Assessment of surface water in two Amazonian rivers impacted by industrial wastewater, Barcarena City, Pará State (Brazil)

No ano de 2007, águas superficiais foram coletadas a partir de 21 pontos de amostragem na cidade de Barcarena, Região Norte, Brasil: um ponto de amostragem localizado em um pequeno córrego que recebe descarga de resíduos a partir da indústria de beneficiamento do caulim e deságua no Rio Curuperê, três pontos de amostragens localizados próximos de fontes que emergem na margem esquerda e deságuam no Rio Curuperê, nove pontos de amostragem no Rio Curuperê, que deságua no Rio Dendê, e oito no Rio Dendê, afluente da margem esquerda do Rio Pará. Para todas as amostras de água foram quantificadas 14 variáveis físico-químicas e níveis de 12 metais. Os resultados nos pontos próximos das fontes do Rio Curuperê apresentaram perfil físico-químico e níveis de metais típicos para águas superficiais e esses valores foram utilizados como referência para comparar e identificar possíveis alterações nas características químicas para os demais pontos de amostragem. Quando os resultados das fontes do rio Curuperê foram comparados com os resultados do ponto próximo a descarga de resíduos industriais foram observadas fortes alterações nos valores de 6 variáveis físico-químicas (pH, condutividade elétrica (EC), total de sólidos suspensos (TDS), nitrogênio amoniacal (N-NH4), sulfato (SO4) e salinidade) e aumento em magnitude dos níveis de quatro metais (Al, Fe, Mn e Zn), caracterizando que esses resíduos eram descarregados no ambiente sem tratamentos adequados. Os resultados nos demais pontos de amostragem demonstraram que estas condições anômalas também foram encontradas ao longo dos Rios Curuperê e Dendê, principalmente durante a maré baixa. A partir desta caracterização química das águas foram identificadas condições prejudiciais aos ecossistemas aquáticos e potencial risco à saúde da população local que usa os rios para consumo, recreação e transporte.

Effect of lipid sources and inclusion levels in diets for broiler chickens

This research aimed to evaluate the interactions and effects of 2 and 4% addition levels of poultry slaughterhouse fat (chicken tallow) and soybean oil in diets for broiler chickens. Two experiments were carried out using one-day-old male Cobb chicks in an entirely random design with a 2x2 factorial scheme. In the first experiment, 560 chicks were used to evaluate performance and carcass characteristics. In the second experiment, 100 chicks were used to determine the nutrient digestibility, dietary energy utilization and the lipase and amylase pancreatic activity. There was no interaction between the fat sources and the addition levels for any of the analyzed variables, except for the digestibility coefficient of dry matter (DCDM), which was higher in diets added with 2% soybean oil when compared to chicken tallow. The addition of 4% fat in the diet, regardless of fat source, improved the digestibility coefficient of ethereal extract (DCEE) and increased weight gain and feed intake. Moreover, in the initial phase, the addition of 4% fat to the diet increased lipase activity when compared to diets with 2% addition, and a positive correlation between DCEE and pancreatic lipase activity was observed. In conclusion, there is no interaction between fat sources and addition levels, except for DCDM. Carcass characteristics are not influenced by any of the studied factors. The addition of 4% fat increases pancreatic lipase activity and improves DCEE, resulting in greater weight gain, regardless of the tested fat source, making chicken tallow a great alternative to soybean oil.

Fatty acid profile, carcass and meat quality traits of young Nellore bulls fed crude glycerin replacing energy sources in the concentrate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of ideal and non-ideal excitation sources on the dynamics of a nonlinear vibro-impact system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sources and levels of selenium on breast meat quality of broilers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Brewer's yeast and sugarcane yeast as protein sources for dogs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Different sources of forage with crude glycerin in diets with higher percentage of concentrate to beef cattle

Pós-graduação em Zootecnia - FCAV

Thermophilic fungi as new sources for production of cellulases and xylanases with potential use in sugarcane bagasse saccharification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The two faces of leuconostoc mesenteroides in food systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Different true-protein sources do not modify the metabolism of crossbred Bos taurus x Bos indicus growing heifers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Searches for heavy Higgs bosons in two-Higgs-doublet models and for t→ch decay using multilepton and diphoton final states in pp collisions at 8 TeV

Searches are presented for heavy scalar (H) and pseudoscalar (A) Higgs bosons posited in the two doublet model (2HDM) extensions of the standard model (SM). These searches are based on a data sample of pp collisions collected with the CMS experiment at the LHC at a center-of-mass energy of root s = 8 TeV and corresponding to an integrated luminosity of 19.5 fb(-1). The decays H -> hh and A -> Zh, where h denotes an SM-like Higgs boson, lead to events with three or more isolated charged leptons or with a photon pair accompanied by one or more isolated leptons. The search results are presented in terms of the H and A production cross sections times branching fractions and are further interpreted in terms of 2HDM parameters. We place 95% C.L. cross section upper limits of approximately 7 pb on sigma B for H -> hh and 2 pb for A -> Zh. Also presented are the results of a search for the rare decay of the top quark that results in a charm quark and an SM Higgs boson, t -> ch, the existence of which would indicate a nonzero flavor-changing Yukawa coupling of the top quark to the Higgs boson. We place a 95% C.L. upper limit of 0.56% on B(t -> ch).

Lensometry by two-laser holography with photorefractive Bi12TiO20

Refractive and profilometric measurements of lenses were performed through holography with a photorefractive Bi12TiO20 crystal as the recording medium. Two properly aligned diode lasers emitting in the red region were employed as light sources. Both lasers were tuned in order to provide millimetric and sub-millimetric synthetic wavelengths. The surfaces of the test lens were covered by a 25-μm opaque plastic tape in order to allow the lens profilometry upon illuminating them with a collimated beam. The resulting holographic images appear covered by interference fringes corresponding to the wavefront geometry of the wave scattered by the lens. For refractive index measurement a diffusely scattering flat surface was positioned behind the uncovered lens which was also illuminated by a plane wave. The resulting contour interferogram describes the form of the wavefront after the beam traveled back and forth through the lens. The fringe quantitative evaluation was carried out through the four-stepping technique and the resulting phase map and the Branch-cut method was employed for phase unwrapping. The only non-optical procedure for lens characterization was the thickness measurement, made by a dial caliper. Exact ray tracing calculation was performed in order to establish a relation between the output wavefront geometry and the lens parameters like radii of curvature, thickness and refractive index. By quantitatively comparing the theoretical wavefront geometry with the experimental results relative uncertainties bellow 3% for refractive index and 1 % for focal length were obtained. © 2008 American Institute of Physics.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Energy sources in the supplementation of beef cattle grazing Brachiaria brizantha cv. Xaraés

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)