962 resultados para Soybean meal and rice bran
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
It presents a direct exposure to solar dryer for drying of food, built from a scrap of luminaire. The dryer works under direct exposure to natural circulation. Will be presented their methods of construction and assembly of that dryer that allows the reuse of materials, constituting a environmentally correct recycling dryer main features proposed are its low cost and simple manufacturing processes and assembly. Test results will be presented for the drying of foods that prove the feasibility and cost of thermal solar drying alternative system proposed. It is worth emphasizing the social importance that such application is for the most excluded since the value-added fruits, vegetables, legumes and other foods in relation to fresh may represent an option of income generation. It will also study the transformation of some of dry food meal and demonstrated that the drying times for the foods tested are competitive and sometimes pointed in the solar literature
Resumo:
Este trabalho, desenvolvido ao nível de campo, na Fazenda Experimental Edgárdia, da Faculdade de Ciências Agronômicas da UNESP, Botucatu, no ano agrícola 1990/91, objetivou avaliar os efeitos do momento de admissão da água e da altura da lâmina de água sobre o desenvolvimento das plantas daninhas e os reflexos sobre as de arroz. O delineamento experimental usado foi de blocos ao acaso com parcelas subsubdivididas. Às parcelas, corresponderam os momentos de admissão de água M1, M2 e M3, respectivamente, 15, 42 e 74 dias após a emergência das plantas de arroz. As subparcelas corresponderam às alturas das lâminas de água L5, L10 e L15, respectivamente, 5, 10 e 15 cm e as subsubparcelas, a dois sistemas de condução: com capina (cc) e sem capina (sc). Verificou-se que o desenvolvimento das plantas daninhas foi afetado tanto pelo momento de admissão de água como pela altura da lâmina de água sendo a produção de grãos reduzida 61,5% devido à competição das plantas daninhas com a cultura.
Resumo:
The biodiesel use has become important due to its renewable character and to reduce environmental impacts during the fuel burning. Theses benefit will be valid if the fuel shows good performance, chemistry stability and compatibility with engines. Biodiesel is a good fuel to diesel engines due to its lubricity. Then, the aimed of this study was to verify the physicalchemistry properties of biodiesel and their correlations with possible elastomers damage after biodiesel be used as fuel in an injection system. The methodology was divided in three steps: biodiesels synthesis by transesterification of three vegetable oil (soybean, palm and sunflower) and their physical-chemistry characterization (viscosity, oxidative stability, flash point, acidity, humidity and density); pressurized test of compatibility between elastomers (NBR and VITON) and biodiesel, and the last one, analyze of biodiesels lubricity by tribological test ball-plan( HFRR). Also, the effect of mixture of biodiesel and diesel in different concentrations was evaluated. The results showed that VITON showed better compatibility with all biodiesel blends in relation to NBR, however when VITON had contact with sunflower biodiesel and its blends the swelling degree suffer higher influences due to biodiesel humidity. For others biodiesels and theirs blends, this elastomer kept its mechanical properties constant. The better tribological performance was observed for blends with high biodiesel concentration, lower friction coefficient was obtained when palm biodiesel was used. The main mechanisms observed during the HFRR tests were abrasive and oxidative wear
Resumo:
O objetivo deste trabalho foi avaliar os efeitos da interferência de Brachiaria plantaginea, em diferentes densidades e períodos de convivência, nos componentes de produção e produtividade de grãos de arroz. O experimento foi instalado no município de Santo Antônio de Posse - SP em delineamento de blocos ao acaso, com seis repetições, em esquema fatorial 7 x 4. Os tratamentos consistiram de sete períodos de convivência, expressos em dias após a emergência das plântulas (DAE) de B. plantaginea: controle - 0 DAE, 7 DAE, 14 DAE, 21 DAE, 28 DAE, 35 DAE e sem controle das plantas daninhas, combinados com quatro densidades dessas plantas: 1, 5, 25 e 90 plantas m-2. Foi avaliada a produção de massa seca de B. plantaginea, além dos componentes da produção e produtividade de grãos do arroz. O acúmulo de massa seca de B. plantaginea aumentou significativamente em todas as densidades com o aumento do período de convivência. O aumento do período de convivência e da densidade de plantas de B. plantaginea ocasionou redução dos componentes da produção e, consequentemente, da produtividade de grãos de arroz.
