Effects of Methylphenidate on performance of a practical pistol shooting task: a quantitative electroencephalography (qEEG) study

Abstract Background The present study examined absolute alpha power using quantitative electroencephalogram (qEEG) in bilateral temporal and parietal cortices in novice soldiers under the influence of methylphenidate (MPH) during the preparatory aiming period in a practical pistol-shooting task. We anticipated higher bi-hemispheric cortical activation in the preparatory period relative to pre-shot baseline in the methylphenidate group when compared with the control group because methylphenidate has been shown to enhance task-related cognitive functions. Methods Twenty healthy, novice soldiers were equally distributed in control (CG; n = 10) and MPH groups 10 mg (MG; n = 10) using a randomized, double blind design. Subjects performed a pistol-shooting task while electroencephalographic activity was acquired. Results We found main effects for group and practice blocks on behavioral measures, and interactions between group and phases on electroencephalographic measures for the electrodes T3, T4, P3 and P4. Regarding the behavioral measures, the MPH group demonstrated significantly poorer in shooting performance when compared with the control and, in addition, significant increases in the scores over practice blocks were found on both groups. In addition, regarding the electroencephalographic data, we observed a significant increase in alpha power over practice blocks, but alpha power was significantly lower for the MPH group when compared with the placebo group. Moreover, we observed a significant decrease in alpha power in electrodes T4 and P4 during PTM. Conclusion Although we found no correlation between behavioral and EEG data, our findings show that MPH did not prevent the learning of the task in healthy subjects. However, during the practice blocks (PBs) it also did not favor the performance when compared with control group performance. It seems that the CNS effects of MPH demanded an initial readjustment period of integrated operations relative to the sensorimotor system. In other words, MPH seems to provoke a period of initial instability due to a possible modulation in neural activity, which can be explained by lower levels of alpha power (i.e., higher cortical activity). However, after the end of the PB1 a new stabilization was established in neural circuits, due to repetition of the task, resulting higher cortical activity during the task. In conclusion, MPH group performance was not initially superior to that of the control group, but eventually exceeded it, albeit without achieving statistical significance.

Quantitative correlation between transcriptional levels of ER chaperone, peroximal protein and FVIII productivity in human Hek-293 cell line

Hek-293 cell line presents good production platform for recombinant therapeutic proteins, however little is known about the components that contribute to the cellular control of recombinant protein production. In this study, we generated a Hek-293 producing recombinant factor VIII (FVIII) and we evaluated the immunoglobulin-binding protein (BiP) and phytanoil-CoA α-hydroxylase (PAHX) expression levels which are known for diminishing FVIII production. Our analyses showed that the recombinant cell population expresses 3.1 ± 1.4 fold of BIP mRNA (P = 0.0054) and 97.8 ± 0.5 fold of PAHX mRNA (P = 0.0016) compared to nontransduced cells. The amount of these proteins was inversely correlated to the secreted FVIII. In conclusion, BIP and PAHX expression are augmented in human cells producing FVIII and they antagonize the amount of therapeutic factor VIII in the cell culture.

A quantitative analysis of current security concerns and solutions for cloud computing

The development of cloud computing services is speeding up the rate in which the organizations outsource their computational services or sell their idle computational resources. Even though migrating to the cloud remains a tempting trend from a financial perspective, there are several other aspects that must be taken into account by companies before they decide to do so. One of the most important aspect refers to security: while some cloud computing security issues are inherited from the solutions adopted to create such services, many new security questions that are particular to these solutions also arise, including those related to how the services are organized and which kind of service/data can be placed in the cloud. Aiming to give a better understanding of this complex scenario, in this article we identify and classify the main security concerns and solutions in cloud computing, and propose a taxonomy of security in cloud computing, giving an overview of the current status of security in this emerging technology.

