Conceptual structures represented by conceptual graphs and formal concept analysis

Conceptual Graphs and Formal Concept Analysis have in common basic concerns: the focus on conceptual structures, the use of diagrams for supporting communication, the orientation by Peirce's Pragmatism, and the aim of representing and processing knowledge. These concerns open rich possibilities of interplay and integration. We discuss the philosophical foundations of both disciplines, and analyze their specific qualities. Based on this analysis, we discuss some possible approaches of interplay and integration.

Segregation unter Stagnationsbedingungen

Anlass der Untersuchung sind Verstärkungen von strukturwandel- und globalisierungsbedingten Wandlungen unter Schrumpfungs- und Stagnationsbedingungen. Denn Stagnations- und Schrumpfungstendenzen in einer Region sind selektiv, sie begünstigen über verschiedene Mechanismen Polarisierungen und Marginalisierungen: Die allgemeine Entspannung am Wohnungsmarkt hat erhöhte Mobilität und damit sozialräumliche Segregierungen und Polarisierungen der Wohnungsversorgung zur Folge. Leerstände und ausbleibende Investitionen begünstigen Polarisierungen von baulich-räumlichen Qualitäten. Diese beiden Entwicklungen überlagern sich im Stadtraum und verstärken sich gegenseitig. Dabei verbessert sich die Wohnungsversorgung in den benachteiligten Quartieren kaum, so die Ausgangshypothesen. Die Untersuchung fragt nach den Wirkungen des Nebeneinanders von Wachstums-, Stagnations- und Schrumpfungserscheinungen auf unterschiedlichen Maßstabsebenen, dem Zusammenspiel von sozialstrukturellen und qualitativen Veränderungen der baulich-räumlichen Gegebenheiten in den Quartieren sowie in innerstädtischer Differenzierung. Dabei interessieren besonders die Einflüsse eines regional entspannten Wohnungsmarktes und dessen Folgen für die Verwertungsstrategien im Wohnungsbestand auf Segregationsprozesse und die Wohnungsversorgung. Als Fallbeispiel der Untersuchung dient die Stadt Kassel. Der sozialräumliche Fokus liegt auf drei Typen benachteiligter Quartiere: Neben den in der aktuellen Diskussion zumeist betrachteten gründerzeitlichen Arbeiterquartieren und den Großsiedlungen der 1960/70er Jahre wurden auch die peripheren Geschosswohnungsbausiedlungen der 1950er/60er Jahre in die Untersuchung einbezogen, um den unterschiedlichen Rahmenbedingungen und Wirkungen in den Quartierstypen auf die Spur zu kommen und damit letztlich Grundlagen für stadtentwicklungspolitische Strategien zu erarbeiten. Die kleinräumigen Analysen von sozialräumlicher und baulich-räumlicher Struktur sowie zur Wohnungsversorgung deckten Parallelen und gegenläufige Entwicklungen zwischen den unterschiedlichen Quartierstypen auf; es ergaben sich verschiedene Anhaltspunkte zur Erhärtung der Ausgangsthesen. So wurde z.B. deutlich, dass sich unter den Marktbedingungen stagnierender Städte die Wohnflächenversorgung in den benachteiligten Quartieren kaum verbessert. Hierin zeigt sich ein entscheidender Unterschied zu stark schrumpfenden Städten, in denen sich die Versorgungslage (fast) durchgängig verbessert. Wohnungsmarktbarrieren wirken offensichtlich unter Stagnationsbedingungen für bestimmte Bevölkerungsgruppen weiter. Da sich ihre Wirkung aber für weitere Kreise der Bevölkerung abschwächt, verschärfen sich sozialräumliche Konzentrationen. Vor allem aber wurden Überlagerung und gegenseitige Verstärkung dieser sozialräumlichen mit baulich-räumlichen Polarisierungen deutlich, die vor allem aus stadträumlich konzentrierten Investitionen in den Gebäude- und Wohnungsbestand resultieren. Letztlich zeigt sich damit, dass regulierende Eingriffe nicht nur im Rahmen des Umbaus und der Erneuerung der Quartiere erforderlich sind, sondern insbesondere auch in den Wohnungsmarkt und dies auch bei entspannter regionaler Marktlage. Andernfalls ist weder eine angemessene Wohnungsversorgung aller Bevölkerungsgruppen noch der Zusammenhalt der Stadt(Gesellschaft) zu gewährleisten. Dabei ist die Stadtpolitik permanent mit der Gleichzeitigkeit von (wirtschaftlicher) Standortpolitik und sozialer Stadtentwicklung konfrontiert, die sie im Sinne einer nachhaltigen Entwicklung gegeneinander und miteinander abwägen muss.

