Sustainable urban planning: parameters to the operational process

In modern society, energy consumption and respect for the environment have become essential aspects of urban planning. The rising demand for alternative sources of energy, coupled with the decline in the construction sector and material usage, gives the idea that the thinking on modern cities, where attention is given to reduced energy consumption, savings, waste recycling and respect for the surrounding environment, is being put into practice. If we examine development of the city over recent centuries, by means of the theories of the most famous and influential urban planners, it is possible to identify the major problems caused by this type of planning. For this reason, in recent urban planning the use of systems of indicators that evaluate and certify land environmentally and energetically guides the master plan toward a more efficient city model. In addition the indicators are targeted on key factors determined by the commissioner or the opportunities the territory itself provides. Due the complexity of the environmental mechanics, the process of design and urban planning has become a challenging issue. The introduction of the indicators system has made it possible to register the life of the process, with a spiral route that allows the design itself to be refined. The aim of this study, built around the creation of a system of urban sustainability indicators that will evaluate highly eco-friendly cities, is to develop a certification system for cities or portions of them. The system will be upgradeable and objective, will employ real data and will be concerned with energy production and consumption.

Improving building technologies with a sustainable strategy

In recent years it has been noticed the progressive disappearance of vernacular sustainable building technologies all over the world mainly due to a strong urban rehabilitation process with modern technologies not compatible with ancient knowledge. Simultaneously new dwellings are needed all over the world and in this sense it was decided to study an ecological and cost-controlled building technology of monolithic walls that can combine the use of low carbon footprint materials, such as earth, fibres and lime using an invasive species: giant reed cane (Arundo Donax). This paper explains the development of this building technology through testing diverse prototypes.

Illness perception, knowledge and self-care about cervical cancer

Prevention plays a central role in early detection of cervical cancer. Common Sense Model proposes that the nature and organization of illness representations can guide actions related to health and how self-care is exercised. The aim of this study was to describe and compare illness perception, knowledge and self-care in women with and without cancer precursor lesions. Participants were 92 women (aged 18-59) from primary care unity divided into two groups: women with and without premalignant lesion. Measures for illness perception, knowledge and self-care were used. There was no statistically signifi cant difference (t test e chi-square test) between groups in the variables analyzed. Despite the risk for cervical cancer, women with precursor lesions do not adjust their illness perceptions, knowledge and self-care to the situation. These data show the need to warn women against the cervical cancer risks, because their distorted perceptions and lack of knowledge about the disease may hamper the screening and control of cervical cancer.

Ethical consumption (in)decisons

Consumers’ indecisions about the ethical value of their choices are amongst the highest concerns regarding ethical products’ purchasing. This is especially true for Fair Trade certified products where the ethical attribute information provided by the packaging is often unacknowledged by consumers. While well-informed consumers are likely to generate positive consumer reactions to ethical products and increase its ethical consumption, less knowledgeable buyers show different purchasing patterns. In such circumstances, decisions are often driven by socio-cultural beliefs about the low functional performance of ethical or sustainable attributes. For instance, products more congruent with sustainability (e.g., produce) are considered to be simpler but less tasty than less sustainable products. Less sustainable products instead, are considered to be more sophisticated and to provide consumers with more hedonic pleasures (e.g., chocolate mousse). The extent that ethicality is linked with experiences that provide consumers with more pain than pleasure is also manifested in pro-social social behaviors. More specifically through conspicuous self-sacrificial consumption experiences like running for charity in marathons with wide public exposure. The willingness of consumers to engage in such costly initiatives is moderated by gender differences and further, mediated by the chronic productivity orientation of some individuals to use time in a productive manner. Using experimental design studies, I show that consumers (1) use a set of affective and cognitive associations with on-package elements to interpret ethical attributes, (2) implicitly associate ethicality with simplicity, and that (3) men versus women show different preferences in their forms of contribution to pro-social causes.

