Bounds on policy relevant parameters with discrete policy variation

When estimating policy parameters, also known as treatment effects, the assignment to treatment mechanism almost always causes endogeneity and thus bias many of these policy parameters estimates. Additionally, heterogeneity in program impacts is more likely to be the norm than the exception for most social programs. In situations where these issues are present, the Marginal Treatment Effect (MTE) parameter estimation makes use of an instrument to avoid assignment bias and simultaneously to account for heterogeneous effects throughout individuals. Although this parameter is point identified in the literature, the assumptions required for identification may be strong. Given that, we use weaker assumptions in order to partially identify the MTE, i.e. to stablish a methodology for MTE bounds estimation, implementing it computationally and showing results from Monte Carlo simulations. The partial identification we perfom requires the MTE to be a monotone function over the propensity score, which is a reasonable assumption on several economics' examples, and the simulation results shows it is possible to get informative even in restricted cases where point identification is lost. Additionally, in situations where estimated bounds are not informative and the traditional point identification is lost, we suggest a more generic method to point estimate MTE using the Moore-Penrose Pseudo-Invese Matrix, achieving better results than traditional methods.

Cash-cum-in-kind transfers and income tax function

This paper investigates income tax revenues response to tax rate changes taking into consideration that cash-cum-in-kind transfers are used as a redistributive package to the community. First, we show that when cash and in-kind transfers are not tied to be substitute instruments, a marginal income tax increase may unambiguously decrease the quantity supplied of labor (and tax revenues therein). Next, we show that whenever the government chooses the optimum provision for the publicly provided good the tax revenue function has a negatively-sloped part with respect to tax rates except for one case. Last, we consider Brazilian data - PNAD - from 1976 to 2008 to test our theoretical implications. Our estimations suggest a weak evidence in favor of the existence of a La er-type curve for Brazilian income tax revenues data. Moreover, wend that the actual average income tax rate seems to be below the estimated optimum level. In a shorter sample from 1996-1999, we nd evidence that labor supply decreases with tax rate when cash and in-kind transfers are in play. Using a pseudo-panel from the same shorter sample, we try to estimate the elasticity of taxable income, following Creedy and Gemmell (2012) and Saez et al. (2009). We explore a small tax reform between 1997 and 1998 that a ected only the higher income tax bracket, and evidence that Brazil is on the revenue reducing side of the La er Curve, at least for individuals in the higher income tax bracket.

Controlo automático de um interferómetro para monitorização e caracterização de sensores interferométricos

A indústria de sensores de fibra óptica está a tornar-se cada vez mais importante e emprega diferentes técnicas que permitem monitorizar uma grande variedade de parâmetros. Uma das técnicas que apresenta grandes potencialidades, devido ao seu elevado desempenho, é a técnica interferométrica, que fornece, simultaneamente, uma grande sensibilidade e uma larga gama dinâmica. Além destas vantagens, juntam-se as vantagens comuns associadas a todos os sensores de fibra óptica, tais como passividade eléctrica, fiabilidade e possibilidade de multiplexagem, que também se aplicam aos sensores interferométricos. Outra técnica muito utilizada no ramo dos sensores de fibra óptica, em configurações interferométricas com intuito de interrogação, é a técnica de interferometria de luz branca. Esta técnica permite precisão de medição, insensibilidade a flutuações da potência óptica ao longo do sistema de interrogação, assim como uma resolução elevada. Com o intuito de tornar os sistemas de instrumentação / interrogação mais compactos e flexíveis foi desenvolvida uma plataforma de instrumentação virtual, que consiste em aplicações de software que implementam as funções dos instrumentos físicos em ambiente computacional. Esta área permite obter sistemas de instrumentação / interrogação menos complexos, de maior portabilidade e com um custo mais reduzido. Esta dissertação tem como objectivo o desenvolvimento de um sistema de interrogação de sensores de fibra óptica interferométricos controlado automaticamente através de instrumentação virtual, sendo necessário numa fase inicial um estudo aprofundado dos sensores de fibra óptica, das diferentes técnicas de interrogação e da área de instrumentação virtual. O capítulo 1 é o capítulo de introdução, onde são apresentados de forma genérica os diferentes conceitos inerentes ao trabalho, nomeadamente sensores de fibra óptica e os conceitos de interrogação de sensores interferométricos e conceitos de instrumentação virtual. Os sensores interferométricos são abordados com mais detalhe no capítulo 2. Neste capítulo são abordados os conceitos teóricos de interferometria, assim como os diferentes esquemas interferométricos geralmente utilizados em sensores de fibra óptica.No capítulo 3 são apresentados os diferentes esquemas de detecção de sinal utilizados para interrogar sensores interferométricos de fibra óptica. É apresentada a técnica de interferometria de luz branca e os esquemas de detecção de sinal homódina e heteródina. O conceito de instrumentação, com ênfase nos sistemas de instrumentação virtual é apresentado no capítulo 4. É abordado o tema de sistemas de instrumentação tradicionais e de instrumentação virtual, dando ênfase às vantagens destes últimos. É também apresentado o ambiente de programação LabVIEW e o amplificador lock-in virtual, utilizado no desenvolvimento do projecto. No capítulo 5 é apresentado o desenvolvimento do sistema de interrogação de sensores interferométricos proposto inicialmente. Todo o desenvolvimento, desde implementação do interferómetro receptor, passando pelo sistema de controlo baseado em instrumentação virtual, até à caracterização do sistema está documentado neste capítulo. A monitorização e caracterização de sensores interferométricos com o sistema apresentado no capítulo 5 estão documentadas no capítulo 6. No capítulo 7 são apresentadas as conclusões relativas ao trabalho desenvolvido, assim como as perspectivas futuras de evolução do sistema implementado.

