Contribution de la motivation dans les jeux sérieux

La motivation incite les apprenants à s’engager dans une activité et à persévérer dans son accomplissement afin d’atteindre un but. Dans les Systèmes Tutoriels Intelligents (STI), les études sur la motivation des apprenants possèdent trois manques importants : un manque de moyens objectifs et fiables pour évaluer cet état, un manque d’évaluation de rôles joués par les facteurs motivationnels conçus dans l’environnement d’apprentissage et un manque de stratégies d’interventions motivationnelles pour soutenir la motivation des apprenants. Dans cette thèse, nous nous intéressons à mieux comprendre l’état de la motivation des apprenant ainsi que les facteurs et stratégies motivationnels dans un environnement d’apprentissage captivant : les jeux sérieux. Dans une première étude, nous évaluons la motivation des apprenants par l’entremise d’un modèle théorique de la motivation (ARCS de Keller) et de données électro-physiologiques (la conductivité de la peau, le rythme cardiaque et l’activité cérébrale). Nous déterminons et évaluons aussi quelques situations ou stratégies favorisant la motivation dans l’environnement des jeux sérieux étudié. Dans une deuxième étude, nous développons un prototype de jeux sérieux intégrant – dans une première version – quelques éléments motivationnels issus de jeux vidéo et – dans une deuxième version – des stratégies motivationnelles d’un modèle théorique de la motivation. Nous espérons, avec une évaluation motivationnelle de notre prototype, soutenir les apprenants à atteindre des hauts niveaux de motivation, de persévérance et de performance.

Développement d’outils utilisant la surveillance biologique pour évaluer l’exposition et les risques pour la santé : application au méthylmercure et au sélénium

Dans une perspective d’analyse des risques pour la santé publique, l’estimation de l’exposition revêt une importance capitale. Parmi les approches existantes d’estimation de l’exposition, l’utilisation d’outils, tels que des questionnaires alimentaires, la modélisation toxicocinétique ou les reconstructions de doses, en complément de la surveillance biologique, permet de raffiner les estimations, et ainsi, de mieux caractériser les risques pour la santé. Ces différents outils et approches ont été développés et appliqués à deux substances d’intérêt, le méthylmercure et le sélénium en raison des effets toxiques bien connus du méthylmercure, de l’interaction entre le méthylmercure et le sélénium réduisant potentiellement ces effets toxiques, et de l’existence de sources communes via la consommation de poisson. Ainsi, l’objectif général de cette thèse consistait à produire des données cinétiques et comparatives manquantes pour la validation et l’interprétation d’approches et d’outils d’évaluation de l’exposition au méthylmercure et au sélénium. Pour ce faire, l’influence du choix de la méthode d’évaluation de l’exposition au méthylmercure a été déterminée en comparant les apports quotidiens et les risques pour la santé estimés par différentes approches (évaluation directe de l’exposition par la surveillance biologique combinée à la modélisation toxicocinétique ou évaluation indirecte par questionnaire alimentaire). D’importantes différences entre ces deux approches ont été observées : les apports quotidiens de méthylmercure estimés par questionnaires sont en moyenne six fois plus élevés que ceux estimés à l’aide de surveillance biologique et modélisation. Ces deux méthodes conduisent à une appréciation des risques pour la santé divergente puisqu’avec l’approche indirecte, les doses quotidiennes estimées de méthylmercure dépassent les normes de Santé Canada pour 21 des 23 volontaires, alors qu’avec l’approche directe, seulement 2 des 23 volontaires sont susceptibles de dépasser les normes. Ces différences pourraient être dues, entre autres, à des biais de mémoire et de désirabilité lors de la complétion des questionnaires. En outre, l’étude de la distribution du sélénium dans différentes matrices biologiques suite à une exposition non alimentaire (shampoing à forte teneur en sélénium) visait, d’une part, à étudier la cinétique du sélénium provenant de cette source d’exposition et, d’autre part, à évaluer la contribution de cette source à la charge corporelle totale. Un suivi des concentrations biologiques (sang, urine, cheveux et ongles) pendant une période de 18 mois chez des volontaires exposés à une source non alimentaire de sélénium a contribué à mieux expliciter les mécanismes de transfert du sélénium du site d’absorption vers le sang (concomitance des voies régulées et non régulées). Ceci a permis de montrer que, contrairement au méthylmercure, l’utilisation des cheveux comme biomarqueur peut mener à une surestimation importante de la charge corporelle réelle en sélénium en cas de non contrôle de facteurs confondants tels que l’utilisation de shampoing contenant du sélénium. Finalement, une analyse exhaustive des données de surveillance biologique du sélénium issues de 75 études publiées dans la littérature a permis de mieux comprendre la cinétique globale du sélénium dans l’organisme humain. En particulier, elle a permis le développement d’un outil reliant les apports quotidiens et les concentrations biologiques de sélénium dans les différentes matrices à l’aide d’algorithmes mathématiques. Conséquemment, à l’aide de ces données cinétiques exprimées par un système d’équations logarithmiques et de leur représentation graphique, il est possible d’estimer les apports quotidiens chez un individu à partir de divers prélèvements biologiques, et ainsi, de faciliter la comparaison d’études de surveillance biologique du sélénium utilisant des biomarqueurs différents. L’ensemble de ces résultats de recherche montre que la méthode choisie pour évaluer l’exposition a un impact important sur les estimations des risques associés. De plus, les recherches menées ont permis de mettre en évidence que le sélénium non alimentaire ne contribue pas de façon significative à la charge corporelle totale, mais constitue un facteur de confusion pour l’estimation de la charge corporelle réelle en sélénium. Finalement, la détermination des équations et des coefficients reliant les concentrations de sélénium entre différentes matrices biologiques, à l’aide d’une vaste base de données cinétiques, concourt à mieux interpréter les résultats de surveillance biologique.

