Effect of root zone temperature on oilseed rape (Brassica napus) response to boron

Oilseed rape (Brassica napus) is sensitive to low boron (B) supply, and its growth response to B may be influenced by soil temperature. To test the relationship between B and temperature, oilseed rape (cv. Hyola 42) seedlings were grown at 10 degrees C (low) root zone temperature (RZT) with B supply from deficient to adequate B levels until growth of low B plants just began to slow down. Half of the pots were then transferred to 20 degrees C (warm) RZT for 11 days before they were moved back to 10 degrees C RZT for the final 4 days. Both plant dry mass and B uptake increased after plants were exposed to warm RZT. However, plant B deficiency was exacerbated by warm RZT in low B plants because of increased relative growth rate and shoot-root ratio without a commensurate increase in B uptake rate. It is concluded that RZT above the critical threshold for chilling injury in oilseed rape can nevertheless affect the incidence of B deficiency by altering shoot-root ratio and hence the balance between shoot B demand and B uptake.

An automated failure mode and effect analysis based on high-level design specificication with behavior trees

Formal methods have significant benefits for developing safety critical systems, in that they allow for correctness proofs, model checking safety and liveness properties, deadlock checking, etc. However, formal methods do not scale very well and demand specialist skills, when developing real-world systems. For these reasons, development and analysis of large-scale safety critical systems will require effective integration of formal and informal methods. In this paper, we use such an integrative approach to automate Failure Modes and Effects Analysis (FMEA), a widely used system safety analysis technique, using a high-level graphical modelling notation (Behavior Trees) and model checking. We inject component failure modes into the Behavior Trees and translate the resulting Behavior Trees to SAL code. This enables us to model check if the system in the presence of these faults satisfies its safety properties, specified by temporal logic formulas. The benefit of this process is tool support that automates the tedious and error-prone aspects of FMEA.

Understanding city fringe gentrification: The role of a potential investment gap

Discussion of gentrification has become ‘balkanised’ into a series of competing and intensely-held positions. The dichotomies are between economic and cultural explanations, supply-side and demand-side explanations and structural Marxist and liberal humanist views. Despite the long academic and policy interest in gentrification there is still no clear definition of what it is and why it occurs. However, almost all previous analyses see gentrification as an inner-city phenomenon and so deal with it within framework of inner-city theory and causation. This paper approaches the debate from a somewhat different position. It argues that gentrification, seen as the replacement of lower status and income households by higher status and income households, can occur outside the inner city. It uses clear cases of gentrification on the urban fringe of metropolitan Brisbane in South East Queensland, to explore mechanisms and explanations. The key to this ‘gentrification by the sea’ is a ‘potential investment gap’ between current and potential future property values, based on increasing demand for a limited locational resource – but instead of this being inner-city properties it is waterside land in a regional facing rapid population increase. The paper also draws attention to the inadequate recognition of the roles of the state and the media in previous analyses of gentrification.

The agricultural water supply challenge - the need for improved water use efficiency

This paper examines the challenges of water supply in agriculture, with particular emphasis on requirements of field crops, including maize. It places the issue of water supply to agriculture in the context of increasing demands for water from alternatives users, declining quality water, pressure of increasing population, all of which are placing stresses on water availability at local, regional and national levels. The paper also examines existing freshwater resources and the potential impact of climate change on water supply and distribution and consequential impact on water stress incidence in various parts of the globe. It examines competition for water in both industrialized and developing countries, with particular emphasis on the impacts on agriculture and food supplies. The challenge of water use efficiency (WUE) in agriculture is explored with discussion of agronomic, economic and physiological WUE concepts, with specific reference to maize.

Assessing service satisfaction between a 3PL provider and a vehicle manufacturer using the SERVQUAL technique

This paper reports on a new study conducted within a leading UK based (and US owned) car manufacturing company looking at the satisfaction between parties within a newly formed third party logistics (3PL) relationship. The study contains a two-way assessment of the relationship (i.e. the vehicle manufacturer’s Parts Supply and Logistics Operation’s assessment of the 3PL’s service and the 3PL’s assessment of the vehicle manufacturer’s relationship management ability). The study principally used an online SERVQUAL survey, (backed up with an on-line questionnaire, and face to face interviews) for data collection. The paper discusses the background and problems that have arisen in the relationship, the analysis of how each of the parties sees one other in terms of the service provided. Also, the findings and recommendations presented to management are outlined: these include factors such as the need for information sharing, reliability, flexibility, role specificity, trust and effective requirements management.

