Peritoneal fluid changes in horses subjected to small colon distension

Intestinal devitalization in cases of small colon obstruction may be difficult to detect based only in clinical signs. The purpose was to serially evaluate blood and peritoneal fluid of horses subjected to small colon distension. Seventeen adult horses were allotted in three groups. In the small colon-distended group (DG, n=7) a surgically-implanted latex balloon was inflated to promote intraluminal small colon distension. In the shamoperated group (SG, n=5), the balloon was implanted but not inflated, and no surgery was done in the control group (CG, n=5). Blood and peritoneal fluid were sampled before and after (6 samples with a 30-minute interval) intestinal obstruction for cytological and biochemical analyses. No significant changes in clinical signs occurred within groups or across time during the experimental period. There were no statistical differences among SG and SG groups in hematologic and blood chemistry variables. Although total protein concentration and lactate dehydrogenase (LDH) activity in peritoneal fluid remained most of the time within reference values during the experimental period in all groups, increases from baseline values were detected in SG and DG groups. Such increases occurred earlier, progressively and with greater magnitude in the DG when compared with the SG (P<0.05). Increases from baselines values were also observed in total nucleated cells and neutrophils counts in the DG (P<0.05). In conclusion, distension of the equine small colon induced progressive subtle increases in total protein and LDH concentrations in the peritoneal fluid during the first hours. Serial evaluation of these variables in peritoneal fluid may be useful for early detection of intestinal devitalization in clinical cases of equine small colon obstruction.

Anti-Rickettsia spp. antibodies in free-ranging and captive capybaras from southern Brazil

Capybaras (Hydrochaeris hydrochaeris) are among the main hosts of Amblyomma spp. ticks, which is able to transmit Rickettsia species to human beings and animals. Since they are often infested with potential vector ticks, capybaras may be used as sentinels for rickettsiosis, such as the Brazilian Spotted Fever. The aim of the present study was to determine the prevalence of antibodies against Rickettsia spp. using the indirect immunofluorescence assay (IFA) in 21 free-ranging and 10 captive animals from the Zoological Park of the 'Bela Vista Biological Sanctuary' (BVBS), Itaipu Binational, Foz do Iguaçu, Southern Brazil. Antigens of six rickettsial species already identified in Brazil (Rickettsia rickettsii, R. parkeri, R. bellii, R. rhipicephali, R. amblyommii and R. felis) were used for IFA. Ticks from each capybara were collected for posterior taxonomic identification. A total of 19 (61.3%) samples reacted to at least one of tested species. Seropositivity was found in 14 (45.2%), 12 (38.7%), 5 (16.1%), 4 (12.9%), 3 (9.7%) and 3 (9.7%) animals for R. rickettsii, R. bellii, R. parkeri, R. amblyommii, R. felis and R. rhipicephali, respectively. Two captive capybaras presented suggestive titers of R. rickettsii infection and one sample showed homologous reaction to R. parkeri. Only one free-ranging capybara presented evidence R. bellii infection. Ticks collected on capybaras were identified as Amblyomma dubitatum e Amblyomma sp. Results evidenced the rickettsial circulation in the area, suggesting a potential role of capybaras on bacterial life cycle.

Avaliação imunofenotípica de subpopulações linfocitárias no sangue do cordão umbilical e periférico de suínos neonatos (Sus scrofa)

