Les Plus Anciens Mastodontes Tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la Tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet genetically separated beyond fertile cross-breeding, i.e. beyond species' level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus'ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but significant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Notes sur la géologie et la paleontology du Miocène de Lisbonne; (XX) les plus anciens mastodontes tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet geneticaliy separated beyond fertile cross-breeding, i.e. beyond species'level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus' ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but signifiant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Fractional generalization of memristor and higher order elements

Fractional calculus generalizes integer order derivatives and integrals. Memristor systems generalize the notion of electrical elements. Both concepts were shown to model important classes of phenomena. This paper goes a step further by embedding both tools in a generalization considering complex-order objects. Two complex operators leading to real-valued results are proposed. The proposed class of models generate a broad universe of elements. Several combinations of values are tested and the corresponding dynamical behavior is analyzed.

Quelques mastodontes miocènes du Portugal

From a paleontological point of view previous determinations for some specimens as Tetralophodon longirostris can be confirmed from Azambujeira (upper level), Valverde and Vale de Matança. A so far undescribed and rare D3 (from Azambujeira, middle level) has been studied. For the first time in Portugal a Gomphotherium angustidens transitional to «Tetralophodon» grandincisivus is reported (from Portas do Sol). Teeth from Lisbon formerly reported (in part) to T. longirostris are now ascribed to G. angustidens. The presence of T. longirostris at Vale de Matança excludes a Pliocene age for Marateca Formation. This and some other evidence clearly points out towards an early Vallesian age. G. angustidens transitional to T. grandincisivus found at Portas do Sol is enough to ascribe this locality to the latest Middle Miocene or earliest Upper Miocene. Therefore it is possible to correlate overlying Santarém limestones to the Vallesian Cartaxo and Almoster ones which are better dated.

Contributos do otimismo para a empregabilidade: boas práticas de acolhimento e integração

Foi no âmbito da realização da investigação, que tem como propósito geral contribuir para o conhecimento na área de Recursos Humanos, que efetuamos este estudo definindo como tema os contributos do Otimismo e Adaptabilidade para a Empregabilidade. Tem como objetos de estudo as práticas de Acolhimento & Integração das Pessoas no Grupo Valpi e de que forma o otimismo, reforça e se correlaciona com esse processo. Adicionalmente, procura avaliar o nível de empregabilidade dos seus colaboradores na sua dimensão da adaptabilidade pessoal, especialmente o papel do otimismo, tendo como base o modelo de Fugate, Kinicki e Ashforth (2004). A metodologia de investigação seguiu uma abordagem metodológica mista, por inquérito de pesquisa quantitativa e qualitativa, com recurso à utilização de instrumentos de recolha de dados, respetivamente, por questionário e por entrevista, utilizando a técnica de grupo de discussão focalizada. O questionário de escala de resposta do tipo Likert já existente, suportando o modelo de investigação proposto e as variáveis em estudo, foi aplicado a uma amostra intencional da população, por conveniência e aleatória. Foram inquiridos cem participantes por questionário e participaram cinco elementos no grupo de discussão focalizada, tendo sido neste caso escolhido uma amostra por conveniência e não aleatória, com interlocutores privilegiados da empresa. Os dados deste estudo permitem-nos concluir que o otimismo é uma variável relevante quer do ponto de vista da organização, quer do ponto de vista do individuo.

A vision of cyber-physical internet

When the Internet was born, the purpose was to interconnect computers to share digital data at large-scale. On the other hand, when embedded systems were born, the objective was to control system components under real-time constraints through sensing devices, typically at small to medium scales. With the great evolution of the Information and Communication Technology (ICT), the tendency is to enable ubiquitous and pervasive computing to control everything (physical processes and physical objects) anytime and at a large-scale. This new vision gave recently rise to the paradigm of Cyber-Physical Systems (CPS). In this position paper, we provide a realistic vision to the concept of the Cyber-Physical Internet (CPI), discuss its design requirements and present the limitations of the current networking abstractions to fulfill these requirements. We also debate whether it is more productive to adopt a system integration approach or a radical design approach for building large-scale CPS. Finally, we present a sample of realtime challenges that must be considered in the design of the Cyber-Physical Internet.

Quality-of-service in wireless sensor networks: state-of-the-art and future directions

Wireless sensor networks (WSNs) are one of today’s most prominent instantiations of the ubiquituous computing paradigm. In order to achieve high levels of integration, WSNs need to be conceived considering requirements beyond the mere system’s functionality. While Quality-of-Service (QoS) is traditionally associated with bit/data rate, network throughput, message delay and bit/packet error rate, we believe that this concept is too strict, in the sense that these properties alone do not reflect the overall quality-ofservice provided to the user/application. Other non-functional properties such as scalability, security or energy sustainability must also be considered in the system design. This paper identifies the most important non-functional properties that affect the overall quality of the service provided to the users, outlining their relevance, state-of-the-art and future research directions.

Elements of scalable data processing

Cooperating objects (COs) is a recently coined term used to signify the convergence of classical embedded computer systems, wireless sensor networks and robotics and control. We present essential elements of a reference architecture for scalable data processing for the CO paradigm.

Interactive light and sound table: an EPS@ISEP project

Interactive products are appealing objects in a technology-driven society and the offer in the market is wide and varied. Most of the existing interactive products only provide either light or sound experiences. Therefore, the goal of this project was to develop a product aimed for children combining both features. This project was developed by a team of four thirdyear students with different engineering backgrounds and nationalities during the European Project Semester at ISEP (EPS@ISEP) in 2012. This paper presents the process that led to the development of an interactive sound table that combines nine identical interaction blocks, a control block and a sound block. Each interaction block works independently and is composed of four light emitting diodes (LED) and one infrared (IR) sensor. The control is performed by an Arduino microcontroller and the sound block includes a music shield and a pair of loud speakers. A number of tests were carried out to assess whether the controller, IR sensors, LED, music shield and speakers work together properly and if the ensemble was a viable interactive light and sound device for children.

Monitoring chlorophyll-a with remote sensing techniques in the Tagus Estuary

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Gestão e Sistemas Ambientais

Design and implementation of a behaviorally typed programming system for web services

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática.

Smart environment technology as a possible enabler of smart cities

This paper discusses the technology of smart floors as a enabler of smart cities. The discussion will be based on technology that is embedded into the environment that enable location, navigation but also wireless power transmission for powering up elements siting on it, typically mobile devices. One of those examples is the smart floor, this implementation follows two paths, one where the floor is passive, and normally passive RFID's are embedded into the floor, they are used to provide intelligence into the surrounding space, this is normally complemented with a battery powered mobile unit that scans the floor for the sensors and communicates the information to a database which locates the mobile device in the environment. The other path for the smart city enabler is where the floor is active and delivers energy for the objects standing on top of it. In this paper these two approaches will be presented, by discussing the technology behind it. © 2014 IEEE.

Uranium glass in museum collections

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro Área de especialização – Vidro

Orchestration of heterogeneous middleware services and its application to a comand and control platform

MSC Dissertation in Computer Engineering