The relationship between otolith increments and time for yellowfin and skipjack tuna marked with tetracycline

ENGLISH: The rate at which increments are deposited on the sagittal otoliths of yellowfin (Thunnus albacares) and skipjack (Katsuwonus p elamis) tunas is determined by a markrecapture experiment using tetracycline. During growth in fork length from 40 to 110 em, and for a period of up to 389 days, yellowfin of the Revillagigedo Islands- Baja California region deposit one increment per day in either the postrostrum or rostrum position of the otolith. For skipjack of the same region, rostrum increments underestimate time by approximately 24 percent during growth from 42 to 64 cm and over the maximum interval of 249 days. The growth rate of each species is estimated from the recapture fork length and the linear change in an otolith dimension following tetracycline injection. Over specific ranges in fork length the rates are 3.06 and 1.15 em per month for yellowfin and skipjack, respectively. SPANISH: La rapidez (tasa) en la que se depositan los incrementos en los otolitos sagitales del aleta amarilla (Thunnus albacares) y el barrilete (Katsuwonus pelamis) se determina mediante un experimento al recapturar los peces que han sido marcados con tetraciclina. Durante el crecimiento de la longitud de horquilla de 40 a 110 cm y por un período hasta de 389 días, se forma en el aleta amarilla de la región de las Islas Revillagigedo-Baja California, un incremento diario ya sea en el parte del postrostrum o rostrum de los otolitos. Con respecto al barrilete de la misma region los incrementos en el rostrum subestiman aproximadamente el tiempo en un 24 por ciento durante el crecimiento de 42 a 64 cm y sobre un intervalo máximo de 249 días. El índice de crecimiento de cada especie se estima en la recaptura según la longitud de horquilla y el cambio lineal en la dimensión de un otolito después de la inyección de tetraciclina. La variación específica sobre la longitud de horquilla de los índices son 3.06 y 1.15 cm por mes para el aleta amarilla y el barrilete, respectivamente. (PDF contains 54 pages.)

Length-weight relationship and the diets of Clarias lazera (Cuvier and Valenciennes), family Clariidae (Osteichthyes: Siluriformes) in Zaria, Nigeria

The length-weight relationship and the diets of Clarias lazera were investigated between July 1981 and June 1982. About 450 specimens were examined. The standard lengths of the fish ranged from 8.5 cm to 42.2 cm. Significant differences were found between the standard lengths of the males and females with the latter slightly shorter. Somatic weights varied between 10 g to 502 g. Length-weight regression analysis gave a "b" value of 3.02 for both males and females combined; thus indicating an isometric growth. Analysis of the food in the stomachs showed that the fish is an omnivore although, it fed more on insects and fish than other food items

Length weight relationship, condition factors and fecundity of Chrysichthys nigrodigitatus and Chrysichthys walkeri in Asejire Lake

Sex ratio and fecundity variations of Chrysichthys nigrodigitatus and Chrysichthys walkeri from Asejire Lake (Nigeria) were examined. The Logarithm transformation of weight (W) against standard length (SL) gave a straight-line graph represented by the following equations: 1) C. nigrodigitatus LogW =-0.66 + 2.13 Log SL; = 0.854; (P < 0.001) n = 209; 2) C. walkeri LogW = -1.23 + 2.63 Log SL; = 0.759; (P < 0.001) n = 237. Males were generally more than females in both species. The ratio of males:females was higher in C. nigrodigitatus (1:0.18) than in C. walkeri (1:0.8). C. walkeri attained sexual maturity at a smaller size of 20.0 g (12.0 cm Standard Length) compared with C. nigrodigitatus maturity size of 45.0 g (14.0 cm Standard Length). Relative fecundity was not dependent on body weight and standard length for C. walkeri but it was significant at P < 0.05 and P < 0.01 respectively for C. nigrodigitatus

Length-weight relationship and organ indices of pond raised and wild population of C. gariepinus (Burchell 1822) pisces-Claridae

Samples of C. gariepinus collected from the wild and cultured populations in Plateau and Niger States of Nigeria were analyzed for length-weight relationship and organ indices (Gonadosomatic index (GSI), hepatosomatic index (HSI), renalsomatic index (RSI) and somatic fat deposit index (PDI). High correlation and linear relationship between body length and body weight was observed in all sample population (P<0.05). A significant difference was observed between the GSI of males and females of both wild and cultured population and also between females of the wild and cultured population,(P < 0.05).There was no significant difference in HSI, CSI RSI and PDI of all the sample populations (P < 0.05).The importance of length-weight relationship and organ indices in fish production are discussed

The relationship between the radio and gamma-ray emission of blazars

Blazars are active galaxies with a jet closely oriented to our line of sight. They are powerful, variable emitters from radio to gamma-ray wavelengths. Although the general picture of synchrotron emission at low energies and inverse Compton at high energies is well established, important aspects of blazars are not well understood. In particular, the location of the gamma-ray emission region is not clearly established, with some theories favoring a location close to the central engine, while others place it at parsec scales in the radio jet.

We developed a program to locate the gamma-ray emission site in blazars, through the study of correlated variations between their gamma-ray and radio-wave emission. Correlated variations are expected when there is a relation between emission processes at both bands, while delays tell us about the relative location of their energy generation zones. Monitoring at 15 GHz using the Owens Valley Radio Observatory 40 meter telescope started in mid-2007. The program monitors 1593 blazars twice per week, including all blazars detected by the Fermi Gamma-ray Space Telescope (Fermi) north of -20 degrees declination. This program complements the continuous monitoring of gamma-rays by Fermi.