Quantitative chemical profile and multivariate statistical analysis of alembic distilled sugarcane spirit fractions

As concentrações de 39 compostos orgânicos foram determinadas em três frações (cabeça, coração e cauda) obtidas da destilação em alambique do caldo de cana fermentado. Os resultados foram avaliados utilizando-se análise de variância (ANOVA), teste de Tukey, análise de componentes principais (PCA), agrupamento hierárquico (HCA) e análise discriminante linear (LDA). De acordo com PCA e HCA, os dados experimentais conduzem à formação de três agrupamentos. As frações de cabeça deram origem a um grupo mais definido. As frações coração e cauda apresentaram alguma sobreposição coerente com sua composição em ácidos. As habilidades preditivas de calibração e validação dos modelos gerados pela LDA para a classificação das três frações foram de 90,5 e 100%, respectivamente. Este modelo reconheceu como coração doze de treze cachaças comerciais (92,3%) com boas características sensoriais, apresentando potencial para a orientação do processo de cortes.

Biological evolution of replicator systems: towards a quantitative approach

The aim of this work is to study the features of a simple replicator chemical model of the relation between kinetic stability and entropy production under the action of external perturbations. We quantitatively explore the different paths leading to evolution in a toy model where two independent replicators compete for the same substrate. To do that, the same scenario described originally by Pross (J Phys Org Chem 17:312–316, 2004) is revised and new criteria to define the kinetic stability are proposed. Our results suggest that fast replicator populations are continually favored by the effects of strong stochastic environmental fluctuations capable to determine the global population, the former assumed to be the only acting evolution force. We demonstrate that the process is continually driven by strong perturbations only, and that population crashes may be useful proxies for these catastrophic environmental fluctuations. As expected, such behavior is particularly enhanced under very large scale perturbations, suggesting a likely dynamical footprint in the recovery patterns of new species after mass extinction events in the Earth’s geological past. Furthermore, the hypothesis that natural selection always favors the faster processes may give theoretical support to different studies that claim the applicability of maximum principles like the Maximum Metabolic Flux (MMF) or Maximum Entropy Productions Principle (MEPP), seen as the main goal of biological evolution.

A quantitative TaqMan PCR assay for the detection of Ureaplasma diversum

Ureaplasma diversum in veterinary studies is an undesirable microbe, which may cause infection in bulls and may result in seminal vesiculitis, balanopostitis, and alterations in spermatozoids, whereas in cows, it may cause placentitis, fetal alveolitis, abortion, and birth of weak calves. U. diversum is released through organic secretions, especially semen, preputial and vaginal mucus, conjunctival secretion, and milk. The aim of the present study was to develop a TaqMan probe, highly sensitive and specific quantitative PCR (qPCR) assay for the detection and quantification of U. diversum from genital swabs of bovines. Primers and probes specific to U. diversum 16S rRNA gene were designed. The specificity, detection limit, intra- and inter-assay variability of qPCR to detect this ureaplasma was compared with the results of the conventional PCR assay (cPCR). Swabs of vaginal mucus from 169 cows were tested. The qPCR assay detected as few as 10 copies of U. diversum and was 100-fold more sensitive than the cPCR. No cross-reactivity with other Mollicutes or eubacteria was observed. U. diversum was detected in 79 swabs (46.42%) by qPCR, while using cPCR it was detected in 42 (25%) samples. The difference in cPCR and qPCR ureaplasma detection between healthy and sick animals was not statistically significant. But the U. diversum load in samples from animals with genital disorders was higher than in healthy animals. The qPCR assay developed herein is highly sensitive and specific for the detection and quantification of U. diversum in vaginal bovine samples.

Quantitative detection of Staphylococcus aureus, Enterococcus faecalis and Pseudomonas aeruginosa in human oral epithelial cells from subjects with periodontitis and periodontal health

