Molecular characterization of extended-spectrum cephalosporin-resistance in Escherichia coli in pigs on-farm and from clinical cases throughout Quebec, Canada during 16 years

Le développement de la multirésistance chez Escherichia coli est un problème important en médecine animale et humaine. En outre, l’émergence et la diffusion des déterminants de résistance aux céphalosporines à larges spectres de troisième génération (ESCs) parmi les isolats, incluant des céphalosporines essentielles en médecine humaine (ex. ceftriaxone et ceftiofur), est un problème majeur de santé publique. Cette thèse visait trois objectifs. D’abord étudier la dynamique de la résistance aux antimicrobiens (AMR) ainsi que la virulence et les profils génétiques de la AMR des E. coli isolées de porcs recevant une nourriture post-sevrage supplémentée avec de la chlortétracycline et de la pénicilline G, et, accessoirement, évaluer les effets d'additifs alimentaires sur cette dynamique en prenant pour exemple d'étude un minéral argileux, la clinoptilolite, étant donné son possible lien avec le gène blaCMY-2 qui confère la résistance au ceftiofur. L'objectif suivant était d'investiguer les mécanismes menant à une augmentation de la prévalence du gène blaCMY-2 chez les porcs qui reçoivent de la nourriture médicamentée et qui n'ont pas été exposés au ceftiofur Ici encore,nous avons examiné les effets d’un supplément alimentaire avec un minéral argileux sur ce phénomène. Enfin, notre dernier objectif était d’étudier, dans le temps, les génotypes des isolats cliniques d'E. coli résistant au ceftiofur, isolés de porcs malades au Québec à partir du moment où la résistance au ceftiofur a été rapportée, soit de 1997 jusqu'à 2012. Dans l'étude initiale, la prévalence de la résistance à 10 agents antimicrobiens, incluant le ceftiofur, s’accroît avec le temps chez les E.coli isolées de porcelets sevrés. Une augmentation tardive de la fréquence du gène blaCMY-2, encodant pour la résistance au ceftiofur, et la présence des gènes de virulence iucD et tsh a été observée chez les isolats. La nourriture supplémentée avec de la clinoptilolite a été associée à une augmentation rapide mais, par la suite, à une diminution de la fréquence des gènes blaCMY-2 dans les isolats. En parallèle, une augmentation tardive dans la fréquence des gènes blaCMY-2 et des gènes de virulence iucD et tsh a été observée dans les isolats des porcs contrôles, étant significativement plus élevé que dans les porcs ayant reçu l'additif au jour 28. La diversité, au sein des E. coli positives pour blaCMY-2 , a été observée au regard des profils AMR. Certaines lignées clonales d'E.coli sont devenues prédominantes avec le temps. La lignée clonale du phylotype A prédominait dans le groupe supplémenté, alors que les lignées clonales du phylotype B1, qui possèdent souvent le gène de virulence iucD associé aux ExPEC, prédominaient dans le groupe contrôle. Les plasmides d'incompatibilité (Inc) des groupes, I1, A/C, et ColE, porteurs de blaCMY-2, ont été observés dans les transformants. Parmi les souches cliniques d'E.coli ESC-résistantes, isolées de porcs malades au Québec de 1997 à 2012, blaCMY-2 était le gène codant pour une β-lactamase le plus fréquemment détecté; suivi par blaTEM et blaCTX-M,. De plus, les analyses clonales montrent une grande diversité génétique. Par contre, des isolats d'E. coli avec des profils PFGE identiques ont été retrouvés dans de multiples fermes la même année mais aussi dans des années différentes. La résistance à la gentamicine, kanamycine, chloramphenicol, et la fréquence de blaTEM et de IncA/C diminuent significativement au cour de la période étudiée, alors que la fréquence de IncI1 et de la multirésistance à sept catégories d'agents antimicrobiens augmente significativement avec le temps. L'émergence d'isolats d'E. coli positifs pour blaCTX-M, une β-lactamase à large spectre et produisant des ESBL, a été observée en 2011 et 2012 à partir de lignées clonales distinctes et chez de nombreuses fermes. Ces résultats, mis ensemble, apportent des précisions sur la dissémination de la résistance au ceftiofur dans les E. coli isolées de porcs. Au sein des échantillons prélevés chez les porcs sevrés recevant l'alimentation médicamentée sur une ferme, et pour laquelle une augmentation de la résistance au ceftiofur a été observée, les données révèlent que les souches d'E. coli positives pour blaCMY-2 et résistantes aux ESCs appartenaient à plusieurs lignées clonales différentes arborant divers profils AMR. Le gène blaCMY-2 se répand à la fois horizontalement et clonalement chez ces E. coli. L'ajout de clinoptilotite à la nourriture et le temps après le sevrage influencent la clonalité et la prévalence du gène blaCMY-2 dans les E. coli. Durant les 16 années d'étude, plusieurs lignées clonales différentes ont été observées parmi les souches d'E. coli résistantes au ceftiofur isolées de porc malades de fermes québécoises, bien qu’aucune lignée n'était persistante ou prédominante pendant l'étude. Les résultats suggèrent aussi que le gène blaCMY-2 s'est répandu à la fois horizontalement et clonalement au sein des fermes. De plus, blaCMY-2 est le gène majeur des β-lactamases chez ces isolats. À partir de 2011, nous rapportons l'émergence du gène blaCTX-M dans des lignées génétiques distinctes.

