Bacterial Pathogens Related to Chronic Suppurative Otitis Media in Individuals With Cleft Palate: Bacteriological Culture and Polymerase Chain Reaction

Objective: To characterize the microbial etiology of chronic suppurative otitis media comparing the methods of classical bacteriological culture and polymerase chain reaction.Design/Setting/Patients: Bacteriological analysis by classical culture and by molecular polymerase chain reaction of 35 effusion otitis samples from patients with cleft lip and palate attending the Hospital for Rehabilitation of Craniofacial Anomalies of the University of Sao Paulo, Bauru, Brazil.Interventions: Collection of clinical samples of otitis by effusion through the external auditory tube.Main Outcome Measure: Otolaryngologic diagnosis of chronic suppurative otitis media.Results: Positive cultures were obtained from 83% of patients. Among the 31 bacterial lineages the following were isolated. In order of decreasing frequency: Pseudomonas aeruginosa (54.9%), Staphylococcus aureus (25.9%), and Enterococcus faecalis (19.2%). No anaerobes were isolated by culture. The polymerase chain reaction was positive for one or more bacteria investigated in 97.1% of samples. Anaerobe lineages were detected by the polymerase chain reaction method, such as Fusobacterium nucleatum, Bacteroides fragilis, and Peptostreptococcus anaerobius.Conclusions: Patients with cleft lip and palate with chronic suppurative otitis media presented high frequency of bacterial infection in the middle ear. The classical bacteriological culture did not detect strict anaerobes, whose presence was identified by the polymerase chain reaction method.

Candidatus Liberibacter asiaticus Titers in Citrus and Acquisition Rates by Diaphorina citri Are Decreased by Higher Temperature

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of honey feeding by thyrinteina arnobia males and females on their reproduction and longevity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Postsurgical Alveolar Bone Graft Patients: Elaboration and Application of a Data-Gathering Instrument for Nutrition and Nursing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Photoelastic Analysis of Stress Distribution With Different Implant Systems

The aim of this study was to evaluate stress distribution with different implant systems through photoelasticity. Five models were fabricated with photoelastic resin PL-2. Each model was composed of a block of photoelastic resin (10 x 40 x 45 mm) with an implant and a healing abutment: model 1, internal hexagon implant (4.0 X 10 mm; Conect AR, Conexao, Sao Paulo, Brazil); model 2, Morse taper/internal octagon implant (4.1 x 10 mm; Standard, Straumann ITI, Andover, Mass); model 3, Morse taper implant (4.0 x 10 mm; AR Morse, Conexao); model 4, locking taper implant (4.0 x 11 mm; Bicon, Boston, Mass); model 5, external hexagon implant (4.0 x 10 mm; Master Screw, Conexao). Axial and oblique load (45) of 150 N were applied by a universal testing machine (EMIC-DL 3000), and a circular polariscope was used to visualize the stress. The results were photographed and analyzed qualitatively using Adobe Photoshop software. For the axial load, the greatest stress concentration was exhibited in the cervical and apical thirds. However, the highest number of isochromatic fringes was observed in the implant apex and in the cervical adjacent to the load direction in all models for the oblique load. Model 2 (Morse taper, internal octagon, Straumann ITI) presented the lowest stress concentration, while model 5 (external hexagon, Master Screw, Conexao) exhibited the greatest stress. It was concluded that Morse taper implants presented a more favorable stress distribution among the test groups. The external hexagon implant showed the highest stress concentration. Oblique load generated the highest stress in all models analyzed.