Gender and Space in Tehran

Abstract: This dissertation generally concentrates on the relationships between “gender” and “space” in the present time of urban life in capital city of Tehran. “Gender” as a changing social construct, differentiated within societies and through time, studied this time by investigation on “gender attitude” or “gender identity” means attitudes towards “gender” issues regarding Tehran residences. “Space” as a concept integrated from physical and social constituents investigated through focus on “spatial attitude” means attitudes towards using “living spaces” including private space of “house”, semi private semi public space of neighborhood and finally public spaces of the city. “Activities and practices” in space concentrated instead of “physical” space; this perspective to “space” discussed as the most justified implication of “space” in this debate regarding current situations in city of Tehran. Under a systematic approach, the interactions and interconnections between “gender” and “space” as two constituent variables of social organization investigated by focus on the different associations presented between different “gender identities” and their different “spatial identities”; in fact, “spatial identity” manifests “gender identity” and in opposite direction, “spatial identity” influences to construction of “gender identity”. The hypotheses of case study in Tehran defined as followed: • “Gender identity” is reflected on “spatial identity”. Various “gender identities” in Tehran present different perspectives of “space” or they identify “space” by different values. • As “gender identity” internalizes patriarchal oppression, it internalizes associated “spatial” oppression too. • Within the same social class, different “gender identities” related to men and women, present interconnected qualities, compared with “gender identities” related to men or women of different social classes. This situation could be found in the “spatial” perspectives of different groups of men and women too. • Following the upper hypotheses, “spatial” oppression differs among social classes of Tehran living in different parts of this city. This research undertook a qualitative study in Tehran by interviewing with different parents of both young daughter and son regarding their attitudes towards gender issues from one side and activities and behaviors of their children in different spaces from the other side. Results of case study indicated the parallel changes of parents’ attitudes towards “gender” and “spatial” issues; it means strong connection between “gender” and “space”. It revealed association of “equal” spatial attitudes with “open, neutral” gender attitudes, and also the association of “biased, unequal” spatial identities with “conservative patriarchal” gender identities. It was cleared too that this variable concept – gender space - changes by “sex”; mothers comparing fathers presented more equitable notions towards “gender spatial” issues. It changes too by “social class” and “educational level”, that means “gender spatial” identity getting more open equitable among more educated people of middle and upper classes. “Breadwinning status in the family” also presents its effect on the changes of “gender spatial” identity so participant breadwinners in the family expressed relatively more equitable notions comparing householders and housekeepers. And finally, “gender spatial” identity changes through “place” in the city and regarding South – North line of the city. The illustration of changes of “gender spatial” identity from “open” to “conservative” among society indicated not only vertical variation across social classes, furthermore the horizontal changing among each social class. These results also confirmed hypotheses while made precision on the third one regarding variable of sex. More investigations pointed to some inclusive spatial attitudes throughout society penetrated to different groups of “gender identities”, to “opens” as to “conservatives”, also to groups between them, by two opposite features; first kind, conservative biased spatial practices in favor of patriarchal gender relations and the second, progressive neutral actions in favor of equal gender relations. While the major reason for the inclusive conservative practices was referred to the social insecurity for women, the second neutral ones associated to more formal & safer spaces of the city. In conclusion, while both trends are associated deeply with the important issues of “sex” & “body” in patriarchal thoughts, still strong, they are the consequences of the transitional period of social change in macro level, and the challenges involved regarding interactions between social orders, between old system of patriarchy, the traditional biased “gender spatial” relations and the new one of equal relations. The case study drew an inhomogeneous illustration regarding gender spatial aspects of life in Tehran, the opposite groups of “open” and “conservative”, and the large group of “semi open semi conservative” between them. In macro perspective it presents contradicted social groups according their general life styles; they are the manifestations of challenging trends towards tradition and modernity in Iranian society. This illustration while presents unstable social situations, necessitates probing solutions for social integration; exploring the directions could make heterogeneous social groups close in the way they think and the form they live in spaces. Democratic approaches like participatory development planning might be helpful for the city in its way to more solidarity and sustainability regarding its social spatial – gender as well – development, in macro levels of social spatial planning and in micro levels of physical planning, in private space of house and in public spaces of the city.

Fliesslochformen und Gewindefurchen in dünne Bleche und Rohre aus Kupfer und Kupferlegierungen

This thesis in Thermal Flow Drilling and Flowtap in thin metal sheet and pipes of copper and copper alloys had as objectives to know the comportment of copper and copper alloys sheet metal during the Thermal Flow Drill processes with normal tools, to know the best Speed and Feed machine data for the best bushing quality, to known the best Speed for Form Tapping processes and to know the best bush long in pure copper pipes for water solar interchange equipment. Thermal Flow Drilling (TFD) and Form Tapping (FT) is one of the research lines of the Institute of Production and Logistics (IPL) at University of Kassel. At December 1995, a work meeting of IPL, Santa Catarina University, Brazil, Buenos Aires University, Argentine, Tarapacá University (UTA), Chile members and the CEO of Flowdrill B.V. was held in Brazil. The group decided that the Manufacturing Laboratory (ML) of UTA would work with pure copper and brass alloys sheet metal and pure copper pipes in order to develop a water interchange solar heater. The Flowdrill BV Company sent tools to Tarapacá University in 1996. In 1999 IPL and the ML carried out an ALECHILE research project promoted by the DAAD and CONICyT in copper sheet metal and copper pipes and sheet metal a-brass alloys. The normal tools are lobed, conical tungsten carbide tool. When rotated at high speed and pressed with high axial force into sheet metal or thin walled tube generated heat softens the metal and allows the drill to feed forward produce a hole and simultaneously form a bushing from the displacement material. In the market exist many features but in this thesis is used short and longs normal tools of TFD. For reach the objectives it was takes as references four qualities of the frayed end bushing, where the best one is the quality class I. It was used pure copper and a-brass alloys sheet metals, with different thickness. It was used different TFD drills diameter for four thread type, from M-5 to M10. Similar to the Aluminium sheet metals studies it was used the predrilling processes with HSS drills around 30% of the TFD diameter (1,5 – 3,0 mm D). In the next step is used only 2,0 mm thick metal sheet, and 9,2 mm TFD diameter for M-10 thread. For the case of pure commercial copper pipes is used for ¾” inch diameter and 12, 8 mm (3/8”) TFD drill for holes for 3/8” pipes and different normal HSS drills for predrilling processes. The chemical sheet metal characteristics were takes as reference for the material behaviour. The Chilean pure copper have 99,35% of Cu and 0,163% of Zinc and the Chilean a-brass alloys have 75,6% of Cu and 24,0% of Zinc. It is used two German a-brass alloys; Nº1 have 61,6% of Cu, 36,03 % of Zinc and 2,2% of Pb and the German a-brass alloys Nº2 have 63,1% of Cu, 36,7% of Zinc and 0% of Pb. The equipments used were a HAAS CNC milling machine centre, a Kistler dynamometer, PC Pentium II, Acquisition card, TESTPOINT and XAct software, 3D measurement machine, micro hardness, universal test machine, and metallographic microscope. During the test is obtained the feed force and momentum curves that shows the material behaviour with TFD processes. In general it is take three phases. It was possible obtain the best machining data for the different sheet of copper and a-brass alloys thick of Chilean materials and bush quality class I. In the case of a-brass alloys, the chemical components and the TFD processes temperature have big influence. The temperature reach to 400º Celsius during the TFD processes and the a-brass alloys have some percents of Zinc the bush quality is class I. But when the a-brass alloys have some percents of Lead who have 200º C melting point is not possible to obtain a bush, because the Lead gasify and the metallographic net broke. During the TFD processes the recrystallization structures occur around the Copper and a-brass alloy bush, who gives more hardness in these zones. When the threads were produce with Form Tapping processes with Flowtap tools, this hardness amount gives a high limit load of the thread when hey are tested in a special support that was developed for it. For eliminated the predrilling processes with normal HSS drills it was developed a compound tool. With this new tool it was possible obtain the best machining data for quality class I bush. For the copper pipes it is made bush without predrilling and the quality class IV was obtained. When it is was used predrilling processes, quality classes I bush were obtained. Then with different HSS drill diameter were obtained different long bush, where were soldering with four types soldering materials between pipes with 3/8” in a big one as ¾”. Those soldering unions were tested by traction test and all the 3/8” pipes broken, and the soldering zone doesn’t have any problem. Finally were developed different solar water interchange heaters and tested. As conclusions, the present Thesis shows that the Thermal Flow Drilling in thinner metal sheets of cooper and cooper alloys needs a predrilling process for frayed end quality class I bushings, similar to thinner sheets of aluminium bushes. The compound tool developed could obtain quality class I bushings and excludes predrilling processes. The bush recrystalization, product of the friction between the tool and the material, the hardness grows and it is advantageous for the Form Tapping. The methodology developed for commercial copper pipes permits to built water solar interchange heaters.

