Shear behaviour of steel-fibre-reinforced concrete simply supported beams

The structural behaviour of steel-fibre-reinforced concrete beams was studied using non-linear finite-element analysis and existing experimental data. The work aim was to examine the potential of using steel fibres to reduce the amount of conventional transverse steel reinforcement without compromising ductility and strength requirements set out in design codes. To achieve this, the spacing between shear links was increased while steel fibres were added as a substitute. Parametric studies were subsequently carried out and comparisons were also made with BS EN 1992-1-1 predictions. It was concluded that the addition of steel fibres enhanced the load-carrying capacity and also altered the failure mode from a brittle shear mode to a flexural ductile one. The provision of fibres also improved ductility. However, interestingly it was found that adding excessive amounts of fibres led to a less-ductile response. Overall, the study confirmed the potential for fibres to compensate for a reduction in conventional shear reinforcement.

Neuroendocrinology of cooperation: the role of neuropeptides on the modulation of mutualistic behaviour of the Indo-Pacific Cleaner Wrasse (Labroides dimidiatus)

Tese de doutoramento, Ciências do Mar, da Terra e do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method

Component joining is typically performed by welding, fastening, or adhesive-bonding. For bonded aerospace applications, adhesives must withstand high-temperatures (200°C or above, depending on the application), which implies their mechanical characterization under identical conditions. The extended finite element method (XFEM) is an enhancement of the finite element method (FEM) that can be used for the strength prediction of bonded structures. This work proposes and validates damage laws for a thin layer of an epoxy adhesive at room temperature (RT), 100, 150, and 200°C using the XFEM. The fracture toughness (G Ic ) and maximum load ( ); in pure tensile loading were defined by testing double-cantilever beam (DCB) and bulk tensile specimens, respectively, which permitted building the damage laws for each temperature. The bulk test results revealed that decreased gradually with the temperature. On the other hand, the value of G Ic of the adhesive, extracted from the DCB data, was shown to be relatively insensitive to temperature up to the glass transition temperature (T g ), while above T g (at 200°C) a great reduction took place. The output of the DCB numerical simulations for the various temperatures showed a good agreement with the experimental results, which validated the obtained data for strength prediction of bonded joints in tension. By the obtained results, the XFEM proved to be an alternative for the accurate strength prediction of bonded structures.

Dynamical behaviour of multi-particle large-scale systems

Collective behaviours can be observed in both natural and man-made systems composed of a large number of elemental subsystems. Typically, each elemental subsystem has its own dynamics but, whenever interaction between individuals occurs, the individual behaviours tend to be relaxed, and collective behaviours emerge. In this paper, the collective behaviour of a large-scale system composed of several coupled elemental particles is analysed. The dynamics of the particles are governed by the same type of equations but having different parameter values and initial conditions. Coupling between particles is based on statistical feedback, which means that each particle is affected by the average behaviour of its neighbours. It is shown that the global system may unveil several types of collective behaviours, corresponding to partial synchronisation, characterised by the existence of several clusters of synchronised subsystems, and global synchronisation between particles, where all the elemental particles synchronise completely.

Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs

This work addresses both experimental and numerical analyses regarding the tensile behaviour of CFRP single-strap repairs. Two fundamental geometrical parameters were studied: overlap length and patch thickness. The numerical model used ABAQUS® software and a developed cohesive mixed-mode damage model adequate for ductile adhesives, and implemented within interface finite elements. Stress analyses and strength predictions were carried out. Experimental and numerical comparisons were performed on failure modes, failure load and equivalent stiffness of the repair. Good correlation was found between experimental and numerical results, showing that the proposed model can be successfully applied to bonded joints or repairs.

Micro-abrasion wear behaviour of TiAlCrSiN nanostructured coatings

The injection process of glass fibres reinforced plastics promotes the moulds surface degradation by erosion. In order to improve its wear resistance, several kinds of PVD thin hard coatings were used. It is well-known that nanostructures present a better compromise between hardness and toughness. Indeed, when the coating is constituted by a large number of ultra-thin different layers, cracks and interface troubles tend to decrease. However, it is not clear that these nanostructures present a better wear behaviour in erosion processes. In order to study its wear behaviour, a sputtered PVD nanostructured TiAlCrSiN coating was used. The substrate and film surfaces topography were analyzed by profilometry and atomic force microscopy techniques. Film adhesion to the substrate was evaluated by scratch tests. The surface hardness was measured with a Vickers micro-hardness tester. The wear resistance was evaluated by micro-abrasion with a rotating ball tribometer tests. Slurry of SiC particles in distilled water was used in order to provoke the surface abrasion. Different duration tests were performed in order to analyze the wear evolution. After these tests, the wear mechanisms developed were analyzed by scanning electron microscopy. Wear craters were measured and the wear rate was calculated and discussed. With the same purpose, coated inserts were mounted in an injection mould working with a 30% glass fibres reinforced polypropylene. After 45 000 cycles no relevant wear was registered.