Études génétiques moléculaires des gènes de la polarité planaire cellulaire dans les anomalies du tube neural chez l’Homme

Les anomalies du tube neural (ATN) sont des malformations congénitales parmi les plus fréquentes chez l’humain en touchant 1-2 nouveau-nés par 1000 naissances. Elles résultent d’un défaut de fermeture du tube neural pendant l’embryogenèse. Les formes les plus courantes d'ATN chez l'homme sont l'anencéphalie et le spina-bifida. Leur étiologie est complexe impliquant à la fois des facteurs environnementaux et des facteurs génétiques. Un dérèglement dans la signalisation Wnt, incluant la signalisation canonique Wnt/β-caténine et non-canonique de la polarité planaire cellulaire (PCP), peut causer respectivement le cancer ou les anomalies du tube neural (ATN). Les deux voies semblent s’antagoniser mutuellement. Dans cette étude, nous investiguons les rôles de Lrp6 et deANKRD6, entant qu’interrupteurs moléculaires entre les deux voies de signalisation Wnt, et CELSR1, en tant que membre de la PCP, chez la souris mutante Skax26m1Jus, générée par l’agent mutagène N-Ethyl-N-Nitrosuera, et dans une cohorte de patients humains ATN. Pour Lrp6, nous avons démontré que Skax26m1Jus représente un allèle hypermorphe de Lrp6 avec une augmentation de l’activité de la signalisation Wnt/canonique et une diminution de l’activité JNK induite par la voie PCP. Nous avons également montré que Lrp6Skax26m1Jus interagit génétiquement avec un mutant PCP (Vangl2Lp) où les doubles hétérozygotes ont montré une fréquence élevée d’ATN et des défauts dans la polarité des cellules ciliées de la cochlée. Particulièrement, notre étude démontre l'association des nouvelles et rares mutations faux-sens dans LRP6 avec les ATN humaines. Nous montrons que trois mutations de LRP6 causent une activité canonique réduite et non-canonique élevée. Pour ANKRD6, nous avons identifié quatre nouvelles et rares mutations faux-sens chez 0,8% des patients ATN et deux chez 1,3% des contrôles. Notamment, seulement deux, des six mutations validées (p.Pro548Leu et p.Arg632His) ont démontré un effet significatif sur l’activité de ANKRD6 selon un mode hypomorphique. Pour CELSR1, nous avons identifié une mutation non-sens dans l'exon 1 qui supprime la majeure partie de la protéine et une délétionde 12 pb. Cette perte de nucléotides ne change pas le cadre de lecture et élimine un motif putatif de phosphorylation par la PKC " SSR ". Nous avons également détecté un total de 13 nouveaux et rares variants faux-sens qui avaient été prédits comme étant pathogènes in silico. Nos données confirment le rôle inhibiteur de Lrp6 dans la signalisation PCP pendant la neurulation et indiquent aussi que les mutations faux-sens identifiées chez LRP6 et ANKRD6 pourraient affecter un équilibre réciproque et un antagonisme très sensible à un dosage précis entre les deux voies Wnt. Ces variants peuvent aussi agir comme facteurs prédisposants aux ATN. En outre, nos résultats impliquent aussi CELSR1 comme un facteur de risque pour les anomalies du tube neural ou l’agénésie caudale. Nos résultats fournissent des preuves supplémentaires que la voie de signalisation PCP a un rôle pathogène dans ces malformations congénitales et un outil important pour mieux comprendre leurs mécanismes moléculaires.