Considerando a importância do uso do sangue do cordão umbilical como fonte potencial de células tronco hematopoiéticas e o uso do suíno doméstico (Sus scrofa) como modelo para pesquisas biomédicas em medicina regenerativa, e por outro lado, visando dar um contributo sobre a quantificação das subpopulações linfocitárias no sangue do cordão umbilical e periférico, objetivou-se quantificar as células CD4+, CD5+ e CD8+ nas amostras de sangue de suínos neonatos. Analisaram-se as amostras do sangue do cordão umbilical e periférico de 48 leitões de linhagem Topigs, provenientes de porcas hígidas, inseminadas artificialmente e de parto natural. Foram coletadas amostras de sangue do cordão umbilical e periférico no momento do nascimento, por meio de venopunção da veia umbilical e seio venoso retro-oftálmico, respectivamente. As quantificações imunofenotípicas de células CD4+, CD5+ e CD8+ foram obtidas por citometria de fluxo. Os valores médios obtidos para as contagens das células CD4+, CD5+ e CD8+ do sangue do cordão umbilical e periférico apresentaram-se inferiores aos reportados para o sangue periférico de suínos adultos, sugerindo um componente imunológico imaturo. A proporção CD4+:CD8+ obtida no sangue do cordão umbilical (3,2±1,2%) e no sangue periférico (3,2±1,7%) ilustrou a predominância dos linfócitos TCD4+ com relação aos TCD8+. A quantidade relativa de células CD4+ e CD8+ no sangue do cordão umbilical e periférico foi de 1,37±0,86% e 1,15±0,57%, respectivamente.

Partial budget analysis of prepartum antimicrobial therapy and Escherichia coli J5 vaccination of dairy heifers and their effect on milk production and milk quality parameters

Abstract: This study aimed to determine whether prepartum antimicrobial and/or Escherichia coli J5 vaccination in dairy heifers influence the milk production, milk quality, and estimate their economic benefit. Thus, 33 dairy heifers were enrolled in four groups using a split-splot design. Groups were: (G1) prepartum antimicrobial infusion and vaccination with an E. coli J5 bacterin, (G2) prepartum antimicrobial infusion, (G3) vaccination with an E. coli J5 bacterin, and (G4) control heifers. Composite milk samples for somatic cell count, total bacteria count and milk composition were collected 15 days after calving and every 15 days until the end of the experiment. Bacteriological analysis was carried out at the end of study. The milk production and the incidence of clinical cases of mastitis, as well as the costs associated with them were recorded. The results demonstrate a reduction on clinical mastitis rates by preventive strategies, which implicated in lower volume of discarded milk (0.99, 1.01, 1.04 and 3.98% for G1, G2, G3 and G4, respectively) and higher economic benefit. Thus, in well-managed dairy herds the prevention of heifer mastitis by vaccination or antimicrobial therapy can reduce the amount of antimicrobials needed to treat clinical mastitis cases and the days of discarded milk.

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Wastewater Treatment and Deinking Sludge Utilization Possibilities for Energy and Material Recovery in the Leningrad Region

Operation of pulp and paper mills generates waste including wastewater treatment sludge and deinking sludge. Both sludge types are generated in large amounts and are mainly disposed of in landfills in the Leningrad Region resulting in environmental degradation. The thesis was aimed at seeking new sustainable ways of sludge utilization. Two paper mills operating in the Leningrad Region and landfilling their sludge were identified: “SCA Hygiene Products Russia” and “Knauf”. The former generates 150 t/day of deinking sludge, the latter – 145 t/day of secondary sludge. Chemical analyses of deinking sludge were performed to assess applicability of sludge in construction materials production processes. Higher heating value on dry basis of both sludge types was determined to evaluate energy potential of sludge generated in the Leningrad Region. Total energy output from sludge incineration was calculated. Deinking sludge could be utilized in the production process of “LSR-Cement” or “Slantsy Cement Plant Cesla” factories, and “Pobeda” and “Nikolsky” brick mills without exceeding current sludge management costs.