Retail restructuring and consumer choice 1:long term local changes in consumer behaviour : Portsmouth 1980-2002

Over the last two decades fundamental changes have taken place in the global supply and local structure of provision of British food retailing. Consumer lifestyles have also changed markedly. Despite some important studies of local interactions between new retail developments and consumers, we argue in this paper that there is a critical need to gauge the cumulative effects of these changes on consumer behaviour over longer periods. In this, the first of two papers, we present the main findings of a study of the effects of long-term retail change on consumers at the local level. We provide in this paper an overview of the changing geography of retail provision and patterns of consumption at the local level. We contextualise the Portsmouth study area as a locality that typifies national changes in retail provision and consumer lifestyles; outline the main findings of two large-scale surveys of food shopping behaviour carried out in 1980 and 2002; and reveal the impacts of retail restructuring on consumer behaviour. We focus in particular on choice between stores at the local level and end by problematising our understanding of how consumers experience choice, emphasising the need for qualitative research. This issue is then dealt with in our complementary second paper, which explores choice within stores and how this relates to the broader spatial context.

Traffic based energy consumption optimisation to improve the lifetime and performance of ad hoc wireless sensor networks

Ad hoc wireless sensor networks (WSNs) are formed from self-organising configurations of distributed, energy constrained, autonomous sensor nodes. The service lifetime of such sensor nodes depends on the power supply and the energy consumption, which is typically dominated by the communication subsystem. One of the key challenges in unlocking the potential of such data gathering sensor networks is conserving energy so as to maximize their post deployment active lifetime. This thesis described the research carried on the continual development of the novel energy efficient Optimised grids algorithm that increases the WSNs lifetime and improves on the QoS parameters yielding higher throughput, lower latency and jitter for next generation of WSNs. Based on the range and traffic relationship the novel Optimised grids algorithm provides a robust traffic dependent energy efficient grid size that minimises the cluster head energy consumption in each grid and balances the energy use throughout the network. Efficient spatial reusability allows the novel Optimised grids algorithm improves on network QoS parameters. The most important advantage of this model is that it can be applied to all one and two dimensional traffic scenarios where the traffic load may fluctuate due to sensor activities. During traffic fluctuations the novel Optimised grids algorithm can be used to re-optimise the wireless sensor network to bring further benefits in energy reduction and improvement in QoS parameters. As the idle energy becomes dominant at lower traffic loads, the new Sleep Optimised grids model incorporates the sleep energy and idle energy duty cycles that can be implemented to achieve further network lifetime gains in all wireless sensor network models. Another key advantage of the novel Optimised grids algorithm is that it can be implemented with existing energy saving protocols like GAF, LEACH, SMAC and TMAC to further enhance the network lifetimes and improve on QoS parameters. The novel Optimised grids algorithm does not interfere with these protocols, but creates an overlay to optimise the grids sizes and hence transmission range of wireless sensor nodes.

Achieving cost competitiveness with an agent based integrated process planning and production scheduling system

From a manufacturing perspective, the efficiency of manufacturing operations (such as process planning and production scheduling) are the key element for enhancing manufacturing competence. Process planning and production scheduling functions have been traditionally treated as two separate activities, and have resulted in a range of inefficiencies. These include infeasible process plans, non-available/overloaded resources, high production costs, long production lead times, and so on. Above all, it is unlikely that the dynamic changes can be efficiently dealt with. Despite much research has been conducted to integrate process planning and production scheduling to generate optimised solutions to improve manufacturing efficiency, there is still a gap to achieve the competence required for the current global competitive market. In this research, the concept of multi-agent system (MAS) is adopted as a means to address the aforementioned gap. A MAS consists of a collection of intelligent autonomous agents able to solve complex problems. These agents possess their individual objectives and interact with each other to fulfil the global goal. This paper describes a novel use of an autonomous agent system to facilitate the integration of process planning and production scheduling functions to cope with unpredictable demands, in terms of uncertainties in product mix and demand pattern. The novelty lies with the currency-based iterative agent bidding mechanism to allow process planning and production scheduling options to be evaluated simultaneously, so as to search for an optimised, cost-effective solution. This agent based system aims to achieve manufacturing competence by means of enhancing the flexibility and agility of manufacturing enterprises.