Die Natur als Erholungs(t)raum

Zur Erholung in die Natur gehen oder doch lieber zur Natursimulation greifen? Intuitiv würden die meisten Menschen der Natur einen größeren Erholungswert zusprechen als einer Natursimulation. Aber ist die Natur tatsächlich erholsamer? In der Naturerholungsforschung (Restorative Environment Research) kommen häufig Natursimulationen zum Einsatz, um die erholsame Wirkung von Natur zu ermitteln. Problematisch ist dabei, dass deren ökologische Validität und Vergleichbarkeit noch nicht empirisch abgesichert ist. Vorliegende Arbeit setzt an dieser methodischen und empirischen Lücke an. Sie überprüft sowohl die ökologische Validität als auch die Vergleichbarkeit von Natursimulationen. Dazu wird die erholsame Wirkung von zwei Natursimulationen im Vergleich zu der physisch-materiellen Natur empirisch untersucht und verglichen. Darüber hinaus werden Aspekte des subjektiven Erlebens und der Bewertung im Naturerholungskontext exploriert. Als bedeutsamer Wirkmechanismus wird die erlebnisbezogene Künstlichkeit/Natürlichkeit angesehen, die sich auf die Erlebnisqualität von Natursimulationen und der physisch-materiellen Natur bezieht: Natursimulationen weisen im Vergleich zur physisch-materiellen Natur eine reduzierte Erlebnisqualität auf (erlebnisbezogene Künstlichkeit), z.B. eine reduzierte Qualität und Quantität der Sinnesansprache. Stellt man einen derartigen Vergleich nicht nur mit der physisch-materiellen Natur, sondern mit unterschiedlichen Natursimulationstypen an, dann zeigen sich auch hier Unterschiede in der erlebnisbezogenen Künstlichkeit. Beispielsweise unterscheidet sich ein Naturfoto von einem Naturfilm durch das Fehlen von auditiven und bewegten Stimuli. Diese erlebnisbezogene Künstlichkeit kann die erholsame Wirkung von Natur - direkt oder indirekt über Bewertungen - hemmen. Als Haupthypothese wird angenommen, dass mit zunehmendem Ausmaß an erlebnisbezogener Künstlichkeit die erholsame Wirkung der Natur abnimmt. Dem kombinierten Feld- und Laborexperiment liegt ein einfaktorielles Vorher-Nachher-Design zugrunde. Den 117 Probanden wurde zunächst eine kognitiv und affektiv belastende Aufgabe vorgelegt, danach folgte die Erholungsphase. Diese bestand aus einem Spaziergang, der entweder in der physisch-materiellen Natur (urbaner Park) oder in einer der beiden audio-visuellen Natursimulationen (videogefilmter vs. computergenerierter Spaziergang durch selbigen urbanen Park) oder auf dem Laufband ohne audio-visuelle Darbietung stattfand. Die erlebnisbezogene Künstlichkeit/Natürlichkeit wurde also wie folgt operationlisiert: die physische Natur steht für die erlebnisbezogene Natürlichkeit. Die beiden Natursimulationen stehen für die erlebnisbezogene Künstlichkeit. Die computergenerierte Version ist im Vergleich zur Videoversion erlebnisbezogen künstlicher, da sie weniger fotorealistisch ist. Die Zuordnung zu einer der vier experimentellen Erholungssettings erfolgte nach dem Zufallsprinzip. Die Effekte von moderater Bewegung wurden in den Natursimulationen durch das Laufen auf dem Laufband kontrolliert. Die Beanspruchungs- bzw. Erholungsreaktionen wurden auf kognitiver (Konzentriertheit, Aufmerksamkeitsleistung) affektiver (3 Befindlichkeitsskalen: Wachheit, Ruhe, gute Stimmung) und physiologischer (Alpha-Amylase) Ebene gemessen, um ein umfassendes Bild der Reaktionen zu erhalten. Insgesamt zeigen die Ergebnisse, dass die beiden Natursimulationen trotz Unterschiede in der erlebnisbezogenen Künstlichkeit/Natürlichkeit zu relativ ähnlichen Erholungsreaktionen führen, wie die physisch-materielle Natur. Eine Ausnahme stellen eine der drei affektiven (Wachheit) und die physiologische Reaktion dar: Probanden der physisch-materiellen Naturbedingung geben an wacher zu sein und weisen - wider erwarten - eine höhere physiologische Erregung auf. Demnach ist die physisch-materielle Natur nicht grundsätzlich erholsamer als die Natursimulationen. Die Hypothese ließ sich somit nicht bestätigen. Vielmehr deuten sich komplexe Erholungsmuster und damit auch unterschiedliche Erholungsqualitäten der Settings an, die einer differenzierten Betrachtung bedürfen. Für die ökologische Validität von Natursimulationen gilt, dass diese nur mit Einschränkung als ökologisch valide bezeichnet werden können, d.h. nur für bestimmte, aber nicht für alle Erholungsreaktionen. Die beiden Natursimulationen führen ebenfalls trotz Unterschiede in der erlebnisbezogenen Künstlichkeit zu ähnlichen Erholungsreaktionen und können somit als gleichwertig behandelt werden. Erstaunlicherweise kommt es hier zu ähnlichen Erholungsreaktionen, obwohl die bestehenden Unterschiede von den Probanden wahrgenommen und die erlebnisbezogen künstlichere computergenerierte Version negativer bewertet wird. Aufgrund der nicht erwartungskonformen Ergebnisse muss das Erklärungskonzept der erlebnisbezogenen Künstlichkeit/Natürlichkeit infrage gestellt werden. Alternative Erklärungskonzepte für die Ergebnisse („Ungewissheit“, mentale räumliche Modelle), die sich andeutenden unterschiedlichen Erholungsqualitäten der Settings, methodische Einschränkungen sowie die praktische Bedeutung der Ergebnisse werden kritisch diskutiert.

