Otimização dos parâmetros para obtenção de nanotubos em Ti-Cp por anodização eletroquímica e aplicação na liga experimental Ti-35Nb-7Zr

Pós-graduação em Engenharia Mecânica - FEG

Modificação de superfície da liga Ti6A14V para apliacação biomédica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Empobrecimento e podzolização de solos lateríticos da bacia do Rio Negro e gênese dos podzóis na alta Bacia da Amazônia

Pós-graduação em Geografia - IGCE

Carcinoma de células escamosas em assoalho vaginal de um bovino nelore associado a metástase em pulmão: relato de caso

The squamous cell carcinoma (SCC) is a neoplasm that affect pets and production animals and it’s very common in tropical countries like Brazil; develops in sparsely pigmented, stratified squamous epithelium and in mucosal surfaces exposed Ultraviolet action. The SCC is quite infiltrative but rarely causes metastases. Its occurrence in the female reproductive tract is recognized in the literature on cattle breeds from Europe. This case was a female bovine, Nelore, adult, who was referred to the "Hospital Veterinário Luiz Quintiliano de Oliveira" with dark brown fluid leakage and putrid odor, associated with ulcerative growth of the vagina. Because the extent of injury, the animal was euthanized and taken to the necropsy, which was observed on board structure, ulcerated and pus in the vaginal floor, infiltrated into the pelvic cavity to the serosa of the uterine body. The microscopic findings were detected neoplastic proliferation of epithelial cells in the floor and vaginal metastases in the lung parenchyma, and classified the primary tumor and metastasis as squamous cell carcinoma moderately differentiated.

Abordagens periodontais na promoção da harmonia do sorriso

Several therapeutic approaches have been proposed in order to achieve an esthetically pleasing and harmony smile. The present study reports a case in which gingivectomy was performed in the region of the upper anterior teeth combined with osteotomy in the region of the upper posterior teeth and removal of the superior labial frenum to promote harmony smile by decreasing the gummy smile and adequacy of buccal corridor. Osteoplasty gingivoplasty, and frenectomy procedures were planned and performed in a single session. The extraction of the maxillary third molars was also performed in order to avoid postoperative complications. Follow-up visits were performed at 7, 15, 30 and 180 days postoperatively. At 7 days, the gingival tissue was in the initial process of healing, demonstrating inflammation still in evidence. At 15 days, the gingival tissue was found in the final healing process, showing characteristics of normal health gum. At 30 days, there was complete healing of gingival tissues without clinical exposure of the root surfaces. After 180 days, tissues remained in healthy, demonstrating the success of the treatment. Patient showed complete satisfaction with the results. It can be concluded that, when properly indicated, the combination of gingivectomy, osteotomy and frenectomy procedures are promising therapeutic approaches for promoting harmony smile.

Compatibilidade entre alginato e gesso ortodônticos: capacidade de umedecimento sob influência da desinfecção do molde

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Manutenção em próteses implantossuportadas: higiene oral

The maintenance of Implant-supported Prosthesis is essential to the success of dental implants. Therefore, the aim of the study was to conduct a review the literature addressing maintenance Implant-Supported Prosthesis in order to guide planning for the longevity of oral rehabilitation. We conducted a detailed search strategy for the Pubmed / Medline Dentistry and Oral Science, used as descriptors: “Oral Hygiene“ and “Dental Implant until July, 2013. The results were grouped together in topics (Clinical Exam and Oral Hygiene) and discussed. Conclusion: A regular maintenance program for oral patient implantprosthesis is essential to the longevity of the treatment. Different methods and devices are effective for cleansing. However one orientation (in writing) must be offered to patients, since inadequate cleaning can create regions of abrasion on the surfaces of abutments and dental implants.

Wettability behavior of nanotubular TiO2 intended for biomedical applications

Nanotubes have been subject of studies with regard to their ability to promote differentiation of several cells lines. Nanotubes have been used to increase the roughness of the implant surfaces and to improve bone tissue integration on dental implant. In this study TiO2 nanotube layer prepared by anodic oxidation was evaluated. Nanotube formation was carried out using Glycerol-H2O DI(50-50 v/v)+NH4F(0,5 a 1,5% and 10-30V) for 1-3 hours at 37ºC. After nanostructure formation the topography of surface was observed using field-emission-scanning-microscope (FE-SEM). Contact angle was evaluated on the anodized and non-anodized surfaces using a water contact angle goniometer in sessile drop mode with 5 μL drops. In the case of nanotube formation and no treatment surface were presented 39,1° and 75,9°, respectively. The contact angle describing the wettability of the surface is enhanced, more hydrophilic, on the nanotube surfaces, which can be advantageous for enhancing protein adsorption and cell adhesion.

