牛胚胎在BRL/mTCM199和HECM-6/mTCM199培养体系中发育潜能的探讨

将受精卵置于下列两种培养体系中进行体外培养:(1)Buffalo rat liver细胞与改进的TCM199培养液共同培养系统(BRL/mTCM199);(2)半确定培养液两步培养系统[无血清的金黄地鼠培养液与改进的TCM199培养液(HECM-6/mTCM199]。结果表明:后者的囊胚率(50%)明显高于前者的囊胚率(41%,P<0.01)。表明牛胚胎早期分裂可在无蛋白培养条件下进行,并且在此培养条件下有良好的后续发育能力。这可能与两步培养体系中葡萄糖和氨基酸浓度不同有关。

Active wavelength control of tunable lasers for use in Un cooled WDM systems

It is shown for the first time that uncooled tunable DBR-laser diodes can be used as athermal WDM sources. Using novel bias current control, absolute wavelength control to within 6Å has been achieved for temperatures up to 70°C. © 2000 Optical Society of America.

Seminario sobre ciencias básicas como prerequisito para la enseñanza de la oceanografía (1-2 octubre de 1962)- Seminario sobre biogeografía de los organismos marinos (3-6 octubre de 1962)

Por acuerdo del Seminario Latinoamericano sobre Estudios Oceanográficos realizado en la Universidad de Concepción, Chile, 20-25 noviembre de 1961, se recomendó la realización en Argentina de un Seminario sobre Biogeografía de Organismos Marinos, indicándose al Museo Argentino de Ciencias Naturales Bernardino Rivadavia como sede del mismo. Luego de varias conversaciones en Buenos Aires (Argentina), entre autoridades del Centro de Cooperación Científica para América Latina, del CONICET (Consejo Nacional de Investigaciones Científicas y Técnicas), del Servicio de Hidrografía Naval, del mencionado Museo y del Instituto de Biología Marina de Mar del Plata, se acordó realizar los seminarios en éste último instituto del 1 al 6 octubre de 1962. Del 1 al 2 de octubre, se realizó el Seminario sobre Ciencias Básicas como prerrequisito para la Enseñanza de la Oceanografía, pero los documentos no fueron incluídos en este Boletín. Del 3 al 6 de octubre, tuvo lugar el Seminario sobre Biogeografía de Organismos Marinos, con la participación de investigadores de: Brasil, Colombia, Costa Rica, Chile, Mexico, Perú, Uruguay, Venezuela y de Argentina, y se incluyeron los siguientes trabajos publicados: Joly, A. - Extensao da flora marinha no sul do Brasil- nota preliminar; Etcheverry Daza, H. - Distribución geográfica de las algas del Pacífico; Diaz-Piferrer, M. - Biogeografía de las algas marinas tropicales de la costa Atlántica de America, Resumen,; Kuhneman, O. - Importancia de la vegetación en biogeografía marina; Boschi, E.E. - Los peneidos de Brasil, Uruguay y Argentina; Bernasconi, I. - Distribución geográfica de los equinoideos y asteroideos de la extremidad austral de Sudamérica; Szidat, L. - La parasitología como ciencia auxiliar para la biogeografía de organismos marinos; López, R.B. - Problemas de la distribución geográfica de los peces marinos sudamericanos; Ximénez, I. - Estudio preliminar de la distribución geográfica actual de los pinípedos en América Latina; Balech, E. - La división zonal en biología marina y su nomenclatura; Stuardo, J. - Distribución de los moluscos marinos litorales en Latinoamérica; Boltovskoy, E. - Provincias zoogeográficas de América del Sur y su sector Antártico según los foraminíferos bentónicos; Rioja, E. - Caracteres de la biogeografía marina de México y de Centro América; Balech, E. - Caracteres biogeográficos de la región de Argentina y Uruguay; Vannucci, M. - Zoogeografía marinha do Brasil.

Mode-locked and single-longitudinal-mode waveguide lasers fabricated by femtosecond laser pulses in Er:Yb-doped phosphate glass

Mode-locked and single-longitudinal-mode waveguide lasers, manufactured by femtosecond laser writing in Er-Yb-doped phosphate glasses, are presented. Transform-limited 1.6-ps pulses and a cw output power exceeding 50 mW have been obtained in the two regimes. © 2007 Optical Society of America.

