Proton flux induced by free fatty acids across phospholipid bilayers: New evidences based on short-circuit measurements in planar lipid membranes

Free fatty acids (FFA) are important mediators of proton transport across membranes. However, information concerning the influence of the Structural features of both FFA and the membrane environment on the proton translocation mechanisms across phospholipid membranes is relatively scant. The effects of FFA chain length, unsaturation and membrane composition on proton transport have been addressed in this study by means of electrical measurements in planar lipid bilayers. Proton conductance (G(H)(+)) was calculated from open-circuit voltage and short-circuit current density measurements. We found that cis-unsaturated FFA caused a more pronounced effect on proton transport as compared to Saturated and trans-unsaturated FFA. Cholesterol and cardiolipin decreased membrane leak conductance. Cardiolipin also decreased proton conductance. These effects indicate a dual modulation of protein-independent proton transport by FFA: through a flip-flop mechanism and by modifying a proton diffusional pathway. Moreover the membrane phospholipid composition was shown to importantly affect both processes. (C) 2009 Elsevier Inc. All rights reserved.

Mass spectrometric investigation of the DNA-binding properties of an anthracycline with two trisaccharide chains

Cosmomycin D (CosD) is an anthracycline that has two trisaccharide chains linked to its ring system. Gel electrophoresis showed that CosD formed stable complexes with plasmid DNA under conditions where daunorubicin (Dn) and doxorubicin (Dx) dissociated to some extent during the experiments. The footprint and stability of CosD complexed with 10- and 16 trier DNA was investigated using several applications of electrospray ionisation mass spectrometry (ESI-MS). ESI-MS binding profiles showed that fewer CosD molecules bound to the sequences than Dn or Dx. In agreement with this, ESI-MS analysis of nuclease digestion products of the complexes showed that CosD protected the DNA to a greater extent than Dn or Dx. In tandem MS experiments, all CosD-DNA complexes were more stable than Dn- and Dx-DNA complexes. These results Support that CosD binds more tightly to DNA and exerts a larger footprint than ESI-MS investigations of the binding properties of CosD Could be carried out rapidly and using only small amounts of sample. (C) 2008 Elsevier Inc. All rights reserved.

Interactions of mast cell degranulating peptides with model membranes: A comparative biophysical study

In the last decade, there has been renewed interest in biologically active peptides in fields like allergy, autoimmume diseases and antibiotic therapy. Mast cell degranulating peptides mimic G-protein receptors, showing different activity levels even among homologous peptides. Another important feature is their ability to interact directly with membrane phospholipids, in a fast and concentration-dependent way. The mechanism of action of peptide HR1 on model membranes was investigated comparatively to other mast cell degranulating peptides (Mastoparan, Eumenitin and Anoplin) to evidence the features that modulate their selectivity. Using vesicle leakage, single-channel recordings and zeta-potential measurements, we demonstrated that HR1 preferentially binds to anionic bilayers, accumulates, folds, and at very low concentrations, is able to insert and create membrane spanning ion-selective pores. We discuss the ion selectivity character of the pores based on the neutralization or screening of the peptides charges by the bilayer head group charges or dipoles. (C) 2009 Elsevier Inc. All rights reserved.

Oxidation and nitration of ribonuclease and lysozyme by peroxynitrite and myeloperoxidase

In spite of the many studies on protein modifications by reactive species, knowledge about the products resulting from the oxidation of protein-aromatic residues, including protein-derived radicals and their stable products, remains limited. Here, we compared the oxidative modifications promoted by peroxynitrite and myeloperoxidase/hydrogen peroxide/nitrite in two model proteins, ribonuclease (6Tyr) and lysozyme (3Tyr/6Trp). The formation of protein-derived radicals and products was higher at pH 5.4 and 7.4 for myeloperoxidase and peroxynitrite, respectively. The main product was 3-nitro-Tyr for both proteins and oxidants. Lysozyme rendered similar yields of nitro-Trp, particularly when oxidized by peroxynitrite. Hydroxylated and dimerized products of Trp and Tyr were also produced, but in lower yields. Localization of the main modified residues indicates that peroxynitrite decomposes to radicals within the proteins behaving less specifically than myeloperoxidase. Nitrogen dioxide is emphasized as an important protein modifier. (C) 2009 Elsevier Inc. All rights reserved.

Stoichiometry and thermodynamics of the interaction between the C-terminus of human 90 kDa heat shock protein Hsp90 and the mitochondrial translocase of outer membrane Tom70

A large majority of the 1000-1500 proteins in the mitochondria are encoded by the nuclear genome, and therefore, they are translated in the cytosol in the form and contain signals to enable the import of proteins into the organelle. The TOM complex is the major translocase of the outer membrane responsible for preprotein translocation. It consists of a general import pore complex and two membrane import receptors, Tom20 and Tom70. Tom70 contains a characteristic TPR domain, which is a docking site for the Hsp70 and Hsp90 chaperones. These chaperones are involved in protecting cytosolic preproteins from aggregation and then in delivering them to the TOM complex. Although highly significant, many aspects of the interaction between Tom70 and Hsp90 are still uncertain. Thus, we used biophysical tools to study the interaction between the C-terminal domain of Hsp90 (C-Hsp90), which contains the EEVD motif that binds to TPR domains, and the cytosolic fragment of Tom70. The results indicate a stoichiometry of binding of one monomer of Tom70 per dimer of C-Hsp90 with a K(D) of 360 30 nM, and the stoichiometry and thermodynamic parameters obtained suggested that Tom70 presents a different mechanism of interaction with Hsp90 when compared with other TPR proteins investigated. (C) 2011 Elsevier Inc. All rights reserved.