Growth and Characterisation of Radio Frequency Magnetron Sputttered Indium Tin Oxide Thin Films

The increasing interest in the interaction of light with electricity and electronically active materials made the materials and techniques for producing semitransparent electrically conducting films particularly attractive. Transparent conductors have found major applications in a number of electronic and optoelectronic devices including resistors, transparent heating elements, antistatic and electromagnetic shield coatings, transparent electrode for solar cells, antireflection coatings, heat reflecting mirrors in glass windows and many other. Tin doped indium oxide (indium tin oxide or ITO) is one of the most commonly used transparent conducting oxides. At present and likely well into the future this material offers best available performance in terms of conductivity and transmittivity combined with excellent environmental stability, reproducibility and good surface morphology. Although partial transparency, with a reduction in conductivity, can be obtained for very thin metallic films, high transparency and simultaneously high conductivity cannot be attained in intrinsic stoichiometric materials. The only way this can be achieved is by creating electron degeneracy in a wide bandgap (Eg > 3eV or more for visible radiation) material by controllably introducing non-stoichiometry and/or appropriate dopants. These conditions can be conveniently met for ITO as well as a number of other materials like Zinc oxide, Cadmium oxide etc. ITO shows interesting and technologically important combination of properties viz high luminous transmittance, high IR reflectance, good electrical conductivity, excellent substrate adherence and chemical inertness. ITO is a key part of solar cells, window coatings, energy efficient buildings, and flat panel displays. In solar cells, ITO can be the transparent, conducting top layer that lets light into the cell to shine the junction and lets electricity flow out. Improving the ITO layer can help improve the solar cell efficiency. A transparent ii conducting oxide is a material with high transparency in a derived part of the spectrum and high electrical conductivity. Beyond these key properties of transparent conducting oxides (TCOs), ITO has a number of other key characteristics. The structure of ITO can be amorphous, crystalline, or mixed, depending on the deposition temperature and atmosphere. The electro-optical properties are a function of the crystallinity of the material. In general, ITO deposited at room temperature is amorphous, and ITO deposited at higher temperatures is crystalline. Depositing at high temperatures is more expensive than at room temperature, and this method may not be compatible with the underlying devices. The main objective of this thesis work is to optimise the growth conditions of Indium tin oxide thin films at low processing temperatures. The films are prepared by radio frequency magnetron sputtering under various deposition conditions. The films are also deposited on to flexible substrates by employing bias sputtering technique. The films thus grown were characterised using different tools. A powder x-ray diffractometer was used to analyse the crystalline nature of the films. The energy dispersive x-ray analysis (EDX) and scanning electron microscopy (SEM) were used for evaluating the composition and morphology of the films. Optical properties were investigated using the UVVIS- NIR spectrophotometer by recording the transmission/absorption spectra. The electrical properties were studied using vander Pauw four probe technique. The plasma generated during the sputtering of the ITO target was analysed using Langmuir probe and optical emission spectral studies.

OFFLINE AND ONLINE SOLID PHASE EXTRACTION/PRECONCENTRATION OF INORGANICS

Solid phase extraction (SPE) is a powerful technique for preconcentration/removal or separation of trace and ultra trace amounts of toxic and nutrient elements. SPE effectively simplifies the labour intensive sample preparation, increase its reliability and eliminate the clean up step by using more selective extraction procedures. The synthesis of sorbents with a simplified procedure and diminution of the risks of errors shows the interest in the areas of environmental monitoring, geochemical exploration, food, agricultural, pharmaceutical, biochemical industry and high purity metal designing, etc. There is no universal SPE method because the sample pretreatment depends strongly on the analytical demand. But there is always an increasing demand for more sensitive, selective, rapid and reliable analytical procedures. Among the various materials, chelate modified naphthalene, activated carbon and chelate functionalized highly cross linked polymers are most important. In the biological and environmental field, large numbers of samples are to be analysed within a short span of time. Hence, online flow injection methods are preferred as they allow extraction, separation, identification and quantification of many numbers of analytes. The flow injection online preconcentration flame AAS procedure developed allows the determination of as low as 0.1 µg/l of nickel in soil and cobalt in human hair samples. The developed procedure is precise and rapid and allows the analysis of 30 samples per hour with a loading time of 60 s. The online FI manifold used in the present study permits high sampling, loading rates and thus resulting in higher preconcentration/enrichment factors of -725 and 600 for cobalt and nickel respectively with a 1 min preconcentration time compared to conventional FAAS signal. These enrichment factors are far superior to hitherto developed on line preconcentration procedures for inorganics. The instrumentation adopted in the present study allows much simpler equipment and low maintenance costs compared to costlier ICP-AES or ICP-MS instruments.

