Reliability and need for standardisation of electrical systems in small wooden fishing vessels

The working condition and atmosphere in a wooden fishing vessel are generally most injurious to the electrical systems. Therefore great care has to be taken in designing electrical systems for small c1afts. This paper deals with the difficult operating conditions and standardisation of electrical systems as applicable to small fishing vessels.

Hydraulics for small fishing trawlers

Fishing vessels where electric power supply from alternator is available to operate various auxiliaries located anywhere in the vessel, the small crafts, which constitute over 95% of the total fishing crafts operating in India, are entirely dependent on one source of power, i. e. the main diesel engine. To utilize this source of motive power to operate the winches and other auxiliaries, mechanical drive involving shafts, bearings and pulleys, is inconvenient. This paper presents basic advantages of hydraulic system over mechanical drive.

Pseudogenization of the tumor-growth promoter angiogenin in a leaf-eating monkey

Physiological functions of human genes may be studied by gene-knockout experiments in model organisms such as the mouse. This strategy relies on the existence of one-to-one gene orthology between the human and mouse. When lineage-specific gene duplication occurs and paralogous genes share a certain degree of functional redundancy, knockout mice may not provide accurate functional information on human genes. Angiogenin is a small protein that stimulates blood-vessel growth and promotes tumor development. Humans and related primates only have one angiogenin gene, while mice have three paralogous genes. This makes it difficult to generate angiogenin-knockout mice and even more difficult to interpret the genotype-phenotype relation from such animals should they be generated. We here show that in the douc langur (Pygathrix nemaeus), an Asian leaf-eating colobine monkey, the single-copy angiogenin gene has a one-nucleotide deletion in the sixth codon of the mature peptide, generating a premature stop codon. This nucleotide deletion is found in five unrelated individuals sequenced, and therefore is likely to have been fixed in the species. Five colobine species that are closely related to the douc langur have intact angiogenin genes, suggesting that the pseudogenization event was recent and unique to the douc langur lineage. This natural knockout experiment suggests that primate angiogenin is dispensable even in the wild. Further physiological studies of douc largurs may offer additional information on the role of this cancer-related gene in normal physiology of primates, including humans. Our findings also provide a strong case for the importance of evolutionary analysis in biomedical studies of gene functions. (C) 2003 Elsevier Science B.V. All rights reserved.

Can the occurrence of rare insertion/deletion polymorphisms in human mtDNA be verified from phylogeny?

Due to its specific characteristics, such as maternal inheritance and absence of recombination, each mtDNA belongs to certain monophyletic clade in the rooted mtDNA tree (haplogroup) according to the mutations it harbors. Rare mutation (excluding parallel mutation) occurring at multiple times in different haplogroups could thus be a potential reading error according to the mtDNA phylogeny. This experience has been widely used in double-checking the credibility of the rare mutations in human mtDNA sequences. However, no test has been performed so far for the feasibility of applying this strategy to the rare insertion/deletion (indel) events in mtDNA sequences. In this study, we attempted to relate the rare indels in mtDNAs to their haplogroup status in a total of 2352 individuals from 50 populations in China. Our results show that the insertion of A at position 16259 is restricted to a subclade of haplogroup C and can be verified. The other indel polymorphisms, which occur in the repeat of the deleted or inserted nucleotide(s), may not be distinguished from phantom mutations from a phylogenetic point of view. Independently and multiply sequencing the fragment with the indel is the best and the most reliable way for confirmation.

Double-rig shrimp trawling, its rigging, comparative efficiency and economics

A radical and revolutionary change from the hitherto employed shrimp trawling is reported for better productivity and economy in deep sea trawling with medium and large vessels. Studies carried out off Veraval with a 13.7 m. four seam shrimp trawl as conventional single-rig and two 6.8 m four seam shrimp trawls as double-rig from a 15.2 m fishing vessel showed an increase of 98% shrimp catch by double-rig over single-rig at 86.3 % of the power utilised by the latter. It has also been worked out, theoretically, how better this available power can be utilised for further improvement of catch. An increase of 15% head rope length in case of double-rig over the optimum single-rig gear of any vessel is recommended.

