The accumulation process and agrofood networks in Latin America

Includes bibliography

Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Tumor-associated macrophages and the profile of inflammatory cytokines in oral squamous cell carcinoma

Objective: To evaluate and characterize macrophage populations (M1/M2) in the tumor microenvironment of oral cavity squamous cell carcinoma (OCSCC). The relationship between macrophages and clinicopathological factors, such as survival data, lymph node metastasis, tumoral proliferation, and WHO histological grading are also analyzed. Materials and methods: The samples consisted of surgically excised specimens from patients with non-metastatic and metastatic OCSCC and normal oral mucosa (control). Immunohistochemistry, flow cytometry, and qRT-PCR were used to evaluate macrophage populations and the expression of pro- (IL-12, IL-23, and INF-γ) and anti-inflammatory (IL-10 and TGF-β) cytokines. The level required for statistical significance was defined as p < 0.05. Results: The data showed a predominance of M2 phenotype (high percentage of IL-10+TGF-β+) macrophages in the tumor microenvironment of OCSCC. A higher percentage of macrophages expressing TGF-β was seen in the OCSCC group when compared with healthy individuals. The assessment of mRNA expression also presented a greater expression of anti-inflammatory cytokines TGFβ and IL10 in OCSCC when compared with the control group. The percentage of macrophages, demonstrated by immunohistochemistry, was significantly higher in the metastatic OCSCC group than in the non-metastatic and control groups. The log-rank test also showed that the mean survival time for patients with high levels of macrophages was less (44 months) when compared with patients with a low percentage of such cells (93 months). Conclusion: A predominance of the M2 phenotype in the tumor microenvironment of OCSCC could contribute to local immunosuppression, via TGF-β production, and consequently greater lymph node involvement and reduced patient survival time. © 2012 Elsevier Ltd. All rights reserved.

Nasal administration of liquid crystal precursor mucoadhesive vehicle as an alternative antiretroviral therapy

The purpose of this study was to develop a mucoadhesive stimuli-sensitive drug delivery system for nasal administration of zidovudine (AZT). The system was prepared by formulating a low viscosity precursor of a liquid crystal phase, taking advantage of its lyotropic phase behavior. Flow rheology measurements showed that the formulation composed of PPG-5-CETETH-20, oleic acid and water (55, 30, 15% w/w), denominated P, has Newtonian flow behavior. Polarized light microscopy (PLM) revealed that formulation P is isotropic, whereas its 1:1 (w/w) dilution with artificial nasal mucus (ANM) changed the system to an anisotropic lamellar phase (PD). Oscillatory frequency sweep analysis showed that PD has a high storage modulus (G′) at nasal temperatures. Measurement of the mucoadhesive force against excised porcine nasal mucosa or a mucin disk proved that the transition to the lamellar phase tripled the work of mucoadhesion. Ex vivo permeation studies across porcine nasal mucosa exhibited an 18-fold rise in the permeability of AZT from the formulation. The Weibull mathematical model suggested that the AZT is released by Fickian diffusion mechanisms. Hence, the physicochemical characterization, combined with ex vivo studies, revealed that the PPG-5-CETETH-20, oleic acid, and water formulation could form a mucoadhesive matrix in contact with nasal mucus that promoted nasal absorption of the AZT. For an in vivo assessment, the plasma concentrations of AZT in rats were determined by HPLC method following intravenous and intranasal administration of AZT-loaded P formulation (PA) and AZT solution, respectively, at a dose of 8 mg/kg. The intranasal administration of PA resulted in a fast absorption process (Tmax = 6.7 min). Therefore, a liquid crystal precursor formulation administered by the nasal route might represent a promising novel tool for the systemic delivery of AZT and other antiretroviral drugs. In the present study, the uptake of AZT absorption in the nasal mucosa was demonstrated, providing new foundations for clinical trials in patients with AIDS. © 2012 Elsevier B.V. All rights reserved.

The dimensionality of ecological networks

How many dimensions (trait-axes) are required to predict whether two species interact? This unanswered question originated with the idea of ecological niches, and yet bears relevance today for understanding what determines network structure. Here, we analyse a set of 200 ecological networks, including food webs, antagonistic and mutualistic networks, and find that the number of dimensions needed to completely explain all interactions is small (< 10), with model selection favouring less than five. Using 18 high-quality webs including several species traits, we identify which traits contribute the most to explaining network structure. We show that accounting for a few traits dramatically improves our understanding of the structure of ecological networks. Matching traits for resources and consumers, for example, fruit size and bill gape, are the most successful combinations. These results link ecologically important species attributes to large-scale community structure. © 2013 Blackwell Publishing Ltd/CNRS.

Role of interstitial pinning in the dynamical phases of vortices in superconducting films

We analyze the vortex dynamics in superconducting thin films with a periodic array of pinning centers. In particular, we study the effect of anisotropy for a Kagomé pinning network when longitudinal and transverse transport currents are applied. By solving the equations of motion for the vortex array numerically at zero temperature, we find different phases for the vortex dynamics, depending on the pinning and driving force. An unusual sequence of peaks for driving force along and perpendicular to the main lattice axes is observed for the differential resistance, reflecting the anisotropy of the transport properties and the complex behavior of the vortex system. This behavior may be understood in terms of interstitial pinning vacancies, which create channels of vortices with different pinning strengths. © 2012 Springer Science+Business Media, LLC.