Access and information behaviour of European Documentation Centres users in Portugal and Spain: a comparative study

The aim of this study was to undertake a comparative analysis of the practices and information behaviour of European information users who visit information units specialising in European information in Portugal and Spain. The study used a quantitative methodology based on a questionnaire containing closed questions and one open question. The questions covered the general sociological profile of the respondents and their use of European Document Centres, in addition to analysing aspects associated with information behaviour relating to European themes. The study therefore examined data on the preferred means and sources for accessing European information, types of documents and the subjects investigated most. The use of European databases and the Internet to access material on Europe was also studied, together with the reasons which users considered made it easy or difficult to access European information, and the aspects they valued most in accessing this information. The questionnaire was administered in European Document Centres in 2008 and 2010.

Analysis of the feeding behaviour of the mosquito Culex pipiens L. (Diptera: Culicidae) in relation to West Nile virus

The goal ofthis literature review is to inform the reader on several aspects of West Nile Virus (WNV) transmission by its mosquito vector, Culex pipiens and to elucidate how Cx. pipiens and WNV are intertwined. The first few sections of the literature review describe the life cycle and blood feeding behaviours ofmosquitoes so that baseline data ofmosquito biology are established. In addition to explaining how and why a mosquito blood feeds, the section on "Blood Meal Analysis" describes the different methods for determining the vertebrate source of mosquito blood meals and a brief history of these testing methods. Since this thesis looks at the feeding behaviour of Cx. pipiens, it is important to know how to determine what they are feeding upon. Discussion on other mosquito-borne diseases related to WNV gives a broader perspective to the thesis, and examines other diseases that have occurred in Ontario in the past. This is followed by background information on WNV and theories on how this virus came to North America and how it relates to Cx. pipiens. The final sections discuss Cx. pipiens and give background information to how this species of mosquito exists and behaves within North America.

Effectiveness of life skills training on the total behaviour of six individuals in a job preparation program

In the first week of a Job preparation Program all twelve female members of the class were invited to be part of a study to determine the effect of Life Skills training on their behaviour over the twelve-week period of the program. Six females volunteered and each was interviewed four times during the Job preparation Program and once after the program ended. The interviews focused on three areas of skill deficiency addressed in Life Skills lessons: their knowledge about themselves and attitude towards themselves; their interpersonal relationships; and their problem-solving ability. The participants' comments over the sixteen-week period of the interviews were used to decide if the total behaviour of the participants, (i.e., what they did, thought, and felt) changed so that each became more effective in satisfying her needs. The study suggested that the total behaviour of three of the six women changed so that they became more effective in satisfying their needs. The fourth female's total behaviour changed in only two of the three areas focused on in the interviews, and the total behaviour of the fifth and sixth females showed no change.

School choice behaviour of independent school parents

One hundred and thirty-three parents of students new ~o ~ive independent schools in Ontario wer. surveyed to inve~tigate school choice behaviour. Paren~s were asKed to indicate their reasons for changing schooling, ~he criteria for selection o~ a school and the nature of the search process. Parents were also asKed to ranK speci~ic precipitants for change and criteria for choice. Spearman RanK Correla.tion tests were run comparing precipitants for change and criteria for choice for the entire sample and sub-groups based on socioeconomic status, gender of the child and family size. No signl~icant differences were found between the various $ub-groups, however, there was a strong positive correlation between precipitants for change and criteria for choice.Chi sq,uare tests were run compa.ring the number of information sources utilized in the search process, and a comparison was made between the importance of the va.rious sources of information. The majority of parents were classified as ac~ive searchers, researching one alternative more carefully than others. Socioeconomic status was the only factor to have a sign ific:ant- effect on the ranKing of information sources.

A naturalistic observation of the play behaviour of children with autism spectrum disorders /

Cognitive and social levels of play engaged in by four-to-eight-year-old children with autism spectrum disorders were examined in naturalistic classroom settings. In addition, play at home was compared with play at school via parent and educator interviews. Seventeen school-age children, their educators and caregivers participated in the study. The most frequently observed play behaviours included parallel-functional play, adult interactions and solitary-functional play. The play of the children in the current study was consistent with that of typically-developing preschoolers. Mothers and educators did not differ significantly in their perspectives of the participants' play behaviours. In general, educators' and caregivers' reports were positively related to researcher observations of participants' play behaviours. Methodological considerations and practical implications for the findings are discussed.

