Degradación de efluentes de las industrias del cuero y textil mediante procesos fotocatalíticos heterogéneos empleando la luz solar. Degradation of effluents from the leather and textile industries through heterogeneous photocatalytic processes using sunlight.

El creciente desarrollo de la industria del cuero y textil en nuestro país, y específicamente en la provincia de Córdoba, ha hecho resurgir en los ultimos años una problemática aún no resuelta que es la elevada contaminación de los recursos hídricos. En ambas industrias, la operación de teñido involucra principalmente colorantes de tipo azoico los cuales son "no biodegradables" y se fragmentan liberando aminas aromáticas cancerígenas. Para abordar esta problemática, la fotocatálisis heterogénea aparece como una nueva tecnología que permitiría la completa mineralización de estos colorantes. A través de radiación y un fotocatalizador sólido adecuado se pueden generan radicales libres eficientes para la oxidación de materia orgánica (colorantes) en medio acuoso. En este sentido, se proponen tamices moleculares mesoporosos modificados con metales de transición (MT) como fotocatalizadores potencialmente aptos para la degradación de estos contaminantes. El propósito principal de este proyecto es el diseño, síntesis, caracterización y evaluación de materiales mesoporosos que presenten actividad fotocatalítica ya sea mediante la modificación de su estructura con diversos metales fotosensibles y/o empleándolos como soporte de óxido de titanio. Se pretende evaluar estos materiales en la degradación de colorantes intentando desplazar su fotosensibilidad hacia la radiación visible para desarrollar nuevas tecnologías con menor impacto ambiental y mayor aprovechamiento de la energía solar. Para ello se sintetizarán materiales del tipo MCM-41 modificados con distintos MT tales como Fe, Cr, Co, Ni y Zn mediante incorporación directa del ión metálico o impregnación. Al mismo tiempo, tanto estos últimos materiales como el MCM-41 silíceo serán empleados como soporte de TiO2. Sus propiedades fisicoquímicas se caracterizarán mediante distintas técnicas instrumentales y su actividad fotocatalítica se evaluará en la degradación de colorantes azoicos bajo radiación visible. Se seleccionará el catalizador más eficiente y se estudiarán los diversos factores que afectan el proceso de fotodegradación. Así mismo, el análisis de la concentración del colorante y los productos presentes en el medio en función del tiempo de reacción permitirá inferir sobre la cinética de la decoloración y postular posibles mecanismos de fotodegradación. Con esta propuesta se espera contribuír al desarrollo de un sector industrial importante en nuestra provincia como es el de las industrias del cuero y textil, mediante la generación de nuevas tecnologías que empleen la energía solar para la degradación de sus efluentes (colorantes). En este sentido, se espera desarrollar nuevos materiales optimizados para lograr la mayor eficiencia fotocatalítica. Esto conduciría entonces hacia la remediación de un problema ambiental de alto impacto tanto para nuestra provincia y nuestro país como para la población mundial, como es la contaminación de los recursos hídricos. Finalmente, con este proyecto se contribuirá a la formación de dos doctorandos y un maestrando, cuyos temas de tesis están vinculados con nuestro objeto de estudio. The increasing development of the textile and leather industries in our country, and specifically in Córdoba, has revived an unresolved problem that is the high contamination of water resources. In both industries, the dyeing involves mainly type azoic dyes which are not biodegradable and break releasing carcinogenic aromatic amines. Heterogeneous photocatalysis appears as a new technology that would allow the complete mineralization of these pollutants. Through radiation and a suitable solid it is possible to generate free radicals for efficient oxidation of organic matter (dyes) in aqueous medium. In this respect, mesoporous molecular sieves modified with transition metals are proposed as potential photocatalysts. The main purpose of this project is the synthesis of mesoporous materials having photocatalytic activity for the degradation of dyes. We will try to move their photosensitivity to visible radiation to develop new technologies with lower environmental impact and greater use of solar energy. Materials MCM-41 modified with metals (Fe, Cr, Co, Ni and Zn) will be synthesized by direct incorporation or impregnation. These materials and the siliceous MCM-41 will be then employed as support of TiO2. The materials will be evaluated in the photocatalytic degradation of azoic dyes under visible radiation. The influence of different factors on the photodegradation proccess will be studied. Kinetic studies will be carried out and a possible reaction way will be proposed. Thus, this work will contribute to the advancement of an important industrial sector and the remediation of an environmental problem with high impact for our province and our country. Moreover, this proyect will contribute to the development of two doctoral tesis and one magister tesis which are vinculated with our study subject.

