Scalar field description of decaying-Lambda cosmologies

The conditions under which cosmologies driven by time-varying cosmological terms can be described by a scalar field coupled to a perfect fluid are discussed. An algorithm to reconstruct potentials dynamically and thermodynamically analogous to given phenomenological λ models is presented. As a working example, the deflationary cosmology which evolves from a pure de Sitter vacuum state to a slightly modified Friedmann-Robertson-Walker cosmology is considered. It is found that this is an example of nonsingular warm inflation with an asymptotic exponential potential. Differences with respect to other scalar field descriptions of decaying vacuum cosmologies are addressed and possible extensions are indicated.

Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of wood moisture content on modulus of elasticity on tension paralllel to the grain of brasilian species

Periodically, when necessary, standard documents are revised in order to analyze inconsistencies and to include considerations according new realities verified. In this sense, aiming to quantify the wood moisture content influence on modulus of elasticity, it was applied tension tests parallel to the grain for six specimens of different strength classes of wood, considering nominal moisture of 12, 20, 25, and 30% in Brazil. The present paper examine the adequacy of the current Brazilian standard ABNT NBR7190:1997, in review, about the adoption of a first degree equation to describe the influence of wood moisture content for timber structures design. It was obtained a new first degree equation which leads to statically equivalent estimations when compared with results by ABNT NBR7190:1997 equation. However, as recommendations it could be maintain the current expression for the next text of the referred document review, without prejudice to statistical significance of the estimates.

Evaluation of longitudinal modulus of elasticity in wood species for structural application

1024x768 This research aimed to investigate possible differences in values of longitudinal modulus of elasticity for wood species usually employed for structural purposes, as Castanheira (Bertholletia excelsa), Cambará (Erisma uncinatum), Cumaru (Dipteryx odorata), Jatobá (Hymenaea stilbocarpa), Garapa (Apuleia leiocarpa) and Peroba Rosa (Aspidosperma polyneuron), obtained from compression and tension parallel to grain, and static bending tests. Recommendations of the Brazilian standard ABNT NBR 7190:1997, Annex B, were followed. Statistical analysis results for the cited properties, had equivalent averages for the six wood species analyzed. This confirms that any of the three tests can be used to obtain the longitudinal elastic modulus and which could avoid the necessity of evaluating stiffness values for wood by more than one kind of mechanical test. Normal 0 21 false false false PT-BR X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabela normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Influence of moisture content in some mechanical properties of two brazilian tropical wood species

This study aimed, with the aid of analysis of variance (ANOVA), to investigate and quantify the influence of moisture ranging between 12% and over 30% (fiber saturation) on the mechanical properties: strength and modulus of elasticity in compression and in tension parallel to grain; modulus of rupture and modulus of elasticity in static bending; shear strength parallel to grain considering wood species Ipê (Tabebuia sp) and Angelim Araroba (Vataireopsis araroba). Tests were performed according to the assumptions and calculating methods Brazilian standard ABNT NBR 7190, Anexx B, totalizing 400 tests. Results of ANOVA revealed a significant reduction (16% on average) for mechanical properties wood due to the increase in moisture content from 12% to over 30% (fiber saturation). The same behavior also occurred when assembly containing the two species was considered.

Influence of the number of load cycles to obtain the stiffness properties of angico preto (Anadenanthera macrocarpa) wood specie

The tests used to obtain the stiffness properties of wood are made with two loading cycles, as defined by the Brazilian standard ABNT NBR 7190 (Design of Timber Structures). However, the possibility of reducing the number of cycles allows decrease the operating time of the machine, resulting in reduced spending on electricity used during the tests. This research aimed to investigate, with the aid of the analysis of variance (ANOVA), the influence of the use of three load cycles to obtain the modulus of elasticity in compression parallel to grain (Ec0), in tensile parallel to the grain (Et0), in bending (Em) and in compression perpendicular to the grain (Ec90) of Angico Preto (Anadenanthera macrocarpa) wood specie. For the number of cycles and stiffness were manufactured 12 samples, totaling 144 specimens. The results of the ANOVA revealed statistical equivalence between the stiffness properties for both load cycle numbers evaluated, indicating that it is possible to carry out the tests with a single charge cycle, allowing savings in time and energy in the operation of the equipment.