Clinically-relevant threshold of preformed donor-specific anti-HLA antibodies in kidney transplantation.

BACKGROUND: Pretransplant anti-HLA donor-specific antibodies (DSA) are recognized as a risk factor for acute antibody-mediated rejection (AMR) in kidney transplantation. The predictive value of C4d-fixing capability by DSA or of IgG DSA subclasses for acute AMR in the pretransplant setting has been recently studied. In addition DSA strength assessed by mean fluorescence intensity (MFI) may improve risk stratification. We aimed to analyze the relevance of preformed DSA and of DSA MFI values. METHODS: 280 consecutive patients with negative complement-dependent cytotoxicity crossmatches received a kidney transplant between 01/2008 and 03/2014. Sera were screened for the presence of DSA with a solid-phase assays on a Luminex flow analyzer, and the results were correlated with biopsy-proven acute AMR in the first year and survival. RESULTS: Pretransplant anti-HLA antibodies were present in 72 patients (25.7%) and 24 (8.6%) had DSA. There were 46 (16.4%) acute rejection episodes, 32 (11.4%) being cellular and 14 (5.0%) AMR. The incidence of acute AMR was higher in patients with pretransplant DSA (41.7%) than in those without (1.6%) (p<0.001). The median cumulative MFI (cMFI) of the group DSA+/AMR+ was 5680 vs 2208 in DSA+/AMR- (p=0.058). With univariate logistic regression a threshold value of 5280 cMFI was predictive for acute AMR. DSA cMFI's ability to predict AMR was also explored by ROC analysis. AUC was 0.728 and the best threshold was a cMFI of 4340. Importantly pretransplant DSA>5280 cMFI had a detrimental effect on 5-year graft survival. CONCLUSIONS: Preformed DSA cMFI values were clinically-relevant for the prediction of acute AMR and graft survival in kidney transplantation. A threshold of 4300-5300 cMFI was a significant outcome predictor.

