Influência da turbidez da água do rio Tietê na ocorrência de plantas aquáticas

As plantas aquáticas são estudadas como um efeito do desequilíbrio causado pela poluição e/ou alagamento dos rios. A quantidade excessiva de plantas, conseqüente desse desequilíbrio, dificulta a navegação e a produção de energia elétrica. O objetivo deste trabalho foi identificar as principais plantas aquáticas do rio Tietê e relacioná-las com a turbidez da água dos diferentes reservatórios. Foram avaliados todos os focos de vegetação aquática emersa, flutuante e submersa, presentes em cada reservatório, em toda a sua extensão, sendo consideradas como importantes as espécies que apresentaram o caráter dominante. Foi observado que os represamentos apresentam problema de plantas aquáticas e a qualidade da infestação varia entre os reservatórios. Foram consideradas como dominantes as seguintes espécies: Brachiaria mutica, Brachiaria subquadripara, Eichhornia crassipes, Egeria densa, Egeria najas, Enidra sessilis e Typha angustifolia. Observou-se que houve uma tendência de maior ocorrência de plantas flutuantes e emersas (marginais) nos reservatórios com maior turbidez e de plantas submersas naqueles com menor turbidez. Para as duas braquiárias, observou-se que a freqüência das espécies aumentou com o aumento da turbidez até o limite de 34,93 NTU. O aguapé ocorreu com altos índices de freqüência (acima de 50%) em todos os reservatórios do rio Tietê, independentemente das características da água. em se tratando das egérias, a freqüência das espécies aumentou gradativamente com a redução da turbidez e a taboa não apresentou uma relação com o índice estudado. A espécie E. sessilis se mostrou bastante dependente da qualidade da água, tendo sua freqüência aumentada com o aumento da turbidez.

Avaliação da influência do vento na circulação de uma lagoa de estabilização

Este artigo avaliou a influência do vento em diferentes profundidades na circulação de massa líquida da lagoa facultativa da estação de tratamento de esgotos do município de Álvares Florence, em São Paulo, Brasil, por meio de flutuadores com diferentes dimensões (15, 25 e 35 cm de comprimento). Por meio de um método simples, prático e de baixo custo, foi possível verificar o sentido de circulação da lagoa, o qual, por sua vez, está relacionado com a direção dos ventos.

Influência espaço-temporal e fisiológica na absorção de nutrientes e elementos tóxicos por Eichhornia crassipes visando o uso adequado da sua biomassa: o caso do Rio Apodi/Mossoró - RN

This study aims to determine the amount of nutrients and toxic elements in aquatic macrophytes of species Eichhornia crassipes present in River Apodi/Mossoró - RN and check some of the possibilities of using the biomass produced, based on the influence of space - temporal and physiological absorption of nutrients by plants. For this, was determined: Leaf area, Leaf wet mass, Leaf dry mass, Real humidity, Apparent humidity, Ash, Total nitrogen, Crude protein, Calcium, Magnesium, Potassium, Total phosphorus, Sodium, Iron, Copper, Manganese, Zinc, Nickel, Cobalt, Aluminum, Cadmium, Lead and Total chromium at different times, 2 sampling points and 2 parts of plants (leaves and roots). The results show that the levels of nutrients, protein and toxic elements present in plant tissue of Eichhornia crassipes are influenced by spatial, temporal and physiological variability. In general, because the maximum values in the dry matter for total nitrogen (4.4088 g/100g), crude protein (27.5549 g/100g), total phosphorus (0.642 g/100 g), calcium (1.444 g/100g), magnesium (0.732 g/100 g), potassium (7.51 g/100 g), copper (4.4279 mg/100g), manganese (322.668 mg/100g), sodium (1.39 g/100g), iron (194.169 mg/100g) and zinc (3.5836 mg/100g), there was the possibility of using biomass of Eichhornia crassipes for various purposes such as in food animal, products production for human consumption, organic fertilizers, fabrication of brick low cost, and crafts. For all these applications requires a control of the levels of substances in plant tissue. Based on the levels of nutrients and crude protein, the younger plants (0 Month) would be best to have their biomass used. Moreover, one factor that contributes to the use of larger plants (6 Months), the levels of toxic elements which have significantly small or below the detection limit. Therefore, further studies quantifying the biomass produced/m2 at 0 and 6 months are needed for a more correct choice for the best time of harvest

Influência do cálcio na calda de pulverização sobre a eficácia do carfentrazone-ethyl no controle de Euphorbia heterophylla

Alguns herbicidas podem ter sua eficácia de controle das plantas daninhas diminuída quando o cálcio encontra-se presente na calda de pulverização. Sendo assim, o presente trabalho foi desenvolvido com o objetivo de estudar a influência do cálcio na eficácia do herbicida carfentrazone-ethyl aplicado em pós-emergência sobre plantas adultas de Euphorbia heterophylla. Foram conduzidos dois experimentos com as concentrações de cálcio variando de 30 a 240 ppm e de 0 a 1.000 ppm respectivamente em cada experimento. O delineamento experimental utilizado foi o de blocos ao acaso, com quatro repetições. Observou-se que a eficácia do herbicida carfentrazone-ethyl não é afetada pela presença de cálcio em concentrações na calda de pulverização de até 1.000 ppm e que, na dose de 30 g i.a.ha-1 o herbicida é eficiente no controle de plantas adultas de E. heterophylla.