Resumo:
O objetivo deste trabalho foi avaliar o efeito de plantas de cobertura e da calagem sobre a produtividade da soja e as características químicas do perfil do solo, após implantação do plantio direto. O experimento foi realizado em campo por dois anos, em Latossolo Vermelho‑Amarelo. A área era explorada como pastagem há cinco anos. Avaliaram-se três sistemas de cultivo: soja/pousio/soja, soja/Pennisetum glaucum/soja e soja/Urochloa ruziziensis/soja, com aplicação de calcário à dosagem de 0, 0,5, 1,0 e 2,0 vezes a quantidade necessária para elevar a saturação de bases (V) a 50%, na camada de 0-20 cm. O calcário foi incorporado ao solo, a 20 cm de profundidade, previamente à implantação dos sistemas de cultivo. Aos 490 dias após a calagem, foram coletadas amostras de solo das profundidades de 0-10, 10-20, 20-40 e 40-60 cm. Avaliaram-se o estado nutricional das plantas, as alterações das características químicas do solo e a produtividade da soja. As plantas de cobertura associadas à calagem promovem melhorias nos parâmetros de acidez do solo - sobretudo quando a dose aplicada é igual ou mais elevada do que a recomendada para V 50% -, e aumentam o teor foliar de P e a produtividade da soja, independentemente da calagem. Quanto maior a dose de calcário, maior é o avanço da frente alcalina no solo e a produtividade de grãos.
Resumo:
In this work, a pneumatic dryer has been designed and assembled in laboratory scale in order to study and evaluate configurations more efficient for application in drying of important materials of Northeast region in Brazil. The equipment was tested with drying of corn and rice grains, in conditions of temperature and air velocity at 80 oC and 35 m/s, respectively. For this type of dryer, it is recommended to work at temperatures above 200 °C and air velocity with higher dynamic pressure. However, even under operating conditions below what it is recommended, the results obtained with the pneumatic dryer were satisfactory. In addition, experiments of drying were performed by using a cabinet dryer (batch dryer) under the same conditions used in the pneumatic dryer. Flash one curves for the corn were fitted satisfactorily by applying of the Lewis model, while a better agreement was found for rice by using the Page model. The data obtained with both drying processes allowed to compare the performance between pneumatic and batch dryers. In respect to drying rate, the pneumatic dryer presented a similar performance to the batch dryer during processing with corn and a superior performance to the last one during processing with rice. Therefore, it was possible to verify that the pneumatic dryer assembled in this preliminar study can be applied for different materials and under different operating conditions
Resumo:
O objetivo deste trabalho foi avaliar o efeito da aplicação superficial de lodos de esgoto, lama cal, escória de aciaria e calcário sobre o estado nutricional e a produtividade da soja, em sistema plantio direto. O delineamento foi o de blocos ao acaso em arranjo fatorial 4x4+1, constituído por quatro tratamentos - resíduos de lodo de esgoto centrifugado (LC) e de biodigestor (LB), escória de aciaria (E) e lama cal (Lcal) - nas doses 0, 2, 4 e 8 Mg ha-1, mais o controle com 2 Mg ha-1 de calcário. As plantas de soja apresentaram maior concentração de nitrogênio, fósforo e cálcio, em 2003, 2004 e 2005, e de potássio, em 2003 e 2004, em razão dos tratamentos LC, LB, E, Lcal e calagem. A produtividade da soja foi favorecida pela aplicação dos tratamentos no sistema plantio direto, em 2003, 2004 e 2005. O fósforo, e o cálcio contribuíram para o aumento da produtividade da soja em 2003 e 2004.
Resumo:
The petroleum production is associated to the produced water, which has dispersed and dissolved materials that damage not only the environment, but also the petroleum processing units. This study aims at the treatment of produced water focusing mainly on the removal of metals and oil and using this treated water as raw material for the production of sodium carbonate. Initially, it was addressed the removal of the following divalent metals: calcium, magnesium, barium, zinc, copper, iron, and cadmium. For this purpose, surfactants derived from vegetable oils, such as coconut oil, soybean oil, and sunflower oil, were used. The investigation showed that there is a stoichiometric relationship between the metals removed from the produced water and the surfactants used in the process of metals removal. It was also developed a model that correlates the hydrolysis constant of saponified coconut oil with the metal distribution between the resulting stages of the proposed process, flocs and aqueous phases, and relating the results with the pH of the medium. The correlation coefficient obtained was 0.963. Next, the process of producing washing soda (prefiro soda ahs ou sodium carbonate) started. The resulting water from the various treatment approaches from petroleum production water was used. During this stage of the research, it was observed that the surfactant assisted in the produced water treatment, by removing some metals and the dispersed oil entirety. The yield of sodium carbonate production was approximately 80%, and its purity was around 95%. It was also assessed, in the production of sodium carbonate, the influence of the type of reactor, using a continuous reactor and a batch reactor. These tests showed that the process with continuous reactor was not as efficient as the batch process. In general, it can be concluded that the production of sodium carbonate from water of oil production is a feasible process, rendering an effluent that causes a great environmental impact a raw material with large scale industrial use
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
No ano agrícola de 2004/05, na Fazenda Experimental da FE/Unesp-Campus de Ilha Solteira, localizada no Município de Selvíria, Mato Grosso do Sul - (MS), foram estudadas a variabilidade e a dependência espacial entre a macroporosidade (MA), a microporosidade (MI), a porosidade total (PT) e a densidade do solo (DS), em três profundidades, com a produtividade da soja (PG), em sistema plantio direto, sobre um Latossolo Vermelho distroférrico. O objetivo foi pesquisar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e do solo, visando a selecionar um indicador da qualidade física do solo para a produtividade da soja. Foi instalada a malha geoestatística, para a coleta de dados do solo e da planta, contendo 124 pontos amostrais, numa área de 4.000m². A correlação linear entre a produtividade de grãos de soja com os atributos do solo estudados foi baixa. Houve correlação espacial direta entre a PG e a MA nas camadas de zero-0,10m e 0,10-0,20m. A macroporosidade do solo (MA1), avaliada na camada de zero-0,10m, apresentou-se como o melhor indicador da qualidade física do solo quando destinada à avaliação da produtividade de soja, nas condições de plantio direto, em solo de cerrado.