Development of a torque meter for fishing vessels

The paper describes the development of an electronic instrument to measure the torque developed on the propeller shaft of fishing vessels at various speeds of the propeller. By measuring the torque, it is possible to determine the actual power transmitted from the engine gear-box unit to the propeller so that propeller efficiency can be evaluated and the optimum size of the propeller for a specific engine and vessel can be determined.

Economic analysis of 22m and 23m deep sea trawlers

The cost-benefit analysis of 23m and 22m trawlers operated from Visakhapatnam base is presented. The study indicated that the deep sea fishing in Indian waters is a profitable venture. The profit over capital investment for a 23m trawler worked out to about 18% whereas the same was about 10% for a 22m trawler. Catch per trawling operation, cost of production, productivity per man year, energy yield etc. establish the economic superiority of 23m vessel.

Estimating material elasticity by spherical indentation load-relaxation tests on viscoelastic samples of finite thickness

A two-step viscoelastic spherical indentation method is proposed to compensate for 1) material relaxation and 2) sample thickness. In the first step, the indenter is moved at a constant speed and the reaction force is measured. In the second step, the indenter is held at a constant position and the relaxation response of the material is measured. Then the relaxation response is fit with a multi-exponential function which corresponds to a three-branch general Maxwell model. The relaxation modulus is derived by correcting the finite ramp time introduced in the first step. The proposed model takes into account the sample thickness, which is important for applications in which the sample thickness is less than ten times the indenter radius. The model is validated numerically by finite element simulations. Experiments are carried out on a 10% gelatin phantom and a chicken breast sample with the proposed method. The results for both the gelatin phantom and the chicken breast sample agree with the results obtained from a surface wave method. Both the finite element simulations and experimental results show improved elasticity estimations by incorporating the sample thickness into the model. The measured shear elasticities of the 10% gelatin sample are 6.79 and 6.93 kPa by the proposed finite indentation method at sample thickness of 40 and 20 mm, respectively. The elasticity of the same sample is estimated to be 6.53 kPa by the surface wave method. For the chicken breast sample, the shear elasticity is measured to be 4.51 and 5.17 kPa by the proposed indentation method at sample thickness of 40 and 20 mm, respectively. Its elasticity is measured by the surface wave method to be 4.14 kPa. © 2011 IEEE.

Development of a fishing log for use in trawlers

The paper describes the technical and operational features of a composite equipment for simultaneous measurement of five important parameters, warp load, boat speed, water temperature, water salinity and air temperature pertaining to the craft, gear and the environment. The equipment is designed for continuous measurement in small and medium crafts easily without disturbance to routine fishing operations. The system operated on 9V supply, is suitable for portable operations from one vessel to another. The compact electronic meter kept in the wheel-house displays the data one by one in engineering units.

Identification of mesopelagic fish (with emphasis on major family) in Iranian water of the Oman Sea

This project was done for identifying the mesopelagic fish of the Iranian waters of Oman Sea, during two year from 2008 to 2010. The specimens were collected using two trawler vessel from nine station. All the specimens were fixed in formalin then in 70% alcohol and carried to the laboratory. In total of 19 species belonged to 14 families of 6 orders identified including: Echinorhinidae, Stomidae, Phosichthyidae, Synodontidae, Paralepididae, Myctophidae, Acropomatidae, Priacanthidae, Pentacerotidae, Champsodontidae, Gempylidae, Trichiuridae, Nomeidae and Congridae. Of which 17 species were identified up to species level including: Echinorhinus brucus, Bathophilus indicus, Chauliodus sloani, Harpadon nehereus, Lestrolepis japonica, Benthosema pterotum, Diaphus garmani, Diaphus effulgens, Bolinichthys photothorax, Acropoma japonicum, Synagrops adeni, Cookeolus boops, Histiopterus typus, Champsodon sagittus, Neoepinnula orientalis, Trichiurus lepturus, Cubiceps baxteri. Vinciguerria was identified up to genus level because only one specimen caught during the survey and one species (Congridae) was identified up to family level because only 3 specimens of this fish in early stage of life were caught and their characters were not suitable for identify up to species level. The highest species belong to Myctophidae family of Myctophiformes order.

