Development of Self-Cleaning Box Culvert Design – Phase II, TR-619, 2013

Culverts are common means to convey flow through the roadway system for small streams. In general, larger flows and road embankment heights entail the use of multibarrel culverts (a.k.a. multi-box) culverts. Box culverts are generally designed to handle events with a 50-year return period, and therefore convey considerably lower flows much of the time. While there are no issues with conveying high flows, many multi-box culverts in Iowa pose a significant problem related to sedimentation. The highly erosive Iowa soils can easily lead to the situation that some of the barrels can silt-in early after their construction, becoming partially filled with sediment in few years. Silting can reduce considerably the capacity of the culvert to handle larger flow events. Phase I of this Iowa Highway Research Board project (TR-545) led to an innovative solution for preventing sedimentation. The solution was comprehensively investigated through laboratory experiments and numerical modeling aimed at screening design alternatives and testing their hydraulic and sediment conveyance performance. Following this study phase, the Technical Advisory Committee suggested to implement the recommended sediment mitigation design to a field site. The site selected for implementation was a 3-box culvert crossing Willow Creek on IA Hwy 1W in Iowa City. The culvert was constructed in 1981 and the first cleanup was needed in 2000. Phase II of the TR 545 entailed the monitoring of the site with and without the selfcleaning sedimentation structure in place (similarly with the study conducted in laboratory). The first monitoring stage (Sept 2010 to December 2012) was aimed at providing a baseline for the operation of the as-designed culvert. In order to support Phase II research, a cleanup of the IA Hwy 1W culvert was conducted in September 2011. Subsequently, a monitoring program was initiated to document the sedimentation produced by individual and multiple storms propagating through the culvert. The first two years of monitoring showed inception of the sedimentation in the first spring following the cleanup. Sedimentation continued to increase throughout the monitoring program following the depositional patterns observed in the laboratory tests and those documented in the pre-cleaning surveys. The second part of Phase II of the study was aimed at monitoring the constructed self-cleaning structure. Since its construction in December 2012, the culvert site was continuously monitored through systematic observations. The evidence garnered in this phase of the study demonstrates the good performance of the self-cleaning structure in mitigating the sediment deposition at culverts. Besides their beneficial role in sediment mitigation, the designed self-cleaning structures maintain a clean and clear area upstream the culvert, keep a healthy flow through the central barrel offering hydraulic and aquatic habitat similar with that in the undisturbed stream reaches upstream and downstream the culvert. It can be concluded that the proposed self-cleaning structural solution “streamlines” the area upstream the culvert in a way that secures the safety of the culvert structure at high flows while producing much less disturbance in the stream behavior compared with the current constructive approaches.

Concept Highway Maintenance Vehicle, Final Report, Phase Two, 1998

This report documents Phase II activities of a potentially four-phase project. The goal of the project is to study the feasibility of using advanced technologies from other industries to improve the efficiency and safety of winter highway maintenance vehicle operations. State departments of transportation from Iowa, Minnesota, and Michigan initially formed the study consortium, and several private vendors have become project partners. The Center for Transportation Research and Education (CTRE) at Iowa State University is managing project tasks

Comparison of the developmental effects of two mercury compounds on glial cells and neurons in aggregate cultures of rat telencephalon.

A three-dimensional cell culture system was used as a model to study the influence of low levels of mercury in the developing brain. Aggregating cell cultures of fetal rat telencephalon were treated for 10 days either during an early developmental period (i.e., between days 5 and 15 in vitro) or during a phase of advanced maturation (i.e., between days 25 and 35) with mercury. An inorganic (HgCl2) and an organic mercury compound (monomethylmercury chloride, MeHgCl) were examined. By monitoring changes in cell type-specific enzymes activities, the concentration-dependent toxicity of the compounds was determined. In immature cultures, a general cytotoxicity was observed at 10(-6) M for both mercury compounds. In these cultures, HgCl2 appeared somewhat more toxic than MeHgCl. However, no appreciable demethylation of MeHgCl could be detected, indicating similar toxic potencies for both mercury compounds. In highly differentiated cultures, by contrast, MeHgCl exhibited a higher toxic potency than HgCl2. In addition, at 10(-6) M, MeHgCl showed pronounced neuron-specific toxicity. Below the cytotoxic concentrations, distinct glia-specific reactions could be observed with both mercury compounds. An increase in the immunoreactivity for glial fibrillary acidic protein, typical for gliosis, could be observed at concentrations between 10(-9) M and 10(-7) M in immature cultures, and between 10(-8) M and 3 x 10(-5) M in highly differentiated cultures. A conspicuous increase in the number and clustering of GSI-B4 lectin-binding cells, indicating a microglial response, was found at concentrations between 10(-10) M and 10(-7) M. These development-dependent and cell type-specific effects may reflect the pathogenic potential of long-term exposure to subclinical doses of mercury.