Design and development of a low-cost solar tracker

To become competitive, ultimately, photovoltaics should have its costs reduced and use photovoltaic systems of greater efficiency. The main steps in this direction are the use of new materials, the improvement in the manufacture of modules and the adoption of techniques of maximum power point tracking and of solar tracking. This article aims at presenting the project and development of an azimuth and elevation solar tracker, based on a new conception of the positioning sensor, composed of an array of four photoresistors. The two direct current motors that operate in the vertical and horizontal axes are controlled by a proportional-integral microcontroller. The conditions of the project were low cost, small energy consumption and versatility. The microcontroller can also incorporate a maximum power point tracking algorithm. The performance of solar tracker prototype in the initial phase of field tests can be considered appropriate. © Institution of Engineers Australia, 2013.

Branchial O2 chemoreceptors in Nile tilapia Oreochromis niloticus: Control of cardiorespiratory function in response to hypoxia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of inteins in the Candida parapsilosis complex for simple and accurate species identification

Inteins are coding sequences that are transcribed and translated with flanking sequences and then are excised by an autocatalytic process. There are two types of inteins in fungi, mini-inteins and full-length inteins, both of which present a splicing domain containing well-conserved amino acid sequences. Full-length inteins also present a homing endonuclease domain that makes the intein a mobile genetic element. These parasitic genetic elements are located in highly conserved genes and may allow for the differentiation of closely related species of the Candida parapsilosis (psilosis) complex. The correct identification of the three psilosis complex species C. parapsilosis, Candida metapsilosis, and Candida orthopsilosis is very important in the clinical setting for improving antifungal therapy and patient care. In this work, we analyzed inteins that are present in the vacuolar ATPase gene VMA and in the threonyl-tRNA synthetase gene ThrRS in 85 strains of the Candida psilosis complex (46 C. parapsilosis, 17 C. metapsilosis, and 22 C. orthopsilosis). Here, we describe an accessible and accurate technique based on a single PCR that is able to differentiate the psilosis complex based on the VMA intein. Although the ThrRS intein does not distinguish the three species of the psilosis complex by PCR product size, it can differentiate them by sequencing and phylogenetic analysis. Furthermore, this intein is unusually present as both mini- and full-length forms in C. orthopsilosis. Additional population studies should be performed to address whether this represents a common intraspecific variability or the presence of subspecies within C. orthopsilosis. Copyright © 2013, American Society for Microbiology. All Rights Reserved.

Produção de matéria seca da braquiária de acordo com os atributos químicos de um Latossolo em Selvíria, Mato Grosso do Sul

Rustic forages as the signal-grass are predominant in areas of Cerrado in extensive livestock systems that favor soil degradation. However, with time, not even these forages can have a good development in those areas. The objective of this study was to analyze the variability of plant and soil attributes; to define the linear and spatial correlations between signal-grass yield and the chemical attributes of the studied soil, and to evaluate, among the chemical attributes of the soil, which one that best explain the variability in this forage yield. The experiment was conducted in an area that had been under pasture for more than 30 years, belonging to UNESP - Ilha Solteira Campus, located in Selvíria - MS. A geostatistical grid was installed in an oxisol, for soil and plant data collection, with 121 sampling stations, consisted of eleven transections with 160 m width in the direction of the Cartesian axes. The dry mass yield of signal-grass was low, presenting high variation. The attributes MSr, N, PB, MO1, MO2, pHa1, pHa2, pHk1 and pHk2 did not vary at random. They presented data variability from low to high and followed clearly defined spatial patterns, ranging between 17.7-162.9 m. There was significant linear correlation at 1% between MSr and N leaf, and between MSr and PB. The cross semivariograms MSr=f(N) and MSr=f(PB) confirmed that the dry matter can be estimated from data of nitrogen leaf and crude protein content of this forage.

Henneguya nagelii n. sp. (Myxozoa: Myxobolidae) in Cyphocharax nagelii (Steindachner, 1881) (Teleostei: Characiformes: Curimatidae) from the Peixe's River, São Paulo State, Brazil

A new species of Myxosporea, Henneguya nagelii n. sp., is described parasitizing the gills of Cyphocharax nagelii collected from Peixe's River, São Paulo State, Brazil. Among the fish examined, 16.7 % had gills parasitized by myxosporeans. The plasmodia were white, round, or oval and measured 150-250 μm. The mature spores were fusiform and had smooth wall. The spores measurements were the following: total length, 34.5 ± 4.2 (26.4-39.9) μm; body length, 12.0 ± 0.5 (11.2-11.9) μm; body width, 4.9 ± 0.3 (4.4-5.5) μm; and caudal process length, 22.4 ± 4.0 (14.7-27.3) μm. The polar capsules were elongated and of unequal size, with lengths of 4.9 ± 0.4 (4.0-5.9) μm and 5.2 ± 0.4 (4.6-6.0) μm for the longest and shortest axes, respectively. Capsule width was 1.8 ± 0.2 (1.5-2.2) μm. Each capsule contained a polar filament with six to eight turns. There was no mucous envelope or iodinophilous vacuole. Morphometric differences between this parasite and other species of the genus Henneguya indicated that the parasite observed in C. nagelii is a new species. This is the first species of Myxosporea described in Peixe's River. © 2013 Springer-Verlag Berlin Heidelberg.

Letramento digital e letramento escolar: uma abordagem linguística da prática de escrita em blogs

Pós-graduação em Estudos Linguísticos - IBILCE

Influência da injunção da base na fototriangulação de imagens obtidas com uma unidade de mapeamento móvel

Pós-graduação em Ciências Cartográficas - FCT

O contexto educativo e cultural da pobreza no ensino público municipal em São Bernardo do Campo

Pós-graduação em Artes - IA

Sensor eletro-óptico de tensões elevadas e sua viabilidade para implementação de TP óptico

Pós-graduação em Engenharia Elétrica - FEIS