Investigation into the potential for establishing a self-sustainable wetland ecosystem over pyritic mine tailings

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.

Microdeterminação do arsênico

Studying the application of those methods of microanalysis which avoid costly instalations and atempting to combine high precision with low cost, the author recomends a new method consisting of the following : a) exposure of a surface of 530.66 mm2 of Zn to the action of the acid. b) instalation of 3 series of HgBr2 paper in test tubes with an internal diameter of respectively 3,5 and 9 mm. c - mouting between two slides, covering the margins (with parafin etc.) with parafin in order to conserve the results of the determination without change due to the action of light or moisture. d) the results can be compared at a level of 0.00001 mgr. A203 or 0.000007575 mgr. As.

Nitrificação e aproveitamento de alguns adubos nitrogenados

The rate of nitrification of several nitrogenous fertilizers (ammonium sulfate, nitre-chalk, ureia, and cottonseed meal) was studied in three soils, namely, "terra roxa legítima", a red soil derived from basalt, "terra roxa misturada", a soil also derived from basalt but with a higher proportion of sand, and "areito Corumbataí", a sandy soil. The effects of the following treatments on nitrification were considered: addition of limestone of micronutrients (Fe, Cu, Zn, Mn, and Mo), and inoculation with a suspension of spores of Aspergillus wentii, a heterotrophic nitrifier. The results showed that: in "terra roxa legítima" limestone had no influence on the nitrification rate, whereas the micronutrients estimulated the oxidation of nitre-chalk, cottonseed meal and urea; inoculation with A. wentii helped only the nitrification of ammonium sulfate and of the cottonseed meal; the latter, in all the treatments employed gave use to a smaller amount of nitrates; in "terra roxa misturada", all the fertilizers depending upon the treatments they were subjected to, presented maximum values for nitrification; limestone estimulated the oxidation of ammonium sulfate as well as the mineralization of the cottonseed meal; the addition of micronutrients helped the nitrification of all the fertilizers, except that of urea; inoculation showed a benefical influence on the nitrification of ammonium sulfate and cottonseed meal; in "arenito de Corumbatai", the amounts of nitrates produced was roughly the same for all the fertilizers investigated; limestone estimulated the nitrification of nitro-chalk, ammonium sulfate and cottonseed meal whilst the addition of micronutrients benefited only the latter two; the inoculation with A. wentii helped the oxidation of all the fertilizers. In order to study the availability of the various fertilizers above discussed, two plant growing experiments were carried cut, one in pots, using the three soil types and another one in the field, with "terra roxa misturada". In "arenito de Corumbatai" there was no significant difference in the yield both of straw and rice grains for none of the fertilizers: Chilean nitrate of soda was used as a control; ho marked agreement could be detected between the data concerning nitrification and the yield results. In "terra roxa legítima", ammonium sulfate won the competition and there was a good parallelism between nitrification and yield. In "terra roxa misturada", there was no statistical difference among the various fertilizers; the agreement between nitrification and yields was reasonable. In the field (corn), Chilean nitrate, ammonium sulfate and nitro-chalk were clearly beter than urea and cottonseed meal which did not differ from the minus nitrogen plots.