Self-transcendence is related to higher female sexual desire

One facet of self-transcendence is creative self-forgetfulness (CSF; tendency to be attentionally absorbed in mindaltering experiences). Proneness to mind-altering attentional absorption and other aspects of self-transcendence were previously related to vaginal intercourse frequency, sexual arousability, and female coital orgasm. Given that sexual responsiveness is enhanced by focused attention, itwas testedwhether CSF correlates with sexual responsiveness, and if maladaptive defenses, openness to experience, and testosterone explain the hypothesized relationships. One hundred thirty-nine Portuguese (98 women) provided saliva samples for testosterone determination by luminescence immunoassays before and after a romantic movie scene and reported how intensely they felt sexual desire and arousal during the movie. CSF was measured by the Temperament and Character Inventory– Revised, maladaptive defenses by the immature defenses subscale of the Defense Style Questionnaire (DSQ-40), male and female past month desire by the desire dimensions of the International Index of Erectile Function (IIEF), and Female Sexual Function Index (FSFI). Female desire and arousal during themoviewere independently predicted by CSF, openness to experience and testosterone, but not by immature defenses. Female past month desire was independently predicted by CSF, testosterone, and less immature defenses. Possible psychobiological processes linking self-transcendence and sexual responsiveness are discussed.

Impact of insecticide resistance on the field control of Aedes aegypti in the State of São Paulo

IntroductionThe need to control dengue transmission by means of insecticides has led to the development of resistance to most of the products used worldwide against mosquitoes. In the State of São Paulo, the Superintendência de Controle de Endemias(SUCEN) has annually monitored the susceptibility of Aedes aegypti to insecticides since 1996; since 1999, surveys were conducted in collaboration with the National Network of Laboratories (MoReNAa Network) and were coordinated by the Ministry of Health. In this study, in addition to the biological characterization of insecticide resistance in the laboratory, the impact of resistance on field control was evaluated for vector populations that showed resistance in laboratory assays.MethodsField efficacy tests with larvicides and adulticides were performed over a 13-year period, using World Health Organization protocols.ResultsData from the field tests showed a reduction in the residual effect of temephos on populations with a resistance ratio of 3. For adults, field control was less effective in populations characterized as resistant in laboratory qualitative assays, and this was confirmed using qualitative assays and field evaluation.ConclusionsOur results indicated that management of resistance development needs to be adopted when insect populations show reduced susceptibility. The use of insecticides is a self-limiting tool that needs to be applied cautiously, and dengue control requires more sustainable strategies.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

Empowerment and intentions to resist future change: the moderating effect organization-based self-esteem

Nowadays, organizations face a constant need for adaptability, increasing the importance of change management. Our study focuses of how empowering leadership influences intentions to resist future changes, mediated by the effects of psychological and structural empowerment. From the responses of the two questionnaires (N1=230; Ntf=113), we found that empowering leadership fosters psychological and structural empowerment. Structural empowerment was the main driver in reducing intentions to resist future change when an employee has high organization-based self-esteem. Our findings add to the literature by examining how we can anticipate and manage change under an empowering context, building on social exchange and uncertainty reduction theories

How to reduce the causes of call center contact by implementing web self-service at Sonae MC?

This project aims to provide feasible solutions to improve customer´s Help Area at Continente Online. The goal is to increase satisfaction and loyalty by reducing the main causes that lead customers to appeal to Call Center or abandon the website. The pursued solution is the implementation of Web Self-Service and the vision taken is focused not only on providing customers basic help tools but also innovate with international best practices to sustain Sonae MC´s present and future market leader position. Customer´s feedback, costs and impact are taken in consideration to find the best fit for the company.

The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane are significantly important in order to maximize its benefits. Therefore, in this study, the effect of the fibre distribution and orientation on the post-cracking tensile behaviour of the steel fibre reinforced self-compacting concrete (SFRSCC) specimens is investigated. For this purpose, several cores were extracted from distinct locations of a panel and were subjected to indirect (splitting) and direct tensile tests. The local stress-crack opening relationship (σ-w) was obtained by modelling the splitting tensile test under the finite element framework and by performing an Inverse Analysis (IA) procedure. Afterwards the σ-w law obtained from IA is then compared with the one ascertained directly from the uniaxial tensile tests. Finally, the fibre distribution/orientation parameters were determined adopting an image analysis technique.