Epithelial cells in oral cavities can be considered reservoirs for a variety of bacterial species. A polymicrobial intracellular flora associated with periodontal disease has been demonstrated in buccal cells. Important aetiological agents of systemic and nosocomial infections have been detected in the microbiota of subgingival biofilm, especially in individuals with periodontal disease. However, non-oral pathogens internalized in oral epithelial cells and their relationship with periodontal status are poorly understood. The purpose of this study was to detect opportunistic species within buccal and gingival crevice epithelial cells collected from subjects with periodontitis or individuals with good periodontal health, and to associate their prevalence with periodontal clinical status. Quantitative detection of total bacteria and Staphylococcus aureus, Pseudomonas aeruginosa and Enterococcus faecalis in oral epithelial cells was determined by quantitative real-time PCR using universal and species-specific primer sets. Intracellular bacteria were visualized by confocal microscopy and fluorescence in situ hybridization. Overall, 33 % of cell samples from patients with periodontitis contained at least one opportunistic species, compared with 15 % of samples from healthy individuals. E. faecalis was the most prevalent species found in oral epithelial cells (detected in 20.6 % of patients with periodontitis, P = 0.03 versus healthy individuals) and was detected only in cells from patients with periodontitis. Quantitative real-time PCR showed that high levels of P. aeruginosa and S. aureus were present in both the periodontitis and healthy groups. However, the proportion of these species was significantly higher in epithelial cells of subjects with periodontitis compared with healthy individuals (P = 0.016 for P. aeruginosa and P = 0.047 for S. aureus). Although E. faecalis and P. aeruginosa were detected in 57 % and 50 % of patients, respectively, with probing depth and clinical attachment level ≥6 mm, no correlation was found with age, sex, bleeding on probing or the presence of supragingival biofilm. The prevalence of these pathogens in epithelial cells is correlated with the state of periodontal disease.

História da propagação das citações originais do artigo do Journal of Quantitative Spectroscopy & Radiative Transfer 102/441/2006.

Neste artigo procuraremos descrever a história cronológica das citações originais (aquelas que os nomes dos autores aparecem apenas uma vez, portanto, excluídas as autocitações) da publicação do artigo: M. Cattani and J. M. F. Bassalo, Racemization, Chiral Stability and Weak Interactions, Journal of Quantitative Spectroscopy & Radiative Transfer 102, pp. 441-449, 2006 (CB: JQS&RT 102/441/2006). Para realizar essa história, usamos a WEB OF SCIENCE (acessado: 08/02/2013) disponibilizado pela CAPES/UFPA.

Quantitative analysis of photodynamic therapy effects in rat mammary tumor vascular density using image-pro plus software

Photodynamic therapy (PDT) is a treatment modality that has advanced rapidly in recent years. It causes tissue and vascular damage with the interaction of a photosensitizing agent (PS), light of a proper wavelength, and molecular oxygen. Evaluation of vessel damage usually relies on histopathology evaluation. Results are often qualitative or at best semi-quantitative based on a subjective system. The aim of this study was to evaluate, using CD31 immunohistochem- istry and image analysis software, the vascular damage after PDT in a well-established rodent model of chemically induced mammary tumor. Fourteen Sprague-Dawley rats received a single dose of 7,12-dimethylbenz(a)anthraxcene (80 mg/kg by gavage), treatment efficacy was evaluated by comparing the vascular density of tumors after treatment with Photogem® as a PS, intraperitoneally, followed by interstitial fiber optic lighting, from a diode laser, at 200 mW/cm and light dose of 100 J/cm directed against his tumor (7 animals), with a control group (6 animals, no PDT). The animals were euthanized 30 hours after the lighting and mammary tumors were removed and samples from each lesion were formalin-fixed. Immunostained blood vessels were quantified by Image Pro-Plus version 7.0. The control group had an average of 3368.6 ± 4027.1 pixels per picture and the treated group had an average of 779 ± 1242.6 pixels per area (P < 0.01), indicating that PDT caused a significant decrease in vascular density of mammary tumors. The combined immu- nohistochemistry using CD31, with selection of representative areas by a trained pathology, followed by quantification of staining using Image Pro-Plus version 7.0 system was a practical and robust methodology for vessel damage evalua- tion, which probably could be used to assess other antiangiogenic treatments.