Uptake of dental services

Previous research has indicated that the majority of the UK dentate population suffers from dental disease. This problem was examined in terms of the supply of, and demand for, dental treatment: how might the uptake of dental services be increased and dental health improved? The target population for the main survey was adolescents among whom demand for dental treatment has decreased. In 524 adolescents surveyed, fear of pain was the major deterrent to regular dental visits. The theoretical literature was explored for illuminating and practical approaches to the problem. The theory of reasoned action developed by Fishbein seemed the most promising. This theory was tested and validated on the adolescent sample identifying clear differences between regular and irregular dental attenders which could be usefully exploited by dental health education. A repertory grid analysis study further illuminated perceptions of dental treatment. A survey of a random sample of 716 dentists revealed that most dentists were in favour of delegating work to auxiliary help but few could do so. Auxiliary help would increase supply of services: data revealed an encouraging trend for younger dentists to be more in favour of delegation than older dentists. A survey was carried out of computer systems available for dentists suggesting that this might reduce the need for clerical assistance but would not ususally affect the supply of treatment. However in some dental practices computerisation might increase demand. For example a personalised reminder was developed and evaluated in a controlled study of 938 appointments demonstrating an uptake in dental services. Conclusions are that demand for treatment can be increased in various ways especially by teaching dentists' behavioural strategies to deal with fear and pain. Various recommendations on this are made. If demand were to outstrip supply increased delegation to auxiliary help could provide a viable way of increasing supply.

The development and diffusion of industrial robots

This thesis describes the history of robots and explains the reasons for the international differences in robot diffusion, and the differences in the diffusion of various robot applications with reference to the UK. As opposed to most of the literature, diffusion is examined with an integrated and interdisciplinary perspective. Robot technology evolves from the interaction of development, supply and manufacture, adoption, and promotion. activities. Emphasis is given to the analysis of adoption, at present the most important limiting factor of robot advancement in the UK. Technical development is inferred from a comparison of surveys on equipment, and from the topics of ten years of symposia papers. This classification of papers is also used to highlight the international and institutional differences in robot development. Analysis of the growth in robot supply, manufacture, and use is made from statistics compiled. A series of interviews with users and potential users serves to illustrate the factors and implications of the adoption of different robot systems in the UK. Adoption pioneering takes place when several conditions exist: when the technology is compatible with the firm, when its advantages outweigh its disadvantages, and particularly when a climate exists which encourages the managerial involvement and the labour acceptance. The degree of compatibility (technical, methodological, organisational, and economic) and the consequences (profitability, labour impacts, and managerial effects) of different robot systems (transfer, manipulative, processing, and assembly) are determined by various aspects of manufacturing operations (complexity, automation, integration, labour tasks, and working conditions). The climate for adoption pioneering is basically determined by the performance of firms. The firms' policies on capital investment have as decisive a role in determining the profitability of robots as their total labour costs. The performance of the motor car industry and its machine builders explains, more than any other factor, the present state of robot advancement in the UK.

Pyrolysis liquids and gases as alternative fuels in internal combustion engines:a review

Liquids and gases produced through biomass pyrolysis have potential as renewable fuels to replace fossil fuels in conventional internal combustion engines. This review compares the properties of pyrolysis fuels, produced from a variety of feedstocks and using different pyrolysis techniques, against those of fossil fuels. High acidity, the presence of solid particles, high water content, high viscosity, storage and thermal instability, and low energy content are typical characteristics of pyrolysis liquids. A survey of combustion, performance and exhaust emission results from the use of pyrolysis liquids (both crude and up-graded) in compression ignition engines is presented. With only a few exceptions, most authors have reported difficulties associated with the adverse properties of pyrolysis liquids, including: corrosion and clogging of the injectors, long ignition delay and short combustion duration, difficulty in engine start-up, unstable operation, coking of the piston and cylinders and subsequent engine seizure. Pyrolysis gas can be used more readily, either in spark ignition or compression ignition engines; however, NO reduction techniques are desirable. Various approaches to improve the properties of pyrolysis liquids are discussed and a comparison of the properties of up-graded vs. crude pyrolysis liquid is included. Further developments in up-gradation techniques, such as hydrocracking and bio-refinery approaches, could lead to the production of green diesel and green gasoline. Modifications required to engines for use with pyrolysis liquids, for example in the fuel supply and injection systems, are discussed. Storage stability and economic issues are also reviewed. Our study presents recent progress and important R&D areas for successful future use of pyrolysis fuels in internal combustion engines.

