Paléoécologie d’une tourbière à pergélisol en dégradation du sud des Territoires du Nord-Ouest : implications pour le cycle du carbone

Les tourbières ont contribué à refroidir le climat terrestre pendant l’Holocène en accumulant un réservoir de carbone important. Dans la forêt boréale canadienne, les sols gelés en permanence (pergélisols) sont répandus et ceux-ci sont principalement localisés dans les tourbières où ils forment des plateaux surélevés. Le dégel du pergélisol, causé entre autres par le réchauffement atmosphérique ou d’autres perturbations, provoque l’effondrement des plateaux et la saturation en eau du sol ce qui modifie entre autres le couvert végétal et le cycle du carbone. Les modélisations suggèrent que les latitudes nordiques seront les plus affectées par le réchauffement climatique alors qu’on y observe déjà un recul du couvert du pergélisol. Il est primordial de comprendre comment le dégel du pergélisol affecte la fonction de puits de carbone des tourbières puisque des rétroactions sur le climat sont possibles si une grande quantité de gaz à effet de serre est émise ou séquestrée. J’utilise une chronoséquence représentant le temps depuis le dégel d’un plateau de pergélisol des Territoires du Nord-Ouest pour comprendre les facteurs influençant l’aggradation et la dégradation du pergélisol dans les tourbières et évaluer l’effet du dégel sur l’accumulation de carbone et la préservation du carbone déjà accumulé. Les taux d’accumulation de carbone associés à la présence de pergélisol dans le passé et au présent sont lents, et la tourbe est moins décomposée dans les secteurs ayant été affectés plus longtemps par le pergélisol. En somme, le pergélisol réduit l’accumulation de carbone en surface mais permet une meilleure préservation du carbone déjà accumulé.

Motivating the use of public transit through a mobile glanceable display

With increasing concerns about the impact of global warming on human life, policy makers around the world and researchers have sought for technological solutions that have the potential to attenuate this process. This thesis describes the design and evaluation of an information appliance that aims to increase the use of public transportation. We developed a mobile glanceable display that, being aware of the user’s transportation routines, provides awareness cues about bus arrival time, grounded upon the vision of Ambient Intelligence. We present the design process we followed, from ideation to building a prototype and conducting a field study, and conclude with a set of guidelines for the design of relevant personal information systems. More specifically we seek to test the following hypotheses: 1) That the tangible prototype that provides ambient cues will be used more frequently than a similar purpose mobile app, 2) That the tangible prototype will reduce the waiting time at the bus stop, 3) That the tangible prototype will result to reduced anxiety on passengers, 4) That the tangible prototype will result to an increase in the perceived reliability of the transit service, 5) That the tangible prototype will enhance users’ efficiency in reading the bus schedules and 6) That the tangible prototype will make individuals more likely to use public transit. In a field study, we compare the tangible prototype against the mobile app and a control condition where participants were given no external support in obtaining bus arrival information, other than their existing routines. Using qualitative and quantitative data, we test the aforementioned hypotheses and explore users’ reactions to the prototype we developed.

Gräs från våtmark som additiv i bränslepellets : Effekter på pelletskvalitet och energiförbrukning

Because of global warming the energy production development has progressed towards more renewable energy sources. Biomass has great potential in this matter and pellet is already a big market that has increased seven times the past decade. A periodically strained woodchip resource market and statements of short supply in the future has got actors exploring opportunities with other commodities. Grasses such as Canary grass has shown great potential in this matter and in this study a wetland grass is tested as an additive, 0,5, 1,0, 1,5, and 1,9%, with spruce woodchips. The test production series was performed at a production unit located at the department of environmental and energy system at Karlstad University, Karlstad. Quality was controlled accordingly to the European standard and parameters such as energy consumption, moisture content, mechanical durability and bulk density was tested. For comparison, a sample with only spruce wood chips was produced, and a sample containing 1% of a commonly used additive, potato starch. The results showed that a decrease in energy consumption with 14% when 2% wetland grass was added, part of the decline may be due to the increased production flow compared with the reference sample. The positive effects on decrease in energy consumption, that 1% potato starch results in, is equal to reults from 1% wetlandgrass. This indicates lubricating properties in wetlandgrass. This is attributed to that herbaceous plants have a high content of extracts such as waxes and that they cause less friction in the press. Tests also showed that pellet with wetland grass did not qualify the European standard in terms of mechanical durability. Extracts can form a weak boundary layer in the pellet and cause this. A possible trend shows a better mechanical durability with more grass in pellets. The presence of different size of particles can be a reason. Moisture content qualifies according to the European standard but is below optimum 8%. This despite to relatively high moisture content in the mixer. Higher moisture content in the press would certainly result in a generally higher quality. Suggestions for future studies are to produce pellets with greater distribution on the wetland grass added, to easier interpret a connection. Also examine the extracts behavior with different moisture content. For a sustainable development accordingly renewable energy it is important to ensure the future commodity market for pellets. Further studies should be performed to help the development of alternative raw materials in conjunction with pellet production.