Evaluation of the Confirmation Light System at Signalized Intersections in Medium to Large Iowa Communities to Reduce Red Light Running Violations”, TR-657, 2015

Red light running continues to be a serious safety concern for many communities in the United States. The Federal Highway Administration reported that in 2011, red light running accounted for 676 fatalities nationwide. Red light running crashes at a signalized intersections are more serious, especially in high speed corridors where speeds are above 35 mph. Many communities have invested in red light countermeasures including low-cost strategies (e.g. signal backplates, targeted enforcement, signal timing adjustments and improvement with signage) to high-cost strategies (e.g. automated enforcement and intersection geometric improvements). This research study investigated intersection confirmation lights as a low-cost strategy to reduce red light running violations. Two intersections in Altoona and Waterloo, Iowa were equipped with confirmation lights which targeted the through and left turning movements. Confirmation lights enable a single police officer to monitor a specific lane of traffic downstream of the intersection. A before-after analysis was conducted in which a change in red light running violations prior to- and 1 and 3 months after installation were evaluated. A test of proportions was used to determine if the change in red light running violation rates were statistically significant at the 90 and 95 percent levels of confidence. The two treatment intersections were then compared to the changes of red light running violation rates at spillover intersections (directly adjacent to the treatment intersections) and control intersections. The results of the analysis indicated a 10 percent reduction of red light running violations in Altoona and a 299 percent increase in Waterloo at the treatment locations. Finally, the research team investigated the time into red for each observed red light running violation. The analysis indicated that many of the violations occurred less than one second into the red phase and that most of the violation occurred during or shortly after the all-red phase.

Measurement of the mechanical power of walking by satellite positioning system (GPS).

PURPOSE: This descriptive article illustrates the application of Global Positioning System (GPS) professional receivers in the field of locomotion studies. The technological challenge was to assess the external mechanical work in outdoor walking. METHODS: Five subjects walked five times during 5 min on an athletic track at different imposed stride frequency (from 70-130 steps x min(-1)). A differential GPS system (carrier phase analysis) measured the variation of the position of the trunk at 5 Hz. A portable indirect calorimeter recorded breath-by-breath energy expenditure. RESULTS: For a walking speed of 1.05 +/- 0.11 m x s(-1), the vertical lift of the trunk (43 +/- 14 mm) induced a power of 46.0 +/- 20.4 W. The average speed variation per step (0.15 +/- 0.03 m x s(-1)) produced a kinetic power of 16.9 +/- 7.2 W. As compared with commonly admitted values, the energy exchange (recovery) between the two energy components was low (39.1 +/- 10.0%), which induced an overestimated mechanical power (38.9 +/- 18.3 W or 0.60 W x kg(-1) body mass) and a high net mechanical efficiency (26.9 +/- 5.8%). CONCLUSION: We assumed that the cause of the overestimation was an unwanted oscillation of the GPS antenna. It is concluded that GPS (in phase mode) is now able to record small body movements during human locomotion, and constitutes a promising tool for gait analysis of outdoor unrestrained walking. However, the design of the receiver and the antenna must be adapted to human experiments and a thorough validation study remains to be conducted.

