Controle de mobilidade infraestruturado e orientado à qualidade para maximização de admissões em sistemas WiNeMO: uma abordagem definida por software

The spread of wireless networks and growing proliferation of mobile devices require the development of mobility control mechanisms to support the different demands of traffic in different network conditions. A major obstacle to developing this kind of technology is the complexity involved in handling all the information about the large number of Moving Objects (MO), as well as the entire signaling overhead required to manage these procedures in the network. Despite several initiatives have been proposed by the scientific community to address this issue they have not proved to be effective since they depend on the particular request of the MO that is responsible for triggering the mobility process. Moreover, they are often only guided by wireless medium statistics, such as Received Signal Strength Indicator (RSSI) of the candidate Point of Attachment (PoA). Thus, this work seeks to develop, evaluate and validate a sophisticated communication infrastructure for Wireless Networking for Moving Objects (WiNeMO) systems by making use of the flexibility provided by the Software-Defined Networking (SDN) paradigm, where network functions are easily and efficiently deployed by integrating OpenFlow and IEEE 802.21 standards. For purposes of benchmarking, the analysis was conducted in the control and data planes aspects, which demonstrate that the proposal significantly outperforms typical IPbased SDN and QoS-enabled capabilities, by allowing the network to handle the multimedia traffic with optimal Quality of Service (QoS) transport and acceptable Quality of Experience (QoE) over time.

Role of Hydrological Process Representation on Erosion, Deposition, and Sediment Yield Estimate

Soil erosion by water is a major driven force causing land degradation. Laboratory experiments, on-site field study, and suspended sediments measurements were major fundamental approaches to study the mechanisms of soil water erosion and to quantify the erosive losses during rain events. The experimental research faces the challenge to extent the result to a wider spatial scale. Soil water erosion modeling provides possible solutions for scaling problems in erosion research, and is of principal importance to better understanding the governing processes of water erosion. However, soil water erosion models were considered to have limited value in practice. Uncertainties in hydrological simulations are among the reasons that hindering the development of water erosion model. Hydrological models gained substantial improvement recently and several water erosion models took advantages of the improvement of hydrological models. It is crucial to know the impact of changes in hydrological processes modeling on soil erosion simulation.

This dissertation work first created an erosion modeling tool (GEOtopSed) that takes advantage of the comprehensive hydrological model (GEOtop). The newly created tool was then tested and evaluated at an experimental watershed. The GEOtopSed model showed its ability to estimate multi-year soil erosion rate with varied hydrological conditions. To investigate the impact of different hydrological representations on soil erosion simulation, a 11-year simulation experiment was conducted for six models with varied configurations. The results were compared at varied temporal and spatial scales to highlight the roles of hydrological feedbacks on erosion. Models with simplified hydrological representations showed agreement with GEOtopSed model on long temporal scale (longer than annual). This result led to an investigation for erosion simulation at different rainfall regimes to check whether models with different hydrological representations have agreement on the soil water erosion responses to the changing climate. Multi-year ensemble simulations with different extreme precipitation scenarios were conducted at seven climate regions. The differences in erosion simulation results showed the influences of hydrological feedbacks which cannot be seen by purely rainfall erosivity method.

Exploration of the relationship between tacit knowledge and software system test complexity

This research has explored the relationship between system test complexity and tacit knowledge. It is proposed as part of this thesis, that the process of system testing (comprising of test planning, test development, test execution, test fault analysis, test measurement, and case management), is directly affected by both complexity associated with the system under test, and also by other sources of complexity, independent of the system under test, but related to the wider process of system testing. While a certain amount of knowledge related to the system under test is inherent, tacit in nature, and therefore difficult to make explicit, it has been found that a significant amount of knowledge relating to these other sources of complexity, can indeed be made explicit. While the importance of explicit knowledge has been reinforced by this research, there has been a lack of evidence to suggest that the availability of tacit knowledge to a test team is of any less importance to the process of system testing, when operating in a traditional software development environment. The sentiment was commonly expressed by participants, that even though a considerable amount of explicit knowledge relating to the system is freely available, that a good deal of knowledge relating to the system under test, which is demanded for effective system testing, is actually tacit in nature (approximately 60% of participants operating in a traditional development environment, and 60% of participants operating in an agile development environment, expressed similar sentiments). To cater for the availability of tacit knowledge relating to the system under test, and indeed, both explicit and tacit knowledge required by system testing in general, an appropriate knowledge management structure needs to be in place. This would appear to be required, irrespective of the employed development methodology.

