Human papillomavirus infection and vaccination: Awareness and knowledge of HPV and acceptability of HPV vaccine among mothers of teenage daughters in Weihai, Shandong, China

In preparation for the introduction of human papillomavirus (HPV) vaccine, we investigated awareness and knowledge of HPV/HPV vaccine and potential acceptability to HPV vaccine among mothers with a teenage daughter in Weihai, Shandong, China. A cross-sectional survey was conducted in 2013 with a sample of 1850 mothers who had a daughter (aged 9–17 years) attending primary, junior and senior high schools. In the final sample (N = 1578, response rate 85.30%), awareness of HPV was reported by 305 (19.32%) mothers. Awareness varied significantly by daughter’s age (P<0.01), mother’s education level (P<0.01), mother’s occupation (P<0.01), household income (P<0.01) and residence type (P<0.01). Knowledge about HPV/HPV vaccine was poor with a mean total score of 3.56 (SD = 2.40) out of a possible score of 13. Mothers with a higher education level reported higher levels of knowledge (P = 0.02). Slightly more than one-fourth (26.49%) of mothers expressed their potential acceptability of HPV vaccine for their daughters. Acceptability increased along with increased daughters’ age (P<0.01), household income (P<0.01) and knowledge level (P<0.01). House wives and unemployed mothers had the highest acceptability (P<0.01). The most common reasons for not accepting HPV vaccination were “My daughter is too young to have risk of cervical cancer (30.95%)”, “The vaccine has not been widely used, and the decision will be made after it is widely used (24.91%)”, “Worry about the safety of the vaccine (22.85%)”. Awareness and knowledge of HPV/HPV vaccines are poor and HPV vaccine acceptability is low among these Chinese mothers. These results may help inform appropriate health education programs in this population.

An explicit finite element modelling method for masonry walls under out-of-plane loading

An explicit finite element modelling method is formulated using a layered shell element to examine the behaviour of masonry walls subject to out-of-plane loading. Masonry is modelled as a homogenised material with distinct directional properties that are calibrated from datasets of a “C” shaped wall tested under pressure loading applied to its web. The predictions of the layered shell model have been validated using several out-of-plane experimental datasets reported in the literature. Profound influence of support conditions, aspect ratio, pre-compression and opening to the strength and ductility of masonry walls is exhibited from the sensitivity analyses performed using the model.

Knowledge discovery from tree databases using balanced optimal search

This research is a step forward in discovering knowledge from databases of complex structure like tree or graph. Several data mining algorithms are developed based on a novel representation called Balanced Optimal Search for extracting implicit, unknown and potentially useful information like patterns, similarities and various relationships from tree data, which are also proved to be advantageous in analysing big data. This thesis focuses on analysing unordered tree data, which is robust to data inconsistency, irregularity and swift information changes, hence, in the era of big data it becomes a popular and widely used data model.

How to Succeed in Knowledge Transfer : Case Study of Scandinavian Alliance in Ukraine

The current study of Scandinavian multinational corporate subsidiaries in the rapidly growing Eastern European market, due to their particular organizational structure, attempts to gain some new insights into processes and potential benefits of knowledge and technology transfer. This study explores how to succeed in knowledge transfer and to become more competitive, driven by the need to improve transfer of systematic knowledge for the manufacture of product and service provisions in newly entered market. The scope of current research is exactly limited to multinational corporations, which are defined as enterprises comprising entities in two or more countries, regardless of legal forms and field of activity of those entities, and which operate under a system of decision-making permitting coherent policies and a common strategy through one or more decision-making centers. The entities are linked, by ownership, and able to exercise influence over the activities of the others; and, in particular, to share the knowledge, resources, and responsibilities with others. The research question is "How and to which extent can knowledge-transfer influence a company's technological competence and economic competitiveness?" and try to find out what particular forces and factors affect the development of subsidiary competencies; what factors influence the corporate integration and use of the subsidiary's competencies; and what may increase competitiveness of MNC pursuing leading position in entered market. The empirical part of the research was based on qualitative analyses of twenty interviews conducted among employees in Scandinavian MNC subsidiary units situated in Ukraine, using structured sequence of questions with open-ended answers. The data was investigated by comparison case analyses to literature framework. Findings indicate that a technological competence developed in one subsidiary will lead to an integration of that competence with other corporate units within the MNC. Success increasingly depends upon people's learning. The local economic area is crucial for understanding competition and industrial performance, as there seems to be a clear link between the performance of subsidiaries and the conditions prevailing in their environment. The linkage between competitive advantage and company's success is mutually dependent. Observation suggests that companies can be characterized as clusters of complementary activities such as R&D, administration, marketing, manufacturing and distribution. Study identifies barriers and obstacles in technology and knowledge transfer that is relevant for the subsidiaries' competence development. The accumulated experience can be implemented in new entered market with simple procedures, and at a low cost under specific circumstances, by cloning. The main goal is focused to support company prosperity, making more profits and sustaining an increased market share by improved product quality and/or reduced production cost of the subsidiaries through cloning approach. Keywords: multinational corporation; technology transfer; knowledge transfer; subsidiary competence; barriers and obstacles; competitive advantage; Eastern European market