Interferência das plantas daninhas sobre algumas características agronômicas e a produtividade de sete cultivares de milho

O presente trabalho teve por objetivo estudar o comportamento de 7 cultivares de milho (Zea mays L.) quanto à interferência da comunidade de plantas daninhas. Para tanto, os 7cultivares de milho (ESALQ VF-7, ESALQ VD-8, COMPOSTOS ARQUITETURA, FLINT e DENTADO, PIRANÃO e o híbrido CARGILL 501) foram submetidos a duas condições de interferência: com e sem, totalizando 14 tratamentos arranjados em esquema fatorial (7x2), instalados, no campo, em área experimental da FCAV/UNESP, Campus de Jaboticabal, seguindo o delineamento experimental de blocos ao acaso com 4 repetições. A comunidade infestante cujas espécies mais importantes foram SIDCO, BRAPL e ELEIN, estabeleceu-se a partir dos 14 dias após a semeadura, passando a interferir negativamente sobre a cultura a partir dos 35 dias. Os cultivares CD e CF apresentaram maior crescimento que os demais. A interferência da comunidade infestante reduziu a altura de inserção da primeira espiga; o comprimento e a circunferência das espigas, os pesos da espigas e dos grãos e a produção estimada da cultura, independente do cultivar. Os cultivares PIR e ARQ, independente da interferência, mostraram-se os menos produtivos. O cultivar Carg mostrou-se o mais produtivo mesmo quando sob interferência. O cultivar ARQ foi o mais sensível à interferência, enquanto PIR e VF-7 foram os menos sensíveis, podendo ser utilizados em programas de melhoramento genético visando tolerância a interferência de plantas daninhas.

Manifestation of the pairing symmetry in the vortex core structure in iron-based superconductors

The superconducting gap is a basic character of a superconductor. While the cuprates and conventional phonon-mediated superconductors are characterized by distinct d- and s-wave pairing symmetries with nodal and nodeless gap distributions respectively, the superconducting gap distributions in iron-based superconductors are rather diversified. While nodeless gap distributions have been directly observed in Ba1–xKxFe2As2, BaFe2–xCoxAs2, LiFeAs, KxFe2–ySe2, and FeTe1–xSex, the signatures of a nodal superconducting gap have been reported in LaOFeP, LiFeP, FeSe, KFe2As2, BaFe2–xRuxAs2, and BaFe2(As1–xPx)2. Due to the multiplicity of the Fermi surface in these compounds s± and d pairing states can be both nodeless and nodal. A nontrivial orbital structure of the order parameter, in particular the presence of the gap nodes, leads to effects in which the disorder is much richer in dx2–y2-wave superconductors than in conventional materials. In contrast to the s-wave case, the Anderson theorem does not work, and nonmagnetic impurities exhibit a strong pair-breaking influence. In addition, a finite concentration of disorder produces a nonzero density of quasiparticle states at zero energy, which results in a considerable modification of the thermodynamic and transport properties at low temperatures. The influence of order parameter symmetry on the vortex core structure in iron-based pnictide and chalcogenide superconductors has been investigated in the framework of quasiclassical Eilenberger equations. The main results of the thesis are as follows. The vortex core characteristics, such as, cutoff parameter, ξh, and core size, ξ2, determined as the distance at which density of the vortex supercurrent reaches its maximum, are calculated in wide temperature, impurity scattering rate, and magnetic field ranges. The cutoff parameter, ξh(B; T; Г), determines the form factor of the flux-line lattice, which can be obtained in _SR, NMR, and SANS experiments. A comparison among the applied pairing symmetries is done. In contrast to s-wave systems, in dx2–y2-wave superconductors, ξh/ξc2 always increases with the scattering rate Г. Field dependence of the cutoff parameter affects strongly on the second moment of the magnetic field distributions, resulting in a significant difference with nonlocal London theory. It is found that normalized ξ2/ξc2(B/Bc2) dependence is increasing with pair-breaking impurity scattering (interband scattering for s±-wave and intraband impurity scattering for d-wave superconductors). Here, ξc2 is the Ginzburg-Landau coherence length determined from the upper critical field Bc2 = Φ0/2πξ2 c2, where Φ0 is a flux quantum. Two types of ξ2/ξc2 magnetic field dependences are obtained for s± superconductors. It has a minimum at low temperatures and small impurity scattering transforming in monotonously decreasing function at strong scattering and high temperatures. The second kind of this dependence has been also found for d-wave superconductors at intermediate and high temperatures. In contrast, impurity scattering results in decreasing of ξ2/ξc2(B/Bc2) dependence in s++ superconductors. A reasonable agreement between calculated ξh/ξc2 values and those obtained experimentally in nonstoichiometric BaFe2–xCoxAs2 (μSR) and stoichiometric LiFeAs (SANS) was found. The values of ξh/ξc2 are much less than one in case of the first compound and much more than one for the other compound. This is explained by different influence of two factors: the value of impurity scattering rate and pairing symmetry.