Märkskyltprogram för mättransformatorer

Detta examensarbete utfördes på ABB Power Technologies i Ludvika med syfte att förenkla tillverkningen av märkskyltar till mättransformatorer.Tidigare utformades alla skyltar för hand i Excel utifrån data från ett beräkningsprogram. Det gjorde att det behövdes en mall för varje variant i varje språk vilket ledde till väldigt många mallar. På ABB ville man både komma ifrån mängden olika mallar och det tidskrävande handarbetet som dessutom kunde resultera i att skyltarna inte fick enhetligt utseende. Genom att göra ett program som automatiskt genererar skyltarna utifrån en standardmall med hjälp av en fil från beräkningsprogrammet sparas mycket tid och arbete. Den som utformar skylten behöver då bara lägga till några få data själv och kan välja språk direkt i programmet istället för att behöva skriva allt för hand.Resultatet av detta examensarbete blev ett program som används av ABB för att göra skyltar till nästan alla mättransformatorer.

Framtagning av prototyp för att läsa och dokumentera kundspecifikationer

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time. All data is also manually inserted into the calculation tools.To decrease the risk that data is left out or gets distorted they want to have a tool to aid with the reading of the specification and the documentation of that work. Already read data can be copied over to another alternative so that it not must be read one more time. The read data are to be stored in a database so that it easily can be per automation inserted into the different design tools.

Förändringsförslag förABB:s godshantering : – Utvärdering av existerandeautomatiska datafångstmetoder

Examensarbetet utfördes på uppdrag av ABB i Ludvika. ABB vill öka effektiviseringen förhanteringen av inkommande gods. Detta för att det mesta sker manuellt i dagens läge och det tarmycket tid och kan resultera i felkällor.Arbetet har två syften. Det första syftet är att förändra del av verksamheten, genom att kommamed ett förändringsförslag när det gäller godshanteringen. Det andra syftet är att jämförastreckkoder och RFID för att se vilket alternativ som passar bäst.För att få fram ett förändringsförslag har vi jobbat med FA/SIM-metoden.Vi har tagit fram ett antal förändringsförslag nedan följer ett urval av dessa:• Ställa krav på leverantörerna att de skall använda streckkoder med rätt standard Code128.• Utforma tydliga och enkla kravspecifikationer för att enklare kunna ta till sig.• Förbättra nuvarande kundrelationer. Genomför en uppföljning med jämna mellanrum föratt se hur kundrelationerna sköts.

Improvement of Routine Test Process of High Voltage Power Capacitors

The capacitor test process at ABB Capacitors in Ludvika must be improved to meet future demands for high voltage products. To find a solution to how to improve the test process, an investigation was performed to establish which parts of the process are used and how they operate. Several parts which can improves the process were identified. One of them was selected to be improved in correlation with the subject, mechanical engineering. Four concepts were generated and decision matrixes were used to systematically select the best concept. By improving the process several benefits has been added to the process. More units are able to be tested and lead time is reduced. As the lead time is reduced the cost for each unit is reduced, workers will work less hours for the same amount of tested units, future work to further improve the process is also identified. The selected concept was concept 1, the sway stop concept. This concept is used to reduce the sway of the capacitors as they have entered the test facility, the box. By improving this part of the test process a time saving of 20 seconds per unit can be achieved, equivalent to 7% time reduction. This can be compared to an additional 1400 units each year.

Bikesharing i Ludvika : ett initiativ från Idéteknik, Anders Dahlberg

Med tre stora expansioner inom näringslivet, ABB, Spendrups och gruvdrift under Väsman, står Ludvika inför omfattande förändringar. De nya arbetstillfällena väntas dra med sig ökad trafik genom inpendling. För att avlasta befintliga flaskhalsar samt för att öka attraktionsvärdet på Ludvika för inflyttande och turister har därför denna förstudie kring möjligheterna för utveckling av ett lånecykelsystem, LCS, gjorts. Det visar sig att Ludvika, med omnejd, har goda förutsättningar för att kunna utveckla ett eget LCS och exportera detta på en kraftigt växande marknad. Detta kräver dock innovation och nytänkande då det redan finns starka konkurrenter som erbjuder standardiserade system. Att endast köpa in ett LCS till Ludvika är knappast intressant då staden är i minsta laget för att det ska bli lönsamt. Däremot kan det vara intressant att stödja utvecklingen av ett dalaproducerat system då detta kan ge synergier t.ex. inom ökad användning av RFID-teknik i regionen samt en grön image till Ludvika och de aktörer som knyts till systemet.