Rethinking policy options for industry:Appropriateness of policies for industry and UK farming and food

Purpose - Studies the implementation of lean supply and partnership relationships in the UK food and farming industry to assess if these types of interventions are effective. Design/methodology/approach - Reviews the challenges affecting the UK supply chain for red meat. Describes the initiatives that were set up to develop a lean supply chain management approach and examines their application in the UK pig and beef industries. Assesses if these changes benefited all participants in the supply chains. Uses semi-structured interviews with key actors in each stage of the supply chain to do this, identifying the power relations within the supply chains and how these affected the outcomes for those participating in the chain. Findings - Concludes that lean initiatives were appropriate for the pig industry but were of limited value for the beef industry. Even within the pig industry, highlights that benefits were not shared equally, with producers, in particular, losing out. Lastly, points out that lean supply chain management is unlikely to be appropriate operationally and commercially in all circumstances in one industry. Argues for a differentiated policy approach and sets out a framework which enables decision makers to select industrial policy options. Research limitations/ implications - Describes the analysis and the framework developed from it. Originality/value - Assesses the effectiveness of lean supply chain management.

A strategic case for e-adoption in healthcare supply chains

A growing body of literature suggests that greater benefits of e-business will be obtained when e-business is integrated throughout a supply chain. However, organizations are still cautious in adopting e-business technologies. This paper examines whether a strategic case for e-commerce can be recognised and the factors that influence e-adoption, using e-business development models, a contingency approach and a stakeholder approach. The paper explores the link of e-commerce with strategy and the potential strategic benefits, risks and problems. This paper analysed e-adoption in four diverse healthcare supply chains in the context of the English National Health Service (NHS). The fieldwork showed there is of limited use of e- in supply chains; there are key problems associated with perceived benefits and costs by different actors both within organisations and within the chain. The paper proposes a framework to link the case for e-commerce with the achievement of strategic objectives across three inter-related domains—health, supply and business.

Coverage versus supply cost in facility location:physics of frustrated spin systems

A comprehensive coverage is crucial for communication, supply, and transportation networks, yet it is limited by the requirement of extensive infrastructure and heavy energy consumption. Here, we draw an analogy between spins in antiferromagnet and outlets in supply networks, and apply techniques from the studies of disordered systems to elucidate the effects of balancing the coverage and supply costs on the network behavior. A readily applicable, coverage optimization algorithm is derived. Simulation results show that magnetized and antiferromagnetic domains emerge and coexist to balance the need for coverage and energy saving. The scaling of parameters with system size agrees with the continuum approximation in two dimensions and the tree approximation in random graphs. Due to frustration caused by the competition between coverage and supply cost, a transition between easy and hard computation regimes is observed. We further suggest a local expansion approach to greatly simplify the message updates which shed light on simplifications in other problems. © 2014 American Physical Society.

Designing an E-Mail Prototype to Enhance Effective Communication and Task Management: A Case Study

This paper deals with communicational breakdowns and misunderstandings in computer mediated communication (CMC) and ways to recover from them or to prevent them. The paper describes a case study of CMC conducted in a company named Artigiani. We observed communication and conducted content analysis of e-mail messages, focusing on message exchanges between customer service representatives (CSRs) and their contacts. In addition to task management difficulties, we identified communication breakdowns that result from differences between perspectives, and from the lack of contextual information, mainly technical background and professional jargon at the customers’ side. We examined possible ways to enhance CMC and accordingly designed a prototype for an e-mail user interface that emphasizes a communicational strategy called contextualization as a central component for obtaining effective communication and for supporting effective management and control of organizational activities, especially handling orders, price quoting, and monitoring the supply and installation of products.