Hybrid mathematical and informational modeling of beam-to-column connections

The analysis of steel and composite frames has traditionally been carried out by idealizing beam-to-column connections as either rigid or pinned. Although some advanced analysis methods have been proposed to account for semi-rigid connections, the performance of these methods strongly depends on the proper modeling of connection behavior. The primary challenge of modeling beam-to-column connections is their inelastic response and continuously varying stiffness, strength, and ductility. In this dissertation, two distinct approaches—mathematical models and informational models—are proposed to account for the complex hysteretic behavior of beam-to-column connections. The performance of the two approaches is examined and is then followed by a discussion of their merits and deficiencies. To capitalize on the merits of both mathematical and informational representations, a new approach, a hybrid modeling framework, is developed and demonstrated through modeling beam-to-column connections. Component-based modeling is a compromise spanning two extremes in the field of mathematical modeling: simplified global models and finite element models. In the component-based modeling of angle connections, the five critical components of excessive deformation are identified. Constitutive relationships of angles, column panel zones, and contact between angles and column flanges, are derived by using only material and geometric properties and theoretical mechanics considerations. Those of slip and bolt hole ovalization are simplified by empirically-suggested mathematical representation and expert opinions. A mathematical model is then assembled as a macro-element by combining rigid bars and springs that represent the constitutive relationship of components. Lastly, the moment-rotation curves of the mathematical models are compared with those of experimental tests. In the case of a top-and-seat angle connection with double web angles, a pinched hysteretic response is predicted quite well by complete mechanical models, which take advantage of only material and geometric properties. On the other hand, to exhibit the highly pinched behavior of a top-and-seat angle connection without web angles, a mathematical model requires components of slip and bolt hole ovalization, which are more amenable to informational modeling. An alternative method is informational modeling, which constitutes a fundamental shift from mathematical equations to data that contain the required information about underlying mechanics. The information is extracted from observed data and stored in neural networks. Two different training data sets, analytically-generated and experimental data, are tested to examine the performance of informational models. Both informational models show acceptable agreement with the moment-rotation curves of the experiments. Adding a degradation parameter improves the informational models when modeling highly pinched hysteretic behavior. However, informational models cannot represent the contribution of individual components and therefore do not provide an insight into the underlying mechanics of components. In this study, a new hybrid modeling framework is proposed. In the hybrid framework, a conventional mathematical model is complemented by the informational methods. The basic premise of the proposed hybrid methodology is that not all features of system response are amenable to mathematical modeling, hence considering informational alternatives. This may be because (i) the underlying theory is not available or not sufficiently developed, or (ii) the existing theory is too complex and therefore not suitable for modeling within building frame analysis. The role of informational methods is to model aspects that the mathematical model leaves out. Autoprogressive algorithm and self-learning simulation extract the missing aspects from a system response. In a hybrid framework, experimental data is an integral part of modeling, rather than being used strictly for validation processes. The potential of the hybrid methodology is illustrated through modeling complex hysteretic behavior of beam-to-column connections. Mechanics-based components of deformation such as angles, flange-plates, and column panel zone, are idealized to a mathematical model by using a complete mechanical approach. Although the mathematical model represents envelope curves in terms of initial stiffness and yielding strength, it is not capable of capturing the pinching effects. Pinching is caused mainly by separation between angles and column flanges as well as slip between angles/flange-plates and beam flanges. These components of deformation are suitable for informational modeling. Finally, the moment-rotation curves of the hybrid models are validated with those of the experimental tests. The comparison shows that the hybrid models are capable of representing the highly pinched hysteretic behavior of beam-to-column connections. In addition, the developed hybrid model is successfully used to predict the behavior of a newly-designed connection.

Free-Floating Thrombi in the Right Atrium Causing Pulmonary Embolism

A 74-year-old man presented to our Emergency Department with acute dyspnoea. His electrocardiogram showed atrial flutter with 2:1 block and a rate of 150 bpm. Initial investigations revealed a D-dimer level of 6.01 mg/dl. Based on the patient’s complaints and the high D-dimer level, computed tomography pulmonary angiography was immediately performed. This showed no evidence of pulmonary embolism, but there were pneumatic changes in the right upper lung lobe. Antibiotics treatment was started with pipracillin/tazobactam, after which the patient’s condition improved. However, on the third day after admission he developed acute dyspnoea, diaphoresis and cardiopulmonary instability immediately after defecation. To promptly confirm our clinical suspicion of pulmonary embolism, a transthoracic echocardiography was carried out. This demonstrated a worm-like, mobile mass in the right heart. The right ventricle was enlarged, and paradoxical septal motion was present, indicating right ventricular pressure overload. The systolic tricuspid valvular gradient was 56 mmHg. The patient was treated with thrombolysis. His condition was greatly clinically improved after 3 hours. After 10 days of hospitalization, the patient was discharged.

PCA-FNN based performance prediction for water injection in oilfields.