Avaliação da influência da matéria orgânica, na determinação quantitativa de metais em amostras de sedimento, por espectrometria de absorção atômica e análise de metais traços por fluorescência de raios-X

The proposal of this work is to evaluate the influence of the organic matter on the results of the analyses of the metals (Zn, Pb, Al, Cu, Cr, Fe, Cd e Ni) for Atomic Absorption Spectrometry (AAS), so much in the extraction stage as in the reading using for that the chemometrics. They were used for this study sample of bottom sediment collected in river Jundiaí in the vicinity of the city of Macaíba-RN, commercial humus and water of the station of treatment of sewer of UFRN. Through the analyses accomplished by EAA it was verified that the interference of the organic matter happens in the extraction stage and not in the reading. With relationship to the technique of X Ray Fluorescence Spectrometry (XRFS), the present work has as intended to evaluate the viability of this technique for quantitative analysis of trace metals (Cr, Ni, Cu, Zn, Rb, Sr and Pb) in having leached obtained starting from the extraction with acqua regia for an aqueous solution. The used samples constitute the fine fraction (<0.063 mm) of sediments of swamp of the river Jundiaí. The preparation of tablets pressed starting from the dry residue of those leached it allowed your analysis in the solid form. This preliminary study shows that, in the case of the digestion chemistry partially of the fine fractions of bottom sediments used for environmental studies, the technique of applied EFRX to the analysis of dry residues starting from having leached with acqua regia, compared her it analyzes of the leached with ICP-OES, it presents relative mistakes for Cu, Pb, Sr and Zn below 10%

Influência de atividades antrópicas sobre a salinização da água em área de dunas no Município de Guamaré RN

The municipality of Guamaré is located on the north coast of RN, Salineira zone, with a land area of 259 km2 and a population of approximately 12,500 inhabitants (IBGE, 2010). Presents strong morphological instability caused mainly by the influence of human activities in the region. The present study aims to assess the existing levels of salts in the springs of the region, by evaluating the electrical conductivity, pH, salinity, chlorides, hardness, calcium, magnesium and heavy metals in the water. The collection and analysis methods adopted in the survey are based on APHA (2005). The electrical conductivity, salinity and chloride behaved similarly throughout the study. Some points suffered the direct effect of the salt ponds and others. Given the existence of a drainage ditch between the saline and monitored region, there was little change in the environment, including the native vegetation. The opposite situation occurred in farms where the region is fully committed local vegetation and water holes and wells used in the past for domestic use are practically disabled (high salt content). In Rio Miassaba formation of an estuary is reversed, with the farther out from the sea showing higher salt concentracions, which may be associated with the discharge of organic matter and natural evaporation rate. In periods of no rainfall had a few points higher than the levels of salts found in seawater and may be associated with high evaporation in the region. Detected a positive factor is the high resilience and reducing salt, after periods of rainfall incidence

Influência da acrilamida e da poliacrilamida em sistema microemulsionado visando aplicação na recuperação avançada de petróleo

This work aims to study the influence of two additives, the monomer, acrylamide and its polymer, polyacrylamide, solubilized in microemulsion systems and applied on enhanced oil recovery. By the microemulsion system obtained, it was chosen points into the phase diagram, presenting these compositions: 25%, 30%, 35% C/T; 2% Fo (fixed for all points) e 73%, 68% e 63% Fa, respectively. However, the monomer and the polymer were solubilized in these microemulsion points with 0.1%; 0.5%; 1% e 2% of concentration, ordering to check the concentration influence at the physicochemical properties (surface tension and rheology) of the microemulsion. Through the salinity study, was possible to observe that the concentrations of 1% and 2% of polymer made the solution became blurred, accordingly, the study of surface tension and rheology only was made for the concentrations of 0.1% e 0.5% of monomer and polymer, respectively. By the surface tension study it was observed that how the concentration of active matter (C/T) was increasing the surface tension was amending for each system, with or without additives. In the rheology study, as it increases the concentration of active matter increases both the viscosity of the microemulsion system (SME) with no additive, as the SME with polymer (AD2). After the entire study, it was chosen the lower point of active matter (25% C/T; 2% Fo e 73% Fa), plus additives in concentrations of 0.1% and 0.5% to be used on enhanced oil recovery. Assays were made on sandstone from Botucatu Formation, where after the tests, it was concluded that among the studied points, the point who showed the best efficiency of advanced shift was the microemulsion system + 0.5% AD2, with a recovery of 28% of oil in place and a total of 96,49%, while the other solution with 0.5% of polymer presented the worst result, with 14.1% of oil in place and 67,39% of efficiency of total displacement