Poissons ratios for wood species for structural purposes

The broader knowledge about physical and mechanical properties of wood allows reliable timber structures design. Even little addressed in the literature, in several situations Poisson's ratios are required for the evaluation of stresses acting on structural elements. This study aimed to obtain values of Poisson's ratios (ν), plans Longitudinal-Radial (νLR) and Longitudinal-Tangential (νLT), for species Peroba Rosa (Aspidosperma polyneuron) and Jatobá (Hymenaea courbaril L.). For this purpose, forty samples Peroba Rosa and eight samples of Jatobá were prepared for testing in compression parallel to the grain, following the recommendations of ABNT NBR 7190 standard. The results of means confidence intervals, considered at the level of 5% significance, revealed that the Poisson's ratios νLR e νLT to Peroba Rosa are 0.27 and 0.42, respectively, and 0.25 and 0.43 to Jatobá.

Moisture content and its influence on the roughness and noise emission during wood machining

Numerous factors influencing the surface quality of wood after machining, among them we highlight the machining parameters and the properties of the wood. In the analysis of the influence of these factors on machining and in determining the quality measurement systems are used to obtain surface characteristics, these systems are divided into methods of contact and non-contact. The method for mechanical contact performed with the aid of the surface roughness tester is the most valued in the measurement of roughness of wood, however, aiming at a greater agility in these measurements, there is a need to seek alternatives for evaluation of surface quality, and one of these options is to use the forms of indirect measurements of this quality, as for example, the use of noise emission during the machining process. With this, the aim was to analyze the influence of the moisture content of the wood, at different levels, on surface quality of the species Pinus elliottii, determined by the method of mechanical probing move and relate this roughness with the sound emission issued for each class of humidity, during machining. The planning of experiments and statistical analyses were performed with the help of Taguchi method. The specimens were conditioned in greenhouses climatizadoras automatics for obtaining three classes of humidity. Machining tests of wooden pieces were performed on a machining center specific for this type of material. The roughness values were measured by a roughness verifier and the noise emission values were measured by for a measurer sound pressure level. Statistically significant differences were observed, the significance level of 10 %, on roughness and noise emission between the three levels of moisture. It was observed that with the increase in the moisture content occurred an increase of roughness and a reduction in noise emission. Monitoring of surface quality through noise level is an interesting alternative to the method of mechanical contact.

Influência da temperatura no crescimento micelial de linhagens de Lentinula edodes

The objective of the present work was to evaluate the in vitro mycelial growth of ten L. edodes strains (LED 12, LED 20, LED 25, LED 27, LED 33, LED 35, LED 51, LED 55, LED 58 and LED 75) submitted to the temperatures of 15, 20 and 25 ºC. An agar medium prepared with eucalyptus wood extract and soy bran was used and radial measurement of the mycelial growth of L. edodes strains was performed. The experimental design was totally randomized, in a 10 x 3 factorial scheme. Each treatment corresponded to a Petri plate and consisted of 5 repetitions. It was verified that L. edodes growth is influenced by the incubation temperature, that is the temperature of 25 ºC was the most favorable for the mycelial growth of all L. edodes strains, especially for LE 75, LE 55, LE 33 and LE 12 strains, which obtained the highest mycelial growth averages at 25 ºC at the end of the cultivation cycle.

Uso de resíduos madeireiros da Amazônia brasileira no cultivo in vitro de Lentinus strigosus

Lentinus strigosus (Schwein.) Fr. is an exploitable edible mushroom occurring in the Brazilian Amazon, being part of a huge diversity of edible mushrooms which are little grown. The use of regional waste is recommended to reduce production costs of any kind of edible mushroom. Thus, the mycelial growth of L. strigosus in culture media based on regional wood waste extract by using substrates based on Protium puncticulatum, Cariniana micrantha and Caryocar glabum sawdust, supplemented with 20% of wheat bran (Triticum aestivum), corn bran (Zea sp.) or rice bran (Oryza sp.) was observed. Eucalyptus (Eucaliptus sp.) sawdust was used for comparison with the other wood wastes because it is commonly used in the cultivation of edible fungi. The experimental design employed was totally randomized, in 4 x 3 factorial scheme (sawdust x bran), adding up 12 treatments with 5 repetitions, being that each repetition corresponded to a Petri dish, totalizing 60 dishes, incubated at 35 ºC. The diameter of the colony was daily evaluated until the fungus reached the borders of the Petri dish in one of the treatments. After that period, the media based on P. puncticulatum sawdust obtained thebest results of mycelial growth, showing potential to be used as an alternative residuein a future production of L. strigosus in the state of Amazonas.