MOLECULAR MECHANISMS OF A ROOT SYSTEM TO SOIL ADAPTATION

Contrairement aux animaux, les plantes sont des organismes sessiles qui ne possèdent pas de mécanismes de fuite quand les conditions environnementales ne sont plus optimales. Les plantes sont physiquement ancrées à l'endroit où elles ont germées et aux conditions environnementales qui parfois peuvent être extrêmes. Les possibilités d'acclimatation de différentes espèces, parfois même de groupes de plantes au sein d'une même espèce, peuvent varier mais repose sur une adaptation génétique de la plante. L'adaptation est un long processus qui repose sur l'apparition spontanée de mutations génétiques, leur mise à l'épreuve face aux conditions environnementales, et dans le cas où la mutation a un impact positif sur la survie dans cet habitat particulier, elle sera maintenue dans une population donnée de plantes. De telles populations, appelées écotypes, sont le matériel de départ pour la découverte de gènes qui induisent un bénéfice pour la plante dans un environnement donné. La plante la plus étudiée en biologie moléculaire est Arabidopsis thaliana, l'arabette des prés. Dans une étude précédente, les racines d'écotypes naturels d'Arabidopsis ont été comparées et un écotype, Uk-1, avait le système racinaire le plus particulier. Cet écotype possède des racines beaucoup plus courtes et plus ramifiées que tous les autres écotypes. Des analyses plus poussées ont montré qu'une seule mutation dans un gène était la cause de ce phénotype, le gène BREVIS RADIX (BRX), mot latin signifiant 'racine courte'. Bien que l'on connaisse le gène BRX, on connaît finalement peu de choses sur son importance adaptative. Dans cette étude, nous avons montré que la mutation dans le gène BRX rend la plante plus résistante aux sols acides. Dans l'optique de mieux comprendre cette valeur adaptative du mutant brx, nous avons analysé dans quels tissus le gène BRX jouait un rôle important. Nous avons pu mettre en évidence que BRX est important pour le développement du protophloème. Le protophloème est un élément du système vasculaire de la plante. En général, les plantes supérieures possèdent deux systèmes de transport à longue distance. L'un d'eux, appelé xylème, transporte l'eau et les nutriments absorbés du sol par les racines vers les feuilles. Les feuilles sont le siège du processus de photosynthèse au cours duquel sont produits des sucres qui devront être distribués partout dans les autres parties de la plante. Le tissu cellulaire chargé de livrer les produits de la photosynthèse, ainsi que les régulateurs de croissance, est le phloème. Ce dernier regroupe le métaphloème et le protophloème. Le protophloème est essentiel pour la livraison des sucres synthétisés ainsi que des signaux de croissance aux pointes des racines, centres organogéniques responsables de la production de nouvelles cellules durant la phase de croissance de la racine. La structure du protophloème peut être décrite comme des tubes continus, vides et résistants, faits de cellules spécialisées qui permettent un transport efficace et rapide. Nous avons montré que dans les mutants brx ces canaux de transports sont discontinus car certaines cellules n'ont pas terminé leur cycle de différenciation. Ces cellules obstruent le conduit ce qui fait que les sucres et les signaux de croissance, comme l'auxine, ne peuvent plus être transportés aux méristèmes. En conséquence, la prolifération de l'activité des méristèmes est compromise, ce qui explique les racines courtes. Au lieu d'être délivré aux méristèmes, l'auxine se concentre en amont des méristèmes où cela provoque l'apparition de nouvelles racines branchées et, très probablement, l'activation des pompes à protons. Sur des sols acides, la concentration en ion H+ est très élevée. Ces ions entrent dans les cellules de la racine par diffusion et perturbent notablement la croissance des racines et de la plante en général. Si les cellules de la racine possédaient des pompes à protons hyperactives, elles seraient capable d'évacuer le surplus d'ions H+ en dehors de la cellule, ce qui leur assurerait de meilleures chances de survie sur sols acides. De fait, le mutant brx est capable d'acidifier le milieu de culture dans lequel il est cultivé plus efficacement que la plante sauvage. Ce mutant est également capable de donner plus de progéniture sur ce type de milieu de croissance que les plantes sauvages. Finalement, nous avons trouvé d'autres mutants brx en milieu naturel poussant sur sols acides, ce qui suggère fortement que la mutation du gène BRX est une des causes de l'adaptation aux sols acides. -- Plants as sessile organisms have developed