Studies on Chemical Bath Deposited Semiconducting Copper Selenide and Iron Sulfide Thin Films Useful For Photovoltaic Applications

Chemical bath deposition (CBD)is one of the simplest, very convient and probably the cheapest method for thin film preparation. Photovoltaic is the cleanest and the most efficient mode of conversion of energy to electrical power. Silicon is the most popular material in this field. The present study on chemical bath deposited semiconducting copper selenide and iron sulfide thin films useful for photovoltaic applications. Semiconducting thin films prepared by chemical deposition find applications as photo detectors, solar control coatings and solar cells. Copper selenide is a p-type semiconductor that finds application in photovolitics. Several heterojunction systems such as Cu2-xSe/ZnSe (for injection electro luminescence), Cu2Se/AgInSe2 and Cu2Se/Si (for photodiodes), Cu2-xSe/CdS, Cu2-xSe/CdSe, CuxSe/InP and Cu2-xSe/Si for solar cells are reported. A maximum efficiency of 8.3% was achieved for the Cu2-xSe/Si cell, various preparation techniques are used for copper selenide like vacuum evaporation, direct reaction, electrodeposition and CBD. Instability of the as-prepared films was investigation and is accounted as mainly due to deviation from stoichiometry and the formation of iron oxide impurity. A sulphur annealing chamber was designed and fabricated for this work. These samples wee also analysed using optical absorption technique, XPS (X-ray Photoelectron Spectroscopy) and XRD.(X-Ray Diffraction).The pyrite films obtained by CBD technique showed amorphous nature and the electrical studies carried out showed the films to be of high resistive nature. Future work possible in the material of iron pyrite includes sulphur annealing of the non-stochiometric iron pyrite CBD thin films in the absence of atmospheric oxygen

Development of Photorefractive Polymers: Synthesis and Characterization of Polymers with Donor-Pi-Acceptor Groups

Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology

Elastic constant measurements of super ionic LiKSO4:Na single crystals

Elastic properties of sodium doped Lithium potassium sulphate, LiK0.9Na0.1SO4, crystal has been studied by ultrasonic Pulse Echo Overlap [PEO] technique and are reported for the first time. The controversy regarding the type of crystal found while growth is performed at 35 °C with equimolar fraction of Li2SO4H2O, K2SO4 and Na2SO4 has been resolved by studying the elastic properties. The importance of this crystal is that it exhibits pyroelectric, ferroelectric and electro optic properties. It is simultaneously ferroelastic and superionic. The elastic properties of LiK0.9Na0.1SO4 crystal are well studied by measuring ultrasonic velocity in the crystal in certain specified crystallographic directions and evaluating the elastic stiffness constants, compliance constants and Poisson’s ratios. The anisotropy in the elastic properties of the crystal are well explained by the pictorial representation of the surface plots of phase velocity, slowness and linear compressibility in a-b and a-c planes.

