Removal of arsenic from contaminated soils using different salt extractants

This study presents an environmental-friendly and cost effective method for the extraction of arsenic from contaminated soils.
Laboratory experiments using inorganic salts, potassium phosphate (KH2PO4), potassium chloride (KCl), potassium nitrate (KNO3), potassium sulfate (K2SO4), and sodium perchlorate (NaClO4) were evaluated as arsenic extractants. An Andosol soil was artificially contaminated with arsenite [As(III)] and arsenate [As(V)]. The soil was washed in a batch process with different salt solutions in the pH range 3–11 for 24 hours at 20◦C. Among the various potassium and sodium salts tested, KH2PO4 was found to be highly effective in extracting arsenic from As(III)-soil attaining more than 80% and 40% from As(V)-soil in neutral pH range. Other salts were particularly ineffective in extraction of arsenic from both soils. More arsenic was extracted more from the As(III)-soil than the As(V)-soil.

Synthesis, characterization and enantioselective free radical reductions of (1R,2S,5R)-menthyldiphenylgermane and its enantiomer

(1R,2S,5R)-Menthyldiphenylgermane and its enantiomer have been prepared in a few steps from germanium tetrachloride. The initial step in this sequence, namely the reaction between germanium tetrachloride and menthylmagnesium chloride, produces menthylgermanium trichloride, which is the exclusive product of this Grignard reaction, presumably due to the bulk of the menthyl group. When used at a low temperature (−78 °C) and in conjunction with Lewis acids, such as magnesium salts, these chiral germanes are capable of reducing ester functionalized radicals in high enantioselectivity, but in low-moderate yield. For example, (R)-naproxen ethyl ester was obtained in 15% yield and 99% ee by reaction in toluene of 2-bromonaproxen ethyl ester with (1R,2S,5R)-menthyldiphenylgermane in toluene at −78 °C in the presence of magnesium bromide. At 80 °C, (1R,2S,5R)-menthyldiphenylgermane reacted with primary alkyl radicals with a rate constant of 1.02 × 10⁶ M⁻¹ s⁻¹. Kinetic studies reveal the Arrhenius expression for this reaction to be: log(k/M⁻¹ s⁻¹) = (11.1 ± 0.4) − (34.6 ± 3.1)/θ where θ=2.3RT kJ mol⁻¹.

Optimization of process parameters for the production of naringinase by Aspergillus niger MTCC 1344

Aspergillus niger MTCC 1344 was used to produce extracellular naringinase in a complex (molasses, yeast extract and salts) medium. An initial medium pH 4.5 and cultivation temperature 30 °C were optimal for enzyme production. Among various carbon and organic nitrogen sources used, molasses and peptone were the most effective for enzyme yield. The rate of enzyme production was enhanced when metal ions were added to the medium. Fermentation conditions are described which produced a higher rate of enzyme synthesis. An increase in initial sugar concentration from 6 to 10 g l⁻¹ in the fermentation medium produced decreased naringinase synthesis while cell mass growth increased with the increase of sugar concentration. At a higher sugar level (10 g l⁻¹) the production of cell mass decreased.