different mechanisms to cope with the complex environmental conditions in which they live. Adaptation is the process through which traits evolve by natural selection to functionally improve in a given environmental context. An adaptation to the environment is characterized by the genetic changes in the entire populations that have been fixed by natural selection over many generations. BREVIS RADIX (BRX) gene was found through natural Arabidopsis accessions screen and was characterized as a root growth regulator since loss-of-function mutants exhibit arrested post-embryonic primary root growth in addition to a more branched root system. Although brx loss-of-function causes a complete alteration in root architecture, BRX activity is only required in the root vasculature, in particular in protophloem cell file. Protophloem is a part of the phloem transport network and is responsible for delivery of photo-assimilates and growth regulators, coming from the shoot through mature phloem component - metaphloem, to the all plant primary meristems. In order to perform its function, protophloem is the first cell file to differentiate within the root meristem. During this process, protophloem cells undergo a partial programmed cell death, during which they build a thicker cell wall, degrade nucleus and tonoplast while plasma membrane stays functional. Interestingly, protophloem cells enter elongation process only after differentiation into sieve elements is completed. Here we show that brx mutants fail to differentiate protophloem cell file properly, a phenotype that can be distinguished by a presence of a "gap" cells, non-differentiated cells between two flanking differentiated cells. Discontinuity of protophloem differentiation in brx mutants is considered to be a consequence of local hyperactivity of CLAVATA3/EMBRYO SURROUNDING REGION 45 (CLE45) - BARELY ANY MERISTEM 3 (BAM3) signaling module. Interestingly, a CLE45 activity, most probably at the level of receptor binding, can be modulated by apoplastic pH. Altogether, our results imply that the activity of proton pumps, expressed in non-differentiated cells of protophloem, must be maintained under certain threshold, otherwise CLE45-BAM3 signaling pathway will be stimulated and in turn protophloem will not differentiate. Based on vacuolar morphology, a premature cell wall acidification in brx mutants stochastically prevents the protophloem differentiation. Only after protophloem differentiates, proton pumps can be activated in order to acidify apoplast and to support enucleated protophloem multifold elongation driven by surrounding cells growth. Finally, the protophloem differentiation failure would result in an auxin "traffic jam" in the upper parts of the root, created from the phloem-transported auxin that cannot be efficiently delivered to the meristem. Physiologically, auxin "leakage" from the plant vasculature network could have various consequences, since auxin is involved in the regulation of almost every aspect of plant growth and development. Thus, given that auxin stimulates lateral roots initiation and growth, this scenario explains more branched brx root system. Nevertheless, auxin is considered to activate plasma membrane proton pumps. Along with this, it has been shown that brx mutants acidify media much more than the wild type plants do, a trait that was proposed as an adaptive feature of naturally occurring brx null alleles in Arabidopsis populations found on acidic soils. Additionally, in our study we found that most of accessions originally collected from acidic sampling sites exhibit hypersensitivity to CLE45 treatment. This implies that adaptation of plants to acidic soil involves a positive selection pressure against upstream negative regulators of CLE45-BAM3 signaling, such as BRX. Perspective analysis of these accessions would provide more profound understanding of molecular mechanisms underlying plant adaptation to acidic soils. All these results are suggesting that targeting of the factors that affect protophloem differentiation is a good strategy of natural selection to change the root architecture and to develop an adaptation to a certain environment. -- Les plantes comme organismes sessiles ont développé différents mécanismes pour s'adapter aux conditions environnementales complexes dans lesquelles elles vivent. L'adaptation est le processus par lequel des traits vont évoluer via la sélection naturelle vers une amélioration fonctionnelle dans un contexte environnemental donné. Une adaptation à l'environnement est caractérisée par des changements génétiques dans des populations entières qui ont été fixés par la