Self-monitoring of freeze–thaw damage using triphasic electric conductive concrete

The effect of freeze–thaw cycles on concrete is of great importance for durability evaluation of concrete structures in cold regions. In this paper, damage accumulation was studied by following the fractional change of impedance (FCI) with number of freeze–thaw cycles (N). The nano-carbon black (NCB), carbon fiber (CF) and steel fiber (SF) were added to plain concrete to produce the triphasic electrical conductive (TEC) and ductile concrete. The effects of NCB, CF and SF on the compressive strength, flexural properties, electrical impedance were investigated. The concrete beams with different dosages of conductive materials were studied for FCI, N and mass loss (ML), the relationship between FCI and N of conductive concrete can be well defined by a first order exponential decay curve. It is noted that this nondestructive and sensitive real-time testing method is meaningful for evaluating of freeze–thaw damage in concrete.

The influence of low-frequency noise pollution on the quality of life and place in sustainable cities: a case study from northern Portugal

Discussing urban planning requires rethinking sustainability in cities and building healthy environments. Historically, some aspects of advancing the urban way of life have not been considered important in city planning. This is particularly the case where technological advances have led to conflicting land use, as with the installation of power poles and building electrical substations near residential areas. This research aims to discuss and rethink sustainability in cities, focusing on the environmental impact of low-frequency noise and electromagnetic radiation on human health. It presents data from a case study in an urban space in northern Portugal, and focuses on four guiding questions: Can power poles and power lines cause noise? Do power poles and power lines cause discomfort? Do power poles and power lines cause discomfort due to noise? Can power poles and power lines affect human health? To answer these questions, we undertook research between 2014 and 2015 that was comprised of two approaches. The first approach consisted of evaluating the noise of nine points divided into two groups â near the sourceâ (e.g., up to 50 m from power poles) and â away from the sourceâ (e.g., more than 250 m away from the source). In the second approach, noise levels were measured for 72 h in houses located up to 20 m from the source. The groups consist of residents living within the distance range specified for each group. The measurement values were compared with the proposed criteria for assessing low-frequency noise using the DEFRA Guidance (University of Salford). In the first approach, the noise caused discomfort, regardless of the group. In the second approach, the noise had fluctuating characteristics, which led us to conclude that the noise caused discomfort.

Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Lightweight adjustable partition system: evaluation of resistance to horizontal loads and functional failure from impacts

This paper presents and discusses the results of the serviciability and use condition tests carried on an innovative solution for partitions, designated AdjustMembrane developed within a research project. The proposed system is a modular non-loadbearing wall, tensioned between the pavements and ceiling slabs, which are used as anchoring elements. It allows several advantages, related with the weight reduction to achieve a good sustainable performance, such as the reduction of construction costs, energy, and materials, and it is easy to recycle and to reuse, allowing self-construction. Apart from a general presentation of the partition technology, this paper presents and discusses the results of experimental tests carried out. From the results obtained, it is possible to conclude that the solution fulfils the requirements for this typology of wall in terms of resistance to horizontal loads induced by soft and hard body impacts.

Tensile stress–crack width law for steel fibre reinforced self-compacting concrete obtained from indirect (splitting) tensile tests

In this work, the fracture mode I parameters of steel fibre reinforced self-compacting concrete (SFRSCC) were derived from the numerical simulation of indirect splitting tensile tests. The combined experimental and numerical research allowed a comparison between the stress-crack width (σ - w) relationship acquired straightforwardly from direct tensile tests, and the σ - w response derived from inverse analysis of the splitting tensile tests results. For this purpose a comprehensive nonlinear 3D finite element (FE) modeling strategy was developed. A comparison between the experimental results obtained from splitting tensile tests and the corresponding FE simulations confirmed the good accuracy of the proposed strategy to derive the σ – w for these composites. It is concluded that the post-cracking tensile laws obtained from inverse analysis provided a close relationship with the ones obtained from the experimental uniaxial tensile tests.