Transfert de connaissances et politiques publiques : le cas de la politique de gratuité des soins au Niger

Au Niger, le taux de mortalité maternelle est estimé à 535 décès pour 100 000 naissances vivantes (INS, 2013) et la probabilité pour un nouveau-né de mourir avant l’âge d’un mois est de 33 ‰. Depuis 2006, le Niger a mis en place une politique de gratuité des soins pour les femmes enceintes et les enfants de 0 à 5 ans, ce qui a contribué à une amélioration significative de la fréquentation des centres de santé. En mars 2012, un processus délibératif fut organisé pendant une conférence de trois jours pour échanger sur les acquis, limites et perspectives de cette nouvelle politique avec 160 participants dont des chercheurs, des humanitaires, des décideurs politiques et des intervenants sur le terrain. L’objectif de cette recherche est de comprendre les effets de cette conférence ainsi que d’explorer les activités du comité de suivi de la feuille de route. La recherche a été réalisée durant deux mois en été 2014 à Niamey et à N’guiguimi. Elle a reposé sur l’utilisation du cadre conceptuel de Boyko et al., (2012) qui permet de décrire les principales caractéristiques et les effets attendus des dialogues délibératifs et comprendre comment les dialogues délibératifs peuvent contribuer à l’élaboration de politiques sur la base de données probantes. Nous avons mis un accent particulier sur les trois formes d’utilisation des connaissances présentées par Dagenais et al., (2013) : instrumentale, conceptuelle et persuasive. Des entretiens semi-directifs ont été effectués avec 22 acteurs impliqués dans la mise en oeuvre des recommandations. Ils ont été enregistrés, retranscrits intégralement et traités avec le logiciel QDA Miner. Les résultats de l’analyse des discours recueillis révèlent une utilisation instrumentale des recommandations et plus visible chez les humanitaires que les décideurs et les acteurs de la société civile. Il ressort aussi de cette analyse une utilisation conceptuelle et persuasive des recommandations à un degré plus faible parmi tous les acteurs. Le comité de suivi de la feuille route de la conférence n’a pratiquement pas fonctionné, par conséquent, le processus n’a pas eu l’impact souhaité. Les principales raisons de cet échec sont liées au contexte de mise en oeuvre des recommandations (arrestation de plusieurs agents du ministère de la Santé publique qui sont des membres clés du comité de suivi à cause du détournement des fonds GAVI, manque de volonté technique et politique) et/ou aux conditions financières (absence de primes pour les membres du comité et de budget de fonctionnement.). Les iv résultats obtenus ont permis de comprendre les énormes défis (contextuels, financiers notamment) qui restent à relever en matière de transfert de connaissance dans le secteur de santé publique au Niger. En ce qui concerne la suite de la conférence, il faudrait accélérer la redynamisation du comité de suivi en le dotant d’un fonds de fonctionnement et en créant une agence autonome de gestion de la gratuité des soins; et renforcer le soutien politique autour de l’Initiative Santé Solidarité Sahel.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.

A Preliminary Case Study for Collaborative Quality Enhancement

Eight universities have collaborated in an Erasmus+ funded project to create a lean process to enhance self-evaluation and accreditation through peer alliance and cooperation. Central to this process is the partnering of two institutions as critical friends, based on prior selfevaluations of specific programmes to identify particular criteria for improvement. A pairing algorithm matches two institutions based on their respective self-evaluation scores. It ensures there are significant differences in key criteria that are mutually beneficial for future programme development and enhancement. The ensuing meetings between critical friends have been designated as ‘cross-sparring’. This paper focuses on a case-study of the crosssparring and resulting enhancement outcomes between Umeå University and Queen’s University Belfast, and their respective Masters programmes in Software Engineering and Mechanical Engineering. The collaborative experiences of the process are evaluated, reported, discussed and conclusions provided on the efficacy of this particular application of cross-sparring.

