Avaliação da tenacidade à fratura em juntas soldadas circunferenciais de tubulações de processo

This work aims to analyze the toughness of a welded joint in the presence of a crack through the analysis of maximum tension the material can withstand the presence of this type of defect, since a discontinuity is likely to occur in this type of joint and its detection and its design is simple, using non-destructive testing techniques. The study will be conducted through the CTOD test - Crack-Tip Opening Displacement, with type specimens SE (B) - Single Edge Bend taken from a weld in the L-C position in relation to the length (longitudinal axis) of a test tube. The main idea is to simulate the welding conditions for the manufacture of industrial pipes, made in boiler shops (pipe-shop) within petrochemical plants. These pipes are often subject to operation with flammable and toxic subjected to high pressures and temperatures, where one can break the line can cause irreparable damage to the plant, the environment and the health of surrounding communities. With this study we evaluate whether the weld metal has the same properties as fracture toughness of the base material. This study shows the importance of using a qualified welding procedure for performing quality welds while maintaining the properties of the fracture toughness of the base metal. It was found from the results of tests using a welding procedure described for carrying out welding ensures mechanical properties very close to the base metal, which in terms of design is great, since one can ensure that the weld will the same characteristics of the base metal specified for the assembly of the pipe

Efeito da hCG ou deslorelina sobre a hemodinâmica folicular e perfil endogeno de LH em éguas cíclicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of sulfate in ethanol fuel using an electrode chemically modified with polypyrrole by flow injection analysis

In this work, an electrode chemically modified with polypyrrole (PCME) was employed for determination of sulfate in ethanol fuel using a FIA system. The PCME was prepared by polymerization of pyrrole at a glassy carbon electrode by means of cyclic voltammetry technique. An analytical curve from 1.0 x 10−5 to 8.0 x 10−5 mol L−1 was obtained in flow injection system based on the PCME. An amperometric sensibility of 2.3 x 10−3 A mol−1 L and a detection limit of 2.5 x 10−6 mol L−1 were achieved. The proposed method was employed for determination of sulfate ions in commercial samples of ethanol fuel. The results were in good agreement with those obtained by the ionic chromatographic method.

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Detecção do vírus da cinomose canina por diferentes metodologias analíticas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de método analítico para estudo de degradação forçada de cefalotina sódica na forma farmacêutica pó liofilizado para solução injetável

Pós-graduação em Ciências Farmacêuticas - FCFAR

Epidemiological profile of hepatitis C virus infection in patients from west region of Minas Gerais State, Brazil

Hepatitis C virus (HCV) is a serious public health problem and is the leading cause of liver transplantation due to cirrhosis and hepatocellular carcinoma. In Brazil, it is estimated that there are approximately 2 to 3 million HCV chronic carriers. Few data regarding HCV infection are available in West region of Minas Gerais State. Due to the absence of an effective vaccine against this important human pathogen and the high costs of antiviral treatment, it is important to conduct epidemiological studies with the purpose of carry out the planning and implementation of measures to prevent hepatitis C in different populations. Therefore, the aim of this study is to describe the epidemiological aspects of HCV patients from West region of Minas Gerais State, Brazil. Sociodemographic data and risk factors for HCV infection were determined from 74 HCV patients from Uberlandia city (Minas Gerais State). Reactive anti-HCV sera samples were submitted to HCV RNA and genotype detection. Most of individuals were male (63.5%) with mean age of 51 years and presenting low socioeconomic status. HCV genotype was determined among 40 samples and the frequencies were: genotype 2 (45%), 1 (37.5%) and 3 (17.5%). Hepatitis C virus (HCV) infection was common among male and low socioeconomic status individuals.

Disappearance of fat body proteins during soldier differentiation in the neotropical termite Heterotermes tenuis (Isoptera: Rhinotermitidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Michelson interferometer vibrometer using self-correcting synthetic-heterodyne demodulation

Synthetic-heterodyne demodulation is a useful technique for dynamic displacement and velocity detection in interferometric sensors, as it can provide an output signal that is immune to interferometric drift. With the advent of cost-effective, high-speed real-time signal-processing systems and software, processing of the complex signals encountered in interferometry has become more feasible. In synthetic heterodyne, to obtain the actual dynamic displacement or vibration of the object under test requires knowledge of the interferometer visibility and also the argument of two Bessel functions. In this paper, a method is described for determining the former and setting the Bessel function argument to a set value, which ensures maximum sensitivity. Conventional synthetic-heterodyne demodulation requires the use of two in-phase local oscillators; however, the relative phase of these oscillators relative to the interferometric signal is unknown. It is shown that, by using two additional quadrature local oscillators, a demodulated signal can be obtained that is independent of this phase difference. The experimental interferometer is aMichelson configuration using a visible single-mode laser, whose current is sinusoidally modulated at a frequency of 20 kHz. The detected interferometer output is acquired using a 250 kHz analog-to-digital converter and processed in real time. The system is used to measure the displacement sensitivity frequency response and linearity of a piezoelectric mirror shifter over a range of 500 Hz to 10 kHz. The experimental results show good agreement with two data-obtained independent techniques: the signal coincidence and denominated n-commuted Pernick method.

Diffusive random laser modes under a spatiotemporal scope

At present the prediction and characterization of the emission output of a diffusive random laser remains a challenge, despite the variety of investigated materials and theoretical interpretations given up to now. Here, a new mode selection method, based on spatial filtering and ultrafast detection, which allows to separate individual lasing modes and follow their temporal evolution is presented. In particular, the work explores the random laser behavior of a ground powder of an organic-inorganic hybrid compound based on Rhodamine B incorporated into a di-ureasil host. The experimental approach gives direct access to the mode structure and dynamics, shows clear modal relaxation oscillations, and illustrates the lasing modes stochastic behavior of this diffusive scattering system. The effect of the excitation energy on its modal density is also investigated. Finally, imaging measurements reveal the dominant role of diffusion over amplification processes in this kind of unconventional lasers. (C) 2015 Optical Society of America

Planet formation in a triple stellar system: implications of the third star's orbital inclination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Farmacocinética pré-clínica e avaliação toxicológica do novo composto α2-adrenérgico 3-(2-cloro-6-fluorobenzil)-imidazolidina-2,4-diona - PT-31 GIRSUPAN

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Epidemiological profile of hepatitis C virus infection in patients from west region of Minas Gerais State, Brazill

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Importância da avaliação hematológica e sorológica (dot-blot ELISA) no diagnóstico de erliquiose em cães

This study compared the hematological and serological analysis of diagnosis of canine ehrlichiosis. The survey of Ehrlichia canis was performed through the evaluation of blood smears from 150 dogs. The serological test was performed on 12 samples selected by the platelet count (less than 170,000 platelets / uL). Serologic testing was performed with the Imunocomb kit - Dot-blot-ELISA. No cytoplasmatic inclusion characteristic of morula of E. canis was found in blood smears. In serologic testing, eight samples were positive for Ehrlichia canis, concluding that thrombocytopenia is an important hematological finding of ehrlichiosis diagnosis and the detection of Ehrlichia canis morulae is uncommon. The serological evaluation Dot-blot ELISA is an accurate and brief diagnosis method of canine ehrlichiosis, been the most appropriate to be used in veterinary practice routine.

Validation of a HPLC method for determination of glutamine in food additives using post-column derivatization

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)