Antioxidant activity of Knipholone anthrone

Knipholone (KP) and knipholone anthrone (KA) are natural 4-phenylanthraquinone structural analogues with established differential biological activities including in vitro antioxidant and cytotoxic properties. By using DNA damage as an experimental model, the comparative Cu(II)-dependent prooxidant action of these two compounds were studied. In the presence of Cu(II) ions, the antioxidant KA (3.1-200 microM) but not KP (6-384 microM) caused a concentration-dependent pBR322 plasmid DNA strand scission. The DNA damage induced by KA could be abolished by reactive oxygen species scavengers, glutathione and catalase as well as EDTA and a specific Cu(I) chelator bathocuproine disulfonic acid. In addition to Cu(II) chelating activity, KA readily reduces Cu(II) to Cu(I). Copper-dependent generation of reactive oxygen species and the subsequent macromolecular damage may be involved in the antimicrobial and cytotoxic activity of KA.

Antioxidant and cytoprotective activity of leaves of Peltiphyllum peltatum (Torr.) Engl.

The antioxidant potential of fresh leaves of Peltiphyllum peltatum (Torr.) Engl. (Saxfragaceae) was analysed by measuring scavenging potential against l,l'-diphenyl-2-picrylhydrazyl (DPPH center dot) and hydroxyl radicals (W), reducing power, inhibition of lipid peroxidation and protection of cultured cells from a lethal dose of hydrogen peroxide (H2O2). In all chemical assays used, the crude ethanolic extract of leaves of P. peltatum, which contained 21.8 +/- 1.7% (w/w, n = 3) of total phenols, was as effective as the standard antioxidant compound, rutin. Fractionation of the crude extract with solvent of increasing polarity (namely, petroleum ether, chloroform, ethyl acetate, butanol and water) led to identification of the active fractions (ethyl acetate and butanol fractions). The crude extract and its active fractions, but not rutin, protected cultured RAW 264.7 macrophages from a lethal dose Of H2O2.

Epilobium parviflorum Schreb. - in vitro study of biological action

Epilobium parviflorum Schreb. (Onagraceae) is used for the treatment of benign prostatic hyperplasia (BPH), which is regarded as an endocrine disorder caused by age-related hormone imbalance and increased oxidative damage [1,2,3]. Epilobium can moderate the obstructive and the irritative symptoms of BPH [1] but its biological action is not entirely identified. E. parviflorum is rich in phytosterols, flavonoids (myricetin, quercetin, kaempferol and their glycosides), phenolic acids, catechins, ellagi- and gallotannins [4]. The potential biological effects of Epilobium parviflorum Schreb. have been investigated, in respect to its antioxidant, anti-inflammatory, enzyme-inhibitory and anti-androgenic effect. The whole-plant water extract showed higher antioxidant effect (IC50=1.65±0.05µg/mL) in DPPH assay than Trolox or ascorbic acid and inhibited the lipid peroxidation examined in TBA assay (IC50=2.31±0.18mg/mL). In concentrations 0.20-15.00µg/mL the extract possessed a protective effect comparable to catalase enzyme (2500 IU/mL), against oxidative damage generated on fibroblast cells. The examination of the COX-inhibitory effect showed that E. parviflorum had an anti-inflammatory effect (IC50=1.38±0.08µg/mL). Investigation of steroid receptor binding ability and the aromatase enzyme-inhibition showed negative results in the concentration range examined.

Start-up and running forces on bulk solids feeders: experimental findings versus available models

Many different models have been postulated over the years for sizing of feeder drives; these models have different bases, some rationally based and others more rule-of-thumb. Experience of Jenike & Johanson and likewise of The Wolfson Centre in trouble-shooting feeder drives has shown that drive powers are often poorly matched, so there is clearly still some way to go towards establishing a universally-used reliable approach. This paper presents an on-going programme of work designed to measure feeder forces experimentally on a purpose designed testing rig, and to compare these against some of the best known available models, and also against a full size installation. One aspect which is novel is the monitoring of the transition between the “filling stress field” load on the feeder and the “flowing stress field” load.

Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers

There are two major types of erosion testing devices that are used throughout the world for quantifying particle impact erosion against a solid surface. The first of these uses pressurised air to accelerate abrasive particles through a nozzle so that they impinge upon a target specimen. The second adopts a rotating disc to accelerate abrasive particles using the centripetal effect so that they impinge upon a series of targets arranged around the periphery of the disc. This paper reports the findings of a collaborative project that was designed to compare the performance and results obtained from a rig of each of the two types mentioned above. The sand blast type rig was provided by The Department of Powder Science Technology (POSTEC) at The Telemark Technological Research and Development Centre (TEL-TEK), Porsgrunn, Norway while the centripetal effect accelerator was provided by The Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich, London, UK. The test programme included tests against a wide range of materials that are commonly used in pneumatic handling facilities. (Pneumatic handling is a means of conveying and transporting powders and granular solid materials in bulk in industrial process plant, through pipelines using a gas as the carrier medium.) Olivine sand was used as the abrasive and it was projected against the test specimens at velocities and concentrations commensurate with those seen in pneumatic conveyors. In all instances the materials used in the test programme were taken from the same batch so that scatter of experimental results due to specimen variation was minimised. The paper contains a series of recommendations for erosion testing equipment. A discussion based on the results and their applicability to the prediction of wear in pneumatic conveyors concludes the paper.

