乙酰化聚酚氧线性大分子的合成与表征

根据反应物的不同配比 ,用乙酰基不同程度地取代了聚酚氧大分子侧链上的羟基 ,得到了不同酰化程度的聚酚氧 ,用NMR及FTIR谱图对合成的乙酰化聚酚氧进行了定量 ,并用FTIR、DSC对其分子间氢键的强弱进行了研究 ,用DSC对系列酰化聚酚氧进行了表征 ,结果表明改性聚酚氧中的特殊相互作用主要来自羟基.

Displacement and luminescence of Eu3+ in CaYBO4

CaY1-xBO4: xEu was synthesied by solid state reaction method, and the displacement and luminescence of the Eu3+ in CaYBO4 host were studied. Two luminescent centers could be observed at certain Eu3+-concentration, indicating that the Eu3+ occupies two different crystallographic sites. This result shows that the Eu3+ occupies two different Y3+ sites in CaYBO4. The investigation on Eu-O charge transfer bands indicates that the larger distortion or the lower symmetry of Eu3+ site is,the shorter wavelength of the Eu-O charge transfer band is. When the Eu3+-concentration is high (x > 0.10), Eu3+ occupies the sites of Ca2+ and is reduced to Eu2+.

Low-temperature oxidation of methane to form formaldehyde: role of Fe and Mo on Fe-Mo/SiO2 catalysts, and their synergistic effects

The partial oxidation of methane with molecular oxygen was performed on Fe-Mo/SiO2 catalysts. Iron was loaded on the Mo/SiO2 catalyst by chemical vapor deposition of Fe-3(CO)(12). The catalyst showed good low-temperature activities at 723-823 K. Formaldehyde was a major condensable liquid product on the prepared catalyst. There were synergistic effects between iron and molybdenum in Fe-Mo/SiO2 catalysts for the production of formaldehyde from the methane partial oxidation. The activation energy of Mo/SiO2 decreased with the addition of iron and approached that of the Fe/SiO2. The concentration of isolated molybdenum species (the peak at 1148 K in TPR experiments) decreased as the ion concentration increased and had a linear relationship with the selectivity of methane to formaldehyde. The role of Fe and Mo in the Fe-Mo/SiO2 catalyst was proposed: Fe is the center for the C-H activation to generate reaction intermediates, and Mo is the one for the transformation of intermediates into formaldehyde. Those phenomena were predominant below 775 K.

Capacitive detection of glucose using molecularly imprinted polymers

A novel glucose biosensor based on capacitive detection has been developed using molecularly imprinted polymers. The sensitive layer was prepared by electropolymerization of o-phenylenediamine on a gold electrode in the presence of the template (glucose). Cyclic voltammetry and capacitive measurements monitored the process of electropolymerization. Surface uncovered areas were plugged with 1-dodecanethiol to make the layer dense, and the insulating properties of the layer were studied in the presence of redox couples. The template molecules and the nonbound thiol were removed from the modified electrode surface by washing with distilled water. A capacitance decrease could be obtained after injection of glucose. The electrode constructed similarly but with ascorbic acid or fructose only showed a small response compared with glucose. The stability and reproducibility of the biosensor were also investigated. (C) 2001 Elsevier Science B.V. All rights reserved.

碳酸乙烯酯(EC)增塑的(PEO)_(16)LiClO_4聚电解质电导率的研究

采用差示扫描量热法 (DSC)和交流阻抗方法对EC增塑的 (PEO) 16 LiClO4 聚电解质进行了研究。结果表明 (PEO) 16 LiClO4 /EC体系的玻璃化转变温度 (tg)及PEO的结晶度 (Xc)降低 ,电导率 (б)增加 ,且б与温度 (T)的关系符合Arrhenius行为。提出了离子导电聚电解质 /不锈钢 (SS)这种结构的界面双层结构和交流阻抗谱图的模拟等效电路

Fluorescence spectra of hemorrhagin III from the snake venom of Agkistrodon acutus

Hemorrhagin III (AaH III) was separated and purified from the crude snake venom of Agkistrodon acutus, and its molecule weight was determined accurately to be 23; 284.4 +/- 0.1 by LDI1700-MALDI-TOF-MS. Emission spectra of AaH III showed that Trp residues were located by a great degree in the hydrophobic area. Addition of SDS and guanidine-HCl led to change of the molecular conformation of AaH III, and caused the fluorescence quenching of Trp residues. The red-shifted emission band of AaH III after adding guanidine-HCl showed that Trp residues exposed in polar solvents. The effects of pH, EDTA and metal ions on the fluorescence spectra of AaH III were also investigated.