Use of Stress Analysis Methods to Evaluate the Biomechanics of Oral Rehabilitation With Implants

Because the biomechanical behavior of dental implants is different from that of natural tooth, clinical problems may occur. The mechanism of stress distribution and load transfer to the implant/bone interface is a critical issue affecting the success rate of implants. Therefore, the aim of this study was to conduct a brief literature review of the available stress analysis methods to study implant-supported prosthesis loading and to discuss their contributions in the biomechanical evaluation of oral rehabilitation with implants. Several studies have used experimental, analytical, and computational models by means of finite element models (FEM), photoelasticity, strain gauges and associations of these methods to evaluate the biomechanical behavior of dental implants. The FEM has been used to evaluate new components, configurations, materials, and shapes of implants. The greatest advantage of the photoelastic method is the ability to visualize the stresses in complex structures, such as oral structures, and to observe the stress patterns in the whole model, allowing the researcher to localize and quantify the stress magnitude. Strain gauges can be used to assess in vivo and in vitro stress in prostheses, implants, and teeth. Some authors use the strain gauge technique with photoelasticity or FEM techniques. These methodologies can be widely applied in dentistry, mainly in the research field. Therefore, they can guide further research and clinical studies by predicting some disadvantages and streamlining clinical time.

Eight-Year Follow-Up of a Fixed-Detachable Maxillary Prosthesis Utilizing an Attachment System: Clinical Protocol for Individuals With Skeletal Class III Malocclusions

The aim of this article is to describe a successful clinical protocol for prosthodontic rehabilitation of a patient with a skeletal Class III malocclusion using a fixed-detachable maxillary prosthesis supported by 6 implants and the MK1 attachment system. The patient was followed up for 8 years. A 46-year-old edentulous woman with a skeletal Class III malocclusion expressed dissatisfaction with her old existing maxillary denture from an esthetic point of view and frustration regarding its function. A fixed-detachable maxillary prosthesis using the MK1 attachment system was made. The patient was followed up clinically and radiographically for 8 years. No bone loss, fracture of prosthetic components, or fracture of the prosthesis was detected in that period. A fixed detachable maxillary prosthesis using the MK1 attachment system is a treatment option for patients with Class III malocclusions who opt not to undergo orthognathic surgery.

Calvarial Autogenous Bone Graft for Maxillary Ridge and Sinus Reconstruction for Rehabilitation With Dental Implants

Autogenous bone grafting is the gold-standard technique for bone augmentation procedures prior to implant placement. If the amount of available intraoral donor bone is insufficient, it is necessary to harvest bone graft from extraoral sites, such as calvaria. Although this technique is well established, only a few case reports show the histological analysis of the grafted bone at the moment of implant placement. This article reports the case of a 48-year-old female patient with a critical atrophic maxillary ridge reconstructed using autogenous calvarial bone graft prior to implant placement, with clinical and histological evaluation. Bone was collected under general anesthesia from the parietal bone. The outer cortical originated the bone blocks, and the medullar bone layer between was collected to be used in the sinus augmentation procedure, together with 5 of the bone blocks triturated. Six months after bone augmentation, 8 implants were placed in the grafted area and 2 biopsies were retrieved (anterior and the posterior regions), allowing the visualization of the bone-remodeling process in the grafted areas. The patient had a stable recovery. Our results showed that although necrotic bone could still be seen in the outer layer of the grafted area, the interface between this necrotic bone and the already remodeled bone was consistent with biocompatibility. Two-year radiographic evaluation showed success of the grafts and the implants in supporting an esthetic and functionally stable prosthesis. Summarizing, calvarial bone grafts are a viable alternative for the attainment of adequate bone volume prior to implant placement.

Piezosurgery Applied to Implant Dentistry: Clinical and Biological Aspects

Piezosurgery is a new and modern technique of bone surgery in implantology. Selective cutting is possible for different ultrasonic frequencies acting only in hard tissues (mineralized), saving vital anatomical structures. With the piezoelectric osteotomy technique, receptor site preparation for implants, autogenous bone graft acquistition (particles and blocks), osteotomy for alveolar bone crest expansion, maxillary sinus lifting, and dental implant removal can be performed accurately and safely, providing excellent clinical and biological results, especially for osteocyte viability. The aim of this review was, through literature review, to present clinical applications of piezosurgery in implant dentistry and outline their advantages and disadvantages over conventional surgical systems. Moreover, this study addressed the biological aspects related to piezosurgery that differentiate it from those of bone tissue approaches. Overall, piezosurgery enables critical operations in simple and fully executable procedures; and effectively, areas that are difficult to access have less risk of soft tissue and neurovascular tissue damage via piezosurgery.

