Missense mutations in TENM4, a regulator of axon guidance and central myelination, cause essential tremor.

Essential tremor (ET) is a common movement disorder with an estimated prevalence of 5% of the population aged over 65 years. In spite of intensive efforts, the genetic architecture of ET remains unknown. We used a combination of whole-exome sequencing and targeted resequencing in three ET families. In vitro and in vivo experiments in oligodendrocyte precursor cells and zebrafish were performed to test our findings. Whole-exome sequencing revealed a missense mutation in TENM4 segregating in an autosomal-dominant fashion in an ET family. Subsequent targeted resequencing of TENM4 led to the discovery of two novel missense mutations. Not only did these two mutations segregate with ET in two additional families, but we also observed significant over transmission of pathogenic TENM4 alleles across the three families. Consistent with a dominant mode of inheritance, in vitro analysis in oligodendrocyte precursor cells showed that mutant proteins mislocalize. Finally, expression of human mRNA harboring any of three patient mutations in zebrafish embryos induced defects in axon guidance, confirming a dominant-negative mode of action for these mutations. Our genetic and functional data, which is corroborated by the existence of a Tenm4 knockout mouse displaying an ET phenotype, implicates TENM4 in ET. Together with previous studies of TENM4 in model organisms, our studies intimate that processes regulating myelination in the central nervous system and axon guidance might be significant contributors to the genetic burden of this disorder.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Decoupled evolution of floral traits and climatic preferences in a clade of Neotropical Gesneriaceae.

BACKGROUND: Major factors influencing the phenotypic diversity of a lineage can be recognized by characterizing the extent and mode of trait evolution between related species. Here, we compared the evolutionary dynamics of traits associated with floral morphology and climatic preferences in a clade composed of the genera Codonanthopsis, Codonanthe and Nematanthus (Gesneriaceae). To test the mode and specific components that lead to phenotypic diversity in this group, we performed a Bayesian phylogenetic analysis of combined nuclear and plastid DNA sequences and modeled the evolution of quantitative traits related to flower shape and size and to climatic preferences. We propose an alternative approach to display graphically the complex dynamics of trait evolution along a phylogenetic tree using a wide range of evolutionary scenarios. RESULTS: Our results demonstrated heterogeneous trait evolution. Floral shapes displaced into separate regimes selected by the different pollinator types (hummingbirds versus insects), while floral size underwent a clade-specific evolution. Rates of evolution were higher for the clade that is hummingbird pollinated and experienced flower resupination, compared with species pollinated by bees, suggesting a relevant role of plant-pollinator interactions in lowland rainforest. The evolution of temperature preferences is best explained by a model with distinct selective regimes between the Brazilian Atlantic Forest and the other biomes, whereas differentiation along the precipitation axis was characterized by higher rates, compared with temperature, and no regime or clade-specific patterns. CONCLUSIONS: Our study shows different selective regimes and clade-specific patterns in the evolution of morphological and climatic components during the diversification of Neotropical species. Our new graphical visualization tool allows the representation of trait trajectories under parameter-rich models, thus contributing to a better understanding of complex evolutionary dynamics.

The polymorhism of crime scene investigation: an exploratory analysis of the influence of crime and forensic intelligence on decisions made by crime scene examiners

A growing body of scientific literature recurrently indicates that crime and forensic intelligence influence how crime scene investigators make decisions in their practices. This study scrutinises further this intelligence-led crime scene examination view. It analyses results obtained from two questionnaires. Data have been collected from nine chiefs of Intelligence Units (IUs) and 73 Crime Scene Examiners (CSEs) working in forensic science units (FSUs) in the French speaking part of Switzerland (six cantonal police agencies). Four salient elements emerged: (1) the actual existence of communication channels between IUs and FSUs across the police agencies under consideration; (2) most CSEs take into account crime intelligence disseminated; (3) a differentiated, but significant use by CSEs in their daily practice of this kind of intelligence; (4) a probable deep influence of this kind of intelligence on the most concerned CSEs, specially in the selection of the type of material/trace to detect, collect, analyse and exploit. These results contribute to decipher the subtle dialectic articulating crime intelligence and crime scene investigation, and to express further the polymorph role of CSEs, beyond their most recognised input to the justice system. Indeed, they appear to be central, but implicit, stakeholders in intelligence-led style of policing.