Application of multi-criteria decision making methods to compression ignition engine efficiency and gaseous, particulate and greenhouse gas emissions

Compression ignition (CI) engine design is subject to many constraints which presents a multi-criteria optimisation problem that the engine researcher must solve. In particular, the modern CI engine must not only be efficient, but must also deliver low gaseous, particulate and life cycle greenhouse gas emissions so that its impact on urban air quality, human health, and global warming are minimised. Consequently, this study undertakes a multi-criteria analysis which seeks to identify alternative fuels, injection technologies and combustion strategies that could potentially satisfy these CI engine design constraints. Three datasets are analysed with the Preference Ranking Organization Method for Enrichment Evaluations and Geometrical Analysis for Interactive Aid (PROMETHEE-GAIA) algorithm to explore the impact of 1): an ethanol fumigation system, 2): alternative fuels (20 % biodiesel and synthetic diesel) and alternative injection technologies (mechanical direct injection and common rail injection), and 3): various biodiesel fuels made from 3 feedstocks (i.e. soy, tallow, and canola) tested at several blend percentages (20-100 %) on the resulting emissions and efficiency profile of the various test engines. The results show that moderate ethanol substitutions (~20 % by energy) at moderate load, high percentage soy blends (60-100 %), and alternative fuels (biodiesel and synthetic diesel) provide an efficiency and emissions profile that yields the most “preferred” solutions to this multi-criteria engine design problem. Further research is, however, required to reduce Reactive Oxygen Species (ROS) emissions with alternative fuels, and to deliver technologies that do not significantly reduce the median diameter of particle emissions.

Sand temperatures for nesting sea turtles in the Caribbean: Implications for hatchling sex ratios in the face of climate change

A 200-year time series of incubation temperatures and primary sex ratios for green (Chelonia mydas), hawksbill (Eretmochelys imbricata) and leatherback (Dermochelys coriacea) sea turtles nesting in St. Eustatius (North East Caribbean) was created by combining sand temperature measurements with historical and current environmental data and climate projections. Rainfall and spring tides were important because they cooled the sand and lowered incubation temperatures. Mean annual sand temperatures are currently 31.0. °C (SD. =. 1.6) at the nesting beach but show seasonality, with lower temperatures (29.1-29.6. °C) during January-March and warmer temperatures (31.9-33.3. °C) in June-August. Results suggest that all three species have had female-biased hatchling production for the past decades with less than 15.5%, 36.0%, and 23.7% males produced every year for greens, hawksbills and leatherbacks respectively since the late nineteenth century. Global warming will exacerbate this female-skew. For example, projections indicate that only 2.4% of green turtle hatchlings will be males by 2030, 1.0% by 2060, and 0.4% by 2090. On the other hand, future changes to nesting phenology have the potential to mitigate the extent of feminisation. In the absence of such phenological changes, management strategies to artificially lower incubation temperatures by shading nests or relocating nest clutches to deeper depths may be the only way to prevent the localised extinction of these turtle populations.

Palaeobiogeographic distribution patterns and processes of neochonetes and fusichonetes (brachiopoda) in the late palaeozoic and earliest mesozoic