Landschaftsperspektiven der Nutzer

Die vorliegende Arbeit macht Vorschläge zur Einbindung der Öffentlichkeit in Planungsbestrebungen vor Ort, wobei vor allem Methoden empirischer Sozialforschung und deren Anwendbarkeit in landschaftsplanerischen Vorhaben näher betrachtet werden. Hiermit finden insbesondere Wertezuweisungen durch die Bürger stärkere Berücksichtigung. Es wird angenommen, dass, um eine zukunftsweisende Landschaftsplanung zu etablieren, Planer und Fachleute lernen müssen, wie die lokale Bevölkerung ihre Umwelt wahrnimmt und empfindet und welche Ideen sie für die zukünftige Entwicklung der Landschaft haben. Als empirische Grundlage werden Fallstudien aus Bad Soden am Taunus, Hamburg-Wilhelmsburg und Kassel-Rothenditmold präsentiert und verglichen. Rothenditmold und Wilhelmsburg zeichnen sich durch hohe Einwohneranteile mit Migrationshintergrund aus, weisen relativ hohe Arbeitslosenquoten auf und sind als soziale Brennpunkte bekannt – zumindest für Außenstehende. Beide Stadtteile versuchen ihr Image aufzuwerten. In Wilhelmsburg wird dieses Vorhaben in die großräumigen Veränderungen eingebunden, die von verschiedenen Hamburger Großprojekten ausstrahlen. In Rothenditmold ist vor allem Eigeninitiative durch den Stadtteil selbst gefragt. In Bad Soden gibt es ebenfalls viele Menschen mit ausländischen Wurzeln. Sie gehören allerdings mehrheitlich der gesellschaftlichen Mittel- und Oberschicht an. Bad Soden verfügt über ein insgesamt positives Image, das aller kulturellen Veränderungen zum Trotz beibehalten werden soll. Entsprechende Initiativen gehen hier ebenfalls von der Gemeinde selbst aus. An allen Standorten hat es drastische Landschaftsveränderungen und speziell deren Erscheinung gegeben. Bad Soden und Wilhelmsburg haben dabei Teile ihres vormals ländlichen Charakters zu bewahren, während in Rothenditmold vor allem Zeugnisse aus der Zeit der Industrialisierung erhalten sind und den Ort prägen. Die Landschaften haben jeweils ihre einzigartigen Erscheinungen. Zumindest Teile der Landschaften ermöglichen eine Identifikation, sind attraktiv und liefern gute Erholungsmöglichkeiten. Um diese Qualitäten zu bewahren, müssen sie entsprechend gepflegt und weiter entwickelt werden. Dazu sind die Interessen und Wünsche der Bewohner zu ermitteln und in Planungen einzuarbeiten. Die Arbeit strebt einen Beitrag zur Lebensraumentwicklung für und mit Menschen an, die mittels ausgewählter Methoden der empirischen Sozialforschung eingebunden werden. Dabei wird gezeigt, dass die vorgestellten und erprobten Methoden sinnvoll in Projekte der Landschaftsplanung eingebunden werden können. Mit ihnen können ergänzende Erkenntnisse zum jeweiligen Landschaftsraum gewonnen werden, da sie helfen, die kollektive Wahrnehmung der Landschaft durch die Bevölkerung zu erfassen, um sie anschließend in Planungsentwürfe einbinden zu können. Mit der Untersuchung wird in den drei vorgestellten Fallstudien exemplarisch erfasst, welche Elemente der Landschaft für die Bewohner von besonderer Bedeutung sind. Darüber hinaus lernen Planer, welche Methoden zur Ermittlung emotionaler Landschaftswerte verfügbar sind und auf welcher Ebene der Landschaftsplanung sowie bei welchen Zielgruppen sie eingesetzt werden können. Durch die Verknüpfung landschaftsplanerischer Erfassungsmethoden mit Methoden der empirischen Sozialwissenschaft (Fragebogen, Interviews, „Spaziergangsinterviews“, gemeinsame Erarbeitung von Projekten bis zur Umsetzung) sowie der Möglichkeit zur Rückkoppelung landschaftsplaneri-scher Entwürfe mit der Bevölkerung wird eine Optimierung dieser Entwürfe sowohl im Sinne der Planer als auch im Sinne der Bürger erreicht. Zusätzlich wird die Wahrnehmung teilnehmender Bevölkerung für ihre Umwelt geschärft, da sie aufgefordert wird, sich mit ihrer Lebensumgebung bewusst auseinander zu setzen. Die Ergebnisse dieser Untersuchung sind Beitrag und Beleg zu der Annahme, dass ergänzende Methoden in der Landschaftsplanung zur stärkeren Interessenberücksichtigung der von Planung betroffenen Menschen benötigt werden. Zudem zeigen die Studien auf, wie man dem planungsethischen Anspruch, die Öffentlichkeit einzubeziehen, näher kommt. Resultat sind eine bessere Bewertung und Akzeptanz der Planungen und das nicht nur aus landschaftsplanerisch-fachlicher Sicht. Landschaftsplaner sollten ein Interesse daran haben, dass ihre Entwürfe ernst genommen und akzeptiert werden. Das schaffen sie, wenn sie der Bevölkerung nicht etwas aufplanen, sondern ihnen entsprechende Einflussmöglichkeiten bieten und Landschaft mit ihnen gemeinsam entwickeln.

Cleanliness versus cow comfort – an insolvable problem?