Advanced Business Simulations-Incorporating business and process execution data

Key Performance Indicators (KPIs) and their predictions are widely used by the enterprises for informed decision making. Nevertheless , a very important factor, which is generally overlooked, is that the top level strategic KPIs are actually driven by the operational level business processes. These two domains are, however, mostly segregated and analysed in silos with different Business Intelligence solutions. In this paper, we are proposing an approach for advanced Business Simulations, which converges the two domains by utilising process execution & business data, and concepts from Business Dynamics (BD) and Business Ontologies, to promote better system understanding and detailed KPI predictions. Our approach incorporates the automated creation of Causal Loop Diagrams, thus empowering the analyst to critically examine the complex dependencies hidden in the massive amounts of available enterprise data. We have further evaluated our proposed approach in the context of a retail use-case that involved verification of the automatically generated causal models by a domain expert.

GiveMe Shelter: a people-centred design process for promoting independent inquiry-led learning in engineering

It has become increasingly common for tasks traditionally carried out by engineers to be undertaken by technicians and technologist with access to sophisticated computers and software that can often perform complex calculations that were previously the responsibility of engineers. Not surprisingly, this development raises serious questions about the future role of engineers and the education needed to address these changes in technology as well as emerging priorities from societal to environmental challenges. In response to these challenges, a new design module was created for undergraduate engineering students to design and build temporary shelters for a wide variety of end users from refugees, to the homeless and children. Even though the module provided guidance on principles of design thinking and methods for observing users needs through field studies, the students found it difficult to respond to needs of specific end users but instead focused more on purely technical issues.

Extending Automated Testing To High-level Software Requirements : A study on the feasibility of automated acceptance-testing

Automated acceptance testing is the testing of software done in higher level to test whether the system abides by the requirements desired by the business clients by the use of piece of script other than the software itself. This project is a study of the feasibility of acceptance tests written in Behavior Driven Development principle. The project includes an implementation part where automated accep- tance testing is written for Touch-point web application developed by Dewire (a software consultant company) for Telia (a telecom company) from the require- ments received from the customer (Telia). The automated acceptance testing is in Cucumber-Selenium framework which enforces Behavior Driven Development principles. The purpose of the implementation is to verify the practicability of this style of acceptance testing. From the completion of implementation, it was concluded that all the requirements from customer in real world can be converted into executable specifications and the process was not at all time-consuming or difficult for a low-experienced programmer like the author itself. The project also includes survey to measure the learnability and understandability of Gherkin- the language that Cucumber understands. The survey consist of some Gherkin exam- ples followed with questions that include making changes to the Gherkin exam- ples. Survey had 3 parts: first being easy, second medium and third most difficult. Survey also had a linear scale from 1 to 5 to rate the difficulty level for each part of the survey. 1 stood for very easy and 5 for very difficult. Time when the partic- ipants began the survey was also taken in order to calculate the total time taken by the participants to learn and answer the questions. Survey was taken by 18 of the employers of Dewire who had primary working role as one of the programmer, tester and project manager. In the result, tester and project manager were grouped as non-programmer. The survey concluded that it is very easy and quick to learn Gherkin. While the participants rated Gherkin as very easy.

Modelo institucional do processo de estruturação de empresas de desenvolvimento de software: um estudo de múltiplos casos

Some authors have shown the need of understanding the technological structuring process in contemporary firms. From this perspective, the software industry is a very important element because it provides products and services directly to many organizations from many fields. In this case, the Brazilian software industry has some peculiarities that distinguish it from other industries located in developed countries, which makes its understanding even more relevant. There is evidence that local firms take different strategies and structural configurations to enter into a market naturally dominated by large multinational firms. Therefore, this study aims to understand not only the structural configurations assumed by domestic firms but also the dynamic and the process that lead to these different configurations. To do so, this PhD dissertation investigates the institutional environment, its entities and the isomorphic movements, by employing an exploratory, descriptive and explanatory multiple cases study. Eight software development companies from the Recife's information technology Cluster were visited. Also, a form was applied and an interview with one of the main firm s professional was conducted. Although the study is predominantly qualitative, part of the data was analyzed through charts and graphs, providing a companies and environment overview that was very useful to analysis done through the interviews interpretation. As a result, it was realized that companies are structured around hybrids business models from two ideal types of software development companies, which are: software factory and technology-based company. Regarding the development process, it was found that there is a balanced distribution between the traditional and agile development paradigm. Among the traditional methodologies, the Rational Unified Process (RUP) is predominant. The Scrum is the most used methodology among the organizations based on the Agile Manifesto's principles. Regarding the structuring process, each institutional entity acts in such way that generates different isomorphic pressure. Emphasis was given to entities such as customers, research agencies, clusters, market-leading businesses, public universities, incubators, software industry organizations, technology vendors, development tool suppliers and manager s school and background because they relate themselves in a close way with the software firms. About this relationship, a dual and bilateral influence was found. Finally, the structuring level of the organizational field has been also identified as low, which gives a chance to organizational actors of acting independently