Type Ia Supernova Cosmology : Quantitative Spectral Analysis

Type Ia supernovae have been successfully used as standardized candles to study the expansion history of the Universe. In the past few years, these studies led to the exciting result of an accelerated expansion caused by the repelling action of some sort of dark energy. This result has been confirmed by measurements of cosmic microwave background radiation, the large-scale structure, and the dynamics of galaxy clusters. The combination of all these experiments points to a “concordance model” of the Universe with flat large-scale geometry and a dominant component of dark energy. However, there are several points related to supernova measurements which need careful analysis in order to doubtlessly establish the validity of the concordance model. As the amount and quality of data increases, the need of controlling possible systematic effects which may bias the results becomes crucial. Also important is the improvement of our knowledge of the physics of supernovae events to assure and possibly refine their calibration as standardized candle. This thesis addresses some of those issues through the quantitative analysis of supernova spectra. The stress is put on a careful treatment of the data and on the definition of spectral measurement methods. The comparison of measurements for a large set of spectra from nearby supernovae is used to study the homogeneity and to search for spectral parameters which may further refine the calibration of the standardized candle. One such parameter is found to reduce the dispersion in the distance estimation of a sample of supernovae to below 6%, a precision which is comparable with the current lightcurve-based calibration, and is obtained in an independent manner. Finally, the comparison of spectral measurements from nearby and distant objects is used to test the possibility of evolution with cosmic time of the intrinsic brightness of type Ia supernovae.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

Influenza delle caratteristiche quali-quantitative della luce da fonti artificiali sulla fisio-morfologia di piante verdi per interior landscaping

La conoscenza delle esigenze luminose (intensità, spettro, durata minima, massima ed ottimale del fotoperiodo di illuminazione) e della tolleranza alle condizioni degli interni delle piante ad uso decorativo, è di fondamentale importanza per una giusta tecnica di progettazione (dimensionamento e dislocazione dei punti luce) dell’indoor plantscaping. Il lungo periodo di condizionamento al quale queste piante vengono sottoposte, caratterizzato principalmente dalla scarsa disponibilità di luce naturale e dagli alti livelli di concentrazione di CO2 determina una forte influenza sui processi morfo-fisiologici. Il presente studio analizza il fattore luminoso ed è articolato su più punti quali; • caratterizzazione della riposta fotosintetica all’intensità luminosa di 21 delle principali specie a fogliame decorativo comunemente utilizzate nella realizzazione degli spazi verdi indoor, per stabilire quali siano i minimi ed ottimali livelli di PAR tali da garantire una fotosintesi netta positiva e nel complesso le condizioni di maggior benessere per le piante; • quantificazione dell’incremento fotosintetico netto dovuto ad una maggior concentrazione di CO2 negli interni rispetto alla concentrazione CO2 atmosferica esterna, all’aumentare dell’ intensità luminosa artificiale sulle precedenti specie; • monitoraggio dell’andamento delle attività fotosintetiche durante il periodo di illuminazione di 8 ore comunemente utilizzato in un interno ad uso lavorativo, a PAR costante e variabile in Ficus elastica e Dieffenbachia picta, al fine di stabilire quali possano essere le durate e le modalità di somministrazione della luce per rendere massima la fotosintesi netta riducendo al minimo i consumi energetici dovuti all’accensione delle lampade; • valutazione della risposta morfo-fisiologica e fotosintetica a modificazioni dello spettro luminoso mediante l’uso di LED monocromatici colorati ad emissione nel bianco, blu e rosso in Ficus benjamina e Iresine herbistii al fine di stabilire se questo tipo di lampade possano essere utilizzate come fonte integrativa e/o sostitutiva nella realizzazione degli spazi verdi interni. Vengono analizzati il punto si compensazione alla luce (g), il punto di saturazione alla luce (s), l’efficienza quantica (AQE), il punto di respirazione al buio (Rd) e la fotosintesi netta massima (A max) per (Aglaonema commutatum, Asplenium nidus, Anthurium andreanum, Begonia rex, Calathea luoise, Calathea veitchiana, Calathea rufibarba, Calathea zebrina, Codiaeum variegatum, Cthenanthe oppenheimiana, Dieffenbakia picta, Ficus benjamina, Ficus elatica, Ficus longifolia, Fittonia verschaffeltii, Iresine herbistii, Philodendron erubescens, Philodendron pertusum, Potos aureus, Spathiphillum wallisi, Syngonium podophillum ) e classificate le specie in funzione di Amax in quattro categorie; A max < 2 µmol CO2 m-2 s-1, A max compresa tra 2 e 4 µmol CO2 m-2 s-1, Amax cpmpresa tra 4 e 6 µmol CO2 m-2 s-1, Amax > 6 µmol CO2 m-2 s-1, al fine di mettere in risalto la potenzialità fotosintetiche di ogni singola specie. I valori di PAR compresi tra (g) ed (s) forniscono le indicazioni sulle quali basarsi per scegliere una giusta lampada o dimensionare un punto luce per ogni singola specie e/o composizione. È stimata l’influenza di due livelli di concentrazione di CO2 ambientale (400 e 800 ppm) all’incrementare dell’intensità luminosa sul processo fotosintetico delle specie precedenti. Per quasi tutte le specie 800 ppm di CO2 non favoriscono nessun incremento all’attività fotosintetica ad eccezione di Ficus benjamina, Ficus elatica e Syngonium podophillum se non accompagnati da una disponibilità luminosa superiore alle 10 µmol m-2 s-1. Viene monitorato l’andamento dell’attività fotosintetica a PAR costante e variabile (intervallando periodi di 8 minuti a PAR 40 e 80) durante 8 ore di illuminazione su Ficus elastica e Dieffenbachia picta al fine di stabilire la miglior modalità di somministrazione della luce. La fotosintesi netta cumulativa per l’intera durata di illuminazione a PAR costante mostra un calo dopo alcune ore dall’attivazione in Dieffenbackia, e un andamento oscillatorio in Ficus. L’illuminazione alternata consente di raggiungere i quantitativi di CO2 organicata a 80 µmol m-2 s-1 di PAR, dopo 5 ore e mezza sia in Ficus che Dieffenbackia sebbene le potenzialità fotosintetiche delle due piante siano molto differenti. È stato valutato l’effetto dell’illuminazione artificiale mediante LED (15W) a luce bianca, blu e rossa monocromatica in rapporto alla luce neon(36W) bianca tradizionale (con differenti abbinamenti tra le lampade) sui principali parametri morfologici e fisiologici, in Ficus benjamin ‘Variegata’ e Iresine herbistii per verificare se tali fonti possono rappresentare una valida alternativa nella sostituzione o integrazione di altre lampade per gli spazi verdi indoor. Tutte le combinazioni LED indagate possono rappresentare un’alternativa di sostituzione alla coltivazione con neon ed un risparmio energetico di oltre il 50%. Una PAR di 20,6 µmol m-2 s-1 della singola lampada LED bianco è sufficiente per mantenere la pianta in condizioni di sopravvivenza con un consumo di 15W a fronte dei 36W necessari per il funzionamento di ogni neon. La combinazione LED bianco + LED blu monocromatico favorisce il contenimento della taglia della pianta, caratteristica gradita nella fase di utilizzo indoor, una maggior produzione di sostanza secca e un’attività fotosintetica più elevata.