Cubicle should provide good resting comfort as well as clean udders. Dairy cows in cubicle houses often face a restrictive environment with regard to resting behaviour, whereas cleanliness may still be impaired. This study aimed to determine reliable behavioural measures regarding resting comfort applicable in on-farm welfare assessments. Furthermore, relationships between cubicle design, cow sizes, management factors and udder cleanliness (namely teats and teat tips) were investigated. Altogether 15 resting measures were examined in terms of feasibility, inter-observer reliability (IOR) and consistency of results per farm over time. They were recorded during three farm visits on farms in Germany and Austria with cubicle, deep litter and tie stall systems. Seven measures occurred to infrequently to allow reliable recording within a limited observation time. IOR was generally acceptable to excellent except for 'collisions during lying down', which only showed good IOR after improvement of the definition. Only three measures were acceptably repeatable over time: 'duration of lying down', 'percentage of collisions during lying down' and 'percentage of cows lying partly or completely outside lying area'. These measures were evaluated as suitable animal based welfare measures regarding resting behaviour in the framework of an on-farm welfare assessment protocol. The second part of the thesis comprises a cross-sectional study on resting comfort and cow cleanliness including 23 Holstein Friesian dairy herds with very low within-farm variation in cubicle measures. Height at withers, shoulder width and diagonal body length were measured in 79-100 % of the cows (herd size 30 to115 cows). Based on the 25 % largest animals, compliance with recommendations for cubicle measures was calculated. Cleanliness of different body parts, the udder, teats and teat tips was assessed for each cow in the herd prior to morning milking. No significant correlation was found between udder soiling and teat or teat tip soiling on herd level. The final model of a stepwise regression regarding the percentage of dirty teats per farm explained 58.5 % the variance and contained four factors. Teat dipping after milking which might be associated with an overall clean and accurate management style, deep bedded cubicles, increasing cubicle maintenance times and decreasing compliance concerning total cubicle length predicted lower teat soiling. The final model concerning teat tip soiling explained 46.0 % of the variance and contained three factors. Increasing litter height in the rear part of the cubicle and increased alley soiling which is difficult to explain, predicted for less soiled teat tips, whereas increasing compliance concerning resting length was associated with higher percentages of dirty teat tips. The dependent variable ‘duration of lying down’ was analysed using again stepwise regression. The final model explained 54.8 % of the total variance. Lying down duration was significantly shorter in deep bedded cubicles. Further explanatory though not significant factors in the model were neck-rail height, deep bedding or comfort mattresses versus concrete floor or rubber mats and clearance height of side partitions. In the attempt to create a more comprehensive lying down measure, another analysis was carried out with percentage of ‘impaired lying down’ (i.e. events exceeding 6.3 seconds, with collisions or being interrupted) as dependent variable. The explanatory value of this final model was 41.3 %. An increase in partition length, in compliance concerning cubicle width and the presence of straw within bedding predicted a lower proportion of impaired lying down. The effect of partition length is difficult to interpret, but partition length and height were positively correlated on the study farms, possibly leading to a bigger zone of clear space for pelvis freedom. No associations could be found between impaired lying down and teat or teat tip soiling. Altogether, in agreement with earlier studies it was found that cubicle dimensions in practice are often inadequate with regard to the body dimensions of the cows, leading to high proportions of impaired lying down behaviour, whereas teat cleanliness is still unsatisfactory. Connections between cleanliness and cow comfort are far from simplistic. Especially the relationship between cubicle characteristics and lying down behaviour apparently is very complex, so that it is difficult to identify single influential factors that are valid for all farm situations. However, based on the results of the present study the use of deep bedded cubicles can be recommended as well as improved management with special regard to cubicle and litter maintenance in order to achieve both better resting comfort and teat cleanliness.

Exploratory and dust-bathing behaviour in laying hens kept in commercial aviaries and furnished cages

The aim of the present thesis was to identify management factors that affect the extent of exploratory behaviour (ground pecking, scratching) as well as quantitative and qualitative as-pects of dust-bathing behaviour in laying hens kept in commercial furnished cages (‘small group housing’) and aviaries. Based on the results, it should be considered which management measures can be recommended for farmers to enhance hen welfare. The feasibility of direct observations of dust-bathing behaviour as well as video observations of exploratory and dust-bathing behaviour was tested in two aviaries. The direct observations were judged to be unfeasible under the conditions encountered. For the analysis of the video recordings, different sampling intervals for instantaneous scan sampling, different extents of observation time, and intra- and inter-observer reliabilities were compared and the most ap-propriate observation scheme selected. Applying the selected scheme (observing the first 16 minutes of every hour distributed over two consecutive light days with a sample interval of two minutes), within the range of environmental conditions found in 22 aviaries, pecking, scratching and dust-bathing behaviour was performed on average 25, 2 and 7 % of the obser-vation time. Hen numbers in the litter were positively associated with stocking density and group size. More scratching was performed with increasing litter height as well as in humid litter. If no litter had been provided, thus substrate consisted of dust and faeces, a reduced proportion of dust-bathing was found. The same method was then used in 16 furnished cage systems. On average 12 % of the total hen number were found on the scratching mats. The hens spent 8 % of the observed time pecking at the mat, 4 % dust-bathing and 0.4 % scratch-ing. Higher proportions were found on the mats and more dust-bathing behaviour occurred, if substrate was provided. Also with increasing light intensity and stocking density more hens were observed on the mats. More pecking and scratching occurred in conditions of higher stocking density, probably due to social facilitation, and of increased mat area per hen. With increasing mat numbers per cage less pecking was observed. Wider mats led to increased dust-bathing behaviour. Finally, 129 dust-baths recorded in 17 aviaries were analysed in detail. On average they lasted 17 minutes, with the tossing phase taking 69 % of this time, including on average 2 vertical wing shakes and 3 scratches with one leg per minute tossing phase. Dust-bath duration de-creased with increasing litter height. Litter type influenced all recorded parameters: dust-bath duration was highest on straw and lowest on fine material and fine material mixed with straw, where on both also the proportion of the tossing phase was lowest. The number of vertical wing shakes during the dust-bath was highest on straw and lowest on fine material mixed with straw as against the frequency of vertical wing shaking that was lowest on straw and highest on fine material. If dust-bathing hens were disturbed twice or more, dust-bathing duration decreased. With increasing light intensity a decreased proportion of the tossing phase as well as a reduced number of vertical wing shakes were recorded. Possibly the light stimulated the hens to dust-bath more often with less tossing behaviour per performance. The observed variation of the dust-bathing parameters could reflect successful adaptation or frustration of the hens. The litter and light conditions on the investigated farms were predominantly restrictive in terms of stimulation of exploration and dust-bathing behaviour. Thus, it was only possible to analyse possible associations between these factors and exploration and dust-bathing behav-iour within the range found. Based on the results the following management recommendations can be given: To allow hens in furnished cages more normal activity, substrate availability should be improved and mat space and light intensity increased. With regard to aviaries as well litter availability should be improved. Litter height should not be too low. Disturbances during dust-bathing should be prevented, but no influencing factors could be identified.

Effects of different tillage treatments on labile soil organic matter pools and stabilization processes