Estudos sobre a alimentação mineral do cafeeiro: VI Efeitos das deficiências de micronutrientes em Coffea arabica L. var. Mundo Novo cultivado em solução nutritiva

Young coffee plants (Coffea arabica L., var. Mundo Novo) were grown in nutrient solution purified from micronutrients contaminants by the method of MUNNS & JOHNSON (1960). All plants, except those in the control treatment, wer given all macronutrients and all micronutrients except one which was omitted in order to induce its shortage. Symptoms of deficiency were obtained for all known micronutrients but chlorine. Measurements, observations and chemical analysis of leaves allowed the following main conclusions to be drawn. 1. The relative influence of micronutrients in growth-measured by the fresh weight of the entire plant - was as follows: -Fe -Zn -Cu -Mo -Mn complete = -B = -CI. that is: the omission of iron from the nutrient solution caused the severest reduction in growth; lack of B and Cl had no effect. 2. Symptoms of deficiency of B, Fe, Mn, and Zn were found to be in good agreement with those in the literature. Effects of Cu and Mo shortage, however, had not been described so far: In the case of the Cu-deficient plants, the younger leaves were distorted, having an "S" shape, due probably to lack of growth of the veins; they lost their green color and developed rather large, necrotic patches near the margins. When molybdenum was omitted from the nutrient solution yellow spots develop near the margen of subterminal (fully mature) leaves; they became necrotic; there was a characteristic downward curling of the leaf blade along the mid rib so that the opposite edges touched each other underneath. 3. The levels of micronutrients found in normal and deficient leaves are given in Table 4. It is hoped that those values will serve as a basis of judgement of micronutrient contents found in leaves of field grown plants.

Estudos sôbre alimentação mineral do cafeeiro: VIII. Estudo da absorção e da translocação do radiozinco no cafeeiro (Coffea arabica L.)

