Avaliação das propriedades nanomecânicas e do comportamento micromecânico da interface dentina/adesivo antes e após a degradação hidrolítica: análises através de nanoindentação e método dos elementos finitos tridimensional

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da sensibilidade dos componentes da equação de Hargreaves - Samani para a região de Bebedouro - SP

The estimation of reference evapotranspiration (ETo) subsidizes the calculations of water consumption in irrigated agriculture. The use of simpler methodologies are common however should be carefully studied. The present study evaluated the sensitivity of the Hargreaves -Samani equation compared to the standard Penman-Monteith -FAO to estimate ETo for the climatic conditions of the Bebedouro-SP region, simulating the effects of increasing and decreasing 5 % in the temperatures, resulting in ten different scenarios (PM -Penman-Montheit -FAO; S0 -original Hargreaves Samani; S1 to S8 -modified Hargreaves Samani). The obtained results of sensitivity, linear regression, accuracy and concordance index, were compared. We concluded that the Hargreaves -Samani equation overestimates the monthly values of the ETo in 13% compared to the standard method. A variation of 5% in maximum and minimum temperatures resulted in errors of up to 1 mm day-1 (monthly average) and this increase is more expressive in maximum temperature.

Influência de características físicas e química dos materiais de abutments de implantes em zircônia e titânio na adesão e viabilidade de células epiteliais gengivaiS OBA-9

Pós-graduação em Reabilitação Oral - FOAR

A influência da integração multissensorial na construção do espaço semântico no sistema Kansei de engenharia: um estudo de Design Ergonômico com barbeadores descartáveis

Pós-graduação em Design - FAAC

Análise comparativa da atividade muscular do flexor superficial dos dedos e força de preensão palmar em atividades laborativas de uma indústria

Pós-graduação em Engenharia Mecânica - FEG

Aplicação de modelagem hidrológica associada à análise geoespacial, para caracterização da vazão na micro Central Hidroelétrica Ilha Anchieta - SP

Pós-graduação em Engenharia Mecânica - FEG

Análises, aplicações e validações–numérico/experimentais do modelo SWAN em áreas restritas e ao largo

Pós-graduação em Engenharia Elétrica - FEIS

Influence of Platform and Abutment Angulation on Peri-Implant Bone. A Three-Dimensional Finite Element Stress Analysis

The aim of this study was to evaluate stress distribution on the pen-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm x 5 mm) were created varying the platform (R, regular or S. switching) and the abutments (S, straight or A, angulated 15 degrees). The models were created by using Mimics 13 and Solid Works 2010 software programs. The numerical analysis was performed using ANSYS Workbench 10.0. Oblique forces (100 N) were applied to the palatine surface of the central incisor. The bone/implant interface was considered perfectly integrated. Maximum (sigma(max)) and minimum (sigma(min)) principal stress values were obtained. For the cortical bone the highest stress values (sigma(max)) were observed in the RA (regular platform and angulated abutment, 51 MPa), followed by SA (platform switching and angulated abutment, 44.8 MPa), RS (regular platform and straight abutment, 38.6 MPa) and SS (platform switching and straight abutment, 36.5 MPa). For the trabecular bone, the highest stress values (sigma(max)) were observed in the RA (6.55 MPa), followed by RS (5.88 MPa), SA (5.60 MPa), and SS (4.82 MPa). The regular platform generated higher stress in the cervical periimplant region on the cortical and trabecular bone than the platform switching, irrespective of the abutment used (straight or angulated).

LED light attenuation through human dentin: A first step toward pulp photobiomodulation after cavity preparation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reevaluation of the digestible lysine requirement for broilers based on genetic potential

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Near-Earth asteroid binaries in close encounters with the Earth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Time needed to schedule dermatological consultations in Brazil

BACKGROUND: It is not clear what the population's demand for dermatologists is, nor how many professionals are needed in order to provide adequate care in this area of expertise. Knowledge of the flow of patients at dermatological clinics throughout the country allows for the formation of expansion and distribution policies regarding professionals, and provides backing for the decision to increase medical residency places. OBJECTIVES: To evaluate the time it takes to schedule a private dermatological consultation in Brazil, and other factors concerning consultations. METHODS: Survey with a random sample of 14% of Brazilian dermatologists, simulating the scheduling of emergency clinical and cosmetic consultations, and botulinum toxin procedures. Also, details relating to cost and professionals, were studied. Data were adjusted for each region of the country. RESULTS: A total of 873 dermatologists were evaluated. Full SBD members represented 85%, and 66% were women. The median time to schedule a consultation ranged from 6 (out-of-pocket payment) to 7 (medical insurance) consecutive working days. Times varied depending on the region. A multivariate analysis showed that out-of-pocket consultations and procedures were scheduled sooner than with medical insurance, regardless of whether they were clinical or cosmetic. CONCLUSION: The characteristics of dermatologists are varied throughout regions of the country. Private consultations and procedures are scheduled sooner than with insurance companies.