sélection naturelle sur plusieurs générations. Le gène BREVIS RADIX (BRX) a été identifié dans le crible d'une collection d'accessions naturelles d'Arabidopsis et a été caractérisé comme un régulateur de la croissance racinaire étant donné que le mutant perte-de-fonction montre une croissance racinaire primaire arrêtée au stade post-embryonnaire et présente de plus un système racinaire plus ramifié que la plante sauvage. Bien que le mutant perte-de-fonction brx cause une altération complète de l'architecture racinaire, l'activité de BRX n'est requise que dans la vascularisation racinaire, en particulier au niveau du protophloème. Le protophloème est un composant du réseau de transport du phloème et est responsable du transit des dérivés de la photosynthèse ainsi que des régulateurs de croissances, venant de la partie aérienne par le phloème mature (métaphloème) vers tous les méristèmes primaires de la plante. Pour pouvoir réaliser sa fonction, le protophloème est la première file de cellules à se différencier à l'intérieur du méristème de la racine. Pendant ce processus, les cellules du protophloème subissent une mort cellulaire programmée partielle durant laquelle elles épaississent leur paroi cellulaire, dégradent le noyau et le tonoplaste tandis que la membrane plasmique demeure fonctionnelle. De manière intéressante, les cellules du protophloème entament le processus d'allongement seulement après que la différenciation en tubes criblés soit complète. Ce travail montre que le mutant brx est incapable de mener à bien la différenciation de la file de cellules du protophloème, phénotype qui peut être visualisé par la présence de cellules 'trous', de cellules non différenciées entourées de deux cellules différenciées. La discontinuité de la différenciation du phloème dans le mutant brx est considérée comme la conséquence de l'hyperactivité localisée du module de signalisation CLA VA TA3/EMBRYO SURROUNDING REGION 45 (CLE45) - BARELY ANY MERISTEM 3 (BAM3). De manière intéressante, l'activité de CLE45, très probablement au niveau de la liaison avec le récepteur, peut être modulé par le pH apoplastique. Pris ensemble, nos résultats impliquent que l'activité des pompes à protons, actives dans les cellules non différenciées du protophloème, doit être maintenue en dessous d'un certain seuil autrement la cascade de signalisation CLE45-BAM3 serait stimulée, en conséquence de quoi le protophloème ne pourrait se différencier. D'après la morphologie vacuolaire, une acidification prématurée de la paroi cellulaire dans le mutant brx empêche la différenciation du protophloème de manière stochastique. Une fois que le protophloème se différencie, les pompes à protons peuvent alors être activées afin d'acidifier l'apoplaste et ainsi faciliter l'allongement des cellules énuclées du protophloème, entraînées par la croissance des cellules environnantes. Finalement, la différenciation défectueuse du protophloème produit une accumulation d'auxine dans la partie supérieure de la racine car le phloème ne peut plus acheminer efficacement l'auxine au méristème. Physiologiquement, la 'fuite' d'auxine à partir du réseau vasculaire de la plante peut avoir des conséquences variées puisque l'auxine est impliquée dans la régulation de la majorité des aspects de la croissance et développement de la plante. Etant donné que l'auxine stimule l'initiation et développement des racines latérales, ce scénario pourrait expliquer le système racinaire plus ramifié du mutant brx. En plus, l'auxine est considérée comme un activateur des pompes à protons. Par ailleurs, nous avons montré que les mutants brx ont la capacité d'acidifier le milieu plus efficacement que les plantes sauvages, une caractéristique des populations sauvages <¥Arabidopsis poussant sur des sols acides et contenant les allèles délétés brx. De plus, dans nos résultats nous avons mis en évidence que la plupart des accessions collectées originellement sur des sites acidophiles montre une hypersensibilité au traitement par CLE45. Ceci implique que l'adaptation des plantes aux sols acides repose sur la pression de sélection positive à rencontre des régulateurs négatifs de CLE45- BAM3, situés en amont de la cascade, tel le produit du gène BRX. Les analyses de ces accessions pourraient aboutir à une meilleure compréhension des mécanismes moléculaires responsables de l'adaptation des plantes aux sols acides. Tous nos résultats suggèrent que le ciblage des facteurs affectant la différenciation du protophloème serait une stratégie gagnante dans la sélection naturelle pour changer l'architecture de la racine et ainsi s'adapter efficacement à un nouvel environnement.