An improved understanding of soil organic carbon (Corg) dynamics in interaction with the mechanisms of soil structure formation is important in terms of sustainable agriculture and reduction of environmental costs of agricultural ecosystems. However, information on physical and chemical processes influencing formation and stabilization of water stable aggregates in association with Corg sequestration is scarce. Long term soil experiments are important in evaluating open questions about management induced effects on soil Corg dynamics in interaction with soil structure formation. The objectives of the present thesis were: (i) to determine the long term impacts of different tillage treatments on the interaction between macro aggregation (>250 µm) and light fraction (LF) distribution and on C sequestration in plots differing in soil texture and climatic conditions. (ii) to determine the impact of different tillage treatments on temporal changes in the size distribution of water stable aggregates and on macro aggregate turnover. (iii) to evaluate the macro aggregate rebuilding in soils with varying initial Corg contents, organic matter (OM) amendments and clay contents in a short term incubation experiment. Soil samples were taken in 0-5 cm, 5-25 cm and 25-40 cm depth from up to four commercially used fields located in arable loess regions of eastern and southern Germany after 18-25 years of different tillage treatments with almost identical experimental setups per site. At each site, one large field with spatially homogenous soil properties was divided into three plots. One of the following three tillage treatments was carried in each plot: (i) Conventional tillage (CT) with annual mouldboard ploughing to 25-30 cm (ii) mulch tillage (MT) with a cultivator or disc harrow 10-15 cm deep, and (iii) no tillage (NT) with direct drilling. The crop rotation at each site consisted of sugar beet (Beta vulgaris L.) - winter wheat (Triticum aestivum L.) - winter wheat. Crop residues were left on the field and crop management was carried out following the regional standards of agricultural practice. To investigate the above mentioned research objectives, three experiments were conducted: Experiment (i) was performed with soils sampled from four sites in April 2010 (wheat stand). Experiment (ii) was conducted with soils sampled from three sites in April 2010, September 2011 (after harvest or sugar beet stand), November 2011 (after tillage) and April 2012 (bare soil or wheat stand). An incubation study (experiment (iii)) was performed with soil sampled from one site in April 2010. Based on the aforementioned research objectives and experiments the main findings were: (i) Consistent results were found between the four long term tillage fields, varying in texture and climatic conditions. Correlation analysis of the yields of macro aggregate against the yields of free LF ( ≤1.8 g cm-3) and occluded LF, respectively, suggested that the effective litter translocation in higher soil depths and higher litter input under CT and MT compensated in the long term the higher physical impact by tillage equipment than under NT. The Corg stocks (kg Corg m−2) in 522 kg soil, based on the equivalent soil mass approach (CT: 0–40 cm, MT: 0–38 cm, NT: 0–36 cm) increased in the order CT (5.2) = NT (5.2) < MT (5.7). Significantly (p ≤ 0.05) highest Corg stocks under MT were probably a result of high crop yields in combination with reduced physical tillage impact and effective litter incorporation, resulting in a Corg sequestration rate of 31 g C-2 m-2 yr-1. (ii) Significantly higher yields of macro aggregates (g kg-2 soil) under NT (732-777) and MT (680-726) than under CT (542-631) were generally restricted to the 0-5 cm sampling depth for all sampling dates. Temporal changes on aggregate size distribution were only small and no tillage induced net effect was detectable. Thus, we assume that the physical impact by tillage equipment was only small or the impact was compensated by a higher soil mixing and effective litter translocation into higher soil depths under CT, which probably resulted in a high re aggregation. (iii) The short term incubation study showed that macro aggregate yields (g kg-2 soil) were higher after 28 days in soils receiving OM (121.4-363.0) than in the control soils (22.0-52.0), accompanied by higher contents of microbial biomass carbon and ergosterol. Highest soil respiration rates after OM amendments within the first three days of incubation indicated that macro aggregate formation is a fast process. Most of the rebuilt macro aggregates were formed within the first seven days of incubation (42-75%). Nevertheless, it was ongoing throughout the entire 28 days of incubation, which was indicated by higher soil respiration rates at the end of the incubation period in OM amended soils than in the control soils. At the same time, decreasing carbon contents within macro aggregates over time indicated that newly occluded OM within the rebuilt macro aggregates served as Corg source for microbial biomass. The different clay contents played only minor role in macro aggregate formation under the particular conditions of the incubation study. Overall, no net changes on macro aggregation were identified in the short term. Furthermore, no indications for an effective Corg sequestration on the long term under NT in comparison to CT were found. The interaction of soil disturbance, litter distribution and the fast re aggregation suggested that a distinct steady state per tillage treatment in terms of soil aggregation was established. However, continuous application of MT with a combination of reduced physical tillage impact and effective litter incorporation may offer some potential in improving the soil structure and may therefore prevent incorporated LF from rapid decomposition and result in a higher C sequestration on the long term.

Farmers’ desired traits and selection criteria for maize varieties and their implications for maize breeding: A case study from KwaZulu-Natal Province, South Africa

Adoption of hybrids and improved varieties has remained low in the smallholder farming sector of South Africa, despite maize being the staple food crop for the majority of households. The objective of this study was to establish preferred maize characteristics by farmers which can be used as selection criteria by maize breeders in crop improvement. Data were collected from three villages of a selected smallholder farming area in South Africa using a survey covering 300 households and participatory rural appraisal methodology. Results indicated a limited selection of maize varieties grown by farmers in the area compared to other communities in Africa. More than 97% of the farmers grew a local landrace called Natal-8-row or IsiZulu. Hybrids and improved open pollinated varieties were planted by less than 40% of the farmers. The Natal-8-row landrace had characteristics similar to landraces from eastern and southern Africa and closely resembled Hickory King, a landrace still popular in Southern Africa. The local landrace was preferred for its taste, recycled seed, tolerance to abiotic stresses and yield stability. Preferred characteristics of maize varieties were high yield and prolificacy, disease resistance, early maturity, white grain colour, and drying and shelling qualities. Farmers were willing to grow hybrids if the cost of seed and other inputs were affordable and their preferences were considered. Our results show that breeding opportunities exist for improving the farmers’ local varieties and maize breeders can take advantage of these preferred traits and incorporate them into existing high yielding varieties.

Causes of legume rotation induced yield increases in cereals grown on West African soils

This study was conducted to investigate soil biological and chemical factors that give rise to cereal yield enhancing effects of legume rotations on sandy, nutrient poor West African soils. The aim was not only to gain more information on the role of legume residues and microorganisms in the soil nutrient cycle. But the study aimed at evaluating if differences in substrate qualities (e.g. root residues) cause changes in the microbial community structure due to specific and highly complex microbe-root-soil interactions. Site and system specific reactions of microorganisms towards rewetting, simulating the onset of rainy season, were observed. Higher respiration rates, higher amounts of microbial biomass carbon (Cmic) and nitrogen (Nmic) as well as higher ergosterol, muramic acid, glucosamine and adenylate concentrations were measured in CL soils of Koukombo and in both soils from Fada. The immediate increase in ATP concentrations after rewetting was likely caused by rehydration of microbial cells where N was not immobilized and, thus, available for plants facilitating their rapid development. Legume root residues led only to slightly better plant performances compared to the control, while the application of cereal roots reduced seedling growth. In contrast to sorghum seedlings, the microbial community did not react to the mineral treatment. Thus the energy supply in form of organic amendments increased microbial indices compared to mineral P application and the control. The results of basal respiration rates, Cmic and Corg levels indicate that the microbial community in the soil from Koukombo is less efficient in substrate use compared to microorganisms in the soil from Fada. However, the continuous carbon input by legume root residues might have contributed to these differences in soil fertility. With the 33P isotopic exchange method a low buffering capacity was detected in both soils irrespective of treatments. Calculated E values (E1min to E1min-1d and E1d-3m) indicated a slowly release of P due to root turnover while applied mineral P is taken up by plants or fixed to the soil. Due to the fact that sorghum growth reacted mainly to the application of mineral P and the microorganisms solely to the organic inputs, the combination of both amendments seems to be the best approach to a sustainable increase of crop production on many nutrient-poor, sandy West African soils. In a pot experiment, were CC and CL soils from Fada and Koukombo were adjusted to the same level of P and N concentrations, crop growth was significantly higher on CL soils, compared to the respective treatments on CC soils. Mycorrhizal infection of roots was increased and the number of nematodes, predominantly free living nematodes, was almost halfed on rotation soils. In conclusion, increased nutrient availability (especially P and N) through the introduction of legumes is not the only reason for the observed yield increasing effects. Soil biological factors seem to also play an important role. In a root chamber experiment the pH gradient along the root-soil-interface was measured at three times using an antimony microelectrode. For Fada soils, pH values were higher on CL than CC soils while the opposite was true for the Koukombo soils. Site-specific differences between Fada and Koukombo soils in N content and microbial community structures might have created varying crop performances leading to the contrasting pH findings. However, the mechanisms involved in this highly complex microbe-root-soil interaction remain unclear.