Resumo:
Restos vegetais e liteira podem interferir no desenvolvimento de plantas. Este trabalho objetivou avaliar os efeitos alelopáticos de extratos aquosos de Pinus sp., milheto (Pennisetum americanum (L.) Leeke) e mucuna (Stizolobium aterrimum Piper & Tracy) sobre a germinação, colonização micorrízica e crescimento inicial de milho (Zea mays L.), soja (Glycine max L.) e feijão (Phaseolus vulgaris L.). Os extratos foram elaborados utilizando folhas trituradas. O experimento in vitro empregou papel Germitest umedecido com extratos ou água destilada por sete dias. O experimento em casa de vegetação teve esquema fatorial 3 x 3 x 4, com quatro repetições: três espécies vegetais (soja, milho e feijão), três extratos aquosos (Pinus, milheto e mucuna) e quatro doses de extrato (0,0; 0,5; 1,0; e 2,0 kg L-1). O substrato foi Latossolo Vermelho coletado no município de Selvíria-MS, no bioma Cerrado. Após a semeadura, os vasos receberam, a cada cinco dias, por 45 dias, 50 mL dos extratos. Para a soja, extratos de mucuna e milheto diminuíram o comprimento do hipocótilo e da radícula e os de Pinus aumentaram esses comprimentos. em feijão, o extrato de Pinus diminuiu o comprimento do hipocótilo e da radícula, mas os extratos de mucuna e milheto aumentaram-no. O extrato do milheto reduziu a percentagem e a velocidade de germinação em feijão. Todos os extratos reduziram a colonização micorrízica e o número de esporos de fungos micorrízicos arbusculares em soja, milho e feijão.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
As múltiplas características distintas do leite materno e do leite de vaca fazem com que o esvaziamento gástrico seja mais rápido após ingestão do primeiro. Esta rapidez do esvaziamento gástrico pode estar associada ao esvaziamento da vesícula biliar, também mais rápido. O objetivo do trabalho foi determinar se há diferença na velocidade de esvaziamento da vesícula biliar, por método ultra-sonográfico, após ingestão de leite materno e leite de vaca. Estudamos 47 crianças menores de dois anos, 22 após uma refeição com leite materno e 25 após uma refeição com leite de vaca. A vesícula biliar foi medida após um período de quatro a seis horas de jejum e uma hora após uma refeição (leite materno ou leite de vaca), e a contração da vesícula biliar foi avaliada, em porcentagem, pela diferença de volume da vesícula biliar entre as duas medidas e expressa em porcentagem do volume inicial. As medianas das porcentagens do volume inicial para as crianças alimentadas com leite materno e leite de vaca foram, respectivamente, 92,25% e 53,8%, diferença estatisticamente significativa. Portanto, a contração da vesícula biliar após uma refeição com leite de vaca é muito mais lenta do que aquela após uma refeição com leite materno.
Resumo:
This present study aimed at evaluating the effect of the addition of an emulsifier to diets containing soybean oil, poultry fat or their blend, on the performance, carcass traits, serum lipid levels, pancreatic lipase concentration and nutrient digestibility of broilers. A randomized block design was applied using a 3 x 2 factorial arrangement, with three fat sources (soybean oil, poultry fat, and a blend of 50% soybean oil and 50% poultry fat) and the addition or not of an emulsifier. In experiment I, broiler performance, carcass traits, serum cholesterol, HDL, and triglyceride levels, and pancreatic lipase activity in 42-day-old broilers were evaluated. In experiment II, dry matter (DM), ether extract (EE), crude protein (CP) and crude fiber (CF) coefficients of digestibility were analyzed. Broilers fed the diet containing soybean oil and emulsifier presented higher body weight, weight gain and better feed conversion ratio. When birds were fed poultry fat and the fat blend (soybean oil and poultry fat) and the emulsifier was added to the diets, pancreatic lipase concentration increased. It was concluded that the use of soybean oil, poultry fat and their blend does no in the diet does not influence the performance, carcass traits, or serum cholesterol, HDL and triglyceride levels of 42-day-old broilers. The addition of emulsifiers to diets containing poultry fat improves ether extract digestibility and increases the production and secretion of pancreatic lipase.