DOPAMINE D2 RECEPTOR FUNCTIONAL REGULATION : cAMP AND IP3 ROLE IN PANCREATIC REGENERATION

The present study deals with the differential regulation of Dopamine content in pancreas and functional regulation of Dopamine D2 receptor in brain regions such as hypothalamus, brain stem, cerebral cortex and corpus striatum play an important role during pancreatic islets cell proliferation and insulin secretion. Though may reports are there implicating the functional interaction between DA receptor and pancreatic islets cell insulin secretion, the involvement of specific DA D2 receptors and changes in second messenger system during insulin secretion and pancreatic islets cell proliferation were not given emphasis. Down regulation of DA content in brain regions and pancreatic islets were observed during pancreatic regeneration. Up regulation of DA content in plasma and adrenals down regulated sympathetic activity in pancreas which cause an increase in insulin secretion and pancreatic islets cell proliferation during pancreatic regeneration. There was a differential regulation of DA D2 receptor in brain regions. The pancreatic islets DA D2 receptors were lip regulated during pancreatic regeneration. DA D2 receptor activation at specific concentration has accounted for increased pancreatic islets cell proliferation. In vitro experiments have proved the differential regulation of DA on insulin synthesis and pancreatic islets cell proliferation. Inhibitory effect of DA on cAMP and stimulatory effect of DA on IP3 through DA D2 receptors were observed in in vitro cell culture system. These effects are correlating with the DA, cAMP and IP3 content during pancreatic regeneration and islets cell proliferation. Up regulation of intracellular Ca2+ was also observed at 10-8 M DA, a specific concentration of DA which showed maximum increase of IP3 content in pancreatic islets through DA D2 receptor activation in in vitro culture. These in vitro data was highly correlating with the changes in DA, cAMP and IP3 content in pancreas during pancreatic regeneration and insulin secretion. Thus we conclude that there is a differential functional regulation of DA and DA D2 receptors in brain and pancreas during pancreatic regeneration. In vitro studies confirmed a concentration depend functional regulation of DA through DA D2 receptors on pancreatic islets cell proliferation and insulin secretion mediated through increased cAMP, IP3 and intracellular Ca2+ level. This will have immense clinical significance in the management in diabetes mellitus.

Fabrication of Electrochemical Sensors for the Determination of Pharmaceuticals

Voltammetric sensors are an important class of electrochemical sensors in which the analytical information is obtained from the measurement of current obtained as a result of electrochemical oxidation/reduction.This current is proportional to the concentration of the analyte.Chemically modified electrodes(CMEs) have great significance as important analytical tools for the electrochemical determination of pharmaceuticals.The modification of electrode results in efficient determination of electro-active biomolecules at very lower potential without its major interferences.The operation mechanism of CMEs depends on the properties of the modifier materials that are used to promote selectivity towards the target analytes.Modified electrodes can be prepared by deposition of various compounds such as organic compounds ,conducting polymers,metal oxides,etc. on the various electrode surfaces.The thesis presents the development ,electrochemical characterization and analytical application studies of eight voltammetric sensors developed for six drugs viz.,Ambroxol,Sulfamethoxazole,PAM Chloride, Lamivudine,Metronidazole and Nimesulide.The modification techniques adopted as part of the present work include Multiwalled Carbon Nanotube(MWCNT) based modification.Electropolymerisation and Gold Nanoparticle (AuNP) based modifications.

Investigations on Dezincification of Brass and Epoxy Coated Brass

Brasses are widely used as constructional materials in marine environment due to their anticorrosive,antifouling and mechanical properties.However, its resistance to corrosion and fouling may vary according to local marine environmental condition and the seasons.The dezincification of brass is one of the forms of selective corrosion which has attracted the attention of researchers for the last two decades.Many of the dezincification mechanistic studies have been performed in noncomplex media and hence their conclusions cannot be extended to esturine water,which is of great significance since brass is extensively used in marine environment.Inhibited α brasses are largely immune to dezincication and the effect of tin and arsenic addition to α/beta brasses is not so reliable in controlling the dezincification. There have been many cases of dezincification in duplex brasses in both freshwater and seawater.Though there is some protection methods such as inhibitors,electro deposition and electro polymerization,there is no reliable method of inhibiting the dezincification of two-phase brass.Organic coatings are effectively used for the protection metals due to their capacity to act a physical barrieer between the metal surface and corrosive environment.Hence,pure epoxy coating is selected for this as it has antocorrosiion effect on brass.The dezincification behaviour of brass of the present study has been highlighted in terms of corrosion rate,weight gain/loss,corrosion current and polarization resistence,open circuit potential,dezincification factor. The marine fouling as biomass on brass was assessed and presented in this thesis, The physicochemical properties of estuarine water were correlated with corrosion behaviour of brass.The deterioration of the brass subjected to the effect of estuarine water was also investigated as a measure of loss in mechanical properties such as tensile strength,yield strength,percntage elongation and percentage reduction in area.To validate dezincification data,visual observation,spot analysis,surface morphology before and after removal of corrosion products and corrosion product analysis were performed.The dezincification behavior of epoxy coated brass of the present study has beenhighlighted in terms of corrosion rate ,weight gain/loss,corrosion current and polarization resistance,open circuit potential.dezincification factor.The marine fouling as biomass on epoxy coated brass subjeted to the effect of estuarine water was also investigated as ameasure of loss in mechanical properties such as tensile strength,percentage elongation and percentage reduction in area.The results of dezincification behavior of brass and epoxy coated brass in Cochin estuary water has been presented and discussed.Attempt has been made to correlate the dezincification behavior of brass with epoxy coated brass.

