991 resultados para solid dosage form


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 μm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (>200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m3).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2014

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aims: Plasma concentrations of imatinib differ largely between patients despite same dosage, owing to large inter-individual variability in pharmacokinetic (PK) parameters. As the drug concentration at the end of the dosage interval (Cmin) correlates with treatment response and tolerability, monitoring of Cmin is suggested for therapeutic drug monitoring (TDM) of imatinib. Due to logistic difficulties, random sampling during the dosage interval is however often performed in clinical practice, thus rendering the respective results not informative regarding Cmin values.Objectives: (I) To extrapolate randomly measured imatinib concentrations to more informative Cmin using classical Bayesian forecasting. (II) To extend the classical Bayesian method to account for correlation between PK parameters. (III) To evaluate the predictive performance of both methods.Methods: 31 paired blood samples (random and trough levels) were obtained from 19 cancer patients under imatinib. Two Bayesian maximum a posteriori (MAP) methods were implemented: (A) a classical method ignoring correlation between PK parameters, and (B) an extended one accounting for correlation. Both methods were applied to estimate individual PK parameters, conditional on random observations and covariate-adjusted priors from a population PK model. The PK parameter estimates were used to calculate trough levels. Relative prediction errors (PE) were analyzed to evaluate accuracy (one-sample t-test) and to compare precision between the methods (F-test to compare variances).Results: Both Bayesian MAP methods allowed non-biased predictions of individual Cmin compared to observations: (A) - 7% mean PE (CI95% - 18 to 4 %, p = 0.15) and (B) - 4% mean PE (CI95% - 18 to 10 %, p = 0.69). Relative standard deviations of actual observations from predictions were 22% (A) and 30% (B), i.e. comparable to the intraindividual variability reported. Precision was not improved by taking into account correlation between PK parameters (p = 0.22).Conclusion: Clinical interpretation of randomly measured imatinib concentrations can be assisted by Bayesian extrapolation to maximum likelihood Cmin. Classical Bayesian estimation can be applied for TDM without the need to include correlation between PK parameters. Both methods could be adapted in the future to evaluate other individual pharmacokinetic measures correlated to clinical outcomes, such as area under the curve(AUC).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2014