A JML-Based strategy for incorporating formal specifications into the software development process

This thesis presents a JML-based strategy that incorporates formal specifications into the software development process of object-oriented programs. The strategy evolves functional requirements into a “semi-formal” requirements form, and then expressing them as JML formal specifications. The strategy is implemented as a formal-specification pseudo-phase that runs in parallel with the other phase of software development. What makes our strategy different from other software development strategies used in literature is the particular use of JML specifications we make all along the way from requirements to validation-and-verification.

A new insight about pharmaceutical dosage forms for benzathine penicillin G

In this work, a micellar system of benzathine penicillin G (BPG) in sodium deoxycholate (NaDC) was developed and evaluated physicochemically. The solubility profile of the drug in water and buffer solutions at various pH was determined, as well as its n-octanol/water partition coefficient. The Critical Micellar Concentration of NaDC and its ability to incorporate BPG were also assessed. The study was carried out at low and high ionic strength which was adjusted by the addition of sodium chloride. The results demonstrated the ability of the micellar system to incorporate BPG, as well as to increase its apparent solubility in water. The enhancement of the solubility of BPG by the presence of NaDC micelles could be analyzed quantitatively within the framework of the pseudo-phase model. Concentration analysis showed that the micellar system could attain up to 90% incorporation of BPG. The incorporated drug is expected to exhibit improved stability, since the antibiotic enclosed in the hydrophobic core of micelles is rather shielded from the aqueous external environment

Análise do comportamento e crescimento do camarão branco Litopenaeus vannamei (Boone, 1931) em diferentes substratos inconsolidados

The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night

Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions

Rejeito de xisto como adsorvente para remoção de fenol em águas produzidas na indústria de petróleo

Produced water is the main effluent linked to the activity of extraction of oil and their caring management is necessary due to the large volume involved, to ensure to minimize the negative impacts of discharges of these waters in the environment. This study aimed to analyze the use of retorted shale, which is a reject from the pyrolysis of pirobituminous shale, as adsorbent for the removal of phenols in produced water. The material was characterized by different techniques (grain sized analysis, thermal analysis, BET, FRX, FT-IR, XRD and SEM), showing the heterogeneity in their composition, showing its potential for the removal of varied compounds, as well as the phenols and their derivatives. For the analysis of the efficiency of the oil shale for the adsorption process, assays of adsorption balance were carried through, and also kinetic studies and dynamics adsorption, in the ETE of the UTPF of Petrobras, in Guamaré-RN. The balance assays shown a bigger conformity with the model of Langmuir and the kinetic model more adjusted to describe the adsorption of phenols in retorted shale was of pseudo-second order. The retorted shale presented a low capacity of adsorption of phenols (1,3mg/g), when related to others conventional adsorbents, however it is enough to the removal of these composites in concentrations presented in the produced water of the UTPF of Guamaré. The assays of dynamics adsorption in field had shown that the concentration of phenol in the effluent was null until reaching its rupture (58 hours). The results showed the possibility of use of the reject for removal of phenols in the final operations of the treatment process, removing as well, satisfactorily, the color and turbidity of the produced water, with more than 90% of removal

Gerenciamento de alarmes em plataformas marítimas de produção de hidrocarbonetos: metodologia e estudo de caso

In the operational context of industrial processes, alarm, by definition, is a warning to the operator that an action with limited time to run is required, while the event is a change of state information, which does not require action by the operator, therefore should not be advertised, and only stored for analysis of maintenance, incidents and used for signaling / monitoring (EEMUA, 2007). However, alarms and events are often confused and improperly configured similarly by developers of automation systems. This practice results in a high amount of pseudo-alarms during the operation of industrial processes. The high number of alarms is a major obstacle to improving operational efficiency, making it difficult to identify problems and increasing the time to respond to abnormalities. The main consequences of this scenario are the increased risk to personal safety, facilities, environment deterioration and loss of production. The aim of this paper is to present a philosophy for setting up a system of supervision and control, developed with the aim of reducing the amount of pseudo-alarms and increase reliability of the information that the system provides. A real case study was conducted in the automation system of the offshore production of hydrocarbons from Petrobras in Rio Grande do Norte, in order to validate the application of this new methodology. The work followed the premises of the tool presented in ISA SP18.2. 2009, called "life cycle alarm . After the implementation of methodology there was a significant reduction in the number of alarms

A microestrutura e o desenvolvimento dos órgãos genitais masculinos de preás (Galea spixii) criados em cativeiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural features of the epididymal region of the domestic duck (Anas plathyrynchos)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hume: ceticismo e demarcação

Propomo-nos a mostrar que, ao contrário do que supõe o senso comum, é possível separar o problema da cientificidade do problema da verdade, ou seja, podem-se estabelecer critérios de acordo com os quais um conhecimento é legítimo, embora não se possa nunca saber se ele ou qualquer outro é verdadeiro; pode-se, ainda, aplicar esses mesmos critérios para identificar e desqualificar pseudoconhecimentos. Para tratar dessa temática familiar à Filosofia da Ciência, tomamos como exemplo um pensador que lhe é precursor, o filósofo empirista do século XVIII, David Hume.