Optimization of parameters for fiber laser-MAG hybrid welding in shipbuilding applications

The Arctic region becoming very active area of the industrial developments since it may contain approximately 15-25% of the hydrocarbon and other valuable natural resources which are in great demand nowadays. Harsh operation conditions make the Arctic region difficult to access due to low temperatures which can drop below -50 °C in winter and various additional loads. As a result, newer and modified metallic materials are implemented which can cause certain problems in welding them properly. Steel is still the most widely used material in the Arctic regions due to high mechanical properties, cheapness and manufacturability. Moreover, with recent steel manufacturing development it is possible to make up to 1100 MPa yield strength microalloyed high strength steel which can be operated at temperatures -60 °C possessing reasonable weldability, ductility and suitable impact toughness which is the most crucial property for the Arctic usability. For many years, the arc welding was the most dominant joining method of the metallic materials. Recently, other joining methods are successfully implemented into welding manufacturing due to growing industrial demands and one of them is the laser-arc hybrid welding. The laser-arc hybrid welding successfully combines the advantages and eliminates the disadvantages of the both joining methods therefore produce less distortions, reduce the need of edge preparation, generates narrower heat-affected zone, and increase welding speed or productivity significantly. Moreover, due to easy implementation of the filler wire, accordingly the mechanical properties of the joints can be manipulated in order to produce suitable quality. Moreover, with laser-arc hybrid welding it is possible to achieve matching weld metal compared to the base material even with the low alloying welding wires without excessive softening of the HAZ in the high strength steels. As a result, the laser-arc welding methods can be the most desired and dominating welding technology nowadays, and which is already operating in automotive and shipbuilding industries with a great success. However, in the future it can be extended to offshore, pipe-laying, and heavy equipment industries for arctic environment. CO2 and Nd:YAG laser sources in combination with gas metal arc source have been used widely in the past two decades. Recently, the fiber laser sources offered high power outputs with excellent beam quality, very high electrical efficiency, low maintenance expenses, and higher mobility due to fiber optics. As a result, fiber laser-arc hybrid process offers even more extended advantages and applications. However, the information about fiber or disk laser-arc hybrid welding is very limited. The objectives of the Master’s thesis are concentrated on the study of fiber laser-MAG hybrid welding parameters in order to understand resulting mechanical properties and quality of the welds. In this work only ferrous materials are reviewed. The qualitative methodological approach has been used to achieve the objectives. This study demonstrates that laser-arc hybrid welding is suitable for welding of many types, thicknesses and strength of steels with acceptable mechanical properties along very high productivity. New developments of the fiber laser-arc hybrid process offers extended capabilities over CO2 laser combined with the arc. This work can be used as guideline in hybrid welding technology with comprehensive study the effect of welding parameter on joint quality.

I Stället för tro = In place of belief

Soitinnus: sekakuoro, piano 4-kät.