Design and development of an LED based fiber optic evanescent wave sensor for simultaneous detection of chromium and nitrite traces in water

The design and development of a cost-effective, simple, sensitive and portable LED based fiber optic evanescent wave sensor for simultaneously detecting trace amounts of chromium and nitrite in water are presented. In order to obtain the desired performance, the middle portions of two multimode plastic clad silica fibers are unclad and are used as the sensing elements in the two arms of the sensor. Each of the sensor arms is sourced by separate super bright green LEDs, which are modulated in a time-sharing manner and a single photo detector is employed for detecting these light signals. The performance and characteristics of this system clearly establish the usefulness of the technique for detecting very low concentrations of the dissolved contaminants.

Fabrication of Electrochemical Sensors for Pharmaceutical Analysis

Potentiometric chemical sensors,an important class of electro-chemical sensors are widely used in pharmaceutical analysis because of its inherent advantages.The present study was aimed at fabrication of potentiometric sensors for the drugs mebendazole,pefloxacin,ambroxol,sildenafil citrate,dextro-methorphan and tetracycline.A total of 18 sensors have been developed for the determination of theses drugs.The major step in the fabrication of the sensor was the preparation of the ion association.Two types of sensors viz:PVC membrane sensor and carbon paste electode (CPE) were fabricated.The response characteristics of the different sensors fabricated were studied.Various response parameters studied include response time,selectivity and the effect of pH.The developed sensors were also employed for the determination of the drugs in pharmaceutical formulations and also for the recovery of the drug from urine samples.The selectivity studies reveal that the developed sensors are highly selective to the drug even in prescence of foreign ions.

Energy Management in Wireless Sensor Networks: A Crosslayer,Channel Adaptive Approach Towards Performance Optimization

The proliferation of wireless sensor networks in a large spectrum of applications had been spurered by the rapid advances in MEMS(micro-electro mechanical systems )based sensor technology coupled with low power,Low cost digital signal processors and radio frequency circuits.A sensor network is composed of thousands of low cost and portable devices bearing large sensing computing and wireless communication capabilities. This large collection of tiny sensors can form a robust data computing and communication distributed system for automated information gathering and distributed sensing.The main attractive feature is that such a sensor network can be deployed in remote areas.Since the sensor node is battery powered,all the sensor nodes should collaborate together to form a fault tolerant network so as toprovide an efficient utilization of precious network resources like wireless channel,memory and battery capacity.The most crucial constraint is the energy consumption which has become the prime challenge for the design of long lived sensor nodes.

Investigations on polyaniline based systems for technologically important applications and some novel polymers as prospective candidates for fabricating polymer light emitting diodes

Light emitting polymers (LEP) have drawn considerable attention because of their numerous potential applications in the field of optoelectronic devices. Till date, a large number of organic molecules and polymers have been designed and devices fabricated based on these materials. Optoelectronic devices like polymer light emitting diodes (PLED) have attracted wide-spread research attention owing to their superior properties like flexibility, lower operational power, colour tunability and possibility of obtaining large area coatings. PLEDs can be utilized for the fabrication of flat panel displays and as replacements for incandescent lamps. The internal efficiency of the LEDs mainly depends on the electroluminescent efficiency of the emissive polymer such as quantum efficiency, luminance-voltage profile of LED and the balanced injection of electrons and holes. Poly (p-phenylenevinylene) (PPV) and regio-regular polythiophenes are interesting electro-active polymers which exhibit good electrical conductivity, electroluminescent activity and high film-forming properties. A combination of Red, Green and Blue emitting polymers is necessary for the generation of white light which can replace the high energy consuming incandescent lamps. Most of these polymers show very low solubility, stability and poor mechanical properties. Many of these light emitting polymers are based on conjugated extended chains of alternating phenyl and vinyl units. The intra-chain or inter-chain interactions within these polymer chains can change the emitted colour. Therefore an effective way of synthesizing polymers with reduced π-stacking, high solubility, high thermal stability and high light-emitting efficiency is still a challenge for chemists. New copolymers have to be effectively designed so as to solve these issues. Hence, in the present work, the suitability of a few novel copolymers with very high thermal stability, excellent solubility, intense light emission (blue, cyan and green) and high glass transition temperatures have been investigated to be used as emissive layers for polymer light emitting diodes.