Efeito do nível e da época de desfolha artificial sobre os componentes de produtividade de cultivares de algodoeiro

The periodic substitution of cotton cultivars for the farms can modify the levels of economic damages and control of pests, compromising the success in pest control. The objective of this work was to evaluate the effect of simulated defoliation levels in cotton cultivars actually used. The assay was carried out in experimental area of the Polo Apta Centro Norte, in Pindorama, Sao Paulo state. There were evaluated four defoliations levels (0%, 36.8%, 62.1% e 100%), done at a unique operation, in tree times (30, 60 and 90 days after plant emergence) and four cotton cultivars (IAC-25, DeltaOpal, Fibermax 966 and Fibermax 993). The defoliation was done with a scissor simulating the caterpillar damage. Evaluations included the number of open bolls, weight of one boll and 100 seeds, fiber percentage and productivity (kg ha(-1)). The defoliation negatively affected all components of agronomic traits, with the exception of percentage of fiber. The most damaging levels were 62.1 and 100% removal of the leaf blade. The period of higher susceptibility to defoliation occurs from 30 to 60 days after plant emergence.

Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex

Purpose: This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon.Materials and Methods: Forty disk-shaped zirconia core (Lava Zirconia, 3M ESPE) (diameter: 3 mm) specimens were veneered circumferentially with a feldspathic veneering ceramic (VM7, Vita Zahnfabrik) (thickness: 2 mm) using a split metal mold. They were then embedded in autopolymerizing acrylic with the bonding surfaces exposed. Specimens were randomly assigned to one of the following surface conditioning protocols (n = 10 per group): group 1, veneer: 4% hydrofluoric acid (HF) (Porcelain Etch) + core: aluminum trioxide (50-mu m Al2O3) + core + veneer: silane (ESPE-Sil); group 2: core: Al2O3 (50 mu m) + veneer: HF + core + veneer: silane; group 3: veneer: HF + core: 30 mu m aluminum trioxide particles coated with silica (30 mu m SiO2) + core + veneer: silane; group 4: core: 30 mu m SiO2 + veneer: HF + core + veneer: silane. Core and veneer ceramic were conditioned individually but no attempt was made to avoid cross contamination of conditioning, simulating the clinical intraoral repair situation. Adhesive resin (VisioBond) was applied to both the core and the veneer ceramic, and resin composite (Quadrant Posterior) was bonded onto both substrates using polyethylene molds and photopolymerized. After thermocycling (6000 cycles, 5 degrees C-55 degrees C), the specimens were subjected to shear bond testing using a universal testing machine (1 mm/min). Failure modes were identified using an optical microscope, and scanning electron microscope images were obtained. Bond strength data (MPa) were analyzed statistically using the non-parametric Kruskal-Wallis test followed by the Wilcoxon rank-sum test and the Bonferroni Holm correction (alpha = 0.05).Results: Group 3 demonstrated significantly higher values (MPa) (8.6 +/- 2.7) than those of the other groups (3.2 +/- 3.1, 3.2 +/- 3, and 3.1 +/- 3.5 for groups 1, 2, and 4, respectively) (p < 0.001). All groups showed exclusively adhesive failure between the repair resin and the core zirconia. The incidence of cohesive failure in the ceramic was highest in group 3 (8 out of 10) compared to the other groups (0/10, 2/10, and 2/10, in groups 1, 2, and 4, respectively). SEM images showed that air abrasion on the zirconia core only also impinged on the veneering ceramic where the etching pattern was affected.Conclusion: Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of the zirconia core / veneering ceramic complex.

Erosion Protection by Calcium Lactate/Sodium Fluoride Rinses under Different Salivary Flows in vitro

This study investigated the effect of a calcium lactate pre-rinse on sodium fluoride protection in an in vitro erosion-remineralization model simulating two different salivary flow rates. Enamel and dentin specimens were randomly assigned to 6 groups (n = 8), according to the combination between rinse treatments - deionized water (DIW), 12 mm NaF (NaF) or 150 mm calcium lactate followed by NaF (CaL + NaF) and unstimulated salivary flow rates - 0.5 or 0.05 ml/min simulating normal and low salivary flow rates, respectively. The specimens were placed into custom-made devices, creating a sealed chamber on the specimen surface connected to a peristaltic pump. Citric acid was injected into the chamber for 2 min, followed by artificial saliva (0.5 or 0.05 ml/min) for 60 min. This cycle was repeated 4x/day for 3 days. Rinse treatments were performed daily 30 min after the 1st and 4th erosive challenges, for 1 min each time. Surface loss was determined by optical profilometry. KOH-soluble fluoride and structurally bound fluoride were determined in specimens at the end of the experiment. Data were analyzed by 2-way ANOVA and Tukey tests (alpha = 0.05). NaF and CaL + NaF exhibited significantly lower enamel and dentin loss than DIW, with no difference between them for normal flow conditions. The low salivary flow rate increased enamel and dentin loss, except for CaL + NaF, which presented overall higher KOH-soluble and structurally bound fluoride levels. The results suggest that the NaF rinse was able to reduce erosion progression. Although the CaL prerinse considerably increased F availability, it enhanced NaF protection against dentin erosion only under hyposalivatory conditions. (C) 2014 S. Karger AG, Basel