Fatigue capacity of cold-formed steel roof battens under cyclic wind uplift loads

Steel roofs made of thin cold-formed steel roof claddings and battens are widely used in low-rise residential and industrial buildings all around the world. However, they suffer from premature localised pull-through failures in the batten to rafter connections during high wind events. A recent study proposed a suitable design equation for the pull-through failures of thin steel roof battens. However, it was limited to static wind uplift loading. In contrast, most cyclone/storm events produce cyclic wind uplift forces on roofs for a significantly long period, thus causing premature fatigue pull-through failures at lower loads. Therefore, a series of constant amplitude cyclic load tests was conducted on small and full scale roof panels made of a commonly used industrial roof batten to develop their S-N curves. A series of multi-level cyclic tests, including the recently introduced low-high-low (LHL) fatigue loading test, was also undertaken to simulate a design cyclone. Using the S-N curves, the static pull-through design capacity equation was modified to include the effects of fatigue. Applicability of Miner’s rule was evaluated in order to predict the fatigue damage caused by multi-level cyclic tests such as the LHL test, and suitable modifications were made. The combined use of the modified Miner’s law and the S-N curve of roof battens will allow a conservative estimation of the fatigue design capacity of roof battens without conducting the LHL tests simulating a design cyclone. This paper presents the details of this study, and the results.

Fritz Gottschalk and his children boating on a mountain lake; Titisee, Germany.

From left to right: Ursula, Walter, Hal, Kurt, Fritz, and Elizabeth Gottschalk; the lake is probably the Titisee near the Swiss border in the Black Forest, Germany

Children portrait of Walter Gottschalk and Ursula Gottschalk.

The picture was probably taken in Hannover, Germany

Portrait of the six Gottschalk children Walter, Ursula, Freddy, Hal, Elizabeth and Kurt in garden; Hannover, Germany. Portraits Children

Front row from left to right: Walter, Ursula, and Freddy; back row from left to right: Hal, Elizabeth, and Kurt Godshaw; picture was probably taken in their backyard on Seelhorststrasse in Hannover, Germany

Portrait of the six Gottschalk children Walter, Ursula, Freddy, Hal, Elizabeth and Kurt in garden; Hannover, Germany. Portraits children

Front row from left to right: Walter, Ursula, and Freddy; back row from left to right: Hal, Elizabeth, and Kurt Godshaw; picture was probably taken in their backyard on Seelhorststrasse in Hannover, Germany

Walter, Ilse, Freddy, Ursula, and Rudolf Gottschalk with Edith Braunschweig in costumes dancing to a minuet for the 80th birthday celebration of Henriette Gottschalk; Hannover, Germany. Portraits Children

On 5 Oct 1929 the family got together in Hannover to celebrate the 80th Birthday of Henrietta Gottschalk nee Rothschild where the children danced a minuet by Beethoven or Mozart; left to right: Grandniece Edith Braunschweig, Walter Gottschalk, Ilse Gottschalk, Freddy Gottschalk, Ursula Gottschalk, and Rudolf Gottschalk

Gottschalk family in the park; Hannover, Germany. Portraits Family

Left to right: Therese Godshaw (Gottschalk) nee Molling, Walter, Freddy, Grandmother Henriette Gottschalk nee Rothschild, Ursula, Hal and Kurt

Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion

Electroslag refining is a useful remelting process by which clean steels can be produced for sophisticated applications. In this investigation, AISI 4340 steel has been electroslag refined and the improvement in its hot ductility has been assessed using hot torsion tests; electroslag refining has improved the hot ductility considerably. The temperature at which peak ductility is obtained has also increased — from 1473 K in the unrefined steel to 1573 K in ESR steel. Results indicate that it should be possible to subject the ESR ingot to much higher strains per unit operation during industrial hot working processes such as forging, which would result in a considerable saving of power. The improvement in hot ductility in ESR steel has been attributed primarily to the removal of non-metallic inclusions and the reduction in sulphur content. From the apparent activation energy estimated from the hot torsion data, the dynamic recrystallization process is identified as the mechanism controlling the rate of hot deformation.

Gottschalk children on vacation at a mountain lake; Titisee, Germany.

Front left to right: Ursula and Walter; back left to right: Kurt, Elizabeth, and Hal

Fritz Gottschalk and his children boating on a mountain lake; Titisee, Germany.

From left to right: Ursula, Walter, Hal, Kurt, Fritz, and Elizabeth Gottschalk; the lake is probably the Titisee near the Swiss border in the Black Forest, Germany

Gottschalk family on vacation; Norderney, Germany.

Left to right: two unidentified women, Kurt Gottschalk, Therese Gottschalk nee Molling, Fritz Gottschalk, unidentified woman (the maid?), and Elizabeth Gottschalk

Controlling fly strike and louse infections in sheep with tea tree oil

This study aimed to assess the effect of tea tree oil based formulations against two major ectoparasitic diseases in the sheep industry, flystrike and louse infestation, and to provide data to assist the assessment of the commercial feasibility of development of tea tree oil based ectoparasiticides. The results demonstrate insecticidal effects against both sheep lice and blowflies and repellent effects against adult flies and maggots. Dipping sheep in a Tea Tree Oil based formulation appeared to completely eradicate lice and suggests its potential use in sheep dipping formulations. Repellent and insecticidal effects against sheep blowflies, together with previously reported anti-microbial and wound healing properties, suggest significant benefits from the inclusion of tea tree oil in flystrike and wound treatment formulations. These effects occurred at concentrations of Tea Tree Oil that suggest the commercial viability of development of Tea Tree Oil based formulations for sheep parasite control and wound treatment and a potential new market for Tea Tree Oil.

Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters

In the present investigation, experiments were conducted on a tribological couple-copper pin against steel plate-using an inclined pin-on-plate sliding tester to understand the role of surface texture and roughness parameters of the plate on the coefficient friction and transfer layer formation. Two surface characteristics of the steel plates-roughness and texture-were varied in the tests. It was observed that the transfer layer formation and the coefficient of friction along with its two components, namely, the adhesion and plowing, are controlled by the surface texture of the plate. The plowing component of friction was highest for the surface texture that promotes plane strain conditions while it was lowest for the texture that favors plane stress conditions at the interface. Dimensionless quantifiable roughness parameters were formulated to describe the degree of plowing and hence the plane strain/stress type deformations taking place at the asperity level.

U.S. Army Passover Seder; Hawaii Portraits Groups

Digital Image

Dr. William Levison (seated, far left) with other U.S. Army medial doctors and nurses with Christmas Tree in background Portraits Groups

Digital Image