Biological control of the bronze bug, Thaumastocoris peregrinus, in eucalyptus plantations in Brazil

The bronze bug Thaumastocoris peregrinus (Hemiptera: Thaumastocoridae) was detected in Brazil in 2008 and infested >180 000 ha of eucalyptus plantations in 2011. The bronze bug can cause a reduction of 10–15% in wood productivity after 2 years of heavy infestation. Although there is not an effective control method known, biological control is the main control strategy studied. An exotic egg parasitoid, Cleruchoides noackae (Hymenoptera: Mymaridae), was imported from Australia in 2012, reared in a laboratory and released in three Brazilian regions. Parasitoids were recovered at release points after 20–30 d. In 2013, preliminary evaluations demonstrated parasitoid establishment in these areas, and the parasitoid was recovered in adjacent areas after 1 year of release. Bioassays confi rmed egg parasitism of 15–20% by C. noackae. Other native natural enemies were studied. We found green lacewing Chrysoperla externa and predatory bugs Supputius cincticeps and Atopozelus opsimus preying on nymphs and/or adults of T. peregrinus. Another promising possibility is entomopathogenic fungi. Commercial formulations of Beauveria bassiana were tested with success in lab and fi eld conditions. Fusarium proliferatum and Paecilomyces cateniannulatus caused mortality of T. peregrinus in natural epizooties. After 5 years of research, it is possible to develop an integrated pest management system (IPM) for eucalyptus plantations based on biocontrol strategy for bronze bug.

Efeitos da estabulação sobre o trato respiratório de equinos em dois tipos diferentes de camas e a pasto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Signaling via cAMP in Fungi: Interconnections with Mitogen-Activated Protein Kinase Pathways

The cAMP signal transduction pathway controls a wide variety of processes in fungi. For example, considerable progress has been made in describing the involvement of cAMP pathway components in the control of morphogenesis in Saccharomyces cerevisiae, Ustilago maydis, and Magnaporthe grisea. These morphological processes include the establishment of filamentous growth in S. cerevisiae and U. maydis, and the differentiation of an appressorial infection structure in M. grisea. The discovery that appressorium formation requires cAMP signaling provides an immediate connection to fungal virulence. This connection may have broader implications among fungal pathogens because recent work indicates that cAMP signaling controls the expression of virulence traits in the human pathogen Cryptococcus neoformans. In this fungus, cAMP also influences mating, as has been found for Schizosaccharomyces pombe and as may occur in U. maydis. Finally, cAMP and mitogen- activated protein kinase pathways appear to function coordinately to control the response of certain fungi, e.g., Saccharomyces cerevisiae and Schizosaccharomyces pombe, to environmental stress. There are clues that interconnections between these pathways may be common in the control of many fungal processes.

Marine Fungi Aspergillus sydowii and Trichoderma sp Catalyze the Hydrolysis of Benzyl Glycidyl Ether

Whole cells of the marine fungi Aspergillus sydowii Gc12, Penicillium raistrickii Ce16, P. miczynskii Gc5, and Trichoderma sp. Gc1, isolated from marine sponges of the South Atlantic Ocean (Brazil), have been screened for the enzymatic resolution of (+/-)-2-(benzyloxymethyl)oxirane (benzyl glycidyl ether; 1). Whole cells of A. sydowii Gc12 catalyzed the enzymatic hydrolysis of (R,S)-1 to yield (R)-1 with an enantiomeric excess (ee) of 24-46% and 3-(benzyloxy)propane-1,2-diol (2) with ee values < 10%. In contrast, whole cells of Trichoderma sp. Gc1 afforded (S)-1 with ee values up to 60% and yields up to 39%, together with (R)-2 in 25% yield and an ee of 32%. This is the first published example of the hydrolysis of 1 by whole cells of marine fungi isolated from the South Atlantic Ocean. The hydrolases from the two studied fungi exhibited complementary regioselectivity in opening the epoxide ring of racemic 1, with those of A. sydowii Gc12 showing an (S) preference and those of Trichoderma sp. Gc1 presenting an (R) preference for the substrate.