940 resultados para Unbalanced circuit
Resumo:
A period timing device suitable for processing laser Doppler anemometer signals has been described here. The important features of this instrument are: it is inexpensive, simple to operate, and easy to fabricate. When the concentration of scattering particles is low the Doppler signal is in the form of a burst and the Doppler frequency is measured by timing the zero crossings of the signal. But the presence of noise calls for the use of validation criterion, and a 5–8 cycles comparison has been used in this instrument. Validation criterion requires the differential count between the 5 and 8 cycles to be multiplied by predetermined numbers that prescribe the accuracy of measurement. By choosing these numbers to be binary numbers, much simplification in circuit design has been accomplished since this permits the use of shift registers for multiplication. Validation accuracies of 1.6%, 3.2%, 6.3%, and 12.5% are possible with this device. The design presented here is for a 16-bit processor and uses TTL components. By substituting Schottky barrier TTLs the clock frequency can be increased from about 10 to 30 MHz resulting in an extension in the range of the instrument. Review of Scientific Instruments is copyrighted by The American Institute of Physics.
Resumo:
The small signal ac response is measured across the source-drain terminals of poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) field-effect transistor under dc bias to obtain the equivalent circuit parameters in the dark, and under a monochromatic light (540 nm) of various intensities. The numerically simulated response based on these parameters shows deviation at low frequency which is related to the charge accumulation at the interface and the contact resistance at the electrodes. This method can be used to differentiate the photophysical phenomena occurring in the bulk from that at the metal-semiconductor interface for polymer field-effect transistors. ©2009 American Institute of Physics
Resumo:
In an earlier paper [1], it has been shown that velocity ratio, defined with reference to the analogous circuit, is a basic parameter in the complete analysis of a linear one-dimensional dynamical system. In this paper it is shown that the terms constituting velocity ratio can be readily determined by means of an algebraic algorithm developed from a heuristic study of the process of transfer matrix multiplication. The algorithm permits the set of most significant terms at a particular frequency of interest to be identified from a knowledge of the relative magnitudes of the impedances of the constituent elements of a proposed configuration. This feature makes the algorithm a potential tool in a first approach to a rational design of a complex dynamical filter. This algorithm is particularly suited for the desk analysis of a medium size system with lumped as well as distributed elements.
Resumo:
Feature films remain critical flagships to any national film industry. Australian feature films can be highly commercial endeavours that also perform symbolic functions by embodying the national imaginary in big screen based sound and imagery. They conduct a dialogue with domestic audiences as well as showcase key aspects of Australia in the global film festival circuit. As the pre-eminent filmmaking form, feature films also serve as important launchpads for the careers of many Australian writers, directors, actors and technical crew. In the wake of over a decade of diminished share of local box office obtained by Australian feature films, Australian Feature Films and Distribution: Industry or cottage industry, examines issues in the production sector affecting the performance of Australian feature films and some responses by the central funding and support screen agency, Screen Australia.
Resumo:
The design and implementation of a complete gas sensor system for liquified petroleum gas (LPG) gas sensing are presented. The system consists of a SnO2 transducer, a lowcost heater, an application specific integrated circuit (ASIC) with front-end interface circuitry, and a microcontroller interface for data logging. The ASIC includes a relaxation-oscillator-based heater driver circuit that is capable of controlling the sensor operating temperature from 100degC to 425degC. The sensor readout circuit in the ASIC, which is based on the resistance to time conversion technique, has been designed to measure the gas sensor response over three orders of resistance change during its interaction with gases.
