carbon nanofibers from cellulose nanofibers was investigated. Cellulose nanofiber of ~50 nm in diameter was produced using ball milling in an eco-friendly manner. The effect of the drying techniques of cellulose nanofibers on the morphology of carbon residue was studied. After pyrolysis of freeze-dried cellulose nanofibers below 600 °C, amorphous carbon fibers of ~20 nm in diameter were obtained. The pyrolysis of oven-dried precursors resulted in the loss of original fibrous structures. The different results arising from the two drying techniques are attributed to the difference in the spatial distance between cellulose nanofiber precursors.

Understanding the context of distance students : differences in on- and off-campus engagement with an online learning environment

 While a growing number of higher education institutions are providing online modes of study for both on- and off-campus students, there are very real differences in demography, technology experiences, reasons for study, etc. between on- and off-campus students, and research into engagement with online learning environments (OLEs) indicate differences in the way that on- and off-campus students interact with OLEs. In Australia, Deakin University is a major provider of distance and online education, and provides a case study of a higher education institution with a mature and large-scale OLE implementation providing support to both on- and off-campus students. Deakin Studies Online (DSO) is Deakin University’s OLE. Based on a representative sample of 1322 responses to the 2011 DSO evaluation survey, this paper presents a large-scale, up-to-date and fine-grained investigation of impact of mode of study on the student experience of using an OLE. It was found that the primary place of access to DSO for both groups was home, mobile access to DSO seems likely to be of growing importance to both groups, and there was no statistically significant difference in the mean satisfaction ratings between on- and off-campus students for virtually all DSO functions. Off-campus students gave significantly higher mean ratings of importance (though not satisfaction) to a range of DSO functions that could be viewed as ‘value adders’ by off-campus students, enhancing their overall learning experience. For more than half of the DSO functions surveyed, on-campus students reported statistically significant higher mean frequency of access than off-campus students. The finding that elements of the institutional OLE are not universally perceived and used the same way by all students groups challenges the value of standard, one-size-fits-all institutional policies and templates relating to the use of OLEs.

Determining motion components using the point distribution model

The Point Distribution Model (PDM) has proven effective in modelling variations in shape in sets of images, including those in which motion is involved such as body and hand tracking. This paper proposes an extension to the PDM through a re-parameterisation of the model which uses factors such as the angular velocity and distance travelled for sets of points on a moving shape. This then enables non-linear quantities such as acceleration and the average velocity of the body to be expressed in a linear model by the PDM. Results are shown for objects with known acceleration and deceleration components, these being a simulated pendulum modelled using simple harmonic motion and video sequences of a real pendulum in motion.

Number plate survey methodology for long-distance traffic flows

The lack of comprehensive data on transport operations is a long- standing problem in transport research. Information on road transport in particular has proved difficult to obtain. This Paper documents a study which was aimed at developing and testing a technique to estimate long-distance passenger and freight movements based on direct observation of vehicle movements.

The allometric relationship between mean fibre diameter of mohair and the fleece-free liveweight of Angora goats over their lifetime

As mean fibre diameter (MFD) is the primary determinant of mohair price we aimed to quantify the lifetime changes in mohair MFDas Angora goats aged and grew. Measurements were made over 12 shearing periods on a population of Angora goats representing the current range and diversity of genetic origins including South African, Texan and interbred admixtures of these and Australian sources. Records of sire, dam, birthweight, birth parity, liveweight, fleece growth and fleece quality were taken for does and castrated males (wethers) (n = 267 animals). Fleece-free liveweights (FFL_wt) were determined for each goat at shearing time by subtracting the greasy fleece weight from the liveweight recorded immediately before shearing. A restricted maximum likelihood growth curve model was developed for relating MFD to FFL_wt, age and other measurements.Asimple way of describing the results is:MFD= k (FFL_wt)b E; where k is a parameter that can vary in a systematic way with shearing(age), breed, weaning weight, sire, dam and individual; b is a parameter that is the same for nearly the whole study; and E are independent errors from a log-normal distribution. The analysis shows that ^b = 0.34, with s.e. (^b) = 0.021. Thus, mohair MFD was allometrically related to the cube root of FFLwt over the lifetime of Angora goats. However, the allometric proportionality constant differed in a systematic way with age at shearing, genetic strain, weaning weight, sire, dam and individual. For Texan-breed goats, MFD decreased as weaning weight increased (P = 0.00016). The findings indicate that management factors that affect liveweight and weaning weight have lifetime effects on mohair fibre diameter and therefore the value of mohair and the profitability of the mohair enterprise.

A predictive model of avian natal dispersal distance provides prior information for investigating response to landscape change

1. Informative Bayesian priors can improve the precision of estimates in ecological studies or estimate parameters for which little or no information is available. While Bayesian analyses are becoming more popular in ecology, the use of strongly informative priors remains rare, perhaps because examples of informative priors are not readily available in the published literature.

2. Dispersal distance is an important ecological parameter, but is difficult to measure and estimates are scarce. General models that provide informative prior estimates of dispersal distances will therefore be valuable.

3. Using a world-wide data set on birds, we develop a predictive model of median natal dispersal distance that includes body mass, wingspan, sex and feeding guild. This model predicts median dispersal distance well when using the fitted data and an independent test data set, explaining up to 53% of the variation.