Biology and distribution of grouper (Epinephelus coioides) in province waters (Abadan Bhrakan)

This survay has been done from Januray 2000 till May 2002 in Khouzestan costal waters. Four species of grouper were identified from which orange spotted grouper (Epinephelus coioides) was the dominant species. For studing environmental parameters and reproductive biology, age, growth parameters and mortality rate samples were collected by fishing ship. Samples were taken montly in 4 days by fishing traps and trawls. In addition, some samples were obtained from Khozestan fish landing centres. Environmental factors such as PH, 02, salinity, water temperature and depth of traping areas, were measured. To identify species, morphometric characteries of 452 individal fishes were measured. Stomach contents of 394 fish were has survaid, from which stomach of 226 fish, and 168 fish had empty stomachs. Percentage of empty stomachs (cv) in males was more than females. Food items found in 73 percent of stomach were crab (11%), shrimps (8.8%) , squids (3.9%), gastropods (17%) and bivalves (0.4%). Feeding intensity in year classes did not obay logic trends The importance relatively indicator (I.R.I) were 81, 9.9, 4, 1.5 and 0.3 percent for fish, crab, shrimp, squid, gastropod and bivalve respectively. For age determination, sagita otoliths of 450 fish were taken and countable sections were obtained from 425 specimens. Relative frequency distribution of opaque and transparent rings showed that each opaque growth ring generates once a year from November to September. It seemed that generation of opaque rings is affected by temperature and photoperiod changes. Correlation between length and age was calculated using Von Bertalanffy's least square method. Following equasion was obtaind: L(t) : 122.27 (1 e 0.146 (t+0.482)) Growth parameters were determined through by Ford Walford equasion and Response Surface and Shepherd subcommands in Elefan program and L00 and K amounts were have determined. Correlation between length and age of 635 fish was determined by gender . Length and age correlation was calculated by exponential model and between total length and standard length by straghit line model. Correlation between age and weight of sagita was calculated by total length and age. The most Correlation was between sagita weight and fish age (r=0.876). Total mortality rate (z) was estimated by Length Converthed Method , Jones and Vanzaling and Powel Wetherall. Total mortality rate was z=0.39. Natural mortality rate, using Pauly method was calculated M=0.32. Fishing mortality (F) was 0.08. Gonads of 425 fishes were surveid within 18 month, from which 363 were female, 46 were male and 16 were sex reversing individuals .Total length of females varied from 26 to 95.5 centimeters while males length varied from 56.5 to 107 centimeters. Sex reversing individuals had a length of 47.5 centimeters, when two years old and 62.5 centimeters at age of 3 years. From the mentioned 425 fish, 401 individuals were matured, containing 339 females and 62 males, 5.47 females against each male. Montly changes of Gonadosomatic Index (GSI) by total body weight and standard length and total body length showed that this index increases from march to May and maximum increase was in May . This experiment was adapted in spawning season. Potential, relative, and absoulate fecundity was estimated by counting eggs in three samples. Total amount of traped fish using special traps was 16182.18 kg from which Epinephelus coioides provided catching 15353.43 kg of it (91.27 %) and By catch was 141.18 kg (8.24 %). Total average CPUE for whole catch was 123.33 kg/day/vessel. Total amount of catch was estimated 232.04 tons, considering CPUE of total catch and total Khuzestan trap ships effort.

A call for mtDNA data quality control in forensic science

There is increasing evidence that many of the mitochondrial DNA (mtDNA) databases published in the fields of forensic science and molecular anthropology are flawed. An a posteriori phylogenetic analysis of the sequences could help to eliminate most of the errors and thus greatly improve data quality. However, previously published caveats and recommendations along these lines were not yet picked up by all researchers. Here we call for stringent quality control of mtDNA data by haplogroup-directed database comparisons. We take some problematic databases of East Asian mtDNAs, published in the Journal of Forensic Sciences and Forensic Science International, as examples to demonstrate the process of pinpointing obvious errors. Our results show that data sets are not only notoriously plagued by base shifts and artificial recombination but also by lab-specific phantom mutations, especially in the second hypervariable region (HVR-II). (C) 2003 Elsevier Ireland Ltd. All rights reserved.