The global palaeobiogeographic distributions of two resembling genera, Neochonetes and Fusichonetes (Brachiopoda), from the Carboniferous to Griesbachian are analysed. This analysis provides insight into the biotic response of two related genera to changing palaeoclimate, regional tectonics, and environmental crises. Neochonetes originated in the equatorial area in the Mississippian, and it mostly retained this position during the peak of the glaciation in the Carboniferous–Permian ice age (namely in the Pennsylvanian). Neochonetes then dispersed globally during the Cisuralian when the climate became warmer and the ice sheet started to retreat. In the Guadalupian and Lopingian, following the closure of the Ural seaway at the end of the Cisuralian and the regression at the end-Guadalupian, Neochonetes almost disappeared in the western part of Gondwana. Subsequently during the Lopingian the genus retracted to the middle- and low-latitude Palaeo-Tethys and Tethys. In comparison, Fusichonetes originated in the equatorial area in the late Guadalupian and was still present in that area in the Lopingian. Both genera occurred only in South China in the Griesbachian. It is inferred that this could be related, not only to the deteriorated palaeoenvironmental conditions (e.g., anoxia, global warming) leading up to the extinction of most of the Neochonetes and Fusichonetes species in other areas, but also to the better physiological adaptation of the smaller shells of Neochonetes and Fusichonetes species in South China.

Développement des bétons autoplaçants à faible teneur en poudre, Éco-BAP: formulation et performance

Abstract : Although concrete is a relatively green material, the astronomical volume of concrete produced worldwide annually places the concrete construction sector among the noticeable contributors to the global warming. The most polluting constituent of concrete is cement due to its production process which releases, on average, 0.83 kg CO[subscript 2] per kg of cement. Self-consolidating concrete (SCC), a type of concrete that can fill in the formwork without external vibration, is a technology that can offer a solution to the sustainability issues of concrete industry. However, all of the workability requirements of SCC originate from a higher powder content (compared to conventional concrete) which can increase both the cost of construction and the environmental impact of SCC for some applications. Ecological SCC, Eco-SCC, is a recent development combing the advantages of SCC and a significantly lower powder content. The maximum powder content of this concrete, intended for building and commercial construction, is limited to 315 kg/m[superscript 3]. Nevertheless, designing Eco-SCC can be challenging since a delicate balance between different ingredients of this concrete is required to secure a satisfactory mixture. In this Ph.D. program, the principal objective is to develop a systematic design method to produce Eco-SCC. Since the particle lattice effect (PLE) is a key parameter to design stable Eco-SCC mixtures and is not well understood, in the first phase of this research, this phenomenon is studied. The focus in this phase is on the effect of particle-size distribution (PSD) on the PLE and stability of model mixtures as well as SCC. In the second phase, the design protocol is developed, and the properties of obtained Eco-SCC mixtures in both fresh and hardened states are evaluated. Since the assessment of robustness is crucial for successful production of concrete on large-scale, in the final phase of this work, the robustness of one the best-performing mixtures of Phase II is examined. It was found that increasing the volume fraction of a stable size-class results in an increase in the stability of that class, which in turn contributes to a higher PLE of the granular skeleton and better stability of the system. It was shown that a continuous PSD in which the volume fraction of each size class is larger than the consecutive coarser class can increase the PLE. Using such PSD was shown to allow for a substantial increase in the fluidity of SCC mixture without compromising the segregation resistance. An index to predict the segregation potential of a suspension of particles in a yield stress fluid was proposed. In the second phase of the dissertation, a five-step design method for Eco-SCC was established. The design protocol started with the determination of powder and water contents followed by the optimization of sand and coarse aggregate volume fractions according to an ideal PSD model (Funk and Dinger). The powder composition was optimized in the third step to minimize the water demand while securing adequate performance in the hardened state. The superplasticizer (SP) content of the mixtures was determined in next step. The last step dealt with the assessment of the global warming potential of the formulated Eco-SCC mixtures. The optimized Eco-SCC mixtures met all the requirements of self-consolidation in the fresh state. The 28-day compressive strength of such mixtures complied with the target range of 25 to 35 MPa. In addition, the mixtures showed sufficient performance in terms of drying shrinkage, electrical resistivity, and frost durability for the intended applications. The eco-performance of the developed mixtures was satisfactory as well. It was demonstrated in the last phase that the robustness of Eco-SCC is generally good with regards to water content variations and coarse aggregate characteristics alterations. Special attention must be paid to the dosage of SP during batching.