Resumo:
The methods for estimating methane emissions from cattle as used in the Australian national inventory are based on older data that have now been superseded by a large amount of more recent data. Recent data suggested that the current inventory emissions estimates can be improved. To address this issue, a total of 1034 individual animal records of daily methane production (MP) was used to reassess the relationship between MP and each of dry matter intake (DMI) and gross energy intake (GEI). Data were restricted to trials conducted in the past 10 years using open-circuit respiration chambers, with cattle fed forage-based diets (forage >70%). Results from diets considered to inhibit methanogenesis were omitted from the dataset. Records were obtained from dairy cattle fed temperate forages (220 records), beef cattle fed temperate forages (680 records) and beef cattle fed tropical forages (133 records). Relationships were very similar for all three production categories and single relationships for MP on a DMI or GEI basis were proposed for national inventory purposes. These relationships were MP (g/day) = 20.7 (±0.28) × DMI (kg/day) (R2 = 0.92, P < 0.001) and MP (MJ/day) = 0.063 (±0.008) × GEI (MJ/day) (R2 = 0.93, P < 0.001). If the revised MP (g/day) approach is used to calculate Australia’s national inventory, it will reduce estimates of emissions of forage-fed cattle by 24%. Assuming a global warming potential of 25 for methane, this represents a 12.6 Mt CO2-e reduction in calculated annual emissions from Australian cattle.
Resumo:
A monostable multivibrator configuration using a new technique of regenerative feedback is discussed. This circuit provides an elegant alternative in situations wherein several monostable multivibrators have to be connected in tandem.
Resumo:
Typescript about Julius and Paula (née Hirsch) Briske and their three children, Hans, Elisabeth, and Julius. Also included are Judge Briske’s letters of appointment.
Resumo:
This thesis examines the right to self-determination which is a norm used for numerous purposes by multiple actors in the field of international relations, with relatively little clarity or agreement on the actual and potential meaning of the right. In international practice, however, the main focus in applying the right has been in the context of decolonization as set by the United Nations in its early decades. Thus, in Africa the right to self-determination has traditionally implied that the colonial territories, and particularly the populations within these territories, were to constitute the people who were entitled to the right. That is, self-determination by decolonization provided a framework for the construction of independent nation-states in Africa whilst other dimensions of the right remained largely or totally neglected. With the objective of assessing the scope, content, developments and interpretations of the right to self-determination in Africa, particularly with regard to the relevance of the right today, the thesis proceeds on two fundamental hypotheses. The first is that Mervyn Frost s theory of settled norms, among which he lists the right to self-determination, assumes too much. Even if the right to self-determination is a human right belonging to all peoples stipulated, inter alia, in the first Article of the 1966 International Human Rights Covenants, it is a highly politicized and context-bound right instead of being settled and observed in a way that its denial would need special justification. Still, the suggested inconsistency or non-compliance with the norm of self-determination is not intended to prove the uselessness or inappropriateness of the norm, but, on the contrary, to invite and encourage debate on the potential use and coverage of the right to self-determination. The second hypothesis is that within the concept of self-determination there are two normative dimensions. One is to do with the idea and practice of statehood, the nation and collectivity that may decide to conduct itself as an independent state. The other one is to do with self-determination as a human right, as a normative condition, to be enjoyed by people and peoples within states that supersedes state authority. These external and internal dimensions need to be seen as complementary and co-terminous, not as mutually exclusive alternatives. The thesis proceeds on the assumption that the internal dimension of the right, with human rights and democracy at its core, has not been considered as important as the external. In turn, this unbalanced and selective interpretation has managed to put the true normative purpose of the right making the world better and bringing more just polity models into a somewhat peculiar light. The right to self-determination in the African context is assessed through case studies of Western Sahara, Southern Sudan and Eritrea. The study asks what these cases say about the right to self-determination in Africa and what their lessons learnt could contribute to the understanding and relevance of the right in today s Africa. The study demonstrates that even in the context of decolonization, the application of the right to self-determination has been far from the consistent approach supposedly followed by the international community: in many respects similar colonial histories have easily led to rather different destinies. While Eritrea secured internationally recognized right to self-determination in the form of retroactive independence in 