Development of In Situ Detection Methods for Materials-Related Distress (MRD) in Concrete Pavements: Phase 2, HR-1081, 2005

This project utilized information from ground penetrating radar (GPR) and visual inspection via the pavement profile scanner (PPS) in proof-of-concept trials. GPR tests were carried out on a variety of portland cement concrete pavements and laboratory concrete specimens. Results indicated that the higher frequency GPR antennas were capable of detecting subsurface distress in two of the three pavement sites investigated. However, the GPR systems failed to detect distress in one pavement site that exhibited extensive cracking. Laboratory experiments indicated that moisture conditions in the cracked pavement probably explain the failure. Accurate surveys need to account for moisture in the pavement slab. Importantly, however, once the pavement site exhibits severe surface cracking, there is little need for GPR, which is primarily used to detect distress that is not observed visually. Two visual inspections were also conducted for this study by personnel from Mandli Communications, Inc., and the Iowa Department of Transportation (DOT). The surveys were conducted using an Iowa DOT video log van that Mandli had fitted with additional equipment. The first survey was an extended demonstration of the PPS system. The second survey utilized the PPS with a downward imaging system that provided high-resolution pavement images. Experimental difficulties occurred during both studies; however, enough information was extracted to consider both surveys successful in identifying pavement surface distress. The results obtained from both GPR testing and visual inspections were helpful in identifying sites that exhibited materials-related distress, and both were considered to have passed the proof-of-concept trials. However, neither method can currently diagnose materials-related distress. Both techniques only detected the symptoms of materials-related distress; the actual diagnosis still relied on coring and subsequent petrographic examination. Both technologies are currently in rapid development, and the limitations may be overcome as the technologies advance and mature.

A new drug delivery system inhibits uveitis in an animal model after cataract surgery.

Cataract surgery is a common ocular surgical procedure consisting in the implantation of an artificial intraocular lens (IOL) to replace the ageing, dystrophic or damaged natural one. The management of postoperative ocular inflammation is a major challenge especially in the context of pre-existing uveitis. The association of the implanted IOL with a drug delivery system (DDS) allows the prolonged intraocular release of anti-inflammatory agents after surgery. Thus IOL-DDS represents an "all in one" strategy that simultaneously addresses both cataract and inflammation issues. Polymeric DDS loaded with two model anti-inflammatory drugs (triamcinolone acetonide (TA) and cyclosporine A (CsA)) were manufactured in a novel way and tested regarding their efficiency for the management of intraocular inflammation during the 3 months following surgery. The study involved an experimentally induced uveitis in rabbits. Experimental results showed that medicated DDS efficiently reduced ocular inflammation (decrease of protein concentration in aqueous humour, inflammatory cells in aqueous humour and clinical score). Additionally, more than 60% of the loading dose remained in the DDS at the end of the experiment, suggesting that the system could potentially cover longer inflammatory episodes. Thus, IOL-DDS were demonstrated to inhibit intraocular inflammation for at least 3 months after cataract surgery, representing a potential novel approach to cataract surgery in eyes with pre-existing uveitis.

Planning, Developing, and Implementing the Iowa Pavement Marking Management System (IPMMS): Phases I and II, 2006

With an annual pavement marking program of approximately $2 million and another $750 thousand invested in maintenance of durable markings each year, the Iowa DOT is seeking every opportunity to provide all-year markings staying in acceptable condition under all weather conditions. The goal of this study is to analyze existing pavement marking practices and to develop a prototype Pavement Marking Management System (PMMS). This report documents the first two phases of a three-phase research project. Phase I includes an overview of the Iowa DOT’s existing practices and a literature review regarding pavement marking practices in other states. Based on this information, a work plan was developed for Phases II and III of this study. Phase II organized the key components necessary to develop a prototype PMMS for the Iowa DOT. The two primary components are (1) performance/life cycle curves for pavement marking products, and (2) an application matrix tailored to the pavement marking products and roadway and environmental conditions faced by the Iowa DOT. Both components will continue to be refined and tailored to Iowa materials and conditions as more performance data becomes available.