Effektivisering av mjukvaruinstallationer : Genom automatiserad mjukvarudistribution

Software deployment, eller mjukvarudistribution översatt till svenska kan ses som processen där alla aktiviteter ingår för att göra en mjukvara tillgänglig för användare utan en manuell installation på användarens dator eller annan maskin. Det finns ett flertal software deployment-verktyg, som hanterar automatiska installationer, tillgängliga för företag på marknaden idag.  Avdelningen HVDC på ABB i Ludvika har behov att börja använda ett verktyg för automatiserade installationer av mjukvaror då installationer idag utförs manuellt och är tidsödande. Som Microsoftpartners vill ABB se hur Microsofts verktyg för mjukvarudistribution skulle kunna hjälpa för detta behov.  Vår studie syftade till att undersöka hur arbetet med installationer av mjukvara ser ut idag, samt hitta förbättringsmöjligheter för installationer som inte kan automatiseras i nuläget. I studien ingick även att ta fram ett generellt ramverk för hur verksamheter kan gå tillväga när de vill börja använda sig utav software deployment-verktyg. I ramverket ingår en utformad kravspecifikation som ska utvärderas mot Microsofts verktyg.  För att skapa en uppfattning om hur arbetet i verksamheten ser ut idag har vi utfört enkätundersökning och intervjuer med personal på HVDC. För att utveckla ett ramverk har vi använt oss av insamlade data från de intervjuer, enkätundersökning och gruppintervju som utförts, detta för att identifiera krav och önskemål från personalen hos ett software deployment-verktyg. Litteraturstudier utfördes för att skapa en teoretisk referensram att utgå ifrån vid utvecklande av ramverket och kravspecifikationen.  Studien har resulterat i en beskrivning av software deployment, förbättringsmöjligheter i arbetet med installationer av mjukvara samt ett generellt ramverk som beskriver hur verksamheter kan gå tillväga när de ska börja använda ett software deployment-verktyg. Ramverket innehåller också en kravspecifikation som använts för att utvärdera Microsofts verktyg för mjukvarudistribution. I vår studie har vi inte sett att någon tidigare har tagit fram ett generellt ramverk och kravspecifikation som verksamheter kan använda sig av som underlag när de ska börja använda ett software deployment-verktyg. Vårt resultat av studien kan täcka upp detta kunskapsgap.    

Probabilistic Graphical Modelling for Software Product Lines: A Frameweork for Modeling and Reasoning under Uncertainty

This work provides a holistic investigation into the realm of feature modeling within software product lines. The work presented identifies limitations and challenges within the current feature modeling approaches. Those limitations include, but not limited to, the dearth of satisfactory cognitive presentation, inconveniency in scalable systems, inflexibility in adapting changes, nonexistence of predictability of models behavior, as well as the lack of probabilistic quantification of model’s implications and decision support for reasoning under uncertainty. The work in this thesis addresses these challenges by proposing a series of solutions. The first solution is the construction of a Bayesian Belief Feature Model, which is a novel modeling approach capable of quantifying the uncertainty measures in model parameters by a means of incorporating probabilistic modeling with a conventional modeling approach. The Bayesian Belief feature model presents a new enhanced feature modeling approach in terms of truth quantification and visual expressiveness. The second solution takes into consideration the unclear support for the reasoning under the uncertainty process, and the challenging constraint satisfaction problem in software product lines. This has been done through the development of a mathematical reasoner, which was designed to satisfy the model constraints by considering probability weight for all involved parameters and quantify the actual implications of the problem constraints. The developed Uncertain Constraint Satisfaction Problem approach has been tested and validated through a set of designated experiments. Profoundly stating, the main contributions of this thesis include the following: • Develop a framework for probabilistic graphical modeling to build the purported Bayesian belief feature model. • Extend the model to enhance visual expressiveness throughout the integration of colour degree variation; in which the colour varies with respect to the predefined probabilistic weights. • Enhance the constraints satisfaction problem by the uncertainty measuring of the parameters truth assumption. • Validate the developed approach against different experimental settings to determine its functionality and performance.

