Social exclusion and social capital: A comparison and critique

Social exclusion and social capital are widely used concepts with multiple and ambiguous definitions. Their meanings and indicators partially overlap, and thus they are sometimes used interchangeably to refer to the inter-relations of economy and society. Both ideas could benefit from further specification and differentiation. The causes of social exclusion and the consequences of social capital have received the fullest elaboration, to the relative neglect of the outcomes of social exclusion and the genesis of social capital. This article identifies the similarities and differences between social exclusion and social capital. We compare the intellectual histories and theoretical orientations of each term, their empirical manifestations and their place in public policy. The article then moves on to elucidate further each set of ideas. A central argument is that the conflation of these notions partly emerges from a shared theoretical tradition, but also from insufficient theorizing of the processes in which each phenomenon is implicated. A number of suggestions are made for sharpening their explanatory focus, in particular better differentiating between cause and consequence, contextualizing social relations and social networks, and subjecting the policy 'solutions' that follow from each perspective to critical scrutiny. Placing the two in dialogue is beneficial for the further development of each.

Millimeter-Wave Soldier-to-Soldier Communications for Covert Battlefield Operations

Mobile ad hoc networking of dismounted combat personnel is expected to play an important role in the future of network-centric operations. High-speed, short-range, soldier-to-soldier wireless communications will be required to relay information on situational awareness, tactical instructions, and covert surveillance related data during special operations reconnaissance and other missions. This article presents some of the work commissioned by the U. K. Ministry of Defence to assess the feasibility of using 60 GHz millimeter-wave smart antenna technology to provide covert communications capable of meeting these stringent networking needs. Recent advances in RF front-end technology, alongside physical layer transmission schemes that could be employed in millimeter-wave soldier-mounted radio, are discussed. The introduction of covert communications between soldiers will require the development of a bespoke directive medium access layer. A number of adjustments to the IEEE 802.11 distribution coordination function that will enable directional communications are suggested. The successful implementation of future smart antenna technologies and direction of arrival-based protocols will be highly dependent on thorough knowledge of transmission channel characteristics prior to deployment. A novel approach to simulating dynamic soldier-to-soldier signal propagation using state-of-the-art animation-based technology developed for computer game design is described, and important channel metrics such as root mean square angle and delay spread for a team of four networked infantry soldiers over a range of indoor and outdoor environments is reported.

Do dynamic work instructions provide an advantage over static instructions in a small scale assembly task?

Recent studies exploring the effects of instructional animations on learning compared to static graphics have yielded mixed results. Few studies have explored their effectiveness in portraying procedural-motor information. Opportunities exist within an applied (manufacturing) context for instructional animations to be used to facilitate build performance on an assembly line. The present study compares build time performance across successive builds when using animation, static diagrams or text instructions to convey an assembly sequence for a handheld device. Although an immediate facilitating effect of animation was found, yielding a significantly faster build time for Build 1, this advantage had disappeared by Build 3. (C) 2009 Elsevier Ltd. All rights reserved.

Kawamoto’s "Dojoji Temple": Puppetry, Gesture and Myth

Dojoji Temple ( Dōjōji, 1976) is a short puppet animation directed by Kihachirō Kawamoto. Influenced by Bunraku (Japanese puppet plays), emaki (painted scroll), Noh theatre and Japanese myth, Dojoji Temple tells of a woman’s unrequited love for a young priest. Heartbroken, she then transforms into a sea serpent and goes after the priest for revenge. While Kawamoto’s animation is rich with Japanese aesthetics and tragedy, his animation is peopled by puppets who do not speak. Limited and restrained though the puppets may be, their animated gestures speak volumes of powerful emotions. For our article, we will select several scenes from the animation, and interpret their actions so that we can further understand the mythical world of Dojoji Temple and the essential being of puppetry. Our gesture analysis will take into account cinematographic compositions, sound and bodily attires, among other elements.

Selective small molecule inhibitors of glycogen synthase kinase-3 modulate glycogen metabolism and gene transcription

Background: Glycogen synthase kinase-3 (GSK-8) is a serine/threonine protein kinase, the activity of which is inhibited by a variety of extracellular stimuli including insulin, growth factors, cell specification factors and cell adhesion. Consequently, inhibition of GSK-3 activity has been proposed to play a role in the regulation of numerous signalling pathways that elicit pleiotropic cellular responses. This report describes the identification and characterisation of potent and selective small molecule inhibitors of GSK-3.

