Sisal chemically modified with lignins: Correlation between fibers and phenolic composites properties

Sisal fibers have been chemically modified by reaction with lignins, extracted from sugarcane bagasse and Pinus-type wood and then hydroxymethylated, to increase adhesion in resol-type phenolic thermoset matrices. Inverse gas chromatography (IGC) results showed that acidic sites predominate for unmodified/modified sisal fibers and for phenolic thermoset, indicating that the phenolic matrix has properties that favor the interaction with sisal fibers. The IGC results also showed that the phenolic thermoset has a dispersive component closer to those of the modified fibers suggesting that thermoset interactions with the less polar modified fibers are favored. Surface SEM images of the modified fibers showed that the fiber bundle deaggregation increased after the treatment, making the interfibrillar structure less dense in comparison with that of unmodified fibers, which increased the contact area and encouraged microbial biodegradation in simulated soil. Water diffusion was observed to be faster for composites reinforced with modified fibers, since the phenolic resin penetrated better into modified fibers, thereby blocking water passage through their channels. Overall, composites` properties showed that modified fibers promote a significant reduction in the hydrophilic character, and consequently of the reinforced composite without a major effect on impact strength and with increased storage modulus. (c) 2008 Elsevier Ltd. All rights reserved.

Pendimethalin determination in natural water, baby food and river sediment samples using electroanalytical methods

This work describes the electroanalytical determination of pendimethalin herbicide levels in natural waters, river sediment and baby food samples, based on the electro-reduction of herbicide on the hanging mercury drop electrode using square wave voltammetry (SWV). A number of experimental and voltammetric conditions were evaluated and the best responses were achieved in Britton-Robinson buffer solutions at pH 8.0, using a frequency of 500 s(-1). a scan increment of 10 mV and a square wave amplitude of 50 mV. Under these conditions, the pendimethalin is reduced in an irreversible process, with two reduction peaks at -0.60 V and -0.71 V. using a Ag/AgCl reference system. Analytical curves were constructed and the detection limit values were calculated to be 7.79 mu g L(-1) and 4.88 mu g L(-1), for peak 1 and peak 2, respectively. The precision and accuracy were determinate as a function of experimental repeatability and reproducibility, which showed standard relative deviation values that were lower than 2% for both voltammetric peaks. The applicability of the proposed methodology was evaluated in natural water, river sediments and baby food samples. The calculated recovery efficiencies demonstrate that the proposed methodology is suitable for determining any contamination by pendimethalin in these samples. Additionally, adsorption isotherms were used to evaluate information about the behavior of pendimethalin in river sediment samples. (C) 2010 Elsevier B.V. All rights reserved.

Determination of amino acids by capillary electrophoresis-electrospray ionization-mass spectrometry: An evaluation of different protein hydrolysis procedures

In this work, a CE equipment, online hyphenated to an IT MS analyzer by a linear sheath liquid interface promoting ESI, was used to develop a method for quantitative determination of amino acids. Under appropriate conditions (BGE composition, 0.8% HCOOH, 20% CH(3)OH; sheath liquid composition, 0.8% HCOOH, 60% methanol; V(ESI), +4.50 W), analytical curves of all amino acids from 3 to 80 mg/L were recorded presenting acceptable linearity (r > 0.99). LODs in the range of 16-172 mu mol/L were obtained. BSA, a model protein, was submitted to different hydrolysis procedures (classical acid and basic, and catalyzed by the H(+) form of a cation exchanger resin) and its amino acid profiles determined. In general, the resin-mediated hydrolysis yields were overall similar or better than those obtained by classical acid or basic hydrolysis. The resulting experimental-to-theoretical BSA concentration ratios served as correction factors for the quantitation of amino acids in Brazil nut resin generated hydrolysates.

Fast and Simple Nuclear Magnetic Resonance Method To Measure Conjugated Linoleic Acid in Beef

Conjugated linoleic acids (CLAs) are a group of linoleic acid isomers that are naturally found in food products originating from ruminants (meat and dairy). These acids have received special attention in recent years due to their potential human health benefits. Research efforts have been proposed to increase the CLA content in beef to improve public health. However, because there are more than 30 million beef cattle used each year by the American food industry, it will be necessary to ensure their content in a large number of samples. Therefore, it is important to have an inexpensive and rapid analytical method to measure CLA content in food products. Because gas chromatography (GC), a current popular method for measuring CLAs, is slow, this paper describes a nuclear magnetic resonance spectroscopy ((1)H NMR) method that is potentially >10 times faster than the GC method. Analyses show a correlation coefficient of 0.97, indicating the capacity of NMR to quantify the CLA content in beef samples. Furthermore, the method proposed herein is simple and does not require sophisticated sample preparation.

