Target integration and the attentional blink

If people monitor a visual stimulus stream for targets they often miss the second (T2) if it appears soon after the first (T1)-the attentional blink. There is one exception: T2 is often not missed if it appears right after T1, i.e., at lag 1. This lag-l sparing is commonly attributed to the possibility that T1 processing opens an attentional gate, which may be so sluggish that an early T2 can slip in before it closes. We investigated why the gate may close and exclude further stimuli from processing. We compared a control approach, which assumes that gate closing is exogenously triggered by the appearance of nontargets, and an integration approach, which assumes that gate closing is under endogenous control. As predicted by the latter but not the former, T2 performance and target reversals were strongly affected by the temporal distance between T1 and T2, whereas the presence or the absence of a nontarget intervening between T1 and T2 had little impact. (c) 2005 Elsevier B.V. All rights reserved.

Evolution in software systems: foundations of the SPE classification scheme

The SPE taxonomy of evolving software systems, first proposed by Lehman in 1980, is re-examined in this work. The primary concepts of software evolution are related to generic theories of evolution, particularly Dawkins' concept of a replicator, to the hermeneutic tradition in philosophy and to Kuhn's concept of paradigm. These concepts provide the foundations that are needed for understanding the phenomenon of software evolution and for refining the definitions of the SPE categories. In particular, this work argues that a software system should be defined as of type P if its controlling stakeholders have made a strategic decision that the system must comply with a single paradigm in its representation of domain knowledge. The proposed refinement of SPE is expected to provide a more productive basis for developing testable hypotheses and models about possible differences in the evolution of E- and P-type systems than is provided by the original scheme. Copyright (C) 2005 John Wiley & Sons, Ltd.

Dynamic recurrent neural network for system identification and control

A dynamic recurrent neural network (DRNN) that can be viewed as a generalisation of the Hopfield neural network is proposed to identify and control a class of control affine systems. In this approach, the identified network is used in the context of the differential geometric control to synthesise a state feedback that cancels the nonlinear terms of the plant yielding a linear plant which can then be controlled using a standard PID controller.

Multiple diversity measures to identify complementary conservation areas for the Baja California peninsular cacti

The Baja California Peninsula is home to 85 species of cacti, of which 54 are endemic, highlighting its importance as a cactus diverse region within Mexico. Many species are under threat due to collection pressure and habitat loss, but ensuring maximal protection of cacti species requires a better understanding of diversity patterns. We assessed species richness, endemism, and phylogenetic and morphological diversity using herbarium records and a molecular phylogeny for 82 species of cacti found in the peninsula. The four diversity measures were estimated for the existing nature reserve network and for 314 hexagrids of 726 km2. Using the hexagrid data, we surveyed our results for areas that best complement the current protected cacti diversity in the Baja California Peninsula. Currently, the natural reserve network in Baja shelters an important amount of the cacti diversity (74% of the species, 85.9% of the phylogenetic diversity, 76% of endemics and all the growth forms). While species richness produced several solutions to complement the diversity protected, by identifying priority species (endemic species with high contribution to overall PD) one best solution is reported. Three areas (San Matías, Magdalena and Margarita Islands and El Triunfo), selected using species richness, PD and endemism, best complement the diversity currently protected, increasing species richness to 89%, PD to 94% and endemism to 89%, and should be considered in future conservation plans. Two of these areas could be included within nature reserves already established.

Influence of the APOC3 −2854T>G polymorphism on plasma lipid levels: effect of age and gender

The APOC3 −2854T>G polymorphism lies in the APOC3–A4 intergenic region. In a group of healthy adults, this polymorphism was associated with circulating triglycerides, with 55% lower fasting levels in the homozygous wild-type (TT) compared to the homozygous rare allele (GG) genotype. Age and gender had a significant impact on genotype–triglyceride interactions.

Particle image velocimetry measurements of turbulent flow within outdoor and indoor urban scale models and flushing motions in urban canopy layers

We investigate the spatial characteristics of urban-like canopy flow by applying particle image velocimetry (PIV) to atmospheric turbulence. The study site was a Comprehensive Outdoor Scale MOdel (COSMO) experiment for urban climate in Japan. The PIV system captured the two-dimensional flow field within the canopy layer continuously for an hour with a sampling frequency of 30 Hz, thereby providing reliable outdoor turbulence statistics. PIV measurements in a wind-tunnel facility using similar roughness geometry, but with a lower sampling frequency of 4 Hz, were also done for comparison. The turbulent momentum flux from COSMO, and the wind tunnel showed similar values and distributions when scaled using friction velocity. Some different characteristics between outdoor and indoor flow fields were mainly caused by the larger fluctuations in wind direction for the atmospheric turbulence. The focus of the analysis is on a variety of instantaneous turbulent flow structures. One remarkable flow structure is termed 'flushing', that is, a large-scale upward motion prevailing across the whole vertical cross-section of a building gap. This is observed intermittently, whereby tracer particles are flushed vertically out from the canopy layer. Flushing phenomena are also observed in the wind tunnel where there is neither thermal stratification nor outer-layer turbulence. It is suggested that flushing phenomena are correlated with the passing of large-scale low-momentum regions above the canopy.