Predicting the resistance of fired clay bricks to salt attack

The salt attack of Fired Clay Bricks (FCBs) causes surface damage that is aesthetically displeasing and eventually leads to structural damage. Methods for determining the resistances of FCBs to salt weathering have mainly tried to simulate the process by using accelerating aging tests. Most research in this area has concentrated on the types of salt that can cause damage and the damage that occurs during accelerated aging tests. This approach has lead to the use of accelerated aging tests as standard methods for determining resistance. Recently, it has been acknowledged that are not the most reliable way to determine salt attack resistance for all FCBs in all environments. Few researchers have examined FCBs with the aim of determining which material and mechanical properties make a FCB resistant to salt attack. The aim of this study was to identify the properties that were significant to the resistance of FCBs to salt attack. In doing so, this study aids in the development of a better test method to assess the resistance of FCBs to salt attack. The current Australian Standard accelerated aging test was used to measure the resistance of eight FCBs to salt attack using sodium sulfate and sodium chloride. The results of these tests were compared to the water absorption properties and the total porosity of FCBs. An empirical relationship was developed between the twenty-four-hour water absorption value and the number of cycles to failure from sodium sulfate tests. The volume of sodium chloride solution was found to be proportional to the total porosity of FCBs in this study. A phenomenological discussion of results led to a new mechanism being presented to explain the derivation of stress during salt crystallisation of anhydrous and hydratable salts. The mechanical properties of FCBs were measured using compression tests. FCBs were analysed as cellular materials to find that the elastic modules of FCBs was equivalent for extruded FCBs that had been fired a similar temperatures and time. Two samples were found to have significantly different elastic moduli of the solid microstructure. One of these samples was a pressed brick that was stiffer due to the extra bond that is obtained during sintering a closely packed structure. The other sample was an extruded brick that had more firing temperature and time compared with the other samples in this study. A non-destructive method was used to measure the indentation hardness and indentation stress-strain properties of FCBs. The indentation hardness of FCBs was found to be proportional to the uniaxial compression strength. In addition, the indentation hardness had a better linear correlation to the total porosity of FCBs except for those samples that had different elastic moduli of the solid microstructure. Fractography of exfoliated particles during salt cycle tests and compression tests showed there was a similar pattern of fracture during each failure. The results indicate there were inherent properties of a FCB that determines the size and shape of fractured particles during salt attack. The microstructural variables that determined the fracture properties of FCBs were shown to be important variables to include in future models that attempt to estimate the resistance of FCBs to salt attack.

Tunable wettability of polyimide films based on electrostatic self-assembly of ionic liquids

We have demonstrated that the surface wettability of negatively charged polyimide films could be turned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.

Benign recurrent intrahepatic cholestasis with secondary renal impairment treated with extracorporeal albumin dialysis

Benign recurrent intrahepatic cholestasis (BRIC) is a rare autosomal recessive condition characterized by intermittent episodes of pruritis and jaundice that may last days to months. Treatment is often ineffective and symptoms, particularly pruritis, can be severe. Extracorporeal albumin dialysis (molecular adsorbent recycling system, MARS) is a novel treatment which removes albumin bound toxins including bilirubin and bile salts. We describe a case of a 34-year-old man with BRIC and secondary renal impairment who, having failed standard medical therapy, was treated with MARS. The treatment immediately improved his symptoms, renal and liver function tests and appeared to terminate the episode of cholestasis. We conclude that MARS is a safe and effective treatment for BRIC with associated renal impairment.

Bronsted acidic ionic liquids derived from alkylamines as catalysts and mediums for Fischer esterification : study of structure–activity relationship

Esterification of acetic acid with 1-octanol was studied using a series of alkylammonium salts as Brønsted acidic ionic liquids. The following
ionic liquids were prepared and used as catalysts and mediums in the esterification reaction; [Et₃NH][HSO₄], [Et₃NH][H₂PO₄], [Et₃NH][BF₄],
[Et₃NH][p-CH₃C₆H₄SO₃], [Et₂(PhCH₂)NH][HSO₄], [n-Bu₃NH][HSO₄], [n-Oct₃NH][HSO₄], [Et₂NH₂][HSO₄], [Et₂NH₂][H₂PO₄], [Et₂NH₂]
[BF₄], [i-Pr₂NH₂][HSO₄], [EtNH₃][HSO₄], [EtNH₃][H₂PO₄], and [EtNH₃][BF₄]. Higher acidity of the anion in the ionic liquid resulted in high yield of the ester. Yield of the ester decreased with increase in the size of the cation. There was no phase separation in the reactions where size of anion and/or cation was bigger

Investigations into the parallel synthesis of novel pyrrole-oxazole analogues of the insecticide pirate

Investigations into the parallel synthesis of selected analogues of a structurally unique pyrrole-oxazole analogue of the pyrrole insecticide pirate, are reported. Acylaminoketone salts were obtained from ketobromides in moderate to high yields and excellent purity. A number of N-tosyl pyrroles were obtained; however, formation of the target acyl tosyl pyrroles was thwarted by the stereoelectronic effects of the pyrrole substituents. During the pyrrole subunit chemistry, an interesting pyrrole derivative, vinyl pyrrole, was isolated. By restricting diversity to the aryl subunit, the parallel synthesis of selected pyrrole-oxazoles in moderate purity, was achieved when electron-donating or no groups were present on the aryl ring.