Digital access to knowledge in the preschool classroom: Reports from Australia

Australian preschool teachers’ use of Web-searching in their classroom practice was examined (N = 131). Availability of Internet-enabled digital technology and the contribution of teacher demographic characteristics, comfort with digital technologies and beliefs about their use were assessed. Internet-enabled technologies were available in 53% (n = 69) of classrooms. Within these classrooms, teacher age and beliefs predicted Web-searching practice. Although comfortable with digital access of knowledge in their everyday life, teachers reported less comfort with Web-searching in the context of their classroom practice. The findings identify the provision of Internet-enabled technologies and professional development as actions to support effective and confident inclusion of Web-searching in classrooms. Such actions are necessary to align with national policy documents that define acquisition of digital literacies as a goal and assert digital access to knowledge as an issue of equity.

Effects of externally supplied protein on root morphology and biomass allocation in Arabidopsis

Growth, morphogenesis and function of roots are influenced by the concentration and form of nutrients present in soils, including low molecular mass inorganic N (IN, ammonium, nitrate) and organic N (ON, e.g. amino acids). Proteins, ON of high molecular mass, are prevalent in soils but their possible effects on roots have received little attention. Here, we investigated how externally supplied protein of a size typical of soluble soil proteins influences root development of axenically grown Arabidopsis. Addition of low to intermediate concentrations of protein (bovine serum albumen, BSA) to IN-replete growth medium increased root dry weight, root length and thickness, and root hair length. Supply of higher BSA concentrations inhibited root development. These effects were independent of total N concentrations in the growth medium. The possible involvement of phytohormones was investigated using Arabidopsis with defective auxin (tir1-1 and axr2-1) and ethylene (ein2-1) responses. That no phenotype was observed suggests a signalling pathway is operating independent of auxin and ethylene responses. This study expands the knowledge on N form-explicit responses to demonstrate that ON of high molecular mass elicits specific responses.

Herbicide resistance modelling: Past, present and future

Computer simulation modelling is an essential aid in building an integrated understanding of how different factors interact to affect the evolutionary and population dynamics of herbicide resistance, and thus in helping to predict and manage how agricultural systems will be affected. In this review, we first discuss why computer simulation modelling is such an important tool and framework for dealing with herbicide resistance. We then explain what questions related to herbicide resistance have been addressed to date using simulation modelling, and discuss the modelling approaches that have been used, focusing first on the earlier, more general approaches, and then on some newer, more innovative approaches. We then consider how these approaches could be further developed in the future, by drawing on modelling techniques that are already employed in other areas, such as individual-based and spatially explicit modelling approaches, as well as the possibility of better representing genetics, competition and economics, and finally the questions and issues of importance to herbicide resistance research and management that could be addressed using these new approaches are discussed. We conclude that it is necessary to proceed with caution when increasing the complexity of models by adding new details, but, with appropriate care, more detailed models will make it possible to integrate more current knowledge in order better to understand, predict and ultimately manage the evolution of herbicide resistance. © 2014 Society of Chemical Industry.