In order to solve the problem of uncertain cycle of water injection in the oilfield, this paper proposed a numerical method based on PCA-FNN, so that it can forecast the effective cycle of water injection. PCA is used to reduce the dimension of original data, while FNN is applied to train and test the new data. The correctness of PCA-FNN model is verified by the real injection statistics data from 116 wells of an oilfield, the result shows that the average absolute error and relative error of the test are 1.97 months and 10.75% respectively. The testing accuracy has been greatly improved by PCA-FNN model compare with the FNN which has not been processed by PCA and multiple liner regression method. Therefore, PCA-FNN method is reliable to forecast the effectiveness cycle of water injection and it can be used as an decision-making reference method for the engineers.

Examining the growth and evolution of magnetic fields in clusters of galaxies: a numerical perspective

Magnetic fields are ubiquitous in galaxy cluster atmospheres and have a variety of astrophysical and cosmological consequences. Magnetic fields can contribute to the pressure support of clusters, affect thermal conduction, and modify the evolution of bubbles driven by active galactic nuclei. However, we currently do not fully understand the origin and evolution of these fields throughout cosmic time. Furthermore, we do not have a general understanding of the relationship between magnetic field strength and topology and other cluster properties, such as mass and X-ray luminosity. We can now begin to answer some of these questions using large-scale cosmological magnetohydrodynamic (MHD) simulations of the formation of galaxy clusters including the seeding and growth of magnetic fields. Using large-scale cosmological simulations with the FLASH code combined with a simplified model of the acceleration of cosmic rays responsible for the generation of radio halos, we find that the galaxy cluster frequency distribution and expected number counts of radio halos from upcoming low-frequency sur- veys are strongly dependent on the strength of magnetic fields. Thus, a more complete understanding of the origin and evolution of magnetic fields is necessary to understand and constrain models of diffuse synchrotron emission from clusters. One favored model for generating magnetic fields is through the amplification of weak seed fields in active galactic nuclei (AGN) accretion disks and their subsequent injection into cluster atmospheres via AGN-driven jets and bubbles. However, current large-scale cosmological simulations cannot directly include the physical processes associated with the accretion and feedback processes of AGN or the seeding and merging of the associated SMBHs. Thus, we must include these effects as subgrid models. In order to carefully study the growth of magnetic fields in clusters via AGN-driven outflows, we present a systematic study of SMBH and AGN subgrid models. Using dark-matter only cosmological simulations, we find that many important quantities, such as the relationship between SMBH mass and galactic bulge velocity dispersion and the merger rate of black holes, are highly sensitive to the subgrid model assumptions of SMBHs. In addition, using MHD calculations of an isolated cluster, we find that magnetic field strengths, extent, topology, and relationship to other gas quantities such as temperature and density are also highly dependent on the chosen model of accretion and feedback. We use these systematic studies of SMBHs and AGN inform and constrain our choice of subgrid models, and we use those results to outline a fully cosmological MHD simulation to study the injection and growth of magnetic fields in clusters of galaxies. This simulation will be the first to study the birth and evolution of magnetic fields using a fully closed accretion-feedback cycle, with as few assumptions as possible and a clearer understanding of the effects of the various parameter choices.

A deformation model of flexible, high area-to-mass ratio debris under perturbations and validation method