WATER-CULTURE EXPERIMENTS. Two water-culture experiments were carried out to study the absorption and the translocation of radiozinc in young coffee plants as influenced by two factors, namely, concentration of heavy metals (iron, man ganese, copper and molybdenum) and method of application. Inert zinc was supplied at an uniform rate of 0. 05 p. p. m.; the levels of iron supply were 0, 1.0, and 10.0 p. p.m.; manganese was supplied in three doses 0, 0.5, and 5.0 p. p.m.; copper- 0, 0. 02, and 0. 2 p. p. m.; molybdenum- 0, 0. 01, and 0. 1 p. p. m. When applied to the nutrient solution the activity os the radiozinc (as zinc chloride) was 0. 15 microcuries per plant. In the study of the leaf absorption, Zn65 was supplied at the level of 0. 10 microcuries per plant; in this case the radioative material was brushed either on the lower or on the upper surface or both two pairs of mature leaves. The absorption period was 8 weeks. The radioactivity assay showed the following results: 1 - Among the heavy metals herein investigated the iron concentration did not affect the uptake of the radiozinc; by raising the level of Mn, Cu and Mo ten times, the absorption dropped to 50 per cent and even more when compared with the control plants; when, however, these micronutrients were omitted from the nutrient solution, an increase in the uptake of zinc was registered in the minus Cu treatment only. The effects of high levels of Mn, Cu and Mo probably indicate an interionic competition for a same site on a common binding substance in the cell surface. 2 - The absorption of the radiozinc directly applied to the leaf surface reached levels as high as 8 times that registered when the root uptake took place. Among the three methods of application which have been tried, brushing the lower surface of the leaves proved to be the most effective; this result is easily understood since the stomatal openings of the coffee leaves an preferentially located in the lower surface - in this treatment, about 40 per cent of the activity was absorved and around 12 per cent were translocated either to the old or to the newer organs. Chemical analyses for heavy metals, were carried out only in the plants received Zn65Cl2 in the nutrient solution; the results were as follows; 1 - Control plants had, per 1,000 gm, of dry weight the following amounts in mg.: Zn- 48 in the roots and 29 in the tops; Fe- 165 in the roots and 9 in the tops; Mn- 58 in the roots and 15 in the tops, Cu- 15 in the roots and 1. 2 in the tops; Mo- 2. 8 in the roots and 0. 45 in the tops. 2 - The effect of different levels of micronutrients in the composition of the plants can be summarized as follows: Fe and Zn- when omitted from the nutrient solution, the iron and zinc contents in the roots decreased, no variation being noted in the tops; the higher dosis caused an accumulation in the roots but no apparent effect in the tops; Mn- by omitting this micronutrient a decrease in its content in the roots was noted, where as the concentration in the tops was the same; Mo- no variation in roots and tops contents when molybdenum was omitted; higher dosis of manganese and molybdenum increased the amounts formed both in the roots and in the tops. 3 - The influence of the different concentrations of micronutrients heavy metals on the zinc content of the coffee plants can be described by saying that: Fe and Mo- no marked variation; Mn- no effect when omitted, reduced amount when the high dosis was supplied; Mn- when the plants did not receive manganese the zinc content in roots and tops was the same as in the control plants; a decrease in the zinc content of the total plant occurred when the high dosis was employed; Cu -the situation is similar to that described for manganese. Hence, results showed by the chemical analyses roughly correspond to those of the radioactivity assay; the use of the tracer technique, however, gave best informations along this line. SOIL-POTS EXPERIMENTS. The two types of soils which when selected support the most extensive coffee plantations in the State of São Paulo, Brazil: "arenito de Bauru", a light sandy soil and "terra roxa legitima", a red soil derived from basalt. Besides NPK containing salts, the coffee plants were given two doses of inert zinc (65 and 130 mg ZnCl2 per pot) and radiozinc at a total activity of 10(6) counts/minute. The results of the countings can be summarized as follows: 1 - When plants were grown in "arenito de Bauru" the activity absorbed as per cent of the total activity supplied was not affected by the dosis of inert zinc. The highest value found was around 0. 1 per cent. 2 - For the "terra roxa" plants, the situation is almost the same; there was, however, a slight increase in the absorption of the radiozinc when 130 mgm of ZnClg2 was given: a little above 0. 2 per cent of the activity supplied was absorbed. The results clearly show that the young coffee plants practically did not absorb none of the zinc supplied; two reasons at least could be pointed out to explain such a fact: 1 - Zinc fixation by an exchange with magnesium or by filling holes in the octahedral layer of aluminosilicates, probably kaolinite; 2 - No need for fertilizer zinc in the particular stage of life cycle under which the experiment was set up. The data from chemical analysis are roughly parallel to the above mentioned. When one attempts to compare - by taking data herein reported zinc uptake from nutrient solution, leaf brushing or from fertilizers in the soil, a practical conclusion can be drawn: the control of zinc deficiency in coffee plants should not be done by adding the zinc salts to the soil; in other words: the soil applications used so extensively in other countries seem not to be suitable for our conditions; hence zinc sprays should be used wherever necessary.

A separação do Cálcio de Estroncio mediante o emprego de Resina Trocadora de Íons e de Estroncio Radioativo Sr-89

O presente trabalho relata os dados obtidos na separação do estrôncio do cálcio, pelo uso de uma solução de NH4- EDTA, com pH entre os valores 4,8 e 5,3, passando através de uma coluna de resina trocadora de cátions. Assim, 200 ml de uma solução a 2,5% de NH4- EDTA com pH = 4,8 e contendo 0,36 mg de estrôncio e 199,2 mg de cálcio (o que dá uma relação de 1 de Sr para 553 de Ca) foram passados através de uma coluna de 25 a 28 ml de resina trocadora de cátions Amberlite IR - 120 (H+) prèviamente preparada. O estrôncio ficou retido na coluna e o cálcio continuou na solução que passou. Depois de passar solução de NH4- EDTA com pH 5,3 e solução de HCl de 0,25 a 0,75 N, o estrôncio foi eluido com solução 3N de HCl. Como empregou-se estrôncio radioativo Sr-89, esse ion foi determinado por radiometria, para se conhecer a eficiência da separação. O cálcio foi determinado pelo método permanganométrico em solução de NH4- EDTA após a eliminação do agente quelante. Os dados obtidos mostraram que houve uma separação muito eficiente, indicada pela porcentagem de recuperação do estrôncio qu efoi de 97,7, 97,0 e 98,6% ao passo que a recuperação do cálcio foi de 100,0, 99,9 e 99,7%.