基于部分线粒体细胞色素氧化酶亚基Ⅰ(mtCOI)DNA 序列的6种蝙蝠(翼手目:蝙蝠科)的分子系统进化关系

对贵州5种蝙蝠科蝙蝠的部分线粒体细胞色素氧化酶亚基Ⅰ DNA序列进行了测定,并结合从Genbank获得的爪哇伏翼的相应序列,以Pteropus dasymallus,P.scapulatus,Rousettus aegyptiacus为外群,运用贝叶斯法(Bayesian),最大似然法(Maximum Likelihood,ML)分析了这6种蝙蝠科蝙蝠的分子系统进化关系.结果表明:在贝叶斯,ML树中,这6种蝙蝠科的蝙蝠可分为3个分支:亚洲长翼蝠是第1个独立出来的分支;白腹管鼻蝠是继亚洲长翼蝠之后第2个分离出来的分支;第3个分支又分为两支,一支由大鼠耳蝠和小鼠耳蝠组成,另一支由南蝠和爪哇伏翼组成,支持将这4种蝙蝠同归于蝙蝠亚科的结论,从一定程度上否定了鼠耳蝠属和管鼻蝠亚科之间的姐妹类群关系,也不支持将鼠耳属提升为亚科.

Regenerative polymeric bus architecture for board-level optical interconnects

A scalable multi-channel optical regenerative bus architecture based on the use of polymer waveguides is presented for the first time. The architecture offers high-speed interconnection between electrical cards allowing regenerative bus extension with multiple segments and therefore connection of an arbitrary number of cards onto the bus. In a proof-ofprinciple demonstration, a 4-channel 3-card polymeric bus module is designed and fabricated on standard FR4 substrates. Low insertion losses (≤ -15 dB) and low crosstalk values (< -30 dB) are achieved for the fabricated samples while better than ± 6 μm -1 dB alignment tolerances are obtained. 10 Gb/s data communication with a bit-error-rate (BER) lower than 10-12 is demonstrated for the first time between card interfaces on two different bus modules using a prototype 3R regenerator. © 2012 Optical Society of America.

Micromachining of glassy carbon toolsets for micro embossing applications

Laser micro machining is fast gaining popularity as a method of fabricating micro scale structures. Lasers have been utilised for micro structuring of metals, ceramics and glass composites and with advances in material science, new materials are being developed for micro/nano products used in medical, optical, and chemical industries. Due to its favourable strength to weight ratio and extreme resistance to chemical attack, glassy carbon is a new material that offers many unique properties for micro devices. The laser machining of SIGRADUR® G grade glassy carbon was characterised using a 1065 nm wavelength Ytterbium doped pulsed fiber laser. The laser system has a selection of 25 preset waveforms with optimised peak powers for different pulsing frequencies. The optics provide spot diameter of 40 μm at the focus. The effect of fluence, transverse overlap and pulsing frequency (as waveform) on glassy carbon was investigated. Depth of removal and surface roughness were measured as machining quality indicators. The damage threshold fluence was determined to be 0.29 J/cm2 using a pulsing frequency of 250 kHz and a pulse width of 18 ns (waveform 3). Ablation rates of 17 < V < 300 μm3/pulse were observed within a fluence range of 0.98 < F < 2.98 J/cm2. For the same fluence variation, 0.6 μm to 6.8 μm deep trenches were machined. Trench widths varied from 29 μm at lower fluence to 47 μm at the higher fluence. Square pockets, 1 mm wide, were machined to understand the surface machining or milling. The depth of removal using both waveform 3 and 5 showed positive correlation with fluence, with waveform 5 causing more removal than waveform 3 for the same fluence. Machined depths varied from less than 1 μm to nearly 40 μm. For transverse overlap variation using waveform 3, the best surface finish with Rz = 1.1 μm was obtained for fluence 0.792 J/cm2 for transverse overlap of 1 μm, 6 μm, and 9 μm at machined depths of 22.9 μm, 6.6 μm, and 4.6 μm respectively. For fluence of 1.426 J/cm2, the best surface finish with Rz = 1.2 μm was obtained for transverse overlap of 6 μm, and 9 μm at machined depths of 12.46 μm, and 8.6 μm respectively. The experimental data was compiled as machining charts and utilised for fabricating a micro-embossing glassy carbon master toolsets as a capability demonstration.

Tests for conceptual design of 6.6 kV class superconducting fault current limiter with YBCO thin film elements

A superconducting fault current limiter (SFCL) for 6.6 kV and 400 A installed in a cubicle for a distribution network substation was conceptually designed. The SFCL consists of parallel- and series-connected superconducting YBCO elements and a limiting resistor. Before designing the SFCL, some tests were carried out. The width and length of each element used in the tests are 30 mm and 210 mm, respectively. The element consists of YBCO thin film of about 200 nm in thickness on cerium dioxide (CeO2) as a cap-layer on a sapphire substrate by metal-organic deposition with a protective metal coat. In the tests, characteristics of each element, such as over-current, withstand-voltage, and so on, were obtained. From these characteristics, series and parallel connections of the elements, called units, were considered. The characteristics of the units were obtained by tests. From the test results, a single phase prototype SFCL was manufactured and tested. Thus, an SFCL rated at 6.6 kV and 400 A can be designed. © 2009 IEEE.