A new type of space debris was recently discovered by Schildknecht in near -geosynchronous orbit (GEO). These objects were later identified as exhibiting properties associated with High Area-to-Mass ratio (HAMR) objects. According to their brightness magnitudes (light curve), high rotation rates and composition properties (albedo, amount of specular and diffuse reflection, colour, etc), it is thought that these objects are multilayer insulation (MLI). Observations have shown that this debris type is very sensitive to environmental disturbances, particularly solar radiation pressure, due to the fact that their shapes are easily deformed leading to changes in the Area-to-Mass ratio (AMR) over time. This thesis proposes a simple effective flexible model of the thin, deformable membrane with two different methods. Firstly, this debris is modelled with Finite Element Analysis (FEA) by using Bernoulli-Euler theory called “Bernoulli model”. The Bernoulli model is constructed with beam elements consisting 2 nodes and each node has six degrees of freedom (DoF). The mass of membrane is distributed in beam elements. Secondly, the debris based on multibody dynamics theory call “Multibody model” is modelled as a series of lump masses, connected through flexible joints, representing the flexibility of the membrane itself. The mass of the membrane, albeit low, is taken into account with lump masses in the joints. The dynamic equations for the masses, including the constraints defined by the connecting rigid rod, are derived using fundamental Newtonian mechanics. The physical properties of both flexible models required by the models (membrane density, reflectivity, composition, etc.), are assumed to be those of multilayer insulation. Both flexible membrane models are then propagated together with classical orbital and attitude equations of motion near GEO region to predict the orbital evolution under the perturbations of solar radiation pressure, Earth’s gravity field, luni-solar gravitational fields and self-shadowing effect. These results are then compared to two rigid body models (cannonball and flat rigid plate). In this investigation, when comparing with a rigid model, the evolutions of orbital elements of the flexible models indicate the difference of inclination and secular eccentricity evolutions, rapid irregular attitude motion and unstable cross-section area due to a deformation over time. Then, the Monte Carlo simulations by varying initial attitude dynamics and deformed angle are investigated and compared with rigid models over 100 days. As the results of the simulations, the different initial conditions provide unique orbital motions, which is significantly different in term of orbital motions of both rigid models. Furthermore, this thesis presents a methodology to determine the material dynamic properties of thin membranes and validates the deformation of the multibody model with real MLI materials. Experiments are performed in a high vacuum chamber (10-4 mbar) replicating space environment. A thin membrane is hinged at one end but free at the other. The free motion experiment, the first experiment, is a free vibration test to determine the damping coefficient and natural frequency of the thin membrane. In this test, the membrane is allowed to fall freely in the chamber with the motion tracked and captured through high velocity video frames. A Kalman filter technique is implemented in the tracking algorithm to reduce noise and increase the tracking accuracy of the oscillating motion. The forced motion experiment, the last test, is performed to determine the deformation characteristics of the object. A high power spotlight (500-2000W) is used to illuminate the MLI and the displacements are measured by means of a high resolution laser sensor. Finite Element Analysis (FEA) and multibody dynamics of the experimental setups are used for the validation of the flexible model by comparing with the experimental results of displacements and natural frequencies.

Refolding of omega conotoxin peptide derived from marine snail, Conus magus, to evaluate its analgesic effects

Oxidative refolding is one of the key challenges hampering the development of peptide based compounds as therapeutics. The correct refolding for three disulfide peptide like w-Conotoxi n MVIIA is difficult and crucial for biological activity. This work advanced knowledge of chemical and biological for improve oxidative refolding of synthetic w-Conotoxi n MVIIA in base of Conus magus venom. The present study aimed to set up an appropriate and effective protocols for refolding of disulfide-rich w-Conotoxin MVIIA. In this study, the crude peptide was protected with Acm group, according to the right amino acid sequences (Synthesized by Australian Company). The crude peptide was purified by H PLC. To prepare the peptide to refolding, innovative deprotection applied molar ratio (AMR) method was performed based on mercury. Accuracy of deprotection was approved by reverse phase chromatography. The deprotected target peptide (omega-conotoxin) was determined by SDS-PAGE. Then the Oxidative refolding of target peptide was performed in six protocol based on Guanidinium chloride and oxidized and reduced Glutathione. Analgesic effect of refolded peptide was surveyed with formalin test in mice Balb/c. Non neurotoxic effects of target peptides were survey with ICV injection in mice model (C57/BL6). The innovative deprotection protocol performed based on the best ratio of mercury/2-mercaptoethanol adjusted to 1mg/10p1 in 90 minute. The results showed the yield and purity of omega-conotoxin MVIIA as 93 and 95%, respectively. Refolding of 40 mg omega Conotoxin with GSSG and GSH on ratio of 10:1 and 20 mM ammonium acetate showed the best analgesic effect compared with the other methods. The result showed 95.5% yield and 98% purity of omega-conotoxin MVIIA in this refolding method. Related refolding method reduced 85% pain in experimented mice using 7 ng of the peptide. That was 71.5 fold stronger than morphine and 2 times than standard Prialt®. And it was not neurotoxic in mice. In this study, refolding method for omega-conotoxin MVIIA was optimized in the fourth factor including: reducing the time, amount and number of reagent and increase the efficiency. We introduced new method for deprotection of omega-conotoxin MVIIA. Effective, economic and applied refolding and deprotecti on method was performed in this research may al so be applied to similar omega conotoxin peptides.