4. Using this model, we predict a priori estimates of median dispersal distance for 57 woodland-dependent bird species in northern Victoria, Australia. These estimates are then used to investigate the relationship between dispersal ability and vulnerability to landscape-scale changes in habitat cover and fragmentation.

5. We find evidence that woodland bird species with poor predicted dispersal ability are more vulnerable to habitat fragmentation than those species with longer predicted dispersal distances, thus improving the understanding of this important phenomenon.

6. The value of constructing informative priors from existing information is also demonstrated. When used as informative priors for four example species, predicted dispersal distances reduced the 95% credible intervals of posterior estimates of dispersal distance by 8-19%. Further, should we have wished to collect information on avian dispersal distances and relate it to species' responses to habitat loss and fragmentation, data from 221 individuals across 57 species would have been required to obtain estimates with the same precision as those provided by the general model.

Experimental quantification of long distance dispersal potential of aquatic snails in the gut of migratory birds

Many plant seeds and invertebrates can survive passage through the digestive system of birds, which may lead to long distance dispersal (endozoochory) in case of prolonged retention by moving vectors. Endozoochorous dispersal by waterbirds has nowadays been documented for many aquatic plant seeds, algae and dormant life stages of aquatic invertebrates. Anecdotal information indicates that endozoochory is also possible for fully functional, active aquatic organisms, a phenomenon that we here address experimentally using aquatic snails. We fed four species of aquatic snails to mallards (Anas platyrhynchos), and monitored snail retrieval and survival over time. One of the snail species tested was found to survive passage through the digestive tract of mallards as fully functional adults. Hydrobia (Peringia) ulvae survived up to five hours in the digestive tract. This suggests a maximum potential transport distance of up to 300 km may be possible if these snails are taken by flying birds, although the actual dispersal distance greatly depends on additional factors such as the behavior of the vectors. We put forward that more organisms that acquired traits for survival in stochastic environments such as wetlands, but not specifically adapted for endozoochory, may be sufficiently equipped to successfully pass a bird's digestive system. This may be explained by a digestive trade-off in birds, which maximize their net energy intake rate rather than digestive efficiency, since higher efficiency comes with the cost of prolonged retention times and hence reduces food intake. The resulting lower digestive efficiency allows species like aquatic snails, and potentially other fully functional organisms without obvious dispersal adaptations, to be transported internally. Adopting this view, endozoochorous dispersal may be more common than up to now thought.

The influence of unburnt patches and distance from refuges on post-fire bird communities

Predicting the response of faunal communities to fire presents a challenge for land managers worldwide because the post-fire responses of species may vary between locations and fire events. Post-fire recovery can occur via nucleated recovery from in situ surviving populations or by colonization from ex situ populations. Fine-scale spatial patterns in the patchiness of fires and the proximity of burnt sites to source populations may contribute to both the variability in post-fire responses and the processes by which populations recover. We examined the avifauna at recently burnt sites within extensive semi-arid shrublands of south-eastern Australia, including 72 sites < 5 years since fire and 26 sites 10 years since fire. Study sites represented a gradient of increasing distance from ‘unburnt’ vegetation (i.e. > 27 years since fire) and varied in the presence or absence of small (25–900 m2) unburnt patches of vegetation. For sites < 5 years since fire, species richness was higher at sites closer to unburnt vegetation and at sites containing unburnt patches. These patterns were no longer evident at sites of 10 years since fire. The probability of occurrence of three of seven bird species modelled decreased with increasing distance to unburnt vegetation, but this pattern was evident only at sites burnt uniformly. One species was found almost exclusively at patchily burnt sites. These results are consistent with the hypothesis that proximity to unburnt vegetation enhances post-fire occupancy, and that colonization from ex situ populations is an important process for post-fire recovery of avifauna. Additionally, small unburnt patches enhance the rapid recovery of assemblages post-fire. These patterns are important for understanding the dynamics of post-fire population recovery. We recommend that management of fire for ecological purposes should explicitly consider the role that the spatial attributes of fires play in determining the post-fire community.

Needleless electrospinning of uniform nanofibers using spiral coil spinnerets

Polyvinyl alcohol nanofibers were prepared by a needleless electrospinning technique using a rotating spiral wire coil as spinneret. The influences of coil dimension (e.g., coil length, coil diameter, spiral distance, and wire diameter) and operating parameters (e.g., applied voltage and spinning distance) on electrospinning process, nanofiber diameter, and fiber productivity were examined. It was found that the coil dimension had a considerable influence on the nanofiber production rate, but minor effect on the fiber diameter. The fiber production rate increased with the increased coil length or coil diameter, or the reduced spiral distance or wire diameter. Higher applied voltage or shorter collecting distance also improved the fiber production rate but had little influence on the fiber diameter. Compared with the conventional needle electrospinning, the coil electrospinning produced finer fibers with a narrower diameter distribution. A finite element method was used to analyze the electric field on the coil surface and in electrospinning zone. It was revealed that the high electric field intensity was concentrated on the coil surface, and the intensity was highly dependent on the coil dimension, which can be used to explain the electrospinning performances of coils. In addition, PAN nanofibers were prepared using the same needleless electrospinning technique to verify the improvement in productivity.