Three year long gamma-ray light curves for bright Fermi blazars are cross-correlated with four years of radio monitoring. The significance of cross-correlation peaks is investigated using simulations that account for the uneven sampling and noise properties of the light curves, which are modeled as red-noise processes with a simple power-law power spectral density. We found that out of 86 sources with high quality data, only three show significant correlations (AO 0235+164, B2 2308+34 and PKS 1502+106). Additionally, we find a significant correlation for Mrk 421 when including the strong gamma-ray/radio flare of late 2012. In all four cases radio variations lag gamma-ray variations, suggesting that the gamma-ray emission originates upstream of the radio emission. For PKS 1502+106 we locate the gamma-ray emission site parsecs away from the central engine, thus disfavoring the model of Blandford and Levinson (1995), while other cases are inconclusive. These findings show that continuous monitoring over long time periods is required to understand the cross-correlation between gamma-ray and radio-wave variability in most blazars.

The head-body weight and head-body length relationship of Synodontis schall (Bloch and Schneider 1801) in Asa Lake, Ilorin, Nigeria

A total of 710 specimens of Synodontis schall were analyzed for the head body weight and head body length relationship. The head constituted 40% of the total body weight and 30% of the total body length. The mean head weight for male and female computed was 23.90g and 29.13g respectively. Head weight in both male and female was significantly different (P<0.01) while the head length for the combined sexes showed no significant difference (P>0.05). Fat accumulation in the body tissue was prominent in the females than males usually before the breeding season. The significance of the cephalo-nuchal shield in the bony head of Synodontis species compared with some other catfishes in the lake was also discussed

The relationship between some physicochemical parameters and plankton composition on fish production in ponds

The effect of physico-chemical parameters and plankton composition on fish production in ponds was investigated in six fish farms for eight weeks. The physicochemical parameters investigated were temperature=25-30 plus or minus C, transparency=0.45-0.57m, dissolved oxygen=3.0-10.9mg/l, pH=6.0-7.7, dissolved carbon dioxide=5.46-28.3mg/l, total alkalinity=44.37-80.0ppm, chemical oxygen demand=31.88-72.18mg/l and biological oxygen demand=0.66-48.34mg/l. Plankton composition varies and was made of four families of phytoplankton namely; Cyanophyceae, Chlorophyceae, Dinophyceae and Diatomida; and four families of zooplankton viz; Protozoa, Rotifera, Copepoda and Dinoflagellates. Farm 1 and 6 recorded the highest average weight of about 1.0kg and average total length of about 40.0cm for the two fish species. This study showed that fish yield was dependable on the quality and management of pond water characteristics

Relationship between the basic morphometric measurements and growth pattern of Heterotis niloticus from River Kaduna floodplain

A total of 61 specimens of Heterotis niloticus were evaluated by linear regression and correlation. The specimens had mean standard length of 27.09 plus or minus 4.73cm, total length of 33-49cm, mean weight of 2445,108.3g, mean snout length of 48 plus or minus 0.86cm, mean eye diameter of 1.30 plus or minus 0.15cm, mean head length of 6.29 plus or minus 1.75cm. There was a strong relationship between the length and the weight, the eye diameter and the standard length, snout length and the standard length, head length and the standard length, snout length and the weight, head length and the weight (P<0.05). But the correlation of the eye diameters and the weight was insignificant (P>0.05). The growth pattern analysis depicts that the growth was negatively allometric with a b value of 1.16

Fishery resource surveys: beyond length-weight relationship models

Fisheries resource surveys are regular management tools for rational exploitation of commercial fisheries. In a growing number of cases, the use of these resource surveys has been largely restricted to assessment of the relative well being of fish stocks and the potential yields of such fisheries. This paper seeks to demonstrate that the data from such surveys can also be easily used to evaluate species diversity of such fisheries, both in terms of species richness and equitability of distribution. Using published data on two freshwater and two marine fisheries as case studies, Shannon-Wiener Diversity Function and Simpson's Index were computed for each of these fisheries. These biodiversity indices gave a deeper insight into the environmental status of each of these fisheries, beyond what the length-weight relationship models can reveal. Generally, while the marine fisheries showed more species richness, the freshwater fisheries apparently had more stable and equilibrated fish communities

Design for all: designing for the motion-impaired user

Designing for all requires the adaptation and modification of current design best practices to encompass a broader range of user capabilities. This is particularly the case in the design of the human-product interface. Product interfaces exist everywhere and when designing them, there is a very strong temptation to jump to prescribing a solution with only a cursory attempt to understand the nature of the problem. This is particularly the case when attempting to adapt existing designs, optimised for able-bodied users, for use by disabled users. However, such approaches have led to numerous products that are neither usable nor commercially successful. In order to develop a successful design approach it is necessary consider the fundamental structure of the design process being applied. A three stage design process development strategy which includes problem definition, solution development and solution evaluation, should be adopted. This paper describes the development of a new design approach based on the application of usability heuristics to the design of interfaces. This is illustrated by reference to a particular case study of the re-design of a computer interface for controlling an assistive device.