Optimierung von Betriebsstrategien für elektrifizierte Antriebskonzepte

Im Rahmen dieser Arbeit wird eine gemeinsame Optimierung der Hybrid-Betriebsstrategie und des Verhaltens des Verbrennungsmotors vorgestellt. Die Übernahme von den im Steuergerät verwendeten Funktionsmodulen in die Simulationsumgebung für Fahrzeuglängsdynamik stellt eine effiziente Applikationsmöglichkeit der Originalparametrierung dar. Gleichzeitig ist es notwendig, das Verhalten des Verbrennungsmotors derart nachzubilden, dass das stationäre und das dynamische Verhalten, inklusive aller relevanten Einflussmöglichkeiten, wiedergegeben werden kann. Das entwickelte Werkzeug zur Übertragung der in Ascet definierten Steurgerätefunktionen in die Simulink-Simulationsumgebung ermöglicht nicht nur die Simulation der relevanten Funktionsmodule, sondern es erfüllt auch weitere wichtige Eigenschaften. Eine erhöhte Flexibilität bezüglich der Daten- und Funktionsstandänderungen, sowie die Parametrierbarkeit der Funktionsmodule sind Verbesserungen die an dieser Stelle zu nennen sind. Bei der Modellierung des stationären Systemverhaltens des Verbrennungsmotors erfolgt der Einsatz von künstlichen neuronalen Netzen. Die Auswahl der optimalen Neuronenanzahl erfolgt durch die Betrachtung des SSE für die Trainings- und die Verifikationsdaten. Falls notwendig, wird zur Sicherstellung der angestrebten Modellqualität, das Interpolationsverhalten durch Hinzunahme von Gauß-Prozess-Modellen verbessert. Mit den Gauß-Prozess-Modellen werden hierbei zusätzliche Stützpunkte erzeugt und mit einer verminderten Priorität in die Modellierung eingebunden. Für die Modellierung des dynamischen Systemverhaltens werden lineare Übertragungsfunktionen verwendet. Bei der Minimierung der Abweichung zwischen dem Modellausgang und den Messergebnissen wird zusätzlich zum SSE das 2σ-Intervall der relativen Fehlerverteilung betrachtet. Die Implementierung der Steuergerätefunktionsmodule und der erstellten Steller-Sensor-Streckenmodelle in der Simulationsumgebung für Fahrzeuglängsdynamik führt zum Anstieg der Simulationszeit und einer Vergrößerung des Parameterraums. Das aus Regelungstechnik bekannte Verfahren der Gütevektoroptimierung trägt entscheidend zu einer systematischen Betrachtung und Optimierung der Zielgrößen bei. Das Ergebnis des Verfahrens ist durch das Optimum der Paretofront der einzelnen Entwurfsspezifikationen gekennzeichnet. Die steigenden Simulationszeiten benachteiligen Minimumsuchverfahren, die eine Vielzahl an Iterationen benötigen. Um die Verwendung einer Zufallsvariablen, die maßgeblich zur Steigerung der Iterationanzahl beiträgt, zu vermeiden und gleichzeitig eine Globalisierung der Suche im Parameterraum zu ermöglichen wird die entwickelte Methode DelaunaySearch eingesetzt. Im Gegensatz zu den bekannten Algorithmen, wie die Partikelschwarmoptimierung oder die evolutionären Algorithmen, setzt die neu entwickelte Methode bei der Suche nach dem Minimum einer Kostenfunktion auf eine systematische Analyse der durchgeführten Simulationsergebnisse. Mit Hilfe der bei der Analyse gewonnenen Informationen werden Bereiche mit den bestmöglichen Voraussetzungen für ein Minimum identifiziert. Somit verzichtet das iterative Verfahren bei der Bestimmung des nächsten Iterationsschrittes auf die Verwendung einer Zufallsvariable. Als Ergebnis der Berechnungen steht ein gut gewählter Startwert für eine lokale Optimierung zur Verfügung. Aufbauend auf der Simulation der Fahrzeuglängsdynamik, der Steuergerätefunktionen und der Steller-Sensor-Streckenmodelle in einer Simulationsumgebung wird die Hybrid-Betriebsstrategie gemeinsam mit der Steuerung des Verbrennungsmotors optimiert. Mit der Entwicklung und Implementierung einer neuen Funktion wird weiterhin die Verbindung zwischen der Betriebsstrategie und der Motorsteuerung erweitert. Die vorgestellten Werkzeuge ermöglichten hierbei nicht nur einen Test der neuen Funktionalitäten, sondern auch eine Abschätzung der Verbesserungspotentiale beim Verbrauch und Abgasemissionen. Insgesamt konnte eine effiziente Testumgebung für eine gemeinsame Optimierung der Betriebsstrategie und des Verbrennungsmotorverhaltens eines Hybridfahrzeugs realisiert werden.