Bayesian fisheries stock assessment: integrating and updating knowledge

In this thesis the use of the Bayesian approach to statistical inference in fisheries stock assessment is studied. The work was conducted in collaboration of the Finnish Game and Fisheries Research Institute by using the problem of monitoring and prediction of the juvenile salmon population in the River Tornionjoki as an example application. The River Tornionjoki is the largest salmon river flowing into the Baltic Sea. This thesis tackles the issues of model formulation and model checking as well as computational problems related to Bayesian modelling in the context of fisheries stock assessment. Each article of the thesis provides a novel method either for extracting information from data obtained via a particular type of sampling system or for integrating the information about the fish stock from multiple sources in terms of a population dynamics model. Mark-recapture and removal sampling schemes and a random catch sampling method are covered for the estimation of the population size. In addition, a method for estimating the stock composition of a salmon catch based on DNA samples is also presented. For most of the articles, Markov chain Monte Carlo (MCMC) simulation has been used as a tool to approximate the posterior distribution. Problems arising from the sampling method are also briefly discussed and potential solutions for these problems are proposed. Special emphasis in the discussion is given to the philosophical foundation of the Bayesian approach in the context of fisheries stock assessment. It is argued that the role of subjective prior knowledge needed in practically all parts of a Bayesian model should be recognized and consequently fully utilised in the process of model formulation.

e-Extinction: an illusion of knowledge, the presence of ignorance, or evolutionary fate?

At present, the rate of small firm adoption of the Internet's ubiquitous World Wide Web (the web) far exceeds the actual exploitation its commercial potential. An inability to strategically acquire, comprehend and use external knowledge is proposed as a major barrier to optimal exploitation of the Internet. This paper discusses the limitations of applying market orientation theory to explain and guide small firm exploitation of the web. Absorptive capacity is introduced as an alternative theory that when viewed from an evolutionary perspective provides potentially more insightful discussion. An inability to detect emerging business model dominant designs is suggested to be a mixture of the nature of the technology that supports the Internet and underdeveloped small firm knowledge processing capabilities. We conclude with consideration of the practical and theoretical implications that arise from the paper.

The student business plan: Useful or not?

This article offers a critical discussion of the role of the business plan in current enterprise educational practice. In addition to reviewing recent work that considers the ‘for’ and ‘against’ arguments about the use of business plans in higher education, the authors suggest that the context of student learning is largely omitted from these discussions. As such, they contextualize the debate so that the purpose of the business plan can be better appreciated. They build on recent work that offers alternatives to the business plan – approaches directly focused on customer discovery and explicit testing of assumptions. In doing so, recent concerns about the value of business plans and, conversely, the views of those who argue in favour of the role of business plans in enterprise education, are noted. The article provides insights into emerging alternative practices in the field of enterprise education, practices based on students’ use of such education as a vehicle for skills and knowledge development and/or wealth creation. It is acknowledged that various biases are present in the current debate, including those of the present authors: whilst it is accepted that these biases are unlikely to disappear, the article contextualizes their origins.

The perfect corporate fit: New knowledge for new times

This study examines the impact of corporate practice on schooling and on teachers' professional development at the end of the millennium. It is argued that the production of new forms of knowledge is creating new sites of struggle over who owns educational knowledge, and this has profound implications for professional identity formation in all areas of social and economic endeavour, including education. As schools are re-shaped into corporations, school administrators and teachers are under increasing pressure to improve their productivity and to develop themselves as enterprising leaders and managers. To do so they are drawing more and more heavily on the growing non-academic literature of selfimprovement and self-development. Concern is expressed that such literature tends to value mindless optimism over radical doubt.

Studies on the out-of-plane behaviour of masonry walls

The prime aim of this PhD thesis is to contribute to the current body of knowledge on the out-of-plane performance of masonry walls through systematic investigation of the key parameters and provide insight into the design clauses of Australian Masonry Standard (AS3700-2011). The research work has been carried out through numerical simulation based on a 3D layered shell element model. The model demonstrated capability to simulate various forms of new and existing masonry systems commonly constructed in Australia such as unreinforced, internally and externally reinforced, confined and dry-stack masonry. In addition, the model simultaneously simulates in-plane and out-of-plane responses.