Strength and permeation properties as an indicator of durability of concrete

Durability of concrete is a great concern to all designers, owners and users of reinforced concrete structures. As a result, more restrictive regulations are being introduced in various Codes of Practice dealing with the design of these structures. Attempts are being made by various researchers to develop performance based specification. For this to be successful standard non destructive tests are required which will be used to assess the durability of concretes. In parallel with this approach, a research team in Queen’s University Belfast, U. K., investigated the effect of different mix parameters on workability, strength and various permeation properties. Furthermore, durability parameters such as freeze-thaw salt scaling resistance and carbonation depth were also investigated. The research was part funded by the Department of Environment, Transport and the Regions (DETR). This paper reports of the findings from this study. The results from this investigation showed that some of the non destructive tests used were reasonably well correlated with carbonation and freeze-thaw salt scaling resistance of CEM I concrete. If the mix parameters such as aggregate-cement ratio or water-cement ratio are known, better correlation can be obtained. Further investigation is required varying other mix parameters including various aggregates, admixtures and air entrainments before the result can be used for developing mix design methods for durable concretes. Also long term site tests are required to validate the results obtained from the accelerated laboratory tests used to study the carbonation resistance and freeze-thaw salt scaling resistance.

Handling Inconsistency In Distributed Software Requirements Specifications Based On Prioritized Merging

Developing a desirable framework for handling inconsistencies in software requirements specifications is a challenging problem. It has been widely recognized that the relative priority of requirements can help developers to make some necessary trade-off decisions for resolving con- flicts. However, for most distributed development such as viewpoints-based approaches, different stakeholders may assign different levels of priority to the same shared requirements statement from their own perspectives. The disagreement in the local levels of priority assigned to the same shared requirements statement often puts developers into a dilemma during the inconsistency handling process. The main contribution of this paper is to present a prioritized merging-based framework for handling inconsistency in distributed software requirements specifications. Given a set of distributed inconsistent requirements collections with the local prioritization, we first construct a requirements specification with a prioritization from an overall perspective. We provide two approaches to constructing a requirements specification with the global prioritization, including a merging-based construction and a priority vector-based construction. Following this, we derive proposals for handling inconsistencies from the globally prioritized requirements specification in terms of prioritized merging. Moreover, from the overall perspective, these proposals may be viewed as the most appropriate to modifying the given inconsistent requirements specification in the sense of the ordering relation over all the consistent subsets of the requirements specification. Finally, we consider applying negotiation-based techniques to viewpoints so as to identify an acceptable common proposal from these proposals.

SoC memory hierarchy derivation from dataflow graphs

Hardware synthesis from dataflow graphs of signal processing systems is a growing research area as focus shifts to high level design methodologies. For data intensive systems, dataflow based synthesis can lead to an inefficient usage of memory due to the restrictive nature of synchronous dataflow and its inability to easily model data reuse. This paper explores how dataflow graph changes can be used to drive both the on-chip and off-chip memory organisation and how these memory architectures can be mapped to a hardware implementation. By exploiting the data reuse inherent to many image processing algorithms and by creating memory hierarchies, off-chip memory bandwidth can be reduced by a factor of a thousand from the original dataflow graph level specification of a motion estimation algorithm, with a minimal increase in memory size. This analysis is verified using results gathered from implementation of the motion estimation algorithm on a Xilinx Virtex-4 FPGA, where the delay between the memories and processing elements drops from 14.2 ns down to 1.878 ns through the refinement of the memory architecture. Care must be taken when modeling these algorithms however, as inefficiencies in these models can be easily translated into overuse of hardware resources.

(Pro)Motion Pictures: Len Lye in the Thirties

This article examines Len Lye’s film-making in the 1930s within a broader visual arts context, seeking to clarify the nature and extent of his involvement in British documentary film culture at this time. In particular, it demonstrates how Lye's method of fusing 'live action', found footage, and animation techniques created the possibility of a radical documentary practice that could reconcile promotional advertising and commercial art with avant-garde abstraction and kinaesthetic experimentation. In particular, the article focusses on Lye's N. or N.W. (1937, 35mm, b&w, 10 mns), arguing that his work from this period should be regarded as central - and not marginal - to any serious reassessment of Britain's “Documentary Movement” of the inter-war era, and its relations to any history of the cinema and visual culture.

Regarding the Real: Cinema, Documentary, and the Visual Arts

Regarding the Real: Cinema, Documentary, and the Visual Arts develops an interdisciplinary approach to documentary film, focusing on its cultural and formal relations to other visual arts, such as animation, assemblage, photography, painting, sculpture, and architecture. The book considers the work of figures whose preferred film language is associative and fragmentary, and for whom the documentary is an endlessly open form, an unstable expressive phenomenon that cannot but interrogate the validity of its own narratives and representational modes. Combining close analysis with cultural history, Regarding the Real calls for a re-assessment of the influence of the modern arts in subverting the structures of realism typically associated with documentary filmmaking.