A concentração e a quantidade de micronutrientes e de alumínio no cafeeiro, Coffea arabica, L., variedade mundo novo (B.Rodr.) Choussy, aos dez anos de idade

O presente trabalho relata os dados obtidos sôbre a concentração e a quantidade de micronutrientes, boro (B), cloro (Cl), cobre (Cu), ferro (Fe), manganês (Mn), molibdênio (Mo) e zinco (Zn), no tronco, ramos, fôlhas e frutos do cafeeiro, Coffea arabica, L., variedade mundo novo (B.Rodr.) Choussy, aos dez anos de idade e crescendo em solo latosólico da Escola Superior de Agricultura "Luiz de Queiroz", em Piracicaba. Além dos micronutrientes, são apresentados dados sobre a concentração e a quantidade de alumínio, nas citadas partes do cafeeiro.

A determinação do cobre pelo método calorimétrico do dietilditiocarbamato de sódio

O trabalho em aprêço, relata o estudo de diversos aspectos do método espectrofotométrico da determinação do cobre pelo dietilditiocarbamato de sódio. Dentre os aspectos estudados, podem ser citados os seguintes: a) Reativo: influência da concentração e sua conservação em função do tempo. b) Influência da quantidade de EDTA. c) Solventes: escolha do solvente, do comprimento de onda e do filtro. d) Estabilidade do composto. e) Estudo da amplitude, exatidão e precisão do método. f) Aplicação do método, na determinação do cobre em plantas e solos.

Determinação do cálcio trocável em solos pelo método do glioxal bis (2-hidroxianil)

Neste trabalho é apresentado um estudo sobre a determinação do cálcio trocável do solo, através do método colorimétrico do glioxal bis (2-hidroxianil). São apresentados os dados referentes às curvas de absorção e a estabilidade do glioxal e do composto cálcio glioxal, a relação entre as leituras e a concentração de cálcio em soluções padrões e a interferência de diversos íons. Com base nos resultados encontrados, é proposta uma técnica para a determinação do elemento, em extratos de solo, obtidos com solução de cloreto de potássio 1 normal» sendo os interferentes mascarados com cianeto de potássio e trietanolamina. Os resultados obtidos na determinação do cálcio em oito amostras de solo do Estado de São Paulo, são comparados com aquêles encontrados através do método quelatométrico do EDTA.

A determinação de enxofre em plantas pelo método quelatométrico do BDTA

Neste trabalho são relatados estudos a respeito do método quelatométrico de determinação de sulfato, baseado na titulação do bário residual com solução de EDTA, após a precipitação do citado ânion na forma de sulfato de bário. Foram estudados aspectos relativos ao emprego de diferentes indicadores e passou-se a preconizar o uso de solução de púrpura de ftaleína a 0,2%. São descritos experimentos relativos à determinação de sulfato em soluções puras, observando-se o período de precipitação e a influência de diversos ânions. Finalmente, tendo por base os dados obtidos, é preconizada urna marcha analítica para determinação de enxôfre total e enxôfre-sulfato em material vegetal. Os resultados obtidos quando se empregou a técnica proposta na determinação de sulfato em materiais vegetais, foram comparados com aquêles fornecidos pelo método gravimétrico, baseado na pe-sagem do sulfato de bário.