Role of Munc18c in SNARE-mediated exocytosis

Background: The SNARE (Soluble N-ethylmaleimide-sensitive factor Attachment protein Receptors) and SM (Sec1/Munc18) family of proteins form the core machinery that drives the fusion of vesicles in different membrane trafficking steps. They are highly conserved, implying a similar mode of binding and function. In vertebrates, Munc18a is essential for neuronal exocytosis. It binds to its partner syntaxin1a (Syx1a) at both its N-peptide and closed conformation, and thereby inhibits SNARE complex formation in vitro. By contrast, its close homolog Munc18c is thought to interact with only the N-peptide of its partner Syx4. Moreover, different effects of Munc18c on SNARE complex formation have been reported, suggesting that the two Munc18/Syx pairs act differently. Objective: The aim of the present study was to investigate whether the mechanism of action of Munc18c indeed deviates from that of Munc18a by using sensitive biochemical and biophysical methods. Results: I found that Munc18c does have a similar binding mode as Munc18a and interacts tightly with Syx4 at both the N-peptide and closed conformation. Moreover, I established, through a novel assay, that Munc18c inhibits SNARE complex assembly, with both the binding sites contributing to inhibition, similar to Munc18a. However, there were several subtle differences between the two Munc18/Syx pairs. Munc18a exerted stronger inhibition than Munc18c. Also their respective Syx partners were found to differ in the rate of binding to SNAP25, suggesting that the equilibrium of their open and closed conformations is different. Moreover, Munc18a was found to interact with Syx 1, 2, 3 but not 4, while Munc18c bound to Syx 2, 4 and 1 but not 3. By comparing the kinetics of interaction of Syx with either Munc18 or SNAP25, I found that the block of SNARE complex assembly by Munc18 is effective on a shorter time scale, but SNAP25 eventually binds to Syx resulting in SNARE complex formation. Nevertheless, these findings do not explain how Syx can escape the tight grip of Munc18, suggesting that other proteins or mechanisms are needed for this step. I also discovered that Munc18 is able to bind on the surface of the SNARE core complex; however, this observation needs to be tested more rigorously. Conclusion: Munc18c was found to be similar to Munc18a in its mode of binding to Syx and inhibition of SNARE complex assembly. However, differences in kinetics and interaction specificities were observed between the different Munc18/Syx pairs. -- Contexte : Les familles des protéines SNARE (Soluble N-ethylmaleimide-sensitive factor At- tachment protein Receptors) et SM (Sec1/Munc18) forment le coeur de la machinerie chargée de la fusion vésiculaire au cours des différentes étapes du trafic intracellulaire. Elles sont très conservées, suggérant un mode d'interaction et des fonctions semblables. Chez les Verté- brés, Munc18a est essentielle à l'exocytose neuronale. Elle se lie à sa partenaire d'interaction syntaxin1a (Syx1a) à la fois via un peptide N-terminal et la conformation fermée de celle-ci, inhibant ainsi la formation du complexe SNARE in vitro. Son homologue proche Munc18c au contraire, est supposée interagir seulement avec le peptide N-terminal de sa partenaire Syx4. En outre, différents effets de Munc18c sur la formation du complexe SNARE ont été décrits, suggérant que les deux paires Munc18/Syx fonctionnent différemment. Objectif : Le but de cette étude est de tester si les mécanismes de fonctionnement de Munc18c diffèrent vraiment de ceux de Munc18a par le biais de méthodes biochimiques et biophysiques très précises. Résultats : J'ai pu démontrer que Munc18c se comporte en effet de façon semblable à Munc18a, et interagit étroitement avec Syx4 à ses deux sites de liaison. J'ai pu de surcroît montrer par une nouvelle méthode que Munc18c inhibe l'assemblage du complexe SNARE en impliquant ces deux sites de liaison, comme le fait Munc18a. il existe cependant de subtiles différences entre les deux paires Munc18/Syx : Munc18a exerce une inhibition plus forte que Munc18c ; leurs Syx partenaires diffèrent également dans leur degré de liaison à SNAP25, ce qui suggère un équilibre different de leurs conformations ouverte et fermée. De plus, Munc18a interagit avec Syx 1, 2 et 3 mais pas Syx 4, alors que Munc18c se lie à Syx 2, 4 et 1 mais pas Syx 3. En comparant les cinétiques d'interaction de Syx avec Munc18 ou SNAP25, j'ai découvert que le blocage par Munc18 de l'assemblage du complexe SNARE est effectif de façon brève, bien que SNAP25 finisse par se lier à Syx et aboutir ainsi à la formation du complexe SNARE. Ces découvertes n'expliquent cependant pas comment Syx parvient à échapper à la solide emprise de Munc18, et suggèrent ainsi l'intervention nécessaire d'autres protéines ou mécanismes à cette étape. J'ai également découvert que Munc18 peut se lier à la surface de la partie centrale du complexe SNARE - cette observation reste à être testée de façon plus stringente. Conclusion : Il a pu être établi que Munc18c est semblable à Munc18a quant à son mode de liaison à Syx et d'inhibition de l'assemblage du complexe SNARE. Des différences de cinétique et de spécificité d'interaction entre les diverses paires Munc18/Syx ont cependant été identifiées.

