A wider choice of construction materials for the modern fishing boats

An account of fishing vessel construction materials is given, with information on essential features, and a material account. Materials discussed in detail are steel, wood, aluminium, glass reinforced plastic, and ferro-cement.

Problems associated with the over protection of fishing trawlers against sea water corrosion and fouling

Some presently used anti-fouling materials contain metals and other compounds, which are toxic in the environment. Coating products are not always stable, and there is a resulting pollution hazard. In particular if surfaces are poorly prepared and manufactures' instructions are not closely followed the application of anti-fouling substances becomes pointless and dangerous. In addition the salinity, constant biological activity and suspended particles make seawater a highly corrosive material in its own right.

Reliability and need for standardisation of electrical systems in small wooden fishing vessels

The working condition and atmosphere in a wooden fishing vessel are generally most injurious to the electrical systems. Therefore great care has to be taken in designing electrical systems for small c1afts. This paper deals with the difficult operating conditions and standardisation of electrical systems as applicable to small fishing vessels.

Hydraulics for small fishing trawlers

Fishing vessels where electric power supply from alternator is available to operate various auxiliaries located anywhere in the vessel, the small crafts, which constitute over 95% of the total fishing crafts operating in India, are entirely dependent on one source of power, i. e. the main diesel engine. To utilize this source of motive power to operate the winches and other auxiliaries, mechanical drive involving shafts, bearings and pulleys, is inconvenient. This paper presents basic advantages of hydraulic system over mechanical drive.

Studies on long wing trawl for shrimps off Kakinada (A.P.) coast - (i) Results of comparative fishing experiments with the conventional two seam trawl

Comparative fishing operations with the conventional two seams net and a 29.26 m. long wing shrimp trawl of four seam type were undertaken. The result showed that the four seams net gave nearly twice prawn catch than that of the conventional type. It was also found that the four seams net can be developed into a combination trawl for the effective exploitation of both prawns and fish along the coasts off Kakinada.

Coloured gill nets for reservoir fishing

Experimental fishing with different coloured nets has shown that white net yields better catch. The efficiency of the coloured nets was in the order yellow, grey, green and blue. Though there is little evidence to show some species preference to a particular colour, the results were not conclusive as the analysis of variance indicated that interaction between species and colour is significant only at 5% level.

Investigations on the number of trials required for statistical comparison of fishing gears

The number of fishing trials required for comparing the efficiency of fishing gears was investigated. A unique solution to this problem did not appear to exist because of the heterogeneity of the experimental material. Sequential experimentation and analysis have been found to be a practical approach to this problem. By this, the experiment can be terminated almost after 35 days fishing for catches with standard error per unit as per cent of the mean about 30% or less (after logarithmic transformation). For data with mean catches less than 1.5 kg analysis of variance approach does not appear to be meaningful.

The effect of increase in the number of fishing trips on the economic efficiency of 9.82 m and 11 m fishing trawlers along Kerala coast

Cost-benefit analysis of a 9.82 m and 11 m fishing trawlers based on the number of fishing trips is presented. The number of fishing trips per year determines the profit and loss of the trawler. With the increase in the number of fishing trips, the profit also increase for both the sizes of trawlers. The minimum quantity of prawn and fish to be landed for 0-20% profit for varying number of fishing trips are worked out. The break-even for 9.82 and 11m trawlers was observed to be 185 and 210 fishing trips respectively during 1980-81.

Development of a torque meter for fishing vessels

The paper describes the development of an electronic instrument to measure the torque developed on the propeller shaft of fishing vessels at various speeds of the propeller. By measuring the torque, it is possible to determine the actual power transmitted from the engine gear-box unit to the propeller so that propeller efficiency can be evaluated and the optimum size of the propeller for a specific engine and vessel can be determined.

On the problem of nonadditivity in two-way analysis of variance of data for comparing the efficiency of fishing gears

To bring out the relative efficiency of various types of fishing gears, in the analysis of catch data, a combination of Tukey's test, consequent transformation and graphical analysis for outlier elimination has been introduced, which can be advantageously used for applying ANOVA techniques, Application of these procedures to actual sets of data showed that nonadditivity in the data was caused by either the presence of outliers, or the absence of a suitable transformation or both. As a corollary, the concurrent model: X sub(ij) = µ + α sub(i) + β sub(j) + λ α sub(i) β sub(j) + E sub(ij) adequately fits the data.

Vertical distribution of marine wood boring and fouling organisms from the estuarine areas of the south west coast of India

Vertical distribution of marine wood boring and fouling organisms from three different estuarine areas namely, the Ernakulam channel in the Cochin backwaters, Ayiramthengu in the Kayamkulam Lake and Neendakara in the Asthamudi Lake during the post-monsoon, the pre-monsoon and the monsoon periods is presented. The boring organisms noticed during the present study were Martesia striata, Teredo furcifera, Nausitora hedleyi and Sphaeroma terebrans. The dominant fouling organisms were Balanus amphitrite amphitrite, calcareous worms and Modiolus sp. Algae and diatoms were very common on the sub-tidal panels during the monsoon. The incidence of Teredo, Nausitora and calcareous tube worms were significantly high on the bottom panels. Sphaeroma, Balanus and Modiolus occurred in greater numbers on the intertidal panels.

A brief account on the 'Gunja Net' fishing of the Kutch Backwaters (Gujarat)

A survey was made of the fishing gear (Gunja net) and methods used in the prawn fishery of the coastal waters of the Gulf of Kutch.

A characterization of community fish refuge typologies in rice field fisheries ecosystems

In rural Cambodia, fish is a source of food and income to millions of people. However, there has been a real threat to fish populations in natural wetlands due to the degradation of aquatic biodiversity and habitat, illegal fishing, increase of population and demand for fish, and the use of harmful pesticides for agriculture. The Rice Field Fisheries Enhancement Project (RFFEP) seeks to rebuild and protect the fish populations through innovative methods. The project works with communities to sustainably strengthen the rice field fisheries near their villages by improving protected habitats called "community fish refuges". This handbook characterizes rice field fisheries that are connected to community fish refuges. Community fish refuges are designated fish conservation areas promoted by the Fisheries Administration of the Royal Cambodian Government. It also examines the characteristics of rain-fed rice field ecosystems that are connected to community fish refuges in order to further refine descriptive criteria and better understand potential benefits and management strategies.

On statistical comparison of efficiencies of fishing gear

The distribution of fish caught by experimental gill nets has been found to be in the Poisson or Negative binomial form. Using this information, application of Chi-square test as suggested by Mood et al. (1974) has been illustrated, for comparing the efficiencies of gill nets. This test provides an alternative to Anova F-test especially in the context of significance of non-additivity for the two-way model. Based on the present work and the findings by Nair (1982) and Nair & Alagaraja (1982, 1984) an outline approach for statistical comparison of the efficiencies of fishing gear is presented.

Adoption of CIFT fishing boat designs

Information about the adoption of CIFT fishing boat designs was collected from 54 boat building yards of the country. The majority of the boats were built as per CIFT designs. The types of wood used and the designs were dependent upon each other. Other variables studied did not show significant effects upon the type of adoption. The CIFT designs were modified at some yards and these details are discussed.