Caracterização química da erva mate (Ilex paraguariensis) : aplicação de diferentes processos de extração e influência das condições de plantio sobre a composição química

O objetivo deste trabalho foi estudar a composição química das folhas de erva-mate, sob diferentes condições agronômicas e técnicas de extração. Os métodos de extração usados foram maceração, ultra-som, extração com líquido pressurizado e extração com fluído supercrítico. Foram investigadas as variáveis que podem influenciar no processo de extração, tais como temperatura, pressão, polaridade do solvente, tempo de extração, massa de amostra, entre outras. A identificação dos compostos foi realizada por cromatografia gasosa acoplada à espectrometria de massas. Todos os métodos de extração utilizados mostraram-se eficientes para a obtenção dos extratos, com as diferenças sendo mais quantitativas do que qualitativas . Entre os métodos de extração que utilizam solventes orgânicos, a extração com líquido pressurizado mostrou-se mais eficiente, produzindo maior rendimento em massa de extrato e maior concentração de alguns dos compostos de interesse, com as vantagens de redução de solvente e tempo de extração. A composição química da erva-mate é influenciada pelas condições agronômicas de plantio, bem como pelas condições de extração de suas folhas. A melhor condição agronômica avaliada, ou seja, aquela que produziu maior quantidade de extrato, foi o cultivo das plantas a pleno sol, adubadas com nitrogênio e com idade de poda de 18 meses. A variável mais importante das técnicas de extração utilizadas foi a polaridade do solvente. Solventes de maior polaridade produziram maior rendimento em extrato. A análise cromatográfica dos extratos obtidos permitiu identificar cerca de 50 compostos qualitativamente e 6 quantitativamente, destacando-se a cafeína, fitol, ácido palmítico, ácido esteárico, esqualeno e vitamina E.

How the full opening of the capital account to highly liquid financial markets led Latin America to two and a half cycles of ‘mania, panic and crash’

Latin America has recently experienced three cycles of capital inflows, the first two ending in major financial crises. The first took place between 1973 and the 1982 ‘debt-crisis’. The second took place between the 1989 ‘Brady bonds’ agreement (and the beginning of the economic reforms and financial liberalisation that followed) and the Argentinian 2001/2002 crisis, and ended up with four major crises (as well as the 1997 one in East Asia) — Mexico (1994), Brazil (1999), and two in Argentina (1995 and 2001/2). Finally, the third inflow-cycle began in 2003 as soon as international financial markets felt reassured by the surprisingly neo-liberal orientation of President Lula’s government; this cycle intensified in 2004 with the beginning of a (purely speculative) commodity price-boom, and actually strengthened after a brief interlude following the 2008 global financial crash — and at the time of writing (mid-2011) this cycle is still unfolding, although already showing considerable signs of distress. The main aim of this paper is to analyse the financial crises resulting from this second cycle (both in LA and in East Asia) from the perspective of Keynesian/ Minskyian/ Kindlebergian financial economics. I will attempt to show that no matter how diversely these newly financially liberalised Developing Countries tried to deal with the absorption problem created by the subsequent surges of inflow (and they did follow different routes), they invariably ended up in a major crisis. As a result (and despite the insistence of mainstream analysis), these financial crises took place mostly due to factors that were intrinsic (or inherent) to the workings of over-liquid and under-regulated financial markets — and as such, they were both fully deserved and fairly predictable. Furthermore, these crises point not just to major market failures, but to a systemic market failure: evidence suggests that these crises were the spontaneous outcome of actions by utility-maximising agents, freely operating in friendly (‘light-touch’) regulated, over-liquid financial markets. That is, these crises are clear examples that financial markets can be driven by buyers who take little notice of underlying values — i.e., by investors who have incentives to interpret information in a biased fashion in a systematic way. Thus, ‘fat tails’ also occurred because under these circumstances there is a high likelihood of self-made disastrous events. In other words, markets are not always right — indeed, in the case of financial markets they can be seriously wrong as a whole. Also, as the recent collapse of ‘MF Global’ indicates, the capacity of ‘utility-maximising’ agents operating in (excessively) ‘friendly-regulated’ and over-liquid financial market to learn from previous mistakes seems rather limited.

How the full opening of the capital account to highly liquid financial markets led Latin America to two and a half cycles of ‘mania, panic and crash’