Extraction and detection of mycotoxins in medicinal and aromatic plants: a case study with Aloysia citrodora P.

Plants frequently suffer contaminations by toxigenic fungi, and their mycotoxins can be produced throughout growth, harvest, drying and storage periods. The objective of this work was to validate a method for detection of toxins in medicinal and aromatic plants, through a fast and highly sensitive method, optimizing the joint co-extraction of aflatoxins (AF: AFB1, AFB2, AFG1 and AFG2) and ochratoxin A (OTA) by using Aloysia citrodora P. (lemon verbena) as a case study. For optimization purposes, samples were spiked (n=3) with standard solutions of a mix of the four AFs and OTA at 10 ng/g for AFB1, AFG1 and OTA, and at 6 ng/g of AFB2 and AFG2. Several extraction procedures were tested: i) ultrasound-assisted extraction in sodium chloride and methanol/water (80:20, v/v) [(OTA+AFs)1]; ii) maceration in methanol/1% NaHCO3 (70:30, v/v) [(OTA+AFs)2]; iii) maceration in methanol/1% NaHCO3 (70:30, v/v) (OTA1); and iv) maceration in sodium chloride and methanol/water (80:20, v/v) (AF1). AF and OTA were purified using the mycotoxin-specific immunoaffinity columns AflaTest WB and OchraTest WB (VICAM), respectively. Separation was performed with a Merck Chromolith Performance C18 column (100 x 4.6 mm) by reverse-phase HPLC coupled to a fluorescence detector (FLD) and a photochemical derivatization system (for AF). The recoveries obtained from the spiked samples showed that the single-extraction methods (OTA1 and AF1) performed better than co-extraction methods. For in-house validation of the selected methods OTA1 and AF1, recovery and precision were determined (n=6). The recovery of OTA for method OTA1 was 81%, and intermediate precision (RSDint) was 1.1%. The recoveries of AFB1, AFB2, AFG1 and AFG2 ranged from 64% to 110% for method AF1, with RSDint lower than 5%. Methods OTA1 and AF1 showed precision and recoveries within the legislated values and were found to be suitable for the extraction of OTA and AF for the matrix under study.

Perdas fermentativas e composição bromatológica da entrecasca de palmito pupunha ensilada com aditivos químicos

Objetivou-se avaliar o efeito da inclusão de aditivos químicos na ensilagem de resíduos (entrecasca) da produção de palmito pupunha (Bactris gasipaes, Kunth). Utilizaram-se silos experimentais (baldes de 20 litros) providos de aparatos para determinação gravimétrica de perdas por gases e efluentes. Os tratamentos aplicados foram: controle (sem aditivos); ureia (1% da MV) e cal virgem (1% da MV). Decorridos 70 dias de armazenagem, os silos foram pesados, abertos e amostrados. As perdas por efluentes e gases aumentaram com a aplicação de cal virgem na ensilagem. As perdas totais de MS foram de 15,1; 14,4 e 26,6% nas silagens controle, ureia e cal, respectivamente. em todas as silagens, houve redução no teor de FDN e elevação da fração FDA, o que indica desaparecimento da fração hemicelulose. A relação cálcio:fósforo aumentou substancialmente com a adição de cal virgem, de 4,1:1 na silagem controle para 15,6:1 na silagem com cal. O resíduo da extração do palmito pupunha pode ser classificado como alimento de média qualidade e alto teor de umidade. Os aditivos aplicados na ensilagem não são efetivos em reduzir as perdas fermentativas no processo de conservação.