Influência da época de semeadura no comportamento de cultivares de arroz irrigado por aspersão em Selvíria, MS

Este trabalho teve por objetivo avaliar os efeitos da época da semeadura no comportamento de diferentes cultivares de arroz (Oryza sativa L.) de sequeiro (IAC 201, Carajás, Guarani, IAC 202, CNA 7800, CNA 7801, Caiapó, Rio Paranaíba e Araguaia) irrigados por aspersão, quanto à produção e qualidade dos grãos. As sementes foram semeadas no início da segunda quinzena dos meses de setembro, outubro, novembro, dezembro, janeiro e fevereiro. Os experimentos foram instalados no Município de Selvíria, MS, durante os anos agrícolas 1995/96 e 1996/97. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. O controle da irrigação foi realizado por meio de tensiômetros, e a suplementação hídrica foi realizada quando o potencial matricial atingiu -0,033 MPa, durante a fase reprodutiva e -0,058 MPa, nas demais fases. de acordo com os resultados obtidos, pode-se concluir que as cultivares CNA 7801, Carajás, IAC 201, CNA 7800 e IAC 202 apresentaram comportamento superior; a semeadura realizada em novembro propiciou produtividade mais elevada; semeaduras antecipadas (setembro-outubro) ou retardada (fevereiro) resultaram em menores índices de acamamento; as cultivares IAC 202, CNA 7800 e CNA 7801 apresentaram ausência ou baixo índice de acamamento, nas diferentes épocas de semeadura e, a semeadura retardada (fevereiro) proporcionou a obtenção de maior rendimento de inteiros.

Influência da densidade de carga e da massa molar da poliacrilamida na reologia de sistemas microemulsionados

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

Influência de fontes e modos de aplicação de nitrogênio nos componentes da produção e produtividade do milho irrigado no cerrado

O objetivo do trabalho foi comparar os efeitos de fontes nitrogenadas: sulfonitrato de amônio com inibidor de nitrificação, sulfato de amônio e uréia, aplicadas na semeadura e/ou em cobertura, sobre teores de N foliar e clorofila, componentes da produção e produtividade do milho no verão, na região de cerrado sob irrigação. O trabalho foi desenvolvido em Latossolo Vermelho Distroférrico, nos anos agrícolas de 2006/2007 e 2007/2008. O delineamento experimental utilizado foi em blocos casualizados com quatro repetições, em esquema fatorial 3x5, sendo: três fontes de nitrogênio aplicadas na semeadura e/ou em cobertura, no estádio de 8 folhas completamente desdobradas, em 5 modos de aplicação (0 + 120; 30 + 90; 60 + 60; 90 + 30 e 120 + 0 kg ha-1 de N). O sulfonitrato de amônio + inibidor de nitrificação difere em relação ao sulfato de amônio quantos aos componentes da produção do milho cultivado no verão, independentemente da época de aplicação. A aplicação de 120 kg ha-1 de nitrogênio usando a uréia em aplicação única no estádio de oito folhas na cultura do milho e em períodos com alta precipitação pluvial afeta negativamente os teores foliares de N no milho e resulta em menor produtividade de grãos em relação à aplicação da mesma dose na semeadura.

Estudo da influência do biodiesel de mamona como aditivo antioxidante para o biodiesel de girassol e soja

Biodiesel is a fuel made up by mono-alkyl-esters of long chain fatty acids, derived from vegetable oils or animal fat. This fuel can be used in compression ignition engines for automotive propulsion or energy generation, as a partial or total substitute of fossil diesel fuel. Biodiesel can be processed from different mechanisms. Transesterification is the most common process for obtaining biodiesel, in which an ester compound reacts with an alcohol to form a new ester and a new alcohol. These reactions are normally catalyzed by the addition of an acid or a base. Initially sunflower, castor and soybean oil physicochemical properties are determined according to standard test methods, to evaluate if they had favorable conditions for use as raw material in the transesterification reaction. Sunflower, castor and soybean biodiesel were obtained by the methylic transesterification route in the presence of KOH and presented a yield above 93% m/m. The sunflower/castor and soybean/castor blends were studied with the aim of evaluating the thermal and oxidative stability of the biofuels. The biodiesel and blends were characterized by acid value, iodine value, density, flash point, sulfur content, and content of methanol and esters by gas chromatography (GC). Also studies of thermal and oxidative stability by Thermogravimetry (TG), Differential Scanning Calorimetry High Pressure (P-DSC) and dynamic method exothermic and Rancimat were carried out. Biodiesel sunflower and soybean are presented according to the specifications established by the Resolution ANP no 7/2008. Biodiesel from castor oil, as expected, showed a high density and kinematic viscosity. For the blends studied, the concentration of castor biodiesel to increased the density, kinematic viscosity and flash point. The addition of castor biodiesel as antioxidant in sunflower and soybean biodiesels is promising, for a significant improvement in resistance to autoxidation and therefore on its oxidative stability. The blends showed that compliance with the requirements of the ANP have been included in the range of 20-40%. This form may be used as a partial substitute of fossil diesel