Latin America has recently experienced three cycles of capital inflows, the first two ending in major financial crises. The first took place between 1973 and the 1982 ‘debt-crisis’. The second took place between the 1989 ‘Brady bonds’ agreement (and the beginning of the economic reforms and financial liberalisation that followed) and the Argentinian 2001/2002 crisis, and ended up with four major crises (as well as the 1997 one in East Asia) — Mexico (1994), Brazil (1999), and two in Argentina (1995 and 2001/2). Finally, the third inflow-cycle began in 2003 as soon as international financial markets felt reassured by the surprisingly neo-liberal orientation of President Lula’s government; this cycle intensified in 2004 with the beginning of a (purely speculative) commodity price-boom, and actually strengthened after a brief interlude following the 2008 global financial crash — and at the time of writing (mid-2011) this cycle is still unfolding, although already showing considerable signs of distress. The main aim of this paper is to analyse the financial crises resulting from this second cycle (both in LA and in East Asia) from the perspective of Keynesian/ Minskyian/ Kindlebergian financial economics. I will attempt to show that no matter how diversely these newly financially liberalised Developing Countries tried to deal with the absorption problem created by the subsequent surges of inflow (and they did follow different routes), they invariably ended up in a major crisis. As a result (and despite the insistence of mainstream analysis), these financial crises took place mostly due to factors that were intrinsic (or inherent) to the workings of over-liquid and under-regulated financial markets — and as such, they were both fully deserved and fairly predictable. Furthermore, these crises point not just to major market failures, but to a systemic market failure: evidence suggests that these crises were the spontaneous outcome of actions by utility-maximising agents, freely operating in friendly (light-touched) regulated, over-liquid financial markets. That is, these crises are clear examples that financial markets can be driven by buyers who take little notice of underlying values — investors have incentives to interpret information in a biased fashion in a systematic way. ‘Fat tails’ also occurred because under these circumstances there is a high likelihood of self-made disastrous events. In other words, markets are not always right — indeed, in the case of financial markets they can be seriously wrong as a whole. Also, as the recent collapse of ‘MF Global’ indicates, the capacity of ‘utility-maximising’ agents operating in unregulated and over-liquid financial market to learn from previous mistakes seems rather limited.

Non-invasive strategy in assessing asthma through biofluids metabolomics exploration: exhaled breath and urine potentialities

Asthma is a significant health issue in the pediatric population with a noteworthy growth over the years. The proposed challenge for this PhD thesis was the development of advanced methodologies to establish metabolomic patterns in urine and exhaled breath associated with asthma whose applicability was subsequently exploited to evaluate the disease state, the therapy adhesion and effect and for diagnostic purposes. The volatile composition of exhaled breath was studied combining headspace solid phase microextraction (HS-SPME) with gas chromatography coupled to mass spectrometry or with comprehensive two-dimensional gas chromatography coupled to mass spectrometry with a high resolution time of flight analyzer (GC×GC–ToFMS). These methodologies allowed the identification of several hundred compounds from different chemical families. Multivariate analysis (MVA) led to the conclusion that the metabolomic profile of asthma individuals is characterized by higher levels of compounds associated with lipid peroxidation, possibly linked to oxidative stress and inflammation (alkanes and aldehydes) known to play an important role in asthma. For future applications in clinical settings a set of nine compounds was defined and the clinical applicability was proven in monitoring the disease status and in the evaluation of the effect and / or adherence to therapy. The global volatile metabolome of urine was also explored using an HSSPME/GC×GC–ToFMS method and c.a. 200 compounds were identified. A targeted analysis was performed, with 78 compounds related with lipid peroxidation and consequently to oxidative stress levels and inflammation. The urinary non-volatile metabolomic pattern of asthma was established using proton nuclear magnetic resonance (1H NMR). This analysis allowed identifying central metabolic pathways such as oxidative stress, amino acid and lipid metabolism, gut microflora alterations, alterations in the tricarboxylic acid (TCA) cycle, histidine metabolism, lactic acidosis, and modification of free tyrosine residues after eosinophil stimulation. The obtained results allowed exploring and demonstrating the potential of analyzing the metabolomic profile of exhaled air and urine in asthma. Besides the successful development of analysis methodologies, it was possible to explore through exhaled air and urine biochemical pathways affected by asthma, observing complementarity between matrices, as well as, verify the clinical applicability.

Characterization of the Interactions between Endocrine Disruptors and Aquatic Humic Substances from Tropical Rivers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of caffeine urine and saliva of horses subjected to urinary acidification

The study of caffeine in racing horses has been of growing concern in veterinary sports medicine since the Association of Racing Commissioners International (ARCI) stated that it has no valid therapeutic use in racehorses. We examined the kinetic alterations in the urinary excretion and salivary secretion of caffeine in seven horses subjected to urinary acidification using ascorbic acid because this procedure can simulate the acidosis that follows anaerobic exercise. They participated in two treatment groups: the control group (SG) received 500 ml of saline and then 2.0 mg kg(-1) caffeine i.v. 30 min later; and the acidified group (AG) was subjected to urinary acidification with ascorbic acid at a dose of 0.5 g kg(-1) i.v. and then 2.0. mg kg(-1) caffeine i.v. 30 min later. Samples were collected 30 min before caffeine administration, immediately before caffeine administration (time zero) and at 0.25, 0.5, 1, 2, 4, 6, 8, 12, 24, 48 and 72 h afterwards. The samples were assayed by gas chromatography. The mean urinary pH for SG was 8.2, but for AG it was as low as 5.9 at 4 h, extending acidosis for up to 8 h. The kinetic curves for the two groups were similar for urinary excretion and salivary secretion. Differences occurred only in peak excretion and peak secretion in SG obtained at 1 h and 30 min, respectively, and in AG at 2 h and 1 h, respectively. This could be explained, in part, to the diuresis in AG compared with SG, resulting in less concentrated urine in the former group. The large difference between the pK(a) of caffeine and the pH of the medium may be responsible for the similar pharmacokinetics observed for the two groups. Copyright (C) 2004 John Wiley Sons, Ltd.