Motivating the use of public transit through a mobile glanceable display

With increasing concerns about the impact of global warming on human life, policy makers around the world and researchers have sought for technological solutions that have the potential to attenuate this process. This thesis describes the design and evaluation of an information appliance that aims to increase the use of public transportation. We developed a mobile glanceable display that, being aware of the user’s transportation routines, provides awareness cues about bus arrival time, grounded upon the vision of Ambient Intelligence. We present the design process we followed, from ideation to building a prototype and conducting a field study, and conclude with a set of guidelines for the design of relevant personal information systems. More specifically we seek to test the following hypotheses: 1) That the tangible prototype that provides ambient cues will be used more frequently than a similar purpose mobile app, 2) That the tangible prototype will reduce the waiting time at the bus stop, 3) That the tangible prototype will result to reduced anxiety on passengers, 4) That the tangible prototype will result to an increase in the perceived reliability of the transit service, 5) That the tangible prototype will enhance users’ efficiency in reading the bus schedules and 6) That the tangible prototype will make individuals more likely to use public transit. In a field study, we compare the tangible prototype against the mobile app and a control condition where participants were given no external support in obtaining bus arrival information, other than their existing routines. Using qualitative and quantitative data, we test the aforementioned hypotheses and explore users’ reactions to the prototype we developed.

Small states and the promotion of their foreign policy agenda in the international scenario: Trinidad and Tobago and the Kyoto Protocol

Este estudio de caso busca identificar los elementos del portafolio de política exterior de Trinidad y Tobago que le permitieron promover exitosamente sus intereses en el Protocolo de Kioto. Al hacer esto, este texto analizará las limitaciones de Trinidad y Tobago en términos de vulnerabilidades de localización, burocracia y recursos. Posteriormente, una revisión del portafolio de política exterior de este Estado ilustrará el uso de estrategias de creación de capacidades y de organización como lo son el contacto con actores institucionales y no gubernamentales, la formación de coaliciones y estrategias argumentativas, entre otras. Finalmente, este artículo concluirá que dichas acciones permitieron la promoción de la agenda de política exterior de Trinidad y Tobago a través de la creación de hojas de ruta y la coordinación de la incertidumbre con el Protocolo de Kioto. Para hacer esto, este trabajo se concentrará en examinar conceptos como vulnerabilidad y priorización, asimismo contrastando diferentes artículos académicos en la materia junto con documentos oficiales de Trinidad y Tobago.

Portuguese ecotypes of Opuntia ficus-indica differ in biomass production

The Opuntia ficus-indica (L.) Miller is a species from the Cactaceae family with the center of origin and domestication in central Mexico. This species introduction in the Iberia Peninsula occurred, probably, by the end of the 15th century, after the discovery of America, spreading later throughout the Mediterranean basin. In Portugal, O. ficus-indica is located, usually, with a typical ruderal behavior, at the edge of roads and paths. In Portugal, as in other Mediterranean regions, inlands areas are under severe draught during extensive summers, in particular, and global warming is expected to affect them deeply in the near future. O. ficus-indica, by its morpho-physiological characteristics and multiple economic uses, represent an alternative crop for those regions. Sixteen Portuguese O. ficus indica ecotypes and two ‘Italian’ cultivars ("Gialla" and "Bianca") were evaluated for plant vigor and biomass production, by nondestructive methods, in the two years following planting. Biomass production and plant vigor were measured by estimating cladode number, cladode area and fresh weight per plant. Linear models to predict the area of cladodes and fresh weight per plant were previously established using a biometric analysis of 180 cladodes. It was not possible to establish an accurate linear model for dry matter using non-destructive estimation. Significant differences were found among populations in the studied biomass-related parameters, and different groups were unfolded. A group of four Portuguese ecotypes outperformed in terms of biomass production, comparable with the “Gialla” cultivar. This group could be used to start a breeding program with the objective of deploy material for animal feeding, biomass and fruit production. Nevertheless, the ‘Gialla’ cultivar showed the best performance, achieving the highest biomass related parameters, not surprisingly for it is an improved plant material.

Cambio de paradigma energético y las nuevas tecnologías

Considering the wide implications of global warming it is evident the need, not only of diminishing the energy consumption patterns, but of diversifying to “sustainable” energy resources. Moreover, within the frame of national security, this requires tore-think the managing and use of available resources, because any change of the energy paradigm will depend, at least at the beginning, on fossil energy.Considering the above, the following paper opens a discussion about energy, entropy and the limits of economic growth, following the premises of the school of ecological economics. It offers several empirical data about the situation of the current energy pattern, mostly about its socio-environmental aspects. The paper ends discussing the characteristics and limitations of the main available alternative energies; meanwhile it highlights the relevance of contemporary patterns of territorial organization. It concludes pointing out the inherent need of diminishing the type and rhythm of current energy consumption.