Cation dynamics in dimethyl-pyrrolidinium-based solid-state ion conductors

Dimethyl-pyrrolidinum-based salts have been investigated by means of DSC, conductivity, NMR and Raman spectroscopy. The investigation aims to study the effect of the anion on the behaviour of the salt, in terms of plastic properties as well as rotational degrees of freedom of the cation. The materials range from the non-plastic iodide salt to the highly plastic BF₄ salt, which flows under its own weight at elevated temperatures. The different rotational and translational motions of the cations, and the difference between rotator and plastic phases are discussed.

Microscopic interactions in nanocomposite electrolytes

Nanocomposite electrolytes of a fully amorphous trifunctional polyether (3PEG) and poly- (methylene ethylene oxide) (PMEO) have been complexed with two lithium salts and nanoparticulate (~20 nm) fillers of TiO2 and Al2O3. Addition of the fillers to the polymer salt complexes shows a significant change in the conformational modes of both polymers, especially the D-LAM region between 200 and 400 cm-1, indicating a reduced segmental flexibility of the chain. These changes are more pronounced with the use of TiO2 than Al2O3. Incorporation of the nanoparticulate fillers to the electrolytes fails to influence the degree of ion association, suggesting that the number of charge carriers available for conduction in both polymers using both LiClO4 and LiCF3SO3 is not the source of any conductivity increase. Addition of the fillers, which was seen to increase the conductivity in PEO-based systems, generally lowers the conductivity in the present PMEO systems, while the addition of TiO2 has little or no effect except in the cases of 3PEG 1.5 and 1.25 mol/kg LiClO4. In this case, 10 wt % TiO2 provides a conductivity increase of half an order of magnitude at approximately 60 °C. We also report for the first time a Raman spectroscopy investigation into the PEO-based nanocomposite electrolytes. The present results are discussed in terms of the electrostatic interactions involving dielectric properties of the fillers, of special interest being the interactions between the polymer and the fillers and between the ionic species and the fillers, when the effect of crystallization can be ignored.

The corrosion inhibition mechanism of new rare earth cinnamate compounds — electrochemical studies

A combination of linear polarisation resistance (LPR) and cyclic potentiodynamic polarisation (CPP) measurements demonstrated that the lanthanum-4 hydroxy cinnamate compound could inhibit both the cathodic and anodic corrosion reactions on mild steel surfaces exposed to 0.01 M NaCl solutions. However, the dominating response was shown to vary with inhibitor concentration. At the concentrations for which the highest level of protection was achieved, both REM-4 hydroxy cinnamate (REM being lanthanum and mischmetal) displayed a strong anodic behaviour for mild steel and their inhibition performance, including their resistance against localised attack, improved with time.

Electrochemical impedance spectroscopy (EIS) measurements and modelling were carried out so as to propose a simple electrical model and correlate the extracted parameters to the inhibition mechanism put forward for REM-cinnamate based compounds. The results supported the high corrosion inhibition performance of the compounds as well as the build-up of a protective film with time. Based on a two-layer model the results suggested that the upper layer of the inhibitor film seemed to offer less resistance to the diffusion of electrochemically active species than the highly resistive inner layer at the film/metal interface.