1993, international recognition of distinct Western Sahara and Southern Sudan entities is contingent on complex and problematic conditions being satisfied. Overall, it is a considerable challenge for international legality to meet empirical political reality in a meaningful way, so that the universal values attached to the norm of self-determination are not overlooked or compromised but rather reinforced in the process of implementing the right. Consequently, this thesis seeks a more comprehensive understanding of the right to self-determination with particular reference to post-colonial Africa and with an emphasis on the internal, human rights and democracy dimensions of the norm. It is considered that the right to self-determination cannot be perceived only as an inter-state issue as it is also very much an intra-state issue, including the possibility of different sub-state arrangements exercised under the right, for example, in the form of autonomy. At the same time, the option of independent statehood achieved through secession remains a mode of exercising and part of the right to self-determination. But in whatever form or way applied, the right to self-determination, as a normative instrument, should constitute and work as a norm that comprehensively brings more added value in terms of the objectives of human rights and democracy. From a normative perspective, a peoples right should not be allowed to transform and convert itself into a right of states. Finally, in light of the case studies of Western Sahara, Southern Sudan and Eritrea, the thesis suggests that our understanding of the right to self-determination should now reach beyond the post-colonial context in Africa. It appears that both the questions and answers to the most pertinent issues of self-determination in the cases studied must be increasingly sought within the postcolonial African state rather than solely in colonial history. In this vein, the right to self-determination can be seen not only as a tool for creating states but also as a way to transform the state itself from within. Any such genuinely post-colonial approach may imply a judicious reconsideration, adaptation or up-dating of the right and our understanding of it in order to render it meaningful in Africa today.
Resumo:
A simple and rapid method, based on the open-circuit decay of potential, is described for the determination of the current efficiency with which metals are electrodeposited. The advantages and disadvantages of the method are discussed.
Resumo:
A module containing all the functional components required for a digital absolute positioning process of one axis of a machine tool has been designed and constructed. Circuit realization makes use of integrated circuit elements.
Resumo:
A new family of low-power logic circuits, employing a multiemitter transistor input circuit and a modified complementary p-n-p n-p-n output stage, having almost the same performance as standard TTL circuits and suitable for IC use, is reported in this correspondence.
Resumo:
Low-voltage and high-current switching delay characteristics of a simple triggered vacuum gap (TVG) are described using lead zirconate titanate as the dielectric material in the auxiliary gap. This TVG has superior performance at high currents (up to 14 kA was studied) with regard to delay, reliable firing and extended life as compared to the one using either supramica or silicon carbide. The total delay consists of three intervals: to break down the auxiliary gap, to propagate the trigger plasma and to break down the main gap. The data on the influence of the various parameters like the trigger voltage, current, energy and the main circuit energy are given. It has been found that the delay due to the first two intervals is small compared to the third.
Resumo:
A simple firing delay circuit for 3-Ï fully controlled bridge using a phase locked loop is described. The circuit uses very few components and is an improved scheme over the existing methods. The use of this circuit in three-phase thyristor converters and 'circulating current free' mode dual converters is described.
Resumo:
Free charge generation in donor-acceptor (D-A) based organic photovoltaic diodes (OPV) progresses through formation of charge-transfer (CT) and charge-separated (CS) states and excitation decay to the triplet level is considered as a terminal loss. On the other hand a direct excitation decay to the triplet state is beneficial for multiexciton harvesting in singlet fission photovoltaics (SF-PV) and the formation of CT-state is considered as a limiting factor for multiple triplet harvesting. These two extremes when present in a D-A system are expected to provide important insights into the mechanism of free charge generation and spin-character of bimolecular recombination in OPVs. Herein, we present the complete cycle of events linked to spin conversion in the model OPV system of rubrene/C60. By tracking the spectral evolution of photocurrent generation at short-circuit and close to open-circuit conditions we are able to capture spectral changes to photocurrent that reveal the triplet character of CT-state. Furthermore, we unveil an energy up-conversion effect that sets in as a consequence of triplet population build-up where triplet-triplet annihilation (TTA) process effectively regenerates the singlet excitation. This detailed balance is shown to enable a rare event of photon emission just above the open-circuit voltage (VOC) in OPVs.