Sucessão de culturas e sua influência nas propriedades físicas do solo e na produtividade do feijoeiro de inverno irrigado, em diferentes sistemas de manejo do solo

As propriedades físicas do solo podem ser alteradas mediante diferentes sistemas de manejo do solo e cultivo adotados. Assim, o presente trabalho foi desenvolvido em 2003/04, na região de Cerrado do Mato Grosso Sul, em Selvíria (MS), objetivando-se avaliar a produção de massa seca, porcentagem de recobrimento do solo e a influência de sucessões de culturas e sistemas de manejo nas propriedades físicas de um Latossolo Vermelho e na produtividade do feijoeiro de inverno irrigado. O delineamento experimental utilizado foi em blocos casualisados, em esquema de parcelas subdivididas, com quatro blocos. As parcelas foram constituídas pelos sistemas de manejo do solo - grade pesada, escarificador e plantio direto, e as subparcelas por seis sucessões implantadas no verão - milho, milho + mucuna-preta, milho + braquiária, soja, arroz e Crotalaria juncea. A cultura do feijão foi semeada após a colheita/manejo das plantas cultivadas no verão. C. juncea, milho + mucuna-preta, milho + braquiária e milho, independentemente do manejo do solo utilizado, constituem adequadas opções de sucessão de culturas, mediante alta produção de massa seca e recobrimento do solo. No plantio direto, comparado aos demais sistemas de manejo estudados, é causada compactação na camada superficial, mediante redução da macroporosidade. Com exceção da macroporosidade na camada mais superficial (0-0,1 m), as propriedades umidade, macroporosidade, microporosidade e porosidade total do solo não são influenciadas pelos sistemas de manejo do solo. Apesar de efeitos diferentes em alguns componentes de produção do feijoeiro devido a determinado manejo do solo ou sucessão de culturas, isso não repercute na produtividade do feijoeiro de inverno irrigado.

Análise comparativa na influência da técnica de moldagem funcional em arcos parcialmente edêntulos sobre os pontos de contato oclusais, a integridade da fibromucosa e a extensão da base da prótese

There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Influência das condições de saúde bucal no desempenho das atividades diárias de adolescentes escolares

Instruments are used in odontology to measure the Quality of Life Related to Oral Health (OHRQoL) to scale how the oral condition interferes with functional areas, of the people s psychological and social life. This cross-sectional study, held in Natal/RN, with 215 students from the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) has investigated the association between the performance of daily activities and oral health status of school adolescents from 15 to 19 years of age, through the normative index DMFT (permanent teeth decayed, missing and filled), CPI (Community Periodontal Index) and DAI (dental Aesthetic Index) and subjective questionnaire assessment of quality of life related oral health OIDP index (oral impacts on daily performance). It was also carried out the socioeconomic characteristics of students through IFRN own data. Concerning the analysis of data was performed a descriptive analysis of the variables by their absolute and relative frequencies and measures of central tendency. The chi-square test was used to assess the association between the dependent variable and the independent categorical variables and the Student t test for quantitative. It was also conducted a further multiple analysis out using Poisson regression with robust variance between the outcome "presence of impact" and the independent variables that showed p <0.20. It was used for all the statistical tests a significance level of 5%. Among the adolescents surveyed, 51.16% reported that at least one activity assessed by OIDP had hampered its implementation due to some dental problem. The difficulties were more pronounced in the activities of eating (31.6%), oral hygiene (25.6%) and smile (25.1%).The tooth position, followed by toothache, were the causes of the impacts reported by most teenagers. There was a significant association between the presence and impact of the presence of one or more decayed teeth (p = 0.012), the presence of gum bleeding (p = 0.012) and for orthodontic treatment (p = 0.003), independently of other variables. There was no significant association between oral health status and socioeconomic and demographic characteristics of the adolescents. The survey results showed that there is an association between oral health status of the population studied and reports of difficulties in carrying out daily activities evaluated. The worse the oral health status, the greater the impact of this condition on the adolescents quality of life