Salesperson’s Personality, Motivation and Selling Performance : The Study of New Product Selling

In the highly competitive environment businesses invest big amounts of money into the new product development. New product success potentially depends on different factors among which salespeople play an important role. The aim of this paper is to explore the potential link between salespeople’s personality, motivation to sell new products and performance in selling new products. Based on the theoretical background of the Big Five personality dimensions, motivation and selling performance hypotheses were formulated and tested using statistical methods of correlation and regression analysis. The data was collected within one technologically intensive organization – ABB AB in Sweden using online web questionnaire and self-assessment measurements. Total investigation was conducted among organization’s salesforce. The findings confirm the importance of salesperson’s personality empirically showing that the latter significantly predicts both motivation and performance in selling new products. From all the Big Five Extraversion was confirmed to be the most important predictor of both motivation and performance in selling new products. Extraversion was found positively related with both motivation and performance in selling new products. Salespeople scoring high in Extraversion and especially possessing such characteristics as confident, energetic and sociable tend to be more motivated to sell new products and show higher performance results. Other personality dimensions such as Agreeableness, Conscientiousness, Neuroticism, and Openness to experience complexly approached are not proved to be significantly related neither with motivation nor performance in selling new products. The results are explained by the extreme importance of Extraversion in new product selling situation which analyzing in combination with the other personality dimensions suppresses the others. Finding regarding controlling for certain demographical characteristics of salespeople reveal that performance in selling new products is determined by selling experience. Salespeople’s age is not proved to be significantly related neither with motivation nor performance in selling new products. Findings regarding salespeople’s gender though proposing that males are more motivated to sell new products cannot be generalized due to the study limitations.

Desenvolvimento e implementação de uma interface de comunicação para controlador robótico industrial

O presente trabalho trata do desenvolvimento de um sistema para comunicação bidirecional entre um robô ABB IRB 1400, originalmente desprovido de uma interface de comunicação de dados, e um microcomputador PC padrão. Para a implementação utilizou-se a porta paralela do PC e uma Placa E/S Digital para sinais discretos disponível no controlador do robô. Devido à diferença de caracterìsticas elétricas entre as interfaces utilizadas, foi necessáio projetar um dispositivo que permitisse o ajuste dos niveis de tensão entre os sinais. Osistema foi elaborado visando sua utilização por programas desenvolvidos pelos usuários em ambiente Windows, sendo disponibilizadas rotinas para envio e recebimento de dados através de um protocolo próprio. Na plataforma PC as rotinas estão encapsuladas em um arquivo compilado no formato DDL (Dynamic Link Library). No controlador do robô as rotinas foram criadas em linguagem ABB RAPID. O programa desenvolvido pelo usuário é responsável por todo o processamento das informações, que são então enviadas através do sistema de comunicação a um outro programa específico sendo executado no controlador do robô, o qual interpreta os dados e ativa as tarefas correspondentes. Os resultados obtidos foram satisfatórios, sendo a velocidade de transmissão limitada pela velocidade da Placa E/S do robô. Utilizando-se uma placa ABB DSQC 223, atingiram taxas de transmissão da ordem de 12,5 bytes/s para envio e 6,1 bytes/s para o recbimento de informaçãoes a partir do PC. O sistema demonstrou ser uma alternativa viável para o controle do robô através de um microcomputador PC, apresentando boa confiabilidade, baixo custo e faciliadade de implementação.

Crescimento, produção e qualidade de frutos da bananeira 'Figo cinza', em Botucatu-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlaçôes fenotípicas entre características de produção e crescimento em genótipos de bananeira

The correlations between the characters seen in experimental trials are generated by genetic and environmental factors and are estimated for the purpose of measuring the change in a character when the selection is practised in another. The objective was to correlate bunch weight with characteristics of growth and production of 4 genomic groups of banana: 'Nanicao-IAC-2001', 'Grand Naine', 'Caipira' and 'Nam' ( AAA); 'Ma a', 'Thap Maeo', 'Prata Ana' and 'Prata Zulu' (AAB), 'Fhia 01', 'Fhia 18', 'Prata Grauda' and 'Maca Tropical' (AAAB) and 'Figo Cinza' (ABB), Botucatu, Brazil. Some growth characteristics were evaluated such as: plant heights, the pseudostem circumference, number of leaves, number of days between planting and flowering, number of days between flowering and harvest and number of days from planting to harvest. These characteristics were measured at the flowering time. The production characteristics such as the bunch weigth, number of fruits, average weigth of the fruits, productivity, number of hands and weight, number, length and diameter of the fruits of the 2(nd) hand. The correlations between the characteristics studied varied for each genotype, but they all showed significant correlation between the bunch weight and the characteristics fruit weigth and productivity. The correlations involving all genotypes were predominantly positive and significant.

Taurine bromamine: A potent oxidant of tryptophan residues in albumin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)