Bibliographic import from Scopus and WoS

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Relação entre vegetação e solo em um gradiente florestal na Estação Ecológica do Panga, Uberlândia (MG)

Relacionou-se a composição física (granulometria) e química (macronutrientes e parâmetros de fertilidade) do solo com um gradiente florestal formado por mata de galeria, mata mesófila semidecídua de encosta e cerradão, na Estação Ecológica do Panga, Uberlândia - MG. Foram analisadas 211 amostras de solo, coletadas a uma profundidade de 0-20 cm. As fitofisionomias são estatisticamente distintas entre si quanto a cálcio, magnésio, potássio, fósforo, alumínio, saturação por alumínio, saturação por bases e matéria orgânica, enquanto que, para outros atributos edáficos, podem ser encontrados pares fitofisionômicos semelhantes. Algumas espécies vegetais encontram-se distribuídas no gradiente florestal seguindo a variação da composição físico-química do solo, enquanto outras se apresentam indiferentes ao gradiente edáfico. Há evidências de que o solo representa um importante papel para a estruturação vegetal ao longo do gradiente florestal estudado.

Ecologia morfofuncional de plântulas de espécies arbóreas da Estação Ecológica do Panga, Uberlândia, Minas Gerais

Realizou-se a classificação morfofuncional de plântulas de 122 espécies arbóreas da Estação Ecológica do Panga. Espécies de três formações florestais contíguas - mata de galeria, mata mesófila semidecídua e cerradão - tiveram suas plântulas classificadas segundo suas características cotiledonares de posição, textura e exposição. O estudo objetivou verificar se as espécies estudadas enquadravam-se no sistema de classificação utilizado e se existiria alguma relação entre os tipos morfofuncionais de plântulas com grupos sucessionais, síndrome de dispersão, peso das sementes, micro-habitat, sistemas sexuais, épocas de frutificação e relação entre a biomassa de raízes e partes aéreas. As espécies foram incluídas em cinco categorias, sendo 63 espécies do tipo fanero-epígeo-foliáceo (PEF), 20 fanero-epígeo-armazenador (PER), 10 fanero-hipógeo-armazenador (PHR), 28 cripto-hipógeo-armazenador (CHR) e apenas uma espécie do tipo cripto-epígeo-armazenador (CER). A classificação morfofuncional mostrou-se eficaz, representando praticamente todas as espécies. Não houve relações significativas dos grupos morfofuncionais com a síndrome de dispersão, época de frutificação, biomassa raiz/parte aérea ou local de ocorrência das espécies estudadas. Por outro lado, foi possível relacionar os grupos sucessionais, peso das sementes e os sistemas sexuais aos grupos morfofuncionais. Espécies pioneiras, em sua maioria com sementes pequenas e leves apresentaram quase exclusivamente plântulas PEF, enquanto espécies climácicas tolerantes à sombra, usualmente com um menor número de sementes maiores e com maior quantidade de reservas, apresentaram predominantemente plântulas CHR. Este tipo também foi predominante entre espécies dióicas. Os resultados demonstraram que, pelo menos no estágio inicial, a morfologia desempenha funções determinantes nos processos de desenvolvimento e estabelecimento das plântulas de espécies arbóreas.

Correlation between high molecular weight gluten subunits composition and bread-making quality in Brazilian wheat

Bread-making quality is one of the most important targets in the genetic improvement of wheat. Although extensive analyses of quality traits such as farinography, sodium dodecyl sulfate (SDS) sedimentation, alveography, and baking are made in breeding programs, these analyses require high amounts of seeds which are obtained only in late generations. In this experiment the statistical correlations between the high molecular weight subunit of glutenin and bread-making quality measured by alveograph, farinograph and SDS sedimentation were evaluated. Seventeen wheat genotypes were grown under the same conditions, each producing about 1 kg of seeds for the evaluations. The high molecular weight (HMW) glutenin subunits were analyzed by SDS-PAGE. Statistical correlations were highly significant between HMW glutenin subunits and alveograph and SDS sedimentation. These results indicate the possibility of manipulating major genes for wheat seed quality by coupling traditional breeding with non-destructive single seed analysis. Only half seed is necessary to perform the SDS-PAGE analysis. Therefore, the other half seed can be planted to generate the progeny. Seed yield and SDS sedimentation were statistically correlated, indicating the possibility of simultaneous selection for both traits