Quantitative Untersuchungen zur mRNA-Expression verschiedener Neurotransmitterrezeptoren im Verlauf der neuronalen Entwicklung der Zellinie PCC7-Mz1

Die murine embryonale Karzinomazellinie PCC7-Mz1 stellt ein Modell neuronaler Entwicklung dar, da nach RA-Gabe eine Differenzierung in neuronale, gliale und fibroblastoide Phänotypen erfolgt. Um die Expression von Neurotransmitterrezeptoren während der neuronalen Entwicklung zu untersuchen, wurde in dieser Arbeit eine quantitative Analyse der Expression verschiedener Neurotransmitterrezeptoren im Verlauf der RA-induzierten Differenzierung der PCC7-Mz1 Zellen durchgeführt. Zu diesem Zweck wurde eine kompetitive RT-PCR eingesetzt. Als Kompetitor wurde ein synthetisches Gen ( SG) konstruiert, das sich aus den Antisense- und Sense-Primersequenzen zur spezifischen Amplifikation des Dopaminrezeptors D2, des Serotoninrezeptors 5HT3, der GABAA-Untereinheiten ß1 und ß3, der metabotropen Glutamatrezeptoren mGluR1 und mGluR5, der 5 NMDA-Rezeptoruntereinheiten 1,2a,2b,2c und 2d, der Markerproteine Synaptophysin und GFAP, und der Untereinheiten a3, a4 und a7 des nikotinischen Acetylcholinrezeptors zusammensetzt. Mit diesem SG erfolgten die Quantifizierungen der Rezeptor-mRNA im Sättigungsbereich der PCR. Die erhaltenen Transkriptmengen wurden auf ein Neuron bezogen, wodurch eine Korrelation zur neuronalen Entwicklung erfolgen konnte.