Managing Software Requirements Changes Based On Negotiation-Style Revision

For any proposed software project, when the software requirements specification has been established, requirements changes may result in not only a modification of the requirements specification but also a series of modifications of all existing artifacts during the development. Then it is necessary to provide effective and flexible requirements changes management. In this paper, we present an approach to managing requirements changes based on Booth’s negotiation-style framework for belief revision. Informally, we consider the current requirements specification as a belief set about the system-to-be. The request of requirements change is viewed as new information about the same system-to-be. Then the process of executing the requirements change is a process of revising beliefs about the system-to-be. We design a family of belief negotiation models appropriate for different processes of requirements revision, including the setting of the request of requirements change being fully accepted, the setting of the current requirements specification being fully preserved, and that of the current specification and the request of requirements change reaching a compromise. In particular, the prioritization of requirements plays an important role in reaching an agreement in each belief negotiation model designed in this paper.

Accounting change: Explaining the outcomes, interpreting the process

Purpose: The issue of accounting change, why and how accounting evolves through time and within specific organisational settings, has been addressed by an important body of literature. This paper aims to explain why, in processes of accounting change, organisations confronting similar environmental pressures show different outcomes of change.

Design/methodology/approach: Drawing on archetype theory, the paper analyses the case of two Italian local governments. Comparative case studies were carried out, reconstructing a period of 15 years.

Findings: Although confronted with similar environmental pressures, the two cases show two different patterns of accounting change, where only one case is able to finally reach radical change. Accounting change can be prompted by external stimuli, but, once the change is prompted, the outcomes of the change are explained by the dynamics of intra-organisational conditions.

Originality/value: The study contributes to accounting change literature by adopting an approach (i.e. archetype theory) that overcomes some of the limitations of previous studies in explaining variations in organisational change. Through this, the authors are able to explain different outcomes and paces of accounting change and point out the intra-organisational factors also affecting them in the presence of similar environmental pressures. A specification of the theoretical framework in a particular setting is also provided.

Two-stage RBF network construction based on particle swarm optimization

The conventional radial basis function (RBF) network optimization methods, such as orthogonal least squares or the two-stage selection, can produce a sparse network with satisfactory generalization capability. However, the RBF width, as a nonlinear parameter in the network, is not easy to determine. In the aforementioned methods, the width is always pre-determined, either by trial-and-error, or generated randomly. Furthermore, all hidden nodes share the same RBF width. This will inevitably reduce the network performance, and more RBF centres may then be needed to meet a desired modelling specification. In this paper we investigate a new two-stage construction algorithm for RBF networks. It utilizes the particle swarm optimization method to search for the optimal RBF centres and their associated widths. Although the new method needs more computation than conventional approaches, it can greatly reduce the model size and improve model generalization performance. The effectiveness of the proposed technique is confirmed by two numerical simulation examples.

Order Flow and the Monetary Model of Exchange Rates: Evidence from a Novel Data Set

We propose an exchange rate model that is a hybrid of the conventional specification with monetary fundamentals and the Evans–Lyons microstructure approach. We estimate a model augmented with order flow variables, using a unique data set: almost 100 monthly observations on interdealer order flow on dollar/euro and dollar/yen. The augmented macroeconomic, or “hybrid,” model exhibits greater in-sample stability and out of sample forecasting improvement vis-à-vis the basic macroeconomic and random walk specifications.

From inconsistency handling to non-canonical requirements management: A logical perspective

As a class of defects in software requirements specification, inconsistency has been widely studied in both requirements engineering and software engineering. It has been increasingly recognized that maintaining consistency alone often results in some other types of non-canonical requirements, including incompleteness of a requirements specification, vague requirements statements, and redundant requirements statements. It is therefore desirable for inconsistency handling to take into account the related non-canonical requirements in requirements engineering. To address this issue, we propose an intuitive generalization of logical techniques for handling inconsistency to those that are suitable for managing non-canonical requirements, which deals with incompleteness and redundancy, in addition to inconsistency. We first argue that measuring non-canonical requirements plays a crucial role in handling them effectively. We then present a measure-driven logic framework for managing non-canonical requirements. The framework consists of five main parts, identifying non-canonical requirements, measuring them, generating candidate proposals for handling them, choosing commonly acceptable proposals, and revising them according to the chosen proposals. This generalization can be considered as an attempt to handle non-canonical requirements along with logic-based inconsistency handling in requirements engineering.