Communication skills in diagnostic pathology.

Communication is an essential element of good medical practice also in pathology. In contrast to technical or diagnostic skills, communication skills are not easy to define, teach, or assess. Rules almost do not exist. In this paper, which has a rather personal character and cannot be taken as a set of guidelines, important aspects of communication in pathology are explored. This includes what should be communicated to the pathologist on the pathology request form, communication between pathologists during internal (interpathologist) consultation, communication around frozen section diagnoses, modalities of communication of a final diagnosis, with whom and how critical and unexpected findings should be communicated, (in-)adequate routes of communication for pathology diagnoses, who will (or might) receive pathology reports, and what should be communicated and how in case of an error or a technical problem. An earlier more formal description of what the responsibilities are of a pathologist as communicator and as collaborator in a medical team is added in separate tables. The intention of the paper is to stimulate reflection and discussion rather than to formulate strict rules.

Deposition and characterization of lines printed through laser-induced forward transfer

The possibility of printing two-dimensional micropatterns of biomolecule solutions is of great interest in many fields of research in biomedicine, from cell-growth and development studies to the investigation of the mechanisms of communication between cells. Although laser-induced forward transfer (LIFT) has been extensively used to print micrometric droplets of biological solutions, the fabrication of complex patterns depends on the feasibility of the technique to print micron-sized lines of aqueous solutions. In this study we investigate such a possibility through the analysis of the influence of droplet spacing of a water and glycerol solution on the morphology of the features printed by LIFT. We prove that it is indeed possible to print long and uniform continuous lines by controlling the overlap between adjacent droplets. We show how, depending on droplet spacing, several printed morphologies are generated, and we offer, in addition, a simple explanation of the observed behavior based on the jetting dynamics characteristic of the LIFT of liquids.

Seroprevalence of Coxiella burnetii and Brucella abortus among pregnant women.

Coxiella burnetii and Brucella abortus are two intracellular bacteria implicated in zoonotic miscarriage. In the present study, C. burnetii and B. abortus seroprevalence was compared among women from London with and without miscarriage. Coxiella burnetii seroprevalence was high (4.6%, 95% CI 2.8-7.1) despite the rare apparent exposure of this urban population. Only two patients exhibited anti-B. abortus antibodies. As a result of the risk of chronic Q fever with endocarditis and/or hepatitis, the mode of Coxiella burnetii infection in this population merits further investigation.