Implantes osseointegrados: evolução e sucesso

Introduction: The oral rehabilitation with dental implants is a very viable treatment modality for patients. Therefore the discovery of osseointegration, dentistry has reached the trigger with respect to treatment with a high predictability of success. For this various principles, since the surgical protocols, the choice of material and even the technique for the manufacture of implant-supported prosthesis influence a good prognosis for treatment. Objective: Therefore, it is proposed this study a literature review of the fundamentals of osseointegration, explaining the historical and technical parameters of implantology, focusing in what the literature currently is studying with more intensity, the acceleration of osseointegration. Conclusion:well conducted procedures promotes the best aimed success in implantology. Rough surfaces shows great are for implant-bone contact and better mechanical results. The bone quality is fundamental in results foresigh.

Avaliação dos preparos da superfície cerâmica para a colagem de acessórios ortodônticos

The purpose of this study was to evaluate the effects of two conditioning methods used to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. A total of 18 feldspathic specimens were used. The specimens were divided randomly into two groups (n = 9): group free silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive); group silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by silane (Silano Ângelus) for 1 minute, adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive). All specimens were stored in solution of artificial saliva at ambient temperature for 24 hours. The debonding was done with shear strength through a universal testing machine (DL 500-Emic) calibrated with a fixed speed of 1mm/minute. Statical analysis was performed using the Student t test. The results indicated that in the free silane group the mean bond strength was 9,97 MPA, significantly lower than the silane group, that was 12,38 MPa (p < 0,05). The both groups were effective for bonding, although the silane group had the highest bond strength values.

Caries formation around restorative composite and glass ionomer cement

This in vitro study evaluated the demineralization around restorations class V made on the buccal and lingual surfaces of teeth when using different restorative materials. Thirty extracted teeth were randomly divided into 3 groups (n=10) according to the restorative material: Group I - Fuji II LC (GC America Inc., Alsip, Illinois, USA), Group II - Tetric (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Group III - Chelon Fil (3M/ESPE., Seefeld, Germany). The teeth were submitted to a pH-cycling model associated to a thermocycling model. Sections were made and the specimens were analyzed under a polarized light microscopy as for the presence of demineralization. Measurements were performed and the results were subjected to statistical analysis using Anova and Tukey´s Test (α=0.05). Mean values of demineralization depth (µm) according to each positions showed that the demineralization was significantly reduced when Chelon Fil (Group III) was used for all depths, when compared to fluoridated resin materials. Also, it was verified that non-fluoridated resin material, composite resin Tetric, had the lowest inhibitory effect on the development of demineralization.

Biossegurança na clínica de radiologia odontológica

In the practice of dental radiology, although there was no production of aerosols, there is the contamination of equipment and surfaces by contact with blood and saliva. This is making necessary the adoption infection control procedures to protect patients and staff. The objective of this paper is to present the procedures of prevention during the radiographic examination and radiographic processing in the darkroom. The proposed recommendations for the area of Dental Radiology include efficient cleaning and protection of equipment and surfaces, personal protective measures and to avoid contamination of the darkroom. These recommendations are obtained by simple procedures as cover films and radiological equipment with plastic barriers.

Opportunistic microorganisms in patients with head and neck trauma

The use of antimicrobial agents has facilitated the dissemination of multi-resistant microorganisms, compromising dental and medical treatment. The aim of this study was to evaluate the distribution of different opportunistic microbial species in patients who suffered head and neck trauma, under temporary maintenance in nosocomial environment, particularly intensive care units, on the occurrence of such microorganisms in the oral cavity of the patients. It was selected 38 patients subjected to head and neck traumas. After emergency surgical procedures, clinical samples of saliva, sub and supragingival biofilms and mucosal surfaces were collected at two different moments: just after stabilization of the patient and soon after patients’ release from medical units. The presence of opportunistic and superinfecting microorganisms was evaluated by culture on selective and non-selective media, and the presence of the family Enterobacteriaceae, as well as genera Enterococcus, Pseudomonas, and Staphylococcus was assessed by PCR. It was found that the use of antimicrobials, even for short periods of time was sufficient to facilitate colonization by microorganisms of the families Enterobacteriaceae and Pseudomonadaceae, as well as yeasts and enterococci. These results support the concept that medical and dental teams should make a periodically change of antimicrobials used in treatment protocols in hospital for head and neck trauma patients, in order to minimize dissemination of opportunistic or superinfecting microorganisms.

Clinical evaluation of multiple-surface ART restorations: three-year follow-up

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carcinoma de células escamosas em epitélio nasal de um hamster chinês: relato de caso

The squamous cell carcinoma (SCC) is a neoplasm that affect pets, production animals and exotic animals, and it’s very common in tropical countries like Brazil, once it develops a sparsely pigmented, stratified squamous epithelium and on surfaces mucosa exposed to ultraviolet action. The SCC is quite infiltrative but rarely causes metastases. Its occurrence in the nasal epithelium is widely reported in cats. This case is a chinese hamster (Cricetulus griséus), female, young, who developed a nasal nodule, and their only clinical sign was intense itching. The animal underwent surgery to perform an incisional biopsy, which was referred to the Veterinary Pathology Service of UNESP, campus of Araçatuba (SP) for histopathological evaluation. The material showed features consistent with squamous cell carcinoma well differentiated.