Microbial response to restoration of tantalite mine soils in western Rwanda

Artisanal columbite-tantalite (coltan) mining has had negative effects on the rural economy in the great Lakes region of Africa through labor deficits, degradation and loss of farmland, food insecurity, high cost of living, and reduced traditional export crop production alongside secondary impacts that remotely affect the quality of air, water, soil, plants, animals, and human wellbeing. The situation is multifaceted and calls for a holistic approach for short and long-term mitigation of such negative effects. This study focuses on the effects of mine land restoration on soil microbiological quality in the Gatumba Mining District of western Rwanda. Some coltan mine wastelands were afforested with pine and eucalyptus trees while farmers directly cultivated others due to land scarcity. Farmyard manure (FYM) is the sole fertilizer applied on the wastelands although it is insufficient to achieve the desired crop yields. Despite this, several multi-purpose plants such as Tithonia diversifolia, Markhamia lutea, and Canavalia brasiliensis thrive in the area and could supplement FYM. The potential for these “new” amendments to improve soil microbial properties, particularly in the tantalite mine soils was investigated. The specific objectives of the study were to: (a) evaluate the effects of land use on soil microbial indices of the tantalite mine soils; (b) investigate the restorative effects of organic amendments on a Technosol; and (c) estimate the short-term N and P supply potential of the soil amendments in the soils. Fresh soils (0-20 cm) from an unmined native forest, two mine sites afforested with pine and eucalyptus forests (pine and eucalyptus Technosols), an arable land, and two cultivated Technosols (Kavumu and Kirengo Technosols) were analyzed for the physicochemical properties. Afterwards, a 28-day incubation (22oC) experiment was conducted followed by measurements of mineral N, soil microbial biomass C, N, P, and fungal ergosterol contents using standard methods. This was followed by a 12-week incubation study of the arable soil and the Kavumu Technosol amended with FYM, Canavalia and Tithonia biomass, and Markhamia leaf litter after which soil microbial properties were measured at 2, 8, and 12 weeks of incubation. Finally, two 4-week incubation experiments each were conducted in soils of the six sites to estimate (i) potential mineralizable N using a soil-sand mixture (1:1) amended with Canavalia and goat manure and (ii) P mineralization mixtures (1:1) of soil and anion exchange resins in bicarbonate form amended with Tithonia biomass and goat manure. In study one, afforestation increased soil organic carbon and total N contents in the pine and eucalyptus Technosols by 34-40% and 28-30%, respectively of that in the native forest soil. Consequently, the microbial biomass and activity followed a similar trend where the cultivated Technosols were inferior to the afforested ones. The microbial indices of the mine soils were constrained by soil acidity, dithionite-extractable Al, and low P availability. In study two, the amendments substantially increased C and N mineralization, microbial properties compared with non-amended soils. Canavalia biomass increased CO2 efflux by 340%, net N mineralization by 30-140%, and microbial biomass C and N by 240-600% and 240-380% (P < 0.01), respectively after four weeks of incubation compared with the non-amended soils. Tithonia biomass increased ergosterol content by roughly 240%. The Kavumu Technosol showed a high potential for quick restoration of its soil quality due to its major responses to the measured biological parameters. In study three, Canavalia biomass gave the highest mineralizable N (130 µg g-1 soil, P < 0.01) in the Kavumu Technosol and the lowest in the native forest soil (-20 µg g-1 soil). Conversely, the mineralizable N of goat manure was negative in all soils ranging from -2.5 µg N g-1 to -7.7 µg N g-1 soil except the native forest soil. However, the immobilization of goat manure N in the “cultivated soils” was 30-70% lower than in the “forest soils” signifying an imminent recovery of the amended soils from N immobilization. The mineralization of goat manure P was three-fold that of Tithonia, constituting 61-71% of total P applied. Phosphorus mineralization slightly decreased after four weeks of incubation due to sulfate competition as reflected in a negative correlation, which was steeper in the Tithonia treatment. In conclusion, each amendment used in this research played a unique role in C, N, and P mineralization and contributed substantially to microbial properties in the tantalite mine soils. Interestingly, the “N immobilizers” exhibited potentials for P release and soil organic carbon storage. Consequently, the combined use of the amendments in specific ratios, or co-composting prior to application is recommended to optimize nutrient release, microbial biomass dynamics and soil organic matter accrual. Transport of organic inputs seems more feasible for smallholder farmers who typically manage small field sizes. To reduce acidity in the soils, liming with wood ash was recommended to also improve P availability and enhance soil biological quality, even if it may only be possible on small areas. Further, afforestation with mixed-species of fast-growing eucalyptus and legume or indigenous tree species are suggested to restore tantalite mine wastelands. It is emphasized most of this research was conducted under controlled laboratory conditions, which exclude interaction with environmental variables. Also fine fractions of the amendments were used compared with the usual practice of applying a mixture of predominantly coarser fractions. Therefore, the biological dynamics reported in the studies here may not entirely reflect those of farmers’ field conditions.

The Architect's Collaborator: Toward Intelligent Tools for Conceptual Design

In early stages of architectural design, as in other design domains, the language used is often very abstract. In architectural design, for example, architects and their clients use experiential terms such as "private" or "open" to describe spaces. If we are to build programs that can help designers during this early-stage design, we must give those programs the capability to deal with concepts on the level of such abstractions. The work reported in this thesis sought to do that, focusing on two key questions: How are abstract terms such as "private" and "open" translated into physical form? How might one build a tool to assist designers with this process? The Architect's Collaborator (TAC) was built to explore these issues. It is a design assistant that supports iterative design refinement, and that represents and reasons about how experiential qualities are manifested in physical form. Given a starting design and a set of design goals, TAC explores the space of possible designs in search of solutions that satisfy the goals. It employs a strategy we've called dependency-directed redesign: it evaluates a design with respect to a set of goals, then uses an explanation of the evaluation to guide proposal and refinement of repair suggestions; it then carries out the repair suggestions to create new designs. A series of experiments was run to study TAC's behavior. Issues of control structure, goal set size, goal order, and modification operator capabilities were explored. In addition, TAC's use as a design assistant was studied in an experiment using a house in the process of being redesigned. TAC's use as an analysis tool was studied in an experiment using Frank Lloyd Wright's Prairie houses.

Plan exportador Madecol Ltda.

En el presente documento se parte de una descripción y análisis de las debilidades y fortalezas de la empresa, así como de su producto más competitivo a nivel nacional proyectado al mercado internacional. Tal análisis consiste en una observación interna de aspectos organizacionales, de producción, financieros, contables, características de los productos, y gestión de mercadeo de la compañía; y en una observación del mercado en el cual se desarrolla, proveedores, clientes, competidores, oportunidades del gobierno, entre otros. Una vez identificadas las debilidades, fortalezas, oportunidades y amenazas, como fruto del análisis preliminar; y conocidos los objetivos de la empresa, se plantean propuestas de mejoramiento y estrategias nacionales e internacionales, para aprovechar las fortalezas y oportunidades identificadas, así como superar las debilidades y amenazas que enfrenta; con el propósito de cumplir las metas de la compañía.