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We assessed the impact of antiviral prophylaxis and preemptive therapy on the incidence and outcomes of cytomegalovirus (CMV) disease in a nationwide prospective cohort of solid organ transplant recipients. Risk factors associated with CMV disease and graft failure-free survival were analyzed using Cox regression models. One thousand two hundred thirty-nine patients transplanted from May 2008 until March 2011 were included; 466 (38%) patients received CMV prophylaxis and 522 (42%) patients were managed preemptively. Overall incidence of CMV disease was 6.05% and was linked to CMV serostatus (D+/R- vs. R+, hazard ratio [HR] 5.36 [95% CI 3.14-9.14], pâeuro0/00<âeuro0/000.001). No difference in the incidence of CMV disease was observed in patients receiving antiviral prophylaxis as compared to the preemptive approach (HR 1.16 [95% CI 0.63-2.17], pâeuro0/00=âeuro0/000.63). CMV disease was not associated with a lower graft failure-free survival (HR 1.27 [95% CI 0.64-2.53], pâeuro0/00=âeuro0/000.50). Nevertheless, patients followed by the preemptive approach had an inferior graft failure-free survival after a median of 1.05 years of follow-up (HR 1.63 [95% CI 1.01-2.64], pâeuro0/00=âeuro0/000.044). The incidence of CMV disease in this cohort was low and not influenced by the preventive strategy used. However, patients on CMV prophylaxis were more likely to be free from graft failure.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Remorins form a superfamily of plant-specific plasma membrane/lipid-raft-associated proteins of unknown structure and function. Using specific antibodies, we localized tomato remorin 1 to apical tissues, leaf primordia and vascular traces. The deduced remorin protein sequence contains a predicted coiled coil-domain, suggesting its participation in protein-protein interactions. Circular dichroism revealed that recombinant potato remorin contains an alpha-helical region that forms a functional coiled-coil domain. Electron microscopy of purified preparations of four different recombinant remorins, one from potato, two divergent isologs from tomato, and one from Arabidopsis thaliana , demonstrated that the proteins form highly similar filamentous structures. The diameters of the negatively-stained filaments ranged from 4.6-7.4 nm for potato remorin 1, 4.3-6.2 nm for tomato remorin 1, 5.7-7.5 nm for tomato remorin 2, and 5.7-8.0 nm for Arabidopsis Dbp. Highly polymerized remorin 1 was detected in glutaraldehyde-crosslinked tomato plasma membrane preparations and a population of the protein was immunolocalized in tomato root tips to structures associated with discrete regions of the plasma membrane.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Suicide by self-poisoning is rather common around the world. This paper presents an exceptional complex suicide in which nicotine was applied in the form of self-made patches soaked with an extraction from fine-cut tobacco. In addition, the 51-year-old suicide victim took a lethal dose of diphenhydramine. Toxicological analysis also revealed the presence of tetrazepam in subtherapeutic concentrations. The scene of death suggested an autoerotic accident at first, as the body was tied with tapes, cables and handcuffs. As a result of the entire investigations, the fatality had to be classified as a suicidal intoxication by nicotine and diphenhydramine.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The main goal of this special issue was to gather contributions dealing with the latest breakthrough methods for providing value compounds and energy/fuel from waste valorization. Valorization is a relatively new approach in the area of industrial wastes management, a key issue to promote sustainable development. In this field, the recovery of value-added substances, such as antioxidants, proteins, vitamins, and so forth, from the processing of agroindustrial byproducts, is worth mentioning. Another important valorization approach is the use of biogas from waste treatment plants for the production of energy. Several approaches involving physical and chemical processes, thermal and biological processes that ensure reduced emissions and energy consumptions were taken into account. The papers selected for this topical issue represent some of the mostly researched methods that currently promote the valorization of wastes to energy and useful materials ...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The performance of magnetic nanoparticles is intimately entwined with their structure, mean size and magnetic anisotropy. Besides, ensembles offer a unique way of engineering the magnetic response by modifying the strength of the dipolar interactions between particles. Here we report on an experimental and theoretical analysis of magnetic hyperthermia, a rapidly developing technique in medical research and oncology. Experimentally, we demonstrate that single-domain cubic iron oxide particles resembling bacterial magnetosomes have superior magnetic heating efficiency compared to spherical particles of similar sizes. Monte Carlo simulations at the atomic level corroborate the larger anisotropy of the cubic particles in comparison with the spherical ones, thus evidencing the beneficial role of surface anisotropy in the improved heating power. Moreover we establish a quantitative link between the particle assembling, the interactions and the heating properties. This knowledge opens new perspectives for improved hyperthermia, an alternative to conventional cancer therapies.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

BACKGROUND: The burden of enterococcal infections has increased over the last decades with vancomycin-resistant enterococci (VRE) being a major health problem. Solid organ transplantation is considered as a risk factor. However, little is known about the relevance of enterococci in solid organ transplantation recipients in areas with a low VRE prevalence. METHODS: We examined the epidemiology of enterococcal events in patients followed in the Swiss Transplant Cohort Study between May 2008 and September 2011 and analyzed risk factors for infection, aminopenicillin resistance, treatment, and outcome. RESULTS: Of the 1234 patients, 255 (20.7%) suffered from 392 enterococcal events (185 [47.2%] infections, 205 [52.3%] colonizations, and 2 events with missing clinical information). Only 2 isolates were VRE. The highest infection rates were found early after liver transplantation (0.24/person-year) consisting in 58.6% of Enterococcus faecium. The highest colonization rates were documented in lung transplant recipients (0.33/person-year), with 46.5% E. faecium. Age, prophylaxis with a betalactam antibiotic, and liver transplantation were significantly associated with infection. Previous antibiotic treatment, intensive care unit stay, and lung transplantation were associated with aminopenicillin resistance. Only 4/205 (2%) colonization events led to an infection. Adequate treatment did not affect microbiological clearance rates. Overall mortality was 8%; no deaths were attributable to enterococcal events. CONCLUSIONS: Enterococcal colonizations and infections are frequent in transplant recipients. Progression from colonization to infection is rare. Therefore, antibiotic treatment should be used restrictively in colonization. No increased mortality because of enterococcal infection was noted.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Audit report on the Pocahontas County Solid Waste Commission for the year ended June 30, 2014

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Audit report on the Crawford County Area Solid Waste Agency Commission for the year ended June 30, 2014

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Campomelic dysplasia is a skeletal dysplasia characterized by flat face, Pierre Robin sequence, shortening and bowing of long bones and club feet. The authors describe a case of "acampomelic" campomelic dysplasia that differs from classical campomelic dysplasia by the absence of bone bowing. This condition is among the most common skeletal dysplasias but is often misdiagnosed in the absence of overt campomelia.