The precipitation climate of Central Asia: intercomparison of observational and numerical data sources in a remote semiarid region

In this study, we systematically compare a wide range of observational and numerical precipitation datasets for Central Asia. Data considered include two re-analyses, three datasets based on direct observations, and the output of a regional climate model simulation driven by a global re-analysis. These are validated and intercompared with respect to their ability to represent the Central Asian precipitation climate. In each of the datasets, we consider the mean spatial distribution and the seasonal cycle of precipitation, the amplitude of interannual variability, the representation of individual yearly anomalies, the precipitation sensitivity (i.e. the response to wet and dry conditions), and the temporal homogeneity of precipitation. Additionally, we carried out part of these analyses for datasets available in real time. The mutual agreement between the observations is used as an indication of how far these data can be used for validating precipitation data from other sources. In particular, we show that the observations usually agree qualitatively on anomalies in individual years while it is not always possible to use them for the quantitative validation of the amplitude of interannual variability. The regional climate model is capable of improving the spatial distribution of precipitation. At the same time, it strongly underestimates summer precipitation and its variability, while interannual variations are well represented during the other seasons, in particular in the Central Asian mountains during winter and spring

A genetic linkage map of an apple rootstock progeny anchored to the Malus genome sequence

An apple rootstock progeny raised from the cross between the very dwarfing ‘M.27’ and the more vigorous ‘M.116’ (‘M.M.106’ × ‘M.27’) was used for the construction of a linkage map comprising a total of 324 loci: 252 previously mapped SSRs, 71 newly characterised or previously unmapped SSR loci (including 36 amplified by 33 out of the 35 novel markers reported here), and the self-incompatibility locus. The map spanned the 17 linkage groups (LG) expected for apple covering a genetic distance of 1,229.5 cM, an estimated 91% of the Malus genome. Linkage groups were well populated and, although marker density ranged from 2.3 to 6.2 cM/SSR, just 15 gaps of more than 15 cM were observed. Moreover, only 17.5% of markers displayed segregation distortion and, unsurprisingly in a semi-compatible backcross, distortion was particularly pronounced surrounding the self-incompatibility locus (S) at the bottom of LG17. DNA sequences of 273 SSR markers and the S locus, representing a total of 314 loci in this investigation, were used to anchor to the ‘Golden Delicious’ genome sequence. More than 260 of these loci were located on the expected pseudo-chromosome on the ‘Golden Delicious’ genome or on its homeologous pseudo-chromosome. In total, 282.4 Mbp of sequence from 142 genome sequence scaffolds of the Malus genome were anchored to the ‘M.27’ × ‘M.116’ map, providing an interface between the marker data and the underlying genome sequence. This will be exploited for the identification of genes responsible for traits of agronomic importance such as dwarfing and water use efficiency.

Data assimilation for state and parameter estimation: application to morphodynamic modelling

Data assimilation is predominantly used for state estimation; combining observational data with model predictions to produce an updated model state that most accurately approximates the true system state whilst keeping the model parameters fixed. This updated model state is then used to initiate the next model forecast. Even with perfect initial data, inaccurate model parameters will lead to the growth of prediction errors. To generate reliable forecasts we need good estimates of both the current system state and the model parameters. This paper presents research into data assimilation methods for morphodynamic model state and parameter estimation. First, we focus on state estimation and describe implementation of a three dimensional variational(3D-Var) data assimilation scheme in a simple 2D morphodynamic model of Morecambe Bay, UK. The assimilation of observations of bathymetry derived from SAR satellite imagery and a ship-borne survey is shown to significantly improve the predictive capability of the model over a 2 year run. Here, the model parameters are set by manual calibration; this is laborious and is found to produce different parameter values depending on the type and coverage of the validation dataset. The second part of this paper considers the problem of model parameter estimation in more detail. We explain how, by employing the technique of state augmentation, it is possible to use data assimilation to estimate uncertain model parameters concurrently with the model state. This approach removes inefficiencies associated with manual calibration and enables more effective use of observational data. We outline the development of a novel hybrid sequential 3D-Var data assimilation algorithm for joint state-parameter estimation and demonstrate its efficacy using an idealised 1D sediment transport model. The results of this study are extremely positive and suggest that there is great potential for the use of data assimilation-based state-parameter estimation in coastal morphodynamic modelling.