Superlattice structure of gold nanoparticles film deposited by Langmuir-Blodgett technique

Dodecanethiol-capped gold nanoparticles could spread on water subphase and be transferred by LB technique. The superlattice structure of gold nanoparticles multilayer was discussed.

Photochromism in CaS : Sm

The photochromism in CaS:Sm (from white to pink) was observed for the first time by exposing it to ultraviolet light. The experiments results show that the absorption intensity of Sm2+ in the range of 500 similar to 600nm was strongly increased after irradiation. This reveals that there is the valence changing of Sm. If the sample was excited by visible light again, the pink color turned to white, indicating that CaS:Sm has potential application in the field of storage material.

Nuclear magnetic resonance spectral assignments of 2,2 '-bis(p-aminobenzoic ester)-1,1 '-binaphthyl

H-1 and C-13 nuclear magnetic resonance (NMR) spectra of 2, 2'-bis(p-aminobenzoic ester)-1,1'-binaphthyl were assigned and confirmed using 2D H-1-H-1 COSY, C-13-H-1 HETCOR and C-13-H-1 long-range HETCOR methods. This provided a basis for NMR characterization of the similar compounds.

2,2'-二(对胺苯甲酯)-1,1'联萘的核磁共振谱解析

利用~1HNMR,~(13)CNMR谱研究了2,2’-二(对胺苯甲酯)-1,1’联萘的结构,并通过~1H-~1HCOSY,~(13)C-~1H异核相关及~(13)C-~1H异核远程相关谱进一步地确定了~1H谱和~(13)C谱中各谱峰的归属,为同类化合物的表征提供了一个依据.

Synthesis and characterization of (phenolphthalein/4,4 '-thiodiphenol) PES copolymers

Copolymers based on monomers phenolphthalein (PP)/4,4'-thiodiphenol (Bis-T)/4,4'-dichlorodiphenylsulfone (DCDPS) were prepared by a route involving the toluene, N-methyl-2-pyrrolidone and anhydrous potassium carbonate synthesis. The range of optimum reaction temperature was between 185 and 195 degrees C. The copolymers were characterized by C-13 NMR, differential scanning calorimetry (DSC) and torsion braid analysis. It was found that all of the copolymers were random and homogeneous and their glass transition temperatures (T-g) decreased linearly with an increase of Bis-T contents in the copolymers. The thermal stability determined by thermogravimetry analysis in air atmosphere indicated that the copolymer had better resistance to thermo-oxidative degradation. Dynamic mechanical measurement showed that (PP/Bis-T) PES copolymers containing 0-50 mol% of Bis-T components had two secondary relaxations. (C) 1998 Elsevier Science Ltd. All rights reserved.

Crystallization of syndiotactic polypropylene (sPP) from oriented melts

The influence of the syndiotacticity on the crystallization behaviour of syndiotactic polypropylene (sPP) has been investigated. The syndiotacticity has been measured by C-13-NMR spectroscopy and the phase formation has been observed by electron diffraction of oriented samples. It is shown that the crystal phase formation depends strongly on the perfection of the tacticity of the macromolecules.

一种无机高分子——聚硅烷

综述介绍聚硅烷的合成方法及其电子结构、分子结构、微观结构和聚集态结构等。重点介绍聚硅烷的分子链间的交联反应及其在非氧化硅陶瓷制备方面的应用,聚硅烷用来制备陶瓷/金属复合材料,聚硅烷的光化学性质及其作为显微光刻材料在微电子中的应用,以及作为光电子器件中的波导介质等。

交替马来酸酐共聚物多缩乙二醇酯盐络合物的离子传导性（Ⅲ）

研究了交替马来酸酐共聚物多缩乙二醇酯（ＢＭ３５０）－ＬｉＢＦ４络合物的离子传导性能．实验表明：络合物的侧链玻璃化转变温度随盐含量的增加而上升电导率随盐浓度的变比而出现一极大值室温电导率最大可达４１９×１０－５Ｓ·ｃｍ－１．电导率随温度升高而增加．络合物的导电行为符合ＶＴＦ方程．无定形相中分子链热运动是离子传输的动力。