Corrosion mitigation of mild steel by new rare earth cinnamate compounds

Corrosion rate measurements based on weight loss (i.e., mild steel immersed for seven days in 0.01 M NaCl) and linear polarization resistance (LPR) techniques have shown that even low concentrations (200 ppm) of cerium and lanthanum cinnamates are able to significantly inhibit corrosion. Of all the compounds investigated in this work Ce(4-methoxycinnamate)3· 2 H2O and La(4-methoxycinnamate)3· 2 H2O compounds exhibited the greatest inhibition and, in comparison with the component inhibitors, a synergy was clearly observed. The mechanism of corrosion inhibition was investigated using cyclic potentiodynamic polarization (CPP) measurements. The results suggest that La(4-nitrocinnamate)3· 2 H2O and Ce(4-methoxycinnamate)3· 2 H2O behave as mixed inhibitors and improve the resistance of steel against localized attack.

High mobility I− / I3− redox couple in a molecular plastic crystal: A potential new generation of electrolyte for solid-state photoelectrochemical cells

A series of new electrolyte materials based on a molecular plastic crystal doped by different iodide salts together with iodine have been prepared and characterized by thermal analysis, ionic conductivity, electrochemical and solid-state NMR diffusion measurements. In these materials, the plastic crystal phase of succinonitrile acts as a good matrix for the quaternary ammonium based iodides and iodine and appears to act in some cases as a solid-state “solvent” for the binary dopants. The materials were prepared by mixing the components in the molten state with subsequent cooling into the plastic crystalline state. This resulted in waxy-solid electrolytes in the temperature range from − 40 to 60 °C. The combination of structural variation of the cations, and fast redox couple diffusion (comparable with liquid-based electrolytes), as well as a high ionic conductivity of up to 3 × 10^{− 3} S cm^{− 1} at ambient temperature, make these materials very attractive for potential use in solid-state photoelectrochemical cells.

Dye-sensitized nanocrystalline solar cells incorporating ethylmethylimidazolium-based ionic liquid electrolytes

High-performance dye-sensitized solar cells incorporating electrochemically stable non-volatile electrolytes are especially desirable devices. In particular, ionic liquid systems based on ethylmethylimidazolium dicyanamide seem to be promising for this purpose. These have triggered our interest in the properties of further ethylmethylimidazolium-based ionic liquids with anions which are close relatives of dicyanamide. In this study, the effect of three different anions, tricyanomethanide, dicyanamide and thiocyanate, on the performance of dye-sensitized solar cells have been investigated. Both the short circuit photocurrent and conversion efficiency are increased with decreasing viscosity of the ionic liquids under comparable conditions. A conversion efficiency of 2.1% at 30% light intensity was observed for the cell containing the tricyanomethanide salt, which has lowest viscosity among the three ionic liquids, while efficiencies of 0.7% and 1.7% at the same light intensity were observed in the case of dicyanamide and thiocyanate salts, respectively, as an electrolyte.

Transport and phase dynamics of poly(vinyl pyrrolidone) doped plastically crystalline N-methyl-N-propylpyrrolidinium tetrafluoroborate

The plastic crystal phase forming N-methyl-N-propylpyrrolidinium tetrafluoroborate organic salt (P₁₃BF₄) was combined with 2, 5 and 10 wt.% poly(vinyl pyrrolidone) (PVP). The ternary 2 wt.% PVP/2 wt.% LiBF₄/P₁₃BF₄ was also investigated. Thermal analysis, conductivity, optical thermomicroscopy, and Nuclear Magnetic Resonance (¹¹B, ¹⁹F, ¹H, ⁷Li) were used to probe the fundamental transport processes. Both the onset of phase I and the final melting temperature were reduced with increasing additions of PVP. Conductivity in phase I was 2.6 × 10^{− 4} S cm^{− 1} 5.2 × 10^{− 4} S cm^{− 1} 1.1 × 10^{− 4} S cm^{− 1} and 3.9 × 10− 5 S cm− 1 for 0, 2, 5 and 10 wt.%PVP/P₁₃BF₄, respectively. Doping with 2 wt.% LiBF₄ increased the conductivity by up to an order of magnitude in phase II. Further additions of 2 wt.% PVP slightly reduced the conductivity, although it remained higher than for pure P₁₃BF₄.