Determinação do teor total e do teor solúvel, em diversas soluções, do cobre do solo

O presente trabalho tem por objetivo o estudo de métodos e técnicas de determinação do teor total e do teor solúvel, em diversas soluções extratoras, do cobre do solo, Foram utilizados cinco diferentes solos do Estado de São Paulo e as determinações foram feitas pelo método colorimétrico do dietilditiocarbamato de sódio (DDC-Na). Para a determinação do teor total de cobre, os extratos dos solos foram preparados através de ataque de 250 mg de solo com os ácidos HClO4 e HF, 0 teor de cobre total encontrado oscilou de 23 a 126 ppm, para os cinco solos estudados. Quanto ao teor de cobre solúvel, foram empregados como extratores, soluções de HCl 0,05 N e 0,10 N, de EDTA dissódico a 1% e de CH3COOH 0,10 N. As extrações com as soluções de HCl foram conduzidas por agitação de 2,5 e 5,0 g de solo por 50 ml de solução, com a duração de 10, 15 e 30 minutos. Os teores de cobre solubilizado oscilaram de 0,5 a 14,6 ppm, com HCl 0,10 N e de 0,3 a 10,2 ppm, com HCl 0,05 N. Os extratos em soluções de EDTA dissódico e CH3COOH foram obtidos a partir de 5,0 g de solo por 50 ml de solução, agitando também 10, 15 e 30 minutos. Os teores de cobre solubilizado variaram de 0,8 a 15,0 ppm, com solução de EDTA, e de 0,0 a 0,5 ppm, com solução de CH3COOH.

Extração e determinação do teor solúvel de zinco do solo

Foram estudadas diversas soluções extratoras e várias técnicas para extração do zinco solúvel do solo. Foram utilizadas cinco amostras de solos do Estado de São Paulo e as determinações foram feitas empregando-se o método baseado na espectrofotometria de chama de absorção atômica. Para extração do zinco solúvel foram empregadas as seguintes soluções: HCl 0,05 e 0,10N; CH3COOH 0,10N; EDTA dissódico a 1%; MgCl2 0,10 e 0,50N; H2SO4 0,05 e 0,10N. As extrações com as soluções de HCl, CH3COOH, EDTA dissódico e MgCl2 , foram conduzidas por agitação de 2,5 e 5,0 g de solo com 50 ml de solução, durante 10, 15 e 30 minutos. Com as soluções de H2SO4, as extrações foram feitas apenas a partir de 5,0 g de solo para 50 ml de solução, conservando-se as demais condições. Os dados obtidos revelaram que de um modo geral as soluções de EDTA a 1%, de HC1 0,05 e 0,10N, e de H2S0(4) 0,05 e 0,10N, foram mais eficientes na extração do zinco do que as soluções de MgCl2 0,10 e 0,50N e de CH3COOH 0,10N. O tempo de agitação para extração do zinco durante 15 minutos forneceu resultados mais elevados (significativos ao nível de 5% de probabilidade) do que os obtidos com 10 minutos. No entanto a agitação durante 30 minutos apresentou resultados que não diferiram dos conseguidos com 15 minutos. A proporção de 2,5:50 (pêso da terra em gramas para volume em ml de solução extratora) apresentou resultados mais elevados, e significativos ao nível de 5%, do que os obtidos com a proporção de 5:50.

Influência de alguns compostos químicos na retenção do ácido ascórbico em frutas liofilizadas"

No presente trabalho foram estudados os efeitos do EDTA, do metabissulfito de potássio e de metabissulfito + ácido tartárico na retenção do ácido ascórbico durante a liofilização e posterior armazenamento de cereja das Antilhas e de morango. Os resultados e as análises estatísticas mostraram que todos os tratamentos foram significativamente superiores às testemunhas, observando-se também que o tratamento metabissulfito de potássio + ácido tartárico foi ligeiramente melhor que os demais tratamentos, porém não estatisticamente significativo.

Estudos sobre a alimentação mineral do algodoeiro. II. Deficiências de micronutrientes na variedade I. A. C. 11

No sentido de se obter o quadro sintomatológico da carência dos micronutrientes, assim como dados analíticos, cultivou-se em solução nutritiva purificada plantas de algodão da variedade I. A. C. 11. Foi obtido o quadro sintomatológico das carências de B, Cu, Fe, Mn, Mo e Zn. A análise química das folhas novas afetadas pelas carências apresentou os seguintes valores (ppm): B=33; Cu=4,8; Fe=238; Mn=8,7; Mo = 0,12: Zn=25,2.