Gas chromatographic electron capture negative ionization mass spectrometric (GC/ECNI/MS) determination of unique fluorinated compounds in the sediments of Lake Ontario and the effect of high-boiling alcohols (as injection solvents) on chromatographic behaviour of polycyclic aromatic hydrocarbons in gas chromatography

Part I - Fluorinated Compounds A method has been developed for the extraction, concentration, and determination of two unique fluorinated compounds from the sediments of Lake Ontario. These compounds originated from a common industrial landfill, and have been carried to Lake Ontario by the Niagara River. Sediment samples from the Mississauga basin of Lake Ontario have been evaluated for these compounds and a depositional trend was established. The sediments were extracted by accelerated solvent extraction (ASE) and then underwent clean-up, fractionation, solvent exchange, and were concentrated by reduction under nitrogen gas. The concentrated extracts were analyzed by gas chromatography - electron capture negative ionization - mass spectrometry. The depositional profile determined here is reflective of the operation of the landfill and shows that these compounds are still found at concentrations well above background levels. These increased levels have been attributed to physical disturbances of previously deposited contaminated sediments, and probable continued leaching from the dumpsite. Part II - Polycyclic Aromatic Hydrocarbons Gas chromatography/mass spectrometry is the most common method for the determination of polycyclic aromatic hydrocarbons (PAHs) from various matrices. Mass discrimination of high-boiling compounds in gas chromatographic methods is well known. The use of high-boiling injection solvents shows substantial increase in the response of late-eluting peaks. These solvents have an increased efficiently in the transfer of solutes from the injector to the analytical column. The effect of I-butanol, I-pentanol, cyclopentanol, I-hexanol, toluene and n-octane, as injection solvents, was studied. Higher-boiling solvents yield increased response for all PAHs. I -Hexanol is the best solvent, in terms of P AH response, but in this solvent P AHs were more susceptible to chromatographic problems such as peak splitting and tailing. Toluene was found to be the most forgiving solvent in terms of peak symmetry and response. It offered the smallest discrepancies in response, and symmetry over a wide range of initial column temperatures.

Characterizing the impact of multiple potential enemies (predators and parasites) on the behaviour of ranid tadpoles

In order to fully understand an organism's behaviours the interactions between multiple enemies or selective pressures need to be considered, as these interactions are usually far more complex than the simple addition of their effects in isolation. In this thesis, I consider the impact of multiple enemies (fish predators and parasites) on the behaviour of three larval anurans (Lithobates sylvaticus, L. clamitans and L. catesbeianus). I also determine whether species that differ in life-histories and habitat preferences possess different antipredator mechanisms and how this affects species responses to multiple enemies. I show that the three Ranid larvae respond differently to the trade-off imposed by the presence of both fish predators and trematode parasites within the environment. The two more permanent pond breeders (L. clamitans and L. catesbeianus) increased activity when in the combined presence of predators and parasites. In contrast, the temporary pond breeder (L. sylvaticus) decreased activity in the combined presence of predator and parasites, in the same manner as they responded to fish alone. Further, the presence of fish along with parasites increased the susceptibility of both L. sylvaticus and L. clamitans to trematode infection, whereas parasite infection in L. catesbeianus was unaffected by the presence of fish. A second experiment to assess palatability of the three anuran species to fish, revealed a range of palatabilities, with L. catesbeianus being least palatable, L. clamitans being somewhat unpalatable, and L. sylvaticus being highly palatable. This result helps to explain the species differences in tthe observed behaviour to the combined presence of fish and parasites. In conclusion, the results from this study highlight the importance of considering multiple selective pressures faced by organisms and how this shapes their behaviour.

The Ligand and Membrane-binding Behaviour of the Phosphatidylinositol Transfer Proteins (PITPa & PITPb)

Human Class I phosphatidylinositol transfer proteins (PITPs) exists in two forms: PITPα and PITPβ. PITPs are believed to be lipid transfer proteins based on their capacity to transfer either phosphatidylinositol (PI) or phosphatidylcholine (PC) between membrane compartments in vitro. In Drosophila, the PITP domain is found to be part of a multi-domain protein named retinal degeneration B (RdgBα). The PITP domain of RdgBα shares 40 % sequence identity with PITPα and has been shown to possess PI and PC binding and transfer activity. The detailed molecular mechanism of ligand transfer by the human PITPs and the Drosophila PITP domain remains to be fully established. Here, we investigated the membrane interactions of these proteins using dual polarization interferometry (DPI). DPI is a technique that measures protein binding affinity to a flat immobilized lipid bilayer. In addition, we also measured how quickly these proteins transfer their ligands to lipid vesicles using a fluorescence resonance energy transfer (FRET)-based assay. DPI investigations suggest that PITPβ had a two-fold higher affinity for membranes compared to PITPα. This was reflected by a four-fold faster ligand transfer rate for PITPβ in comparison to PITPα as determined by the FRET assay. Interestingly, DPI analysis also demonstrated that PI-bound human PITPs have lower membrane affinity compared to PC-bound PITPs. In addition, the FRET studies demonstrated the significance of membrane curvature in the ligand transfer rate of PITPs. The ligand transfer rate was higher when the accepting vesicles were highly curved. Furthermore, when the accepting vesicles contained phosphatidic acid (PA) which have smaller head groups, the transfer rate increased. In contrast, when the accepting vesicles contained phosphoinositides which have larger head groups, the transfer rate was diminished. However, PI, the favorite ligand of PITPs, or the presence of anionic lipids did not appear to influence the ligand transfer rate of PITPs. Both DPI and FRET examinations revealed that the PITP domain of RdgBα was able to bind to membranes. However, the RdgBα PITP domain appears to be a poor binder and transporter of PC.