Molecular characterization of extended-spectrum cephalosporin-resistance in Escherichia coli in pigs on-farm and from clinical cases throughout Quebec, Canada during 16 years

Le développement de la multirésistance chez Escherichia coli est un problème important en médecine animale et humaine. En outre, l’émergence et la diffusion des déterminants de résistance aux céphalosporines à larges spectres de troisième génération (ESCs) parmi les isolats, incluant des céphalosporines essentielles en médecine humaine (ex. ceftriaxone et ceftiofur), est un problème majeur de santé publique. Cette thèse visait trois objectifs. D’abord étudier la dynamique de la résistance aux antimicrobiens (AMR) ainsi que la virulence et les profils génétiques de la AMR des E. coli isolées de porcs recevant une nourriture post-sevrage supplémentée avec de la chlortétracycline et de la pénicilline G, et, accessoirement, évaluer les effets d'additifs alimentaires sur cette dynamique en prenant pour exemple d'étude un minéral argileux, la clinoptilolite, étant donné son possible lien avec le gène blaCMY-2 qui confère la résistance au ceftiofur. L'objectif suivant était d'investiguer les mécanismes menant à une augmentation de la prévalence du gène blaCMY-2 chez les porcs qui reçoivent de la nourriture médicamentée et qui n'ont pas été exposés au ceftiofur Ici encore,nous avons examiné les effets d’un supplément alimentaire avec un minéral argileux sur ce phénomène. Enfin, notre dernier objectif était d’étudier, dans le temps, les génotypes des isolats cliniques d'E. coli résistant au ceftiofur, isolés de porcs malades au Québec à partir du moment où la résistance au ceftiofur a été rapportée, soit de 1997 jusqu'à 2012. Dans l'étude initiale, la prévalence de la résistance à 10 agents antimicrobiens, incluant le ceftiofur, s’accroît avec le temps chez les E.coli isolées de porcelets sevrés. Une augmentation tardive de la fréquence du gène blaCMY-2, encodant pour la résistance au ceftiofur, et la présence des gènes de virulence iucD et tsh a été observée chez les isolats. La nourriture supplémentée avec de la clinoptilolite a été associée à une augmentation rapide mais, par la suite, à une diminution de la fréquence des gènes blaCMY-2 dans les isolats. En parallèle, une augmentation tardive dans la fréquence des gènes blaCMY-2 et des gènes de virulence iucD et tsh a été observée dans les isolats des porcs contrôles, étant significativement plus élevé que dans les porcs ayant reçu l'additif au jour 28. La diversité, au sein des E. coli positives pour blaCMY-2 , a été observée au regard des profils AMR. Certaines lignées clonales d'E.coli sont devenues prédominantes avec le temps. La lignée clonale du phylotype A prédominait dans le groupe supplémenté, alors que les lignées clonales du phylotype B1, qui possèdent souvent le gène de virulence iucD associé aux ExPEC, prédominaient dans le groupe contrôle. Les plasmides d'incompatibilité (Inc) des groupes, I1, A/C, et ColE, porteurs de blaCMY-2, ont été observés dans les transformants. Parmi les souches cliniques d'E.coli ESC-résistantes, isolées de porcs malades au Québec de 1997 à 2012, blaCMY-2 était le gène codant pour une β-lactamase le plus fréquemment détecté; suivi par blaTEM et blaCTX-M,. De plus, les analyses clonales montrent une grande diversité génétique. Par contre, des isolats d'E. coli avec des profils PFGE identiques ont été retrouvés dans de multiples fermes la même année mais aussi dans des années différentes. La résistance à la gentamicine, kanamycine, chloramphenicol, et la fréquence de blaTEM et de IncA/C diminuent significativement au cour de la période étudiée, alors que la fréquence de IncI1 et de la multirésistance à sept catégories d'agents antimicrobiens augmente significativement avec le temps. L'émergence d'isolats d'E. coli positifs pour blaCTX-M, une β-lactamase à large spectre et produisant des ESBL, a été observée en 2011 et 2012 à partir de lignées clonales distinctes et chez de nombreuses fermes. Ces résultats, mis ensemble, apportent des précisions sur la dissémination de la résistance au ceftiofur dans les E. coli isolées de porcs. Au sein des échantillons prélevés chez les porcs sevrés recevant l'alimentation médicamentée sur une ferme, et pour laquelle une augmentation de la résistance au ceftiofur a été observée, les données révèlent que les souches d'E. coli positives pour blaCMY-2 et résistantes aux ESCs appartenaient à plusieurs lignées clonales différentes arborant divers profils AMR. Le gène blaCMY-2 se répand à la fois horizontalement et clonalement chez ces E. coli. L'ajout de clinoptilotite à la nourriture et le temps après le sevrage influencent la clonalité et la prévalence du gène blaCMY-2 dans les E. coli. Durant les 16 années d'étude, plusieurs lignées clonales différentes ont été observées parmi les souches d'E. coli résistantes au ceftiofur isolées de porc malades de fermes québécoises, bien qu’aucune lignée n'était persistante ou prédominante pendant l'étude. Les résultats suggèrent aussi que le gène blaCMY-2 s'est répandu à la fois horizontalement et clonalement au sein des fermes. De plus, blaCMY-2 est le gène majeur des β-lactamases chez ces isolats. À partir de 2011, nous rapportons l'émergence du gène blaCTX-M dans des lignées génétiques distinctes.