Utilization of Ethyl Cyanoacrylate and 2-Octyl Cyanoacrylate Adhesives for Autogenous Bone Graft Fixation: Histomorphometric Study in Rats

The present study analyzes the repair process of autogenous bone graft in a block fixed with ethyl cyanoacrylate and 2-octyl cyanoacrylate adhesives in rat calvaria. Forty-eight rats, divided into 3 groups, received round osteotomies at the right parietal bone for the attainment of autogenous bone graft fragment, which was fixed at the opposite side to the donor site with ethyl cyanoacrylate (ethyl group) and 2-octyl cyanoacrylate (octyl group) adhesives. In the control group, bone fragment was only juxtaposed at the parietal bone surface without any fixation material. The animals were euthanized after 10 and 60 postoperative days. The calvariae were processed in a laboratory for the attainment of slides stained through the hematoxylin and eosin technique for histological and histometric analysis. The qualitative analysis showed a discrete inflammatory infiltrate in the control group and moderate inflammatory infiltrate in the ethyl and octyl groups at the 10-day period, which remained at the 60-day period, mainly in the octyl group. The bone fragment remained bonded to the recipient site through the adhesive, but graft incorporation was not observed in any of the specimens. Resorption was higher in the octyl group followed by the ethyl and control groups, both at the 10-and 60-day periods, but with no statistical significance (P < .05). Although promoting graft fixation and its maintenance at the recipient site, both studied adhesives did not allow the graft incorporation, producing a localized and discrete inflammatory reaction, which persisted at 60 days, being more intense in the octyl cyanoacrylate group.

Repair Technique for Fractured Implant-Supported Metal-Ceramic Restorations: A Clinical Report

The fracture of porcelain structures have been related in either natural dentition or implant-supported restorations. Techniques using a composite resin or indirect methods can be used. This article presents a porcelain fracture on implant-supported metal-ceramic restoration. IPS Empress e.max laminate veneer restoration was used to repair the fracture. With this technique, it was possible to restore aesthetics and function, combined with low cost and patient satisfaction.

Effect of platelet-rich plasma on the healing of mandibular defects treated with fresh frozen bone allograft: a radiographic study in dogs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

GASTROPOD SHELLS USED BY Dardanus insignis (Decapoda, Anomura) NEAR ISLANDS IN THE UBATUBA REGION, SAO PAULO, BRAZIL

The use of gastropod shells by hermit crabs is determined by the availability of shells in the environment or through selection for size and volume. This study analyzed patterns in the use of shells by Dardanus insignis (Saussure, 1858). From January 1998 to December 1999, 386 individuals were collected from two islands at Ubatuba, Sao Paulo. The crabs were measured for cephalothoracic shield length (CSL) and wet weight (CWW). The gastropod shells occupied by hermit crabs were identified, and the shell aperture width (SAW), dry weight (SDW) and internal volume (STY) were measured. The relationships between the dimensions of the gastropod shell and the hermit crabs were evaluated by linear regression analysis. Among the 11 species of gastropod shells used by D. insignis, the most often used was Olivancillaria urceus (31%), followed by Strombus pugilis (22%) and Siratus tenuivaricosus (18%). The shell of O. urceus was used most probably due to its high availability on Couves and Mar Virado islands. The most significant biometric parameter was shell aperture width (F=18.231; p<0.0001), highlighting the importance of this variable for the shell choice by D. insignis at both sites.

As Virgens Marias da Nova Espanha e do Arcebispado de Lima durante os séculos XVI e XVII: entre a idolatria e a santidade

Pós-graduação em História - FCHS