Quantitative Aspekte der Anziehungskraft von Straßenbeleuchtungen auf die Emergenz aus nahegelegenen Gewässern (Ephemeroptera, Plecoptera, Trichoptera, Diptera: Simuliidae, Chironomidae, Empididae) unter Berücksichtigung der spektralen Emission ve

Beim Beobachten von nächtlichen Insektenschwärmen an Straßenbeleuchtungen kommt es zur Frage, inwieweit von einer Bedrohung eines geordneten Naturkreislaufes durch dieses Phänomen gesprochen werden kann. Am Beispiel der bedrohten Artenvielfalt aquatischer Insekten im Bereich anthropogen bedingt verschmutzter Fließgewässer wurde die Problematik umfassend untersucht. Die Freilandtests erstreckten sich von Sommer 1998 bis Sommer 2000. Die vorliegende Arbeit geht mehreren Fragestellungen nach:1. - Wie hoch ist der Anteil aquatischer Insekten, der von dem Ort seiner Emergenz aus von einer naheliegenden Straßenlaterne angezogen wird ?2. - Welcher Lampentyp lockt weniger Insekten an: OSRAM HQL (Weiß-Mischlicht) oder PHILIPPS SON (gelbes Licht) ?3. - Welche Wellenlängenbereiche des Lichts sind beim Anflug an die Lampe von besonderer Präferenz ? zu 1. - Aquatische Insekten wiesen kein einheitliches Verhalten im Anflug an künstliches Licht auf. In den Sommermonaten kam es bei einigen Insektengruppen, wie z.B. den Trichopteren, zu einem massenhaften Anflug an die eine, im Untersuchungsgebiet aufgestellte Straßenlaterne. In dieser Zeit ergaben sich im Mittelwert Fangzahlen in einer Nacht am Licht, die der Emergenz von 25 Metern Bachufer/72 Stunden entsprachen. Bei den Dipteren ergab der mittlere Wert eine Emergenz von knapp 10 Metern Uferlänge/72 Stunden. Aufgrund hoher Fangzahlen konnten folgende Ergebnisse auf Artniveau bei den Chironomiden erzielt werden. Bei den zehn häufigsten Arten aus Emergenz und Lichtfang zeigten sich starke Schwankungen: Der Fang am Licht entsprach im Maximum einer Schlupfrate von 61 Metern Ufer/ 72 Stunden bei einer Art, bei einer anderen Art wurde z.B. ein Lichtfang erzielt, der lediglich die Emergenz von 0,3 Metern/72 Stunden umfaßte.zu 2. - In dem ohne Lichtkonkurrenz stattfindenden Vergleich zwischen PHILIPPS SON 70W und OSRAM HQL 125W ergab sich eine Fangrelation von 1:1,6 (SON:HQL). Bei einem Parallelfang (30 Metern Abstand der Leuchten) mit SON/HQL flogen wesentlich mehr Tiere an die HQL: Hier betrug die Relation 1:3,97 (SON:HQL). Es fand somit bei Lichtkonkurrenz eine Abwanderung der Insekten zur 'attraktiveren' Lampe statt.zu 3. - Zuletzt wurde die Anlockwirkung dreier Farbspektren mit den Intensitätsmaxima einer Wellenlänge von 437nm, 579nm und 599nm getestet. 437nm war die in der HQL gemessene Intensitätsspitze im niedrigwelligen Bereich und nach verbreiteter Auffassung von besonderer Anlockwirkung. Der Wellenlängenbereich um 579nm stellte das Intensitätsmaximum der SON-Lampe dar (gelbes Licht); 599nm war als Alternative für anlockschwache Beleuchtungen ausgewählt worden. Hier ergab sich bei abwechselndem Fang (ohne Lichtkonkurrenz) eine Fangrelation von 1,8 : 3,4 : 1 (437nm : 579nm : 599nm).