Effect of milling time on mechanical properties of fly ash incorporated cement mortars

Abstract. Currently, thermal energy generation through coal combustion produces ash particles which cause serious environmental problems and which are known as Fly Ash (FA). FA main components are oxides of silicon, aluminum, iron, calcium and magnesium in addition, toxic metals such as arsenic and cobalt. The use of fly ash as a cement replacement material increases long term strength and durability of concrete. In this work, samples were prepared by replacing cement by ground fly ash in 10, 20 and 30% by weight. The characterization of raw materials and microstructure was obtained by Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD). The final results showed that the grinding process significantly improves the mechanical properties of all samples when compared replacing a mortar made with cement by ground fly ash and the reference samples without added fly ash. The beneficial effect of the ground fly ash can increase the use of this product in precast concrete industry

Production and characterization of an alcoholic fermented beverage from grape must and beer wort

Mestrado Vinifera Euromaster - Instituto Superior de Agronomia - UL

Positive biocompatibility of nanocrystalline glass-like carbon thin films

The interest in carbon nanomaterials with high transparency and electrical conductivity has grown within the last decade in view of a wide variety of applications, including biocompatible sensors, diagnostic devices and bioelectronic implants. The aim of this work is to test the biocompatibility of particular nanometer-thin nanocrystalline glass-like carbon films (NGLC), a disordered structure of graphene flakes joined by carbon matrix (Romero et al., 2016). We used a cell line (SN4741) from substantia nigra dopaminergic cells derived from transgenic mouse embryo cells (Son et al., 1999). Some cells were cultured on top of NGLC films (5, 20 and 80 nm) and other with NGLC nanoflakes (approx. 5-10 mm2) in increasing concentrations: 1, 5, 10, 20 and 50 μg/ml, during 24 h, 3 days and 7 days. Cells growing in normal conditions were defined under culture with DMEM supplemented with 10% FCS, Glucose (0,6%), penicillin-streptomycin (50U/ml) and L-glutamine (2mM) at 5%CO2 humidified atmosphere. Nanoflakes were resuspended in DMEM at the stock concentration (2 g/l). The experiments were conducted in 96 well plates (Corning) using 2500 cells per well. For MTT analysis, the manufacturer recommendations were followed (Roche, MTT kit assay): a positive control with a 10% Triton X-100 treatments (15 minutes) and a negative control without neither Triton X-100 nor NGLC. As apoptosis/necrosis assay we used LIVE/DEAD® Viability/Cytotoxicity Assay Kit (Invitrogen). In a separate experiment, cells were cultured on top of the NGLC films for 7 days. Primary antibodies: anti-synaptophysin (SYP, clone SY38, Chemicon) and goat anti-GIRK2 (G-protein-regulated inward-rectifier potassium channel 2 protein) (Abcom) following protocol for immunofluorescence. WB for proteins detection performed with a polyclonal anti-rabbit proliferating cell nuclear antigen (PCNA). Results demonstrated the biocompatibility with different concentration of NGLC varying the degree of survival from a low concentration (1 mg/ml) in the first 24 h to high concentrations (20-50 g/ml) after 7 days as it is corroborated by the PCNA analysis. Cells cultured on top of the film showed after 7 days axonal-like alignment and edge orientation as well as net-like images. Neuronal functionality was demonstrated to a certain extent through the analysis of coexistence between SYP and GIRK2. In conclusion, this nanomaterial could offer a powerful platform for biomedical applications such as neural tissue engineering