An Explanatory Approach to the Political Uses of ICT Initiatives for Participation : Institutions, Context, and Characteristics of the Actors

Political actors use ICTs in a different manner and in different degrees when it comes to achieving a closer relationship between the public and politicians. Usually, political parties develop ICT strategies only for electoral campaigning and therefore restrain ICT usages to providing information and establishing a few channels of communication. By contrast, local governments make much more use of ICT tools for participatory and deliberative purposes. These differences in usages have not been well explained in the literature because of a lack of a comprehensive explanatory model. This chapter seeks to build the basis for this model, that is, to establish which factors affect and condition different political uses of ICTs and which principles underlie that behaviour. We consider that political actors are intentional and their behaviour is mediated by the political institutions and the socioeconomic context of the country. Also, though, the actor¿s own characteristics, such as the type and size of the organization or the model of e-democracy that the actor upholds, can have an influence in launching ICT initiatives for approaching the public.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Membrane interaction of a new synthetic antimicrobial lipopetide sp-85 with broad spectrum activity

Antimicrobial peptides offer a new class of therapeutic agents to which bacteria may not be able todevelop genetic resistance, since their main activity is in the lipid component of the bacterial cell mem-brane. We have developed a series of synthetic cationic cyclic lipopeptides based on natural polymyxin,and in this work we explore the interaction of sp-85, an analog that contains a C12 fatty acid at theN-terminus and two residues of arginine. This analog has been selected from its broad spectrum antibac-terial activity in the micromolar range, and it has a disruptive action on the cytoplasmic membrane ofbacteria, as demonstrated by TEM. In order to obtain information on the interaction of this analog withmembrane lipids, we have obtained thermodynamic parameters from mixed monolayers prepared withPOPG and POPE/POPG (molar ratio 6:4), as models of Gram positive and Gram negative bacteria, respec-tively. LangmuirBlodgett films have been extracted on glass plates and observed by confocal microscopy,and images are consistent with a strong destabilizing effect on the membrane organization induced bysp-85. The effect of sp-85 on the membrane is confirmed with unilamelar lipid vesicles of the same com-position, where biophysical experiments based on fluorescence are indicative of membrane fusion andpermeabilization starting at very low concentrations of peptide and only if anionic lipids are present.Overall, results described here provide strong evidence that the mode of action of sp-85 is the alterationof the bacterial membrane permeability barrier.

Development a distributed simulation environment on a cluster of workstations

Simulation has traditionally been used for analyzing the behavior of complex real world problems. Even though only some features of the problems are considered, simulation time tends to become quite high even for common simulation problems. Parallel and distributed simulation is a viable technique for accelerating the simulations. The success of parallel simulation depends heavily on the combination of the simulation application, algorithm and message population in the simulation is sufficient, no additional delay is caused by this environment. In this thesis a conservative, parallel simulation algorithm is applied to the simulation of a cellular network application in a distributed workstation environment. This thesis presents a distributed simulation environment, Diworse, which is based on the use of networked workstations. The distributed environment is considered especially hard for conservative simulation algorithms due to the high cost of communication. In this thesis, however, the distributed environment is shown to be a viable alternative if the amount of communication is kept reasonable. Novel ideas of multiple message simulation and channel reduction enable efficient use of this environment for the simulation of a cellular network application. The distribution of the simulation is based on a modification of the well known Chandy-Misra deadlock avoidance algorithm with null messages. The basic Chandy Misra algorithm is modified by using the null message cancellation and multiple message simulation techniques. The modifications reduce the amount of null messages and the time required for their execution, thus reducing the simulation time required. The null message cancellation technique reduces the processing time of null messages as the arriving null message cancels other non processed null messages. The multiple message simulation forms groups of messages as it simulates several messages before it releases the new created messages. If the message population in the simulation is suffiecient, no additional delay is caused by this operation A new technique for considering the simulation application is also presented. The performance is improved by establishing a neighborhood for the simulation elements. The neighborhood concept is based on a channel reduction technique, where the properties of the application exclusively determine which connections are necessary when a certain accuracy for simulation results is required. Distributed simulation is also analyzed in order to find out the effect of the different elements in the implemented simulation environment. This analysis is performed by using critical path analysis. Critical path analysis allows determination of a lower bound for the simulation time. In this thesis critical times are computed for sequential and parallel traces. The analysis based on sequential traces reveals the parallel properties of the application whereas the analysis based on parallel traces reveals the properties of the environment and the distribution.

Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Targeted ablation of gonadotropin dependent endocrine tumors in transgenic mice through their luteinizing hormone receptor (LHR)

Gonadal somatic cell and adrenocortical endocrine tumors are rare. The incidence of adrenocortical carcinomas is only 1-2/1000000 a year. However, they are aggressive, especially in adulthood and currently surgery is the only curative treatment. Cytotoxic agents are in use in advanced cancers, but side effects and multidrug resistance are often problems. Thus there is a need for novel curative treatment methods. In contrast, ovarian granulosa cell tumors and testicular Leydig cell tumors are usually benign, especially at a younger age. The aim of the present thesis was to study a novel targeted treatment method through luteinizing hormone/chorionic gonadotropin receptor (LHCGR) in a transgenic mouse tumor model. The cytotoxic agent was lytic peptide Hecate-CGbeta conjugate where 23 amino acid Hecate, a synthetic form of honeybee venom melittin, was conjugated to 15 amino acid fragment of human chorionic gonadotropin β subunit. Lytic peptides are known to act only on negatively charged cells, such as bacteria and cancer cells and hereby, due to hCGbeta fragment, the conjugate is able to bind directly to LHCGR bearing cancer cells, saving the healthy ones. The experiments were carried out in inhibin-alpha-Simian Virus 40-T-antigen transgenic mice that are known to express LHCGR-bearing gonadal tumors, namely Leydig and granulosa cell tumors by 100% penetrance. If the mice are gonadectomized prepubertally they form adrenocortical tumors instead. Transgenic and wild type mice were treated for three consecutive weeks with control vehicle, Hecate or Hecate-CGbeta conjugate. GnRH antagonist or estradiol was given to a group of mice with or without Hecate-CGbeta conjugate to analyze the additive role of gonadotropin blockage in adrenocortical tumor treatment efficacy. Hecate-CGbeta conjugate was able to diminish the gonadal and adrenal tumor size effectively in males. No treatment related side effects were found. Gonadotropin blockage through GnRH antagonist was the best treatment in female adrenal tumors. The mode of cell death by Hecate-CGbeta conjugate was proven to be through necrosis. LHCGR and GATA-4 were co-expressed in tumors, where the treatment down-regulated their expression simultaneously, suggesting their possible use as tumor markers. In conclusion, the present thesis showed that Hecate-CGbeta conjugate targets its action selectively through LHCGR and selectively kills the LHCGR bearing tumor cells. It works both in gonadal somatic and in ectopic LHCGR bearing adrenal tumors. These results establish a more general principle that receptors expressed ectopically in malignant cells can be exploited in targeted cytotoxic therapies without affecting the normal healthy cells.

The chemistry involved in the steam treatment of lignocellulosic materials

Pretreatment of lignocellulosic materials is essential for bioconversion because of the various physical and chemical barriers that greatly inhibit their susceptibility to bioprocesses such as hydrolysis and fermentation. The aim of this article is to review some of the most important pretreatment methods developed to date to enhance the conversion of lignocellulosics. Steam explosion, which precludes the treatment of biomass with high-pressure steam under optimal conditions, is presented as the pretreatment method of choice and its mode of action on lignocellulosics is discussed. The optimal pretreatment conditions for a given plant biomass are defined as those in which the best substrate for hydrolysis is obtained with the least amount of soluble sugars lost to side reactions such as dehydration. Therefore, pretreatment optimization results from a compromise between two opposite trends because hemicellulose recovery in acid hydrolysates can only be maximized at lower pretreatment severities, whereas the development of substrate accessibility requires more drastic pretreatment conditions in which sugar losses are inevitable. To account for this heterogeneity, the importance of several process-oriented parameters is discussed in detail, such as the pretreatment temperature, residence time into the steam reactor, use of an acid catalyst, susceptibility of the pretreated biomass to bioconversion, and process design.