Mass breeding of silver carp in a cement cistern with crude H.C.G.

The paper presents a resume on experiments carried on mass breeding of the silver carp Hypophthalmichthys molitrix in a cement cistern through administration of crude human chorionic gonadotropin. The experiments proves that human chorionic gonadotropin (H.C.G.) can be used for mass breeding of the fish in simple enclosures, with facilities of some input and output of water and a dose of 5 mg/kg and 18 mg/kg of body weight, for males and females respectively are required for the purpose. Observations were made by using pituitary glands in similar way. For successful breeding of about 80 kg female together, the expenditure towards cost of pituitary gland and H.C.G. are respectively 275 and 117 Rs.

Effect of brood source on the growth of rohu (Labeo rohita Ham.) fingerlings reared in glass tanks with formulated diets

A 60 day long feeding trial was conducted in an indoor static water system with rohu fingerlings (Labeo rohita Ham.) originating from wild brood, private and public hatcheries (denoted as A B and C respectively). They were fed on formulated diet having 34% crude protein level using indigenous ingredients. The effect of brood source on growth as well as their responses to formulated diet was observed. On the basis of the observed growth rate, food conversion ratio, protein efficiency ratio, apparent net protein utilization and apparent protein digestibility, fingerling source A showed significantly (p<0.05) higher growth, while the sources B and C produced no significantly different (p>0.05) in terms of these parameters. The results of the present study demonstrated that the fingerlings of wild source were of best quality in terms of growth and food utilization in comparison to those had the sources from hatcheries.

Culture feasibility of african catfish (Clarias gariepinus Lin.) fry in glass tank and synthetic hapa system using supplemental diets

An experiment was carried out with 1 0 days old Clarias gariepinus fry over a period of 42 days to determine the effects of different feeds on growth and survival of African catfish fry in glass tanks. The experiment was designed into four treatments each having three replications. Thus treatment 1 (T1) was named as Tank Tubifex (TT) and treatment 2 (T2) as Tank Sabinco (TS), treatment 3 as Pond Tubifex (PT), and treatment 4 (T4) as Pond Sabinco (PS). Live Tubifex (protein levels 64.48%) was supplied to treatments 1 and 3 and rest of the treatments were supplied Sabinco starter-1 (protein levels 40.13%). The highest and the lowest growth in total length and weight were 12.90cm, 18.77g and 6.17cm, 4.04g recorded from the treatments 3 and 2, respectively. Growth of catfish fry under treatment 3 in terms of both length and weight were significantly higher (P<0.01) than those of the other treatments. However treatment 2 showed the significantly lowest (P<0.01) growth performance among the various treatments. The highest survival rate (92%) was also obtained with treatment 3. Tubifex proved to be the best larval feed in respect of growth and survival rate.

Transitions in the erosive wear behavior of a glass-ceramic

The mechanisms of material removal were investigated during the erosive wear of a glass-ceramic. The effects of erodent particle shape, velocity and angle were studied. Single impacts and incremental erosion tests were performed, to study the development of surface features and to elucidate the mechanisms of material removal. It was found that transitions in mechanism occurred which depended on the particle shape, impact velocity and impact angle. The mechanisms of material removal, for erosion by silica sand, changed from fine scale fracture and plastic processes below a transition point to large-scale cracking of the surface above. Spherical glass beads caused wear dominated by fatigue, with a very strong dependence of wear rate on the impact conditions. This work indicates that laboratory erosion testing of glass-ceramic and other brittle materials should reflect the conditions present in practice, and that account must be taken of possible changes in wear mechanisms.

Waveguide lasers in Er:Yb-doped phosphate glass fabricated by femtosecond laser writing

Advanced waveguide lasers, operating both in continuous wave and pulsed regimes, have been realized in an active phosphate glass by direct writing with femtosecond laser pulses. Stable single mode operation was obtained; the laser provided more than 50 m W in single longitudinal and transverse mode operation with 21% slope efficiency. Furthermore, by combining a high gain waveguide and an innovated fiber-pigtailed saturable absorber based on carbon nanotubes, a mode-locked ring laser providing transform limited 1.6 ps pulses was demonstrated. © 2007 IEEE.

Durability study of eleven years old cement-bentonite cut-off wall material

Comprehensive understanding of the long-term performance of cement-bentonite slurry trench cut-off walls is essential as these mixes may degrade when exposed to aggressive environments or when subjected to prolonged drying. A series of wetting-drying and immersion experiments was carried out to evaluate the durability characteristics of laboratory mixed samples and block field samples from 40 days to 11 years of age. For the wetting-drying tests, the samples buried in medium graded sand were subjected to periodical flooding and drying cycles. They were then used for permeability testing and unconfined compressive strength (UCS) testing. For the immersion tests, the samples confined in perforated molds were submerged in magnesium sulfate solution for 16 weeks and their microstructures were then analyzed using X-ray diffraction (XRD) technique. This paper identifies the effects of contaminant exposure on durability of cement-bentonite and the effects of aging by comparing 11 years old samples to younger samples. Test results showed that young or previously contaminated cement-bentonite mixes are more susceptible to sulfate attack than old or less contaminated mixes. Copyright ASCE 2008.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

A wider choice of construction materials for the modern fishing boats

An account of fishing vessel construction materials is given, with information on essential features, and a material account. Materials discussed in detail are steel, wood, aluminium, glass reinforced plastic, and ferro-cement.

Improved cement block fish smoking kiln

The kiln described below is based on a portable sheet steel kiln designed by Beny in 1964. Improvement of quality of the final product, increased operating efficiency and reduction in firewood consumption were the reasons prompting the design. The design discussed was evolved by the author after a number of experimental prototypes were built, in order to reduce first cost and heat losses, both high with the all-steel kiln. Traditionally, a simple pit and table is used, around the shures of Lake Kyoga, for smoking fish.

Mode-locked and single-longitudinal-mode waveguide lasers fabricated by femtosecond laser pulses in Er:Yb-doped phosphate glass

Mode-locked and single-longitudinal-mode waveguide lasers, manufactured by femtosecond laser writing in Er-Yb-doped phosphate glasses, are presented. Transform-limited 1.6-ps pulses and a cw output power exceeding 50 mW have been obtained in the two regimes. © 2007 Optical Society of America.