Field Evaluation of Compaction Monitoring Technology: Phase I, 2004

This Phase I report describes a preliminary evaluation of a new compaction monitoring system developed by Caterpillar, Inc. (CAT), for use as a quality control and quality assurance (QC/QA) tool during earthwork construction operations. The CAT compaction monitoring system consists of an instrumented roller with sensors to monitor machine power output in response to changes in soil machine interaction and is fitted with a global positioning system (GPS) to monitor roller location in real time. Three pilot tests were conducted using CAT’s compaction monitoring technology. Two of the sites were located in Peoria, Illinois, at the Caterpillar facilities. The third project was an actual earthwork grading project in West Des Moines, Iowa. Typical construction operations for all tests included the following steps: (1) aerate/till existing soil; (2) moisture condition soil with water truck (if too dry); (3) remix; (4) blade to level surface; and (5) compact soil using the CAT CP-533E roller instrumented with the compaction monitoring sensors and display screen. Test strips varied in loose lift thickness, water content, and length. The results of the study show that it is possible to evaluate soil compaction with relatively good accuracy using machine energy as an indicator, with the advantage of 100% coverage with results in real time. Additional field trials are necessary, however, to expand the range of correlations to other soil types, different roller configurations, roller speeds, lift thicknesses, and water contents. Further, with increased use of this technology, new QC/QA guidelines will need to be developed with a framework in statistical analysis. Results from Phase I revealed that the CAT compaction monitoring method has a high level of promise for use as a QC/QA tool but that additional testing is necessary in order to prove its validity under a wide range of field conditions. The Phase II work plan involves establishing a Technical Advisor Committee, developing a better understanding of the algorithms used, performing further testing in a controlled environment, testing on project sites in the Midwest, and developing QC/QA procedures.

On-line desorption of dried blood spots coupled to hydrophilic interaction/reversed-phase LC/MS/MS system for the simultaneous analysis of drugs and their polar metabolites.

An assay for the simultaneous analysis of pharmaceutical compounds and their metabolites from micro-whole blood samples (i.e. 5 microL) was developed using an on-line dried blood spot (on-line DBS) device coupled with hydrophilic interaction/reversed-phase (HILIC/RP) LC/MS/MS. Filter paper is directly integrated to the LC device using a homemade inox desorption cell. Without any sample pretreatment, analytes are desorbed from the paper towards an automated system of valves linking a zwitterionic-HILIC column to an RP C18 column. In the same run, the polar fraction is separated by the zwitterionic-HILIC column while the non-polar fraction is eluted on the RP C18. Both fractions are detected by IT-MS operating in full scan mode for the survey scan and in product ion mode for the dependant scan using an ESI source. The procedure was evaluated by the simultaneous qualitative analysis of four probes and their relative phase I and II metabolites spiked in whole blood. In addition, the method was successfully applied to the in vivo monitoring of buprenorphine metabolism after the administration of an intraperitoneal injection of 30 mg/kg on adult female Wistar rat.

GIS-Based Accident Location and Analysis System (GIS-ALAS) Project Report: Phase 1, 1998

This report summarizes progress made in Phase 1 of the GIS-based Accident Location and Analysis System (GIS-ALAS) project. The GIS-ALAS project builds on several longstanding efforts by the Iowa Department of Transportation (DOT), law enforcement agencies, Iowa State University, and several other entities to create a locationally-referenced highway accident database for Iowa. Most notable of these efforts is the Iowa DOT’s development of a PC-based accident location and analysis system (PC-ALAS), a system that has been well received by users since it was introduced in 1989. With its pull-down menu structure, PC-ALAS is more portable and user-friendly than its mainframe predecessor. Users can obtain accident statistics for locations during specified time periods. Searches may be refined to identify accidents of specific types or involving drivers with certain characteristics. Output can be viewed on a computer screen, sent to a file, or printed using pre-defined formats.

Concurrent or sequential adjuvant letrozole and radiotherapy after conservative surgery for early-stage breast cancer (CO-HO-RT): a phase 2 randomised trial.

BACKGROUND: Letrozole radiosensitises breast cancer cells in vitro. In clinical settings, no data exist for the combination of letrozole and radiotherapy. We assessed concurrent and sequential radiotherapy and letrozole in the adjuvant setting. METHODS: This phase 2 randomised trial was undertaken in two centres in France and one in Switzerland between Jan 12, 2005, and Feb 21, 2007. 150 postmenopausal women with early-stage breast cancer were randomly assigned after conserving surgery to either concurrent radiotherapy and letrozole (n=75) or sequential radiotherapy and letrozole (n=75). Randomisation was open label with a minimisation technique, stratified by investigational centres, chemotherapy (yes vs no), radiation boost (yes vs no), and value of radiation-induced lymphocyte apoptosis (< or = 16% vs >16%). Whole breast was irradiated to a total dose of 50 Gy in 25 fractions over 5 weeks. In the case of supraclavicular and internal mammary node irradiation, the dose was 44-50 Gy. Letrozole was administered orally once daily at a dose of 2.5 mg for 5 years (beginning 3 weeks pre-radiotherapy in the concomitant group, and 3 weeks post-radiotherapy in the sequential group). The primary endpoint was the occurrence of acute (during and within 6 weeks of radiotherapy) and late (within 2 years) radiation-induced grade 2 or worse toxic effects of the skin. Analyses were by intention to treat. This study is registered with ClinicalTrials.gov, number NCT00208273. FINDINGS: All patients were analysed apart from one in the concurrent group who withdrew consent before any treatment. During radiotherapy and within the first 12 weeks after radiotherapy, 31 patients in the concurrent group and 31 in the sequential group had any grade 2 or worse skin-related toxicity. The most common skin-related adverse event was dermatitis: four patients in the concurrent group and six in the sequential group had grade 3 acute skin dermatitis during radiotherapy. At a median follow-up of 26 months (range 3-40), two patients in each group had grade 2 or worse late effects (both radiation-induced subcutaneous fibrosis). INTERPRETATION: Letrozole can be safely delivered shortly after surgery and concomitantly with radiotherapy. Long-term follow-up is needed to investigate cardiac side-effects and cancer-specific outcomes. FUNDING: Novartis Oncology France.