Avaliação de catalisadores a base de carbeto e nitreto de molibdênio na obtenção de lactitol via hidrogenação da lactose

Seeking a greater appreciation of cheese whey was developed to process the hydrogenation of lactose for the production of lactitol, a polyol with high added value, using the catalyst Ni / activated carbon (15% and 20% nickel), the nitride Mo2N, the bimetallic carbide Ni-Mo/ activated carbon and carbide Mo2C. After synthesis, the prepared catalysts were analyzed by MEV, XRD, laser granulometry and B.E.T. The reactor used in catalytic hydrogenation of lactose was the type of bed mud with a pressure (68 atm), temperature (120 oC) and stirring speed (500 rpm) remained constant during the experiments. The system operated in batch mode for the solid and liquid and semi-continuous to gas. Besides the nature of the catalyst, we studied the influence of pH of reaction medium for Mo2C carbide as well as evaluating the character of the protein inhibitor and chloride ions on the activity of catalysts Ni (20%)/Activated Carbon and bimetallic carbide Ni-Mo/Activated Carbon. The decrease in protein levels was performed by coagulation with chitosan and adsorption of chloride ions was performed by ion exchange resins. In the process of protein adsorption and chloride ions, the maximum percentage extracted was about 74% and 79% respectively. The micrographs of the powders of Mo2C and Mo2N presented in the form of homogeneous clusters, whereas for the catalysts supported on activated carbon, microporous structure proved impregnated with small particles indicating the presence of metal. The results showed high conversion of lactose to lactitol 90% for the catalyst Ni (20%)/Activated Carbon at pH 6 and 46% for the carbide Mo2C pH 8 (after addition of NH4OH) using the commercial lactose. Monitoring the evolution of the constituents present in the reaction medium was made by liquid chromatography. A kinetic model of heterogeneous Langmuir Hinshelwood type was developed which showed that the estimated constants based catalysts promoted carbide and nitride with a certain speed the adsorption, desorption and production of lactitol

Volatile compounds from organic and conventional passion fruit (Passiflora edulis F. Flavicarpa) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification and migration of degradation compounds from irradiation of multilayer polyamide 6 films for meat foodstuffs and cheese

The aim of this work was to identify the degradation compounds produced during irradiation of multilayer polyamide 6 (PA-6) films and to study their migration into water and 95% ethanol food simulant. After irradiation of multilayer PA-6 films at 3, 7 and 12 kGy, degradation compounds were extracted using solid-phase microextraction, for which the time and temperature of extraction and stirring were optimized, and identified by gas chromatography-mass spectrometry. Caprolactam, 2-cyclopentylcyclopentanone and aldehydes, among other compounds, were identified in the headspace of the films. Polydimethylsiloxane was considered the best fiber for extraction. The optimum conditions of time, temperature and stirring to extract the compounds were 20 min, 80 degrees C and 225 rpm. For validation purposes, the compounds were quantified in water and 95% ethanol and the results showed high sensitivity, good precision and accuracy. Migration of compounds from irradiated and non-irradiated multilayer PA-6 films into water and 95% ethanol food simulants was carried out at 40 degrees C for 10 days. The method was efficient for the quantification of decaldehyde, 2-cyclopentylcyclopentanone and caprolactam that migrated from multilayer PA-6 films into food simulants.

Chemical Profile and Biological Potential of Non-Polar Fractions from Centroceras clavulatum (C. Agardh) Montagne (Ceramiales, Rhodophyta)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rapid determination of desorption efficiency, and analysis of solvent mixtures for occupational exposure studies

An analytical procedure has been developed for simultaneous determination of solvent mixture vapors to enable evaluation of occupational exposure. To determine the desorption efficiency the volatile components of the solvent mixtures were generated from a glass tube filled with glass wool. This device is easy to prepare and use. These vapors were then collected in activated charcoal tubes and analyzed by capillary gas chromatography. The method was tested with a mixture of 22 solvents, including aliphatic and aromatic hydrocarbons, alcohols, ethers, esters, and ketones, oil at low concentrations. All the components were defected. When a 99: 1 mixture of carbon disulfide-dimethylformamide was used for desorption the efficiency was > 75% for most of the solvents.