The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow

In this paper the dependence of the power consumption of pneumatic conveyors upon conveyed materials, pipeline route and bore, and mode of flow has been examined. The findings are that, with different materials and modes of flow, not only is the amount of power consumed very different but it varies in different ways with pipe bore and routing. Additionally it has been found that, for any given conveying system, the choice of air mover also has a strong influence on the power requirement.

Priority questions to shape the marine and coastal policy research agenda in the United Kingdom

United Kingdom (UK) and European Union policy is rapidly developing to meet international targets for the sustainable use and protection of the marine environment. To inform this process, research needs to keep pace with these changes and research questions must be focused on providing robust scientific evidence. Thirty four priority research questions within six broad themes were identified by delegates who attended the 1st marine and coastal policy Forum, hosted by the Centre for Marine and Coastal Policy Research at Plymouth University in June 2011. The priority questions formed through this research are timely and reflect the pace and change of marine policy in the UK in response to international, European and national policy drivers. Within the data theme, the majority of questions seek to find improved procedures to manage and use data effectively. Questions related to governance focus on how existing policies should be implemented. The marine conservation questions focus entirely upon implementation and monitoring of existing policy. Questions related to ecosystem services focus on research to support the conceptual links between ecosystem services, ecosystem function, and marine management. Questions relating to marine citizenship are fundamental questions about the nature of societal engagement with the sea. Finally, the marine planning questions focus upon understanding the general approaches to be taken to marine planning rather than its detailed implementation. The questions that have emerged from this process vary in scale, approach and focus. They identify the interdisciplinary science that is currently needed to enable the UK to work towards delivering its European and international commitments to achieve the sustainable use and protection of the marine environment

Spanish Sociology and Anti-Semitism Between passed prejudice and key to civilization

There is a significant lack of sociological research in Spain about anti-Semitism. At the same time there are alarming anti-Semitic tendencies and anti-Jewish stereotypes which are above the European average. This article aims to explain this lack of sociological research about anti-Semitism in Spain. Therefore two types of explications are offered: on the one hand side some structural problems will be shown which sociology in general had since its beginnings and which complicate the understanding of anti-Semitism. Furthermore explications regarding the specific social and historic situation in Spain and of Spanish sociology in particular will be exposed. It will be shown that for its rationalistic character and with the exception of very few authors – who are considered marginalized for practical research – sociology in general has had enormous problems in understanding anti-Semitism. The specific historic situation, Francoism, the dispute about the historic memory and the delayed institutionalisation of sociology could also explain the lack of sociological interest in the topic especially in Spain. The article shows that the study of anti-Semitism is not only relevant for struggling against this burden of society in many of its variants. Furthermore, thinking about anti-Semitism can help sociology to recognise its own epistemological problems. It can serve to criticise and improve instruments of sociological research by showing the limitations of the sociological approach and to uncover the importance of interdisciplinary research for understanding specific social phenomena. In that sense, anti-Semitism, far from being a marginal subject, can be considered a key topic in the process of civilisation and it can help us to decipher the contemporary Spanish society.

La incidencia de los valores culturales en el voluntariado: el caso de Europa

La realidad del voluntariado es sumamente compleja hasta el punto de que resulta complicado definir y caracterizar el trabajo voluntario, dada la gran variedad de interpretaciones, motivaciones, variables sociodemográficas y aspectos culturales que configuran el perfil de los voluntarios. El objetivo de este trabajo es analizar la influencia conjunta de algunas variables sociodemográficas, así como de los valores culturales de índole secular o tradicional, sobre el perfil de los voluntarios en Europa. Además, se investiga qué variables orientan a los voluntarios hacia un determinado tipo de voluntariado u otro. Para ello se ha aplicado principalmente una metodología de regresión logística a partir de la información disponible en la European Value Study. Los resultados obtenidos ayudan a establecer una caracterización del voluntariado en Europa, y confirman la influencia de los valores culturales, en primer lugar, en la realización o no de trabajos de voluntariado, y en segundo lugar, en la elección que hacen estas personas del tipo de actividad con la que están comprometidos. Al analizar dos tipos de voluntariado de motivación supuestamente muy diferente, se concluye que existe un grupo de valores que influyen en ambos, aunque el sentido y la intensidad en la que lo hacen sea diferente; por otra parte, algunos valores tienen influencia o no en la realización de trabajos de voluntariado, dependiendo del tipo específico al que nos refiramos.