Functional independence within the self-memory system: new insights from two cases of developmental amnesia.

Neuropsychological and neuroimaging data suggest that the self-memory system can be fractionated into three functionally independent systems processing personal information at several levels of abstraction, including episodic memories of one's life (episodic autobiographical memory, EAM), semantic knowledge of facts about one's life (semantic autobiographical memory, SAM), and semantic knowledge of one's personality [conceptual self, (CS)]. Through the study of two developmental amnesic patients suffering of neonatal brain injuries, we explored how the different facets of the self-memory system develop when growing up with bilateral hippocampal atrophy. Neuropsychological evaluations showed that both of them suffered from dramatic episodic learning disability with no sense of recollection (Remember/Know procedure), whereas their semantic abilities differed, being completely preserved (Valentine) or not (Jocelyn). Magnetic resonance imaging, including quantitative volumetric measurements of the hippocampus and adjacent (entorhinal, perirhinal, and temporopolar) cortex, showed severe bilateral atrophy of the hippocampus in both patients, with additional atrophy of adjacent cortex in Jocelyn. Exploration of EAM and SAM according to lifetime periods covering the entire lifespan (TEMPAu task, Piolino et al., 2009) showed that both patients had marked impairments in EAM, as they lacked specificity, details and sense of recollection, whereas SAM was completely normal in Valentine, but impaired in Jocelyn. Finally, measures of patients' CS (Tennessee Self-Concept Scale, Fitts and Warren, 1996), checked by their mothers, were generally within normal range, but both patients showed a more positive self-concept than healthy controls. These two new cases support a modular account of the medial-temporal lobe with episodic memory and recollection depending on the hippocampus, and semantic memory and familiarity on adjacent cortices. Furthermore, they highlight developmental episodic and semantic functional independence within the self-memory system suggesting that SAM and CS may be acquired without episodic memories.

Development of a simulation tool for torsional vibration of branched power transmission system

In this master's thesis a mechanical model that is driven with variable speed synchronous machine was developed. The developed mechanical model simulates the mechanics of power transmission and its torsional vibrations. The mechanical model was developed for the need of the branched mechanics of a rolling mill and the propulsion system of a tanker. First, the scope of the thesis was to clarify the concepts connected to the mechanical model. The clarified concepts are the variable speed drive, the mechanics of power transmission and the vibrationsin the power transmission. Next, the mechanical model with straight shaft line and twelve moments of inertia that existed in the beginning was developed to be branched considering the case of parallel machines and the case of parallel rolls. Additionally, the model was expanded for the need of moreaccurate simulation to up to thirty moments of inertia. The model was also enhanced to enable three phase short circuit situation of the simulated machine. After that the mechanical model was validated by comparing the results of the developed simulation tool to results of other simulation tools. The compared results are the natural frequencies and mode shapes of torsional vibration, the response of the load torque step and the stress in the mechanical system occurred by the permutation of the magnetic field that is arisen from the three phase short circuit situation. The comparisons were accomplished well and the mechanical model was validated for the compared cases. Further development to be made is to develop the load torque to be time-dependent and to install two frequency converters and two FEM modeled machines to be simulated parallel.