A Scalable Design Framework for Variability Management in Large-Scale Software Product Lines

Variability management is one of the major challenges in software product line adoption, since it needs to be efficiently managed at various levels of the software product line development process (e.g., requirement analysis, design, implementation, etc.). One of the main challenges within variability management is the handling and effective visualization of large-scale (industry-size) models, which in many projects, can reach the order of thousands, along with the dependency relationships that exist among them. These have raised many concerns regarding the scalability of current variability management tools and techniques and their lack of industrial adoption. To address the scalability issues, this work employed a combination of quantitative and qualitative research methods to identify the reasons behind the limited scalability of existing variability management tools and techniques. In addition to producing a comprehensive catalogue of existing tools, the outcome form this stage helped understand the major limitations of existing tools. Based on the findings, a novel approach was created for managing variability that employed two main principles for supporting scalability. First, the separation-of-concerns principle was employed by creating multiple views of variability models to alleviate information overload. Second, hyperbolic trees were used to visualise models (compared to Euclidian space trees traditionally used). The result was an approach that can represent models encompassing hundreds of variability points and complex relationships. These concepts were demonstrated by implementing them in an existing variability management tool and using it to model a real-life product line with over a thousand variability points. Finally, in order to assess the work, an evaluation framework was designed based on various established usability assessment best practices and standards. The framework was then used with several case studies to benchmark the performance of this work against other existing tools.

Modélisation du comportement des bétons fibrés à ultra-hautes performances par la micromécanique : Effet de l'orientation des fibres à l'échelle de la structure

Cette thèse s’inscrit dans le contexte d’une optimisation industrielle et économique des éléments de structure en BFUP permettant d’en garantir la ductilité au niveau structural, tout en ajustant la quantité de fibres et en optimisant le mode de fabrication. Le modèle développé décrit explicitement la participation du renfort fibré en traction au niveau local, en enchaînant une phase de comportement écrouissante suivie d’une phase adoucissante. La loi de comportement est fonction de la densité, de l’orientation des fibres vis-à-vis des directions principales de traction, de leur élancement et d’autres paramètres matériaux usuels liés aux fibres, à la matrice cimentaire et à leur interaction. L’orientation des fibres est prise en compte à partir d’une loi de probabilité normale à une ou deux variables permettant de reproduire n’importe quelle orientation obtenue à partir d’un calcul représentatif de la mise en oeuvre du BFUP frais ou renseignée par analyse expérimentale sur prototype. Enfin, le modèle reproduit la fissuration des BFUP sur le principe des modèles de fissures diffuses et tournantes. La loi de comportement est intégrée au sein d’un logiciel de calcul de structure par éléments finis, permettant de l’utiliser comme un outil prédictif de la fiabilité et de la ductilité globale d’éléments en BFUP. Deux campagnes expérimentales ont été effectuées, une à l’Université Laval de Québec et l’autre à l’Ifsttar, Marne-la-Vallée. La première permet de valider la capacité du modèle reproduire le comportement global sous des sollicitations typiques de traction et de flexion dans des éléments structurels simples pour lesquels l’orientation préférentielle des fibres a été renseignée par tomographie. La seconde campagne expérimentale démontre les capacités du modèle dans une démarche d’optimisation, pour la fabrication de plaques nervurées relativement complexes et présentant un intérêt industriel potentiel pour lesquels différentes modalités de fabrication et des BFUP plus ou moins fibrés ont été envisagés. Le contrôle de la répartition et de l’orientation des fibres a été réalisé à partir d’essais mécaniques sur prélèvements. Les prévisions du modèle ont été confrontées au comportement structurel global et à la ductilité mis en évidence expérimentalement. Le modèle a ainsi pu être qualifié vis-à-vis des méthodes analytiques usuelles de l’ingénierie, en prenant en compte la